Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

An Assessment of Differences Between Cloud Effective Particle Radius Retrievals for Marine Water Clouds from Three MODIS Spectral Bands

The Moderate Resolution Imaging Spectroradiometer (MODIS) cloud product provides three separate 1 km resolution retrievals of cloud particle effective radii (r (sub e)), derived from 1.6, 2.1 and 3.7 micron band observations. In this study, differences among the three size retrievals for maritime water clouds (designated as r (sub e), 1.6 r (sub e), 2.1 and r (sub e),3.7) were systematically investigated through a series of case studies and global analyses. Substantial differences are found between r (sub e),3.7 and r (sub e),2.1 retrievals (delta r (sub e),3.7-2.l), with a strong dependence on cloud regime. The differences are typically small, within +/- 2 micron, over relatively spatially homogeneous coastal stratocumulus cloud regions. However, for trade wind cumulus regimes, r (sub e),3.7 was found to be substantially smaller than r (sub e),2.1, sometimes by more than 10 micron. The correlation of delta r(sub e),3.7-2.1 with key cloud parameters, including the cloud optical thickness (tau), r (sub e) and a cloud horizontal heterogeneity index (H-sigma) derived from 250 m resolution MODIS 0.86 micron band observations, were investigated using one month of MODIS Terra data. It was found that differences among the three r (sub e) retrievals for optically thin clouds (tau <5) are highly variable, ranging from - 15 micron to 10 micron, likely due to the large MODIS retrieval uncertainties when the cloud is thin. The delta r (sub e),3.7-2.1 exhibited a threshold-like dependence on both r (sub e),2.l and H-sigma. The re,3.7 is found to agree reasonably well with re,2.! when re,2.l is smaller than about 15J-Lm, but becomes increasingly smaller than re,2.1 once re,2.! exceeds this size. All three re retrievals showed little dependence when H-sigma < 0.3 (defined as standard deviation divided by the mean for the 250 m pixels within a 1 km pixel retrieval). However, for H-=sigma >0.3, both r (sub e),1.6 and r (sub e),2.1 were seen to increase quickly with H-sigma. On the other hand, r (sub e),3.7 statistics showed little dependence on H-sigma and remained relatively stable over the whole range of H-sigma values. Potential contributing causes to the substantial r (sub e),3.7 and r (sub e),2.1 differences are discussed. In particular, based on both 1-D and 3-D radiative transfer simulations, we have elucidated mechanisms by which cloud heterogeneity and 3-D radiative effects can cause large differences between r (sub e),3.7 and r (sub e),2.l retrievals for highly inhomogeneous clouds. Our results suggest that the contrast in observed delta r (sub e)3.7-2.1 between cloud regimes is correlated with increases in both cloud r (sub e) and H-sigma. We also speculate that in some highly inhomogeneous drizzling clouds, vertical structure induced by drizzle and 3-D radiative effects might operate together to cause dramatic differences between r (sub e),3.7 and r (sub e),2.1 retrievals.

Platnick, Steven↗
DOE OSTI2026

Haze–cloud correlations mediated by supersaturation fluctuations

Atmospheric aerosol particles that contain water-soluble components can absorb water vapor in humid environments and form either haze particles or cloud droplets, depending on supersaturation conditions. Laboratory and in situ measurements have shown that haze particles and cloud droplets often coexist and compete for available water vapor in shallow clouds and fogs, especially under polluted conditions. It is expected that more aerosol particles can form more haze particles and cloud droplets, so that the haze and cloud number concentrations are positively correlated. However, recent large-eddy simulations show that haze and cloud number concentration can be negatively correlated under extremely polluted conditions. Haze–cloud interactions across different environmental settings remain poorly understood. In this study, experiments in a convection cloud chamber with the same aerosol injection rate show that, as supersaturation forcing increases (i.e., changing from polluted to clean conditions), the covariance between haze and cloud droplet number concentration changes from negative to positive and finally to zero. Large-eddy simulations (LES) of the cloud chamber with a fixed supersaturation forcing but varying aerosol injection rates show a similar result for the haze–cloud correlation: near zero in clean, mean-supersaturation-dominated activation conditions; positive in moderate, supersaturation-fluctuation-influenced activation conditions; and negative in polluted, supersaturation-fluctuation-dominated activation conditions. A theoretical covariance framework was developed to interpret this behavior based on the relative magnitude and signs of the correlations between supersaturation and the populations of haze and cloud droplets. Significantly, experiments, LES, and theory all yield the same three-regime behavior for the sign of the haze–cloud covariance. Furthermore, our results show that the haze–cloud covariance remains robust and easily measurable, thereby providing a useful metric for regime identification in the atmosphere, improving regime-aware parameterizations, and informing aerosol interventions such as fog dispersion, rainfall enhancement, and albedo modification.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2022

Assessment of Two Stochastic Cloud Subcolumn Generators Using Observed Fields of Vertically Resolved Cloud Extinction

We evaluate two stochastic subcolumn generators used in GCMs to emulate subgrid cloud variability enabling comparisons with satellite observations and simulations of certain physical processes. Our evaluation necessitated the creation of a reference observational dataset that resolves horizontal and vertical cloud variability. The dataset combines two CloudSat cloud products that resolve two-dimensional cloud optical depth variability of liquid, ice, and mixed phase clouds when blended at ~200 m vertical and ~ 2 km horizontal scales. Upon segmenting the dataset to individual “scenes”, mean profiles of the cloud fields are passed as input to generators that produce scene-level cloud subgrid variability. The assessment of generator performance at the scale of individual scenes and in a mean sense is largely based on inferred joint histograms that partition cloud fraction within predetermined combinations of cloud top pressure –cloud optical thickness ranges. Our main finding is that both generators tend to underestimate optically thin clouds, while one of them also tends to overestimate some cloud types of moderate and high optical thickness. Associated radiative flux errors are also calculated by applying a simple transformation to the cloud fraction histogram errors, and are found to approach values almost as high as 3 Wm-2 for the cloud radiative effect in the shortwave part of the spectrum.

cloud variability↗
NASA NTRS2023

Tropical Three-dimensional Cloud Climatology during El Niño Events with CALIPSO Level-3 Cloud Products

The El Niño–Southern Oscillation (ENSO) is a large-scale climatic phenomenon that originates in the tropical Pacific Ocean but affects global climate patterns. Its warm phase El Niño occurs irregularly every two to seven years and peaks in winter. A previous case study showed opposite cloud anomalies at high, middle and low altitude regions during a weak 2006/2007 El Niño and a moderate 2009/2010 El Niño, suggesting a non-linear response of tropical clouds to El Niño sea surface temperature (SST) forcing. To further understand the cloud response to SST, we examine the three-dimensional (3-D) cloud anomalies during all recent five El Niño events since 2006 using level-3 (L3) cloud products from the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) mission. During its 17+ years operation, CALIPSO delivered near-global measurements of cloud and aerosol profiles at unprecedented high resolution and sensitivity. In this work, we provide a comprehensive picture of cloud anomalies during El Niño, with a particular focus on thin cirrus clouds at high altitudes, which are challenging for passive sensor detection algorithms. Specifically, the vertical cloud anomalies are calculated with the L3 3-D Cloud Occurrence Product, the horizontal cloud anomalies are from the L3 Global Energy and Water Exchanges (GEWEX) product, and the ice cloud extinction profiles and ice water content are obtained from the L3 Ice Cloud product. These findings will improve current knowledge of ENSO from a new perspective.

El Nino↗
NASA NTRS1989

Operational implications of a cloud model simulation of space shuttle exhaust clouds in different atmospheric conditions

A three-dimensional cloud model was used to characterize the dominant influence of the environment on the Space Shuttle exhaust cloud. The model was modified to accept the actual heat and moisture from rocket exhausts and deluge water as initial conditions. An upper-air sounding determined the ambient atmosphere in which the cloud would grow. The model was validated by comparing simulated clouds with observed clouds from four actual Shuttle launches. Results are discussed with operational weather forecasters in mind. The model successfully produced clouds with dimensions, rise, decay, liquid water contents, and vertical motion fields very similar to observed clouds whose dimensions were calculated from 16 mm film frames. Once validated, the model was used in a number of different atmospheric conditions ranging from very unstable to very stable. Wind shear strongly affected the appearance of both the ground cloud and vertical column cloud. The ambient low-level atmospheric moisture governed the amount of cloud water in model clouds. Some dry atmospheres produced little or no cloud water. An empirical forecast technique for Shuttle cloud rise is presented and differences between natural atmospheric convection and exhaust clouds are discussed.

Zak, J. A.↗
NASA NTRS2002

Overlap Properties of Clouds Generated by a Cloud Resolving Model

In order for General Circulation Models (GCMs), one of our most important tools to predict future climate, to correctly describe the propagation of solar and thermal radiation through the cloudy atmosphere a realistic description of the vertical distribution of cloud amount is needed. Actually, one needs not only the cloud amounts at different levels of the atmosphere, but also how these cloud amounts are related, in other words, how they overlap. Currently GCMs make some idealized assumptions about cloud overlap, for example that contiguous cloud layers overlap maximally and non-contiguous cloud layers overlap in a random fashion. Since there are difficulties in obtaining the vertical profile of cloud amount from observations, the realism of the overlap assumptions made in GCMs has not been yet rigorously investigated. Recently however, cloud observations from a relatively new type of ground radar have been used to examine the vertical distribution of cloudiness. These observations suggest that the GCM overlap assumptions are dubious. Our study uses cloud fields from sophisticated models dedicated to simulate cloud formation, maintenance, and dissipation called Cloud Resolving Models . These models are generally considered capable of producing realistic three-dimensional representation of cloudiness. Using numerous cloud fields produced by such a CRM we show that the degree of overlap between cloud layers is a function of their separation distance, and is in general described by a combination of the maximum and random overlap assumption, with random overlap dominating as separation distances increase. We show that it is possible to parameterize this behavior in a way that can eventually be incorporated in GCMs. Our results seem to have a significant resemblance to the results from the radar observations despite the completely different nature of the datasets. This consistency is encouraging and will promote development of new radiative transfer codes that will estimate the radiation effects of multi-layer cloud fields more accurately.

Oreopoulos, L.↗
NASA NTRS2004

Clouds Aerosols Internal Affaires: Increasing Cloud Fraction and Enhancing the Convection

Clouds developing in a polluted environment have more numerous, smaller cloud droplets that can increase the cloud lifetime and liquid water content. Such changes in the cloud droplet properties may suppress low precipitation allowing development of a stronger convection and higher freezing level. Delaying the washout of the cloud water (and aerosol), and the stronger convection will result in higher clouds with longer life time and larger anvils. We show these effects by using large statistics of the new, 1km resolution data from MODIS on the Terra satellite. We isolate the aerosol effects from meteorology by regression and showing that aerosol microphysical effects increases cloud fraction by average of 30 presents for all cloud types and increases convective cloud top pressure by average of 35mb. We analyze the aerosol cloud interaction separately for high pressure trade wind cloud systems and separately for deep convective cloud systems. The resultant aerosol radiative effect on climate for the high pressure cloud system is: -10 to -13 W/sq m at the top of the atmosphere (TOA) and -11 to -14 W/sq m at the surface. For deeper convective clouds the forcing is: -4 to -5 W/sq m at the TOA and -6 to -7 W/sq m at the surface.

Koren, Ilan↗
NASA NTRS2005

Validation of AIRS/AMSU Cloud Retrievals Using MODIS Cloud Analyses

The AIRS/AMSU (flying on the EOS-AQUA satellite) sounding retrieval methodology allows for the retrieval of key atmospheric/surface parameters under partially cloudy conditions (Susskind et al.). In addition, cloud parameters are also derived from the AIRS/AMSU observations. Within each AIRS footprint, cloud parameters at up to 2 cloud layers are determined with differing cloud top pressures and effective (product of infrared emissivity at 11 microns and physical cloud fraction) cloud fractions. However, so far the AIRS cloud product has not been rigorously evaluated/validated. Fortunately, collocated/coincident radiances measured by MODIS/AQUA (at a much lower spectral resolution but roughly an order of-magnitude higher spatial resolution than that of AIRS) are used to determine analogous cloud products from MODIS. This allows us for a rather rare and interesting possibility: the intercomparisons and mutual validation of imager vs. sounder-based cloud products obtained from the same satellite positions. First, we present results of small-scale (granules) instantaneous intercomparisons. Next, we will evaluate differences of temporally averaged (monthly) means as well as the representation of inter-annual variability of cloud parameters as presented by the two cloud data sets. In particular, we present statistical differences in the retrieved parameters of cloud fraction and cloud top pressure. We will investigate what type of cloud systems are retrieved most consistently (if any) with both retrieval schemes, and attempt to assess reasons behind statistically significant differences.

Molnar, Gyula I.↗
NASA NTRS2007

Ice Cloud Properties in Ice-Over-Water Cloud Systems Using TRMM VIRS and TMI Data

A multi-layered cloud retrieval system (MCRS) is updated and used to estimate ice water path in maritime ice-over-water clouds using Visible and Infrared Scanner (VIRS) and TRMM Microwave Imager (TMI) measurements from the Tropical Rainfall Measuring Mission spacecraft between January and August 1998. Lookup tables of top-of-atmosphere 0.65- m reflectance are developed for ice-over-water cloud systems using radiative transfer calculations with various combinations of ice-over-water cloud layers. The liquid and ice water paths, LWP and IWP, respectively, are determined with the MCRS using these lookup tables with a combination of microwave (MW), visible (VIS), and infrared (IR) data. LWP, determined directly from the TMI MW data, is used to define the lower-level cloud properties to select the proper lookup table. The properties of the upper-level ice clouds, such as optical depth and effective size, are then derived using the Visible Infrared Solar-infrared Split-window Technique (VISST), which matches the VIRS IR, 3.9- m, and VIS data to the multilayer-cloud lookup table reflectances and a set of emittance parameterizations. Initial comparisons with surface-based radar retrievals suggest that this enhanced MCRS can significantly improve the accuracy and decrease the IWP in overlapped clouds by 42% and 13% compared to using the single-layer VISST and an earlier simplified MW-VIS-IR (MVI) differencing method, respectively, for ice-over-water cloud systems. The tropical distribution of ice-over-water clouds is the same as derived earlier from combined TMI and VIRS data, but the new values of IWP and optical depth are slightly larger than the older MVI values, and exceed those of single-layered layered clouds by 7% and 11%, respectively. The mean IWP from the MCRS is 8-14% greater than that retrieved from radar retrievals of overlapped clouds over two surface sites and the standard deviations of the differences are similar to those for single-layered clouds. Examples of a method for applying the MCRS over land without microwave data yield similar differences with the surface retrievals. By combining the MCRS with other techniques that focus primarily on optically thin cirrus over low water clouds, it will be possible to more fully assess the IWP in all conditions over ocean except for precipitating systems.

Minnis, Patrick↗
NASA NTRS2008

The Impact of Aerosols on Cloud and Precipitation Processes: Cloud-Resolving Model Simulations

Aerosols and especially their effect on clouds are one of the key components of the climate system and the hydrological cycle [Ramanathan et al., 2001]. Yet, the aerosol effect on clouds remains largely unknown and the processes involved not well understood. A recent report published by the National Academy of Science states "The greatest uncertainty about the aerosol climate forcing - indeed, the largest of all the uncertainties about global climate forcing - is probably the indirect effect of aerosols on clouds [NRC, 2001]." The aerosol effect on clouds is often categorized into the traditional "first indirect (i.e., Twomey)" effect on the cloud droplet sizes for a constant liquid water path [Twomey, 1977] and the "semi-direct" effect on cloud coverage [e.g., Ackerman et al ., 2001]." Enhanced aerosol concentrations can also suppress warm rain processes by producing a narrow droplet spectrum that inhibits collision and coalescence processes [e.g., Squires and Twomey, 1961; Warner and Twomey, 1967; Warner, 1968; Rosenfeld, 19991. The aerosol effect on precipitation processes, also known as the second type of aerosol indirect effect [Albrecht, 1989], is even more complex, especially for mixed-phase convective clouds. Table 1 summarizes the key observational studies identifying the microphysical properties, cloud characteristics, thermodynamics and dynamics associated with cloud systems from high-aerosol continental environments. For example, atmospheric aerosol concentrations can influence cloud droplet size distributions, warm-rain process, cold-rain process, cloud-top height, the depth of the mixed phase region, and occurrence of lightning. In addition, high aerosol concentrations in urban environments could affect precipitation variability by providing an enhanced source of cloud condensation nuclei (CCN). Hypotheses have been developed to explain the effect of urban regions on convection and precipitation [van den Heever and Cotton, 2007 and Shepherd, 2005]. Please see Tao et al. (2007) for more detailed description on aerosol impact on precipitation. Recently, a detailed spectral-bin microphysical scheme was implemented into the Goddard Cumulus Ensemble (GCE) model. Atmospheric aerosols are also described using number density size-distribution functions. A spectral-bin microphysical model is very expensive from a computational point of view and has only been implemented into the 2D version of the GCE at the present time. The model is tested by studying the evolution of deep tropical clouds in the west Pacific warm pool region and summertime convection over a mid-latitude continent with different concentrations of CCN: a low "clean" concentration and a high "dirty" concentration. The impact of atmospheric aerosol concentration on cloud and precipitation will be investigated.

Tao, Wei-Kuo↗
NASA NTRS2010

Evaluation of Satellite-Based Upper Troposphere Cloud Top Height Retrievals in Multilayer Cloud Conditions During TC4

Upper troposphere cloud top heights (CTHs), restricted to cloud top pressures (CTPs) less than 500 hPa, inferred using four satellite retrieval methods applied to Twelfth Geostationary Operational Environmental Satellite (GOES-12) data are evaluated using measurements during the July August 2007 Tropical Composition, Cloud and Climate Coupling Experiment (TC4). The four methods are the single-layer CO2-absorption technique (SCO2AT), a modified CO2-absorption technique (MCO2AT) developed for improving both single-layered and multilayered cloud retrievals, a standard version of the Visible Infrared Solar-infrared Split-window Technique (old VISST), and a new version of VISST (new VISST) recently developed to improve cloud property retrievals. They are evaluated by comparing with ER-2 aircraft-based Cloud Physics Lidar (CPL) data taken during 9 days having extensive upper troposphere cirrus, anvil, and convective clouds. Compared to the 89% coverage by upper tropospheric clouds detected by the CPL, the SCO2AT, MCO2AT, old VISST, and new VISST retrieved CTPs less than 500 hPa in 76, 76, 69, and 74% of the matched pixels, respectively. Most of the differences are due to subvisible and optically thin cirrus clouds occurring near the tropopause that were detected only by the CPL. The mean upper tropospheric CTHs for the 9 days are 14.2 (+/- 2.1) km from the CPL and 10.7 (+/- 2.1), 12.1 (+/- 1.6), 9.7 (+/- 2.9), and 11.4 (+/- 2.8) km from the SCO2AT, MCO2AT, old VISST, and new VISST, respectively. Compared to the CPL, the MCO2AT CTHs had the smallest mean biases for semitransparent high clouds in both single-layered and multilayered situations whereas the new VISST CTHs had the smallest mean biases when upper clouds were opaque and optically thick. The biases for all techniques increased with increasing numbers of cloud layers. The transparency of the upper layer clouds tends to increase with the numbers of cloud layers.

Chang, Fu-Lung↗
NASA NTRS2019

The Impact of Neglecting Ice Phase on Cloud Optical Depth Retrievals from AERONET Cloud Mode Observations

Clouds present many challenges to climate modelling. To develop and verify the parameterisations needed to allow climate models to represent cloud structure and processes, there is a need for high-quality observations of cloud optical depth from locations around the world. Retrievals of cloud optical depth are obtainable from radiances measured by Aerosol Robotic Network (AERONET) radiometers in “cloud mode” using a two-wavelength retrieval method. However, the method is unable to detect cloud phase, and hence assumes that all of the cloud in a profile is liquid. This assumption has the potential to introduce errors into long term statistics of retrieved optical depth for clouds that also contain ice. Using a set of idealized cloud profiles we find that, for optical depths above 20, the fractional error in retrieved optical depth is a linear function of the fraction of the optical depth that is due to the presence of ice cloud (“ice fraction”). Clouds that are entirely ice have positive errors with magnitudes of the order of 55% to 70 %. We derive a simple linear equation that can be used as a correction at AERONET sites where ice fraction can be independently estimated. Using this linear equation, we estimate the magnitude of the error for a set of cloud profiles from five sites of the Atmospheric Radiation Measurement programme. The dataset contains separate retrievals of ice and liquid retrievals; hence ice fraction can be estimated. The magnitude of the error at each location was related to the relative frequencies of occurrence in thick frontal cloud at the mid-latitude sites and of deep convection at the tropical sites – that is, of deep cloud containing both ice and liquid particles. The long-term mean optical depth error at the five locations spans the range 2– 4, which we show to be small enough to allow calculation of top-of-atmosphere flux to within 10% and surface flux to about 15 %.

Shonk, Jonathan K. P.↗
NASA NTRSDate not supplied

NASA GLOBE CLOUD GAZE: Creating Data Quality Flags for Citizen Science Cloud Observations Matched to NASA Satellite Data

The GLOBE Program, NASA’s largest and longest lasting citizen science program about the Earth, has been collecting cloud observations matched to multiple satellite data daily. The program’s cloud protocol is historically the most popular protocol as your eyes are the only instruments you need to collect observations of the sky. This dataset includes over 3,300,000 cloud observations with variables like total cloud cover, cloud type and opacity that are collocated to the nearest overpass times of geostationary satellites (GOES-15, GOES-16, GOES-17, Meteosat-8, Meteosat-11, or Himawari-8), or to Clouds and the Earth’s Radiant Energy System (CERES) instruments onboard Aqua and Terra, or the Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) satellite. In order to increase the usability of this dataset, the Community science project Leveraging Online and User Data through GLOBE And Zooniverse Engagement (CLOUD GAZE) has been developed to generate data quality flags of these ground-up and top-down perspectives of sky and clouds. Recently funded through NASA’s Citizen Science for Earth Systems Program, CLOUD GAZE has partnered with the Zooniverse online platform to obtain reference data and image tagging of sky photographs collected through The GLOBE Program’s clouds protocol. This paper will present the GLOBE Clouds dataset matched to NASA satellite data, integration of CLOUD GAZE to develop data quality flags, and research applications of the dataset (includes ground-up and top-down perspective comparisons, ground observations of dust storms and smoke plumes, and cloud observations in polar regions). The paper will also present on techniques and recommendations for classroom use and for community engagement, particularly for those looking to online resources.

Marilé Colón Robles↗
DOE OSTI2025

Evaluating Mean State Cloud Properties in the Simple Cloud‐Resolving E3SM Atmosphere Model (SCREAM)

Accurately simulating clouds remains a key challenge in global climate models, primarily because cloud formation involves sub-grid processes that are parameterized and crudely represented in models. This study examines the performance of DOE's Simple Cloud-Resolving Energy Exascale Earth System (E3SM) Atmosphere Model (SCREAM) in simulating cloud properties and their spatio-temporal distribution by comparing against satellite observations. Two horizontal resolutions of SCREAM (3 and 12 km) are examined, and both depict a realistic spatial structure of mean-state cloud cover but underestimate its global mean magnitude. SCREAM 3 km reasonably reproduces the distribution of mean-state cloud properties across various cloud optical thickness and cloud-top pressure regimes, with performance comparable to CMIP5 and CMIP6 ensemble and marginally outperforming SCREAM 12 km. Still, SCREAM 3 km tends to underpredict low clouds and optically thin clouds, highlighting the need for continued improvement in representing unresolved processes. This study provides a basis for confidence in the representation of clouds in SCREAM, as simulating mean-state clouds is a necessary prerequisite for trusting its cloud responses to changes in aerosols and greenhouse gases.

Geosciences↗
DOE OSTI2025

Decomposing Cloud Radiative Feedbacks by Cloud-Top Phase

Changes in cloud scattering properties and emissivity that arise from atmospheric warming cause substantial radiative feedbacks in model projections of anthropogenic climate change, and the relative importance of the underlying mechanisms is poorly understood. One leading hypothesis is that ice-to-liquid conversions cause clouds to optically thicken, producing a major negative feedback. We test this hypothesis by developing a method to decompose cloud radiative feedbacks by cloud-top phase. The method is applied to an ensemble of six state-of-the-art global climate models run with prescribed sea surface temperature. In these simulations, the global mean of the net cloud scattering and emissivity feedback from cloud-phase conversions ranges from −0.17 to −0.01 W m −2 K −1 , while the overall net cloud feedback ranges from 0.02 to 0.91 W m −2 K −1 . The multimodel mean of the cloud scattering and emissivity feedback from cloud-phase conversions is approximately 19% of the magnitude of the multimodel mean of the overall cloud feedback (−0.10 vs 0.52 W m −2 K −1 ). These results indicate that cloud-phase conversions cause a robust negative feedback by changing cloud scattering and emissivity, but this mechanism makes a modest contribution to the overall cloud feedback at the global scale.

Climate change↗
NASA NTRS2014

OMMYDCLD: a New A-train Cloud Product that Co-locates OMI and MODIS Cloud and Radiance Parameters onto the OMI Footprint

Clouds cover approximately 60% of the earth's surface. When obscuring the satellite's field of view (FOV), clouds complicate the retrieval of ozone, trace gases and aerosols from data collected by earth observing satellites. Cloud properties associated with optical thickness, cloud pressure, water phase, drop size distribution (DSD), cloud fraction, vertical and areal extent can also change significantly over short spatio-temporal scales. The radiative transfer models used to retrieve column estimates of atmospheric constituents typically do not account for all these properties and their variations. The OMI science team is preparing to release a new data product, OMMYDCLD, which combines the cloud information from sensors on board two earth observing satellites in the NASA A-Train: Aura/OMI and Aqua/MODIS. OMMYDCLD co-locates high resolution cloud and radiance information from MODIS onto the much larger OMI pixel and combines it with parameters derived from the two other OMI cloud products: OMCLDRR and OMCLDO2. The product includes histograms for MODIS scientific data sets (SDS) provided at 1 km resolution. The statistics of key data fields - such as effective particle radius, cloud optical thickness and cloud water path - are further separated into liquid and ice categories using the optical and IR phase information. OMMYDCLD offers users of OMI data cloud information that will be useful for carrying out OMI calibration work, multi-year studies of cloud vertical structure and in the identification and classification of multi-layer clouds.

OMMYDCLD↗
NASA NTRS2015

Effect of Cloud Fraction on Near-Cloud Aerosol Behavior in the MODIS Atmospheric Correction Ocean Color Product

Characterizing the way satellite-based aerosol statistics change near clouds is important for better understanding both aerosol-cloud interactions and aerosol direct radiative forcing. This study focuses on the question of whether the observed near-cloud increases in aerosol optical thickness and particle size may be explained by a combination of two factors: (i) Near-cloud data coming from areas with higher cloud fractions than far-from-cloud data and (ii) Cloud fraction being correlated with aerosol optical thickness and particle size. This question is addressed through a statistical analysis of aerosol parameters included in the MODIS (MODerate resolution Imaging Spectroradiometer) ocean color product. Results from ten Septembers (2002-2011) over part of the northeast Atlantic Ocean confirm that the combination of these two factors working together explains a significant but not dominant part (in our case, 15%-30%) of mean optical thickness changes near clouds. Overall, the findings show that cloud fraction plays a large role in shaping the way aerosol statistics change with distance to clouds. This implies that both cloud fraction and distance to clouds are important to consider when aerosol-cloud interactions or aerosol direct radiative effects are examined in satellite or modeling studies.

Remote sensing↗
NASA NTRSDate not supplied

Assessment of Cloud Fraction Derived from a New Geostationary Satellite Cloud Retrieval Algorithm for CERES and Progress Towards Cross-platform Continuity

For over two decades The Clouds and the Earth’s Radiant Energy System (CERES) project has produced long-term records of top-of-atmosphere (TOA) and surface irradiances for detecting changes in the Earth’s radiation budget and advancing understanding of how clouds contribute to those changes. Accurate characterization of the spatial and temporal distributions of clouds are a critical component for producing CERES datasets. The CERES Cloud Working Group (CWG) derives cloud properties from both geostationary (GEO) and low-Earth orbit (LEO) satellite sensors in order to provide complete global coverage at hourly temporal resolution. However, the use of multiple sensors to provide this spatiotemporal coverage throughout a long-term record presents some challenges, because the various sensors generally have different spectral band characteristics (e.g., spectral band width and response) and spatial resolution. These differences can result in spatial artifacts at the coverage boundary between two sensors or temporal artifacts when one sensor replaces another in the record. For the upcoming Edition 5 release of CERES products, the CWG is developing cloud retrieval algorithms which utilize only spectral bands common to most modern passive satellite radiometers and account for differences in spectral width and response. The goal with this approach is to provide global cloud properties for CERES with greater cross-platform consistency than the previous Edition 4 products and thus mitigate artifacts which are evident at the interface of two sensors. This study focuses on retrieval of total cloud fraction from various GEO sensors, and we use Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) observations to assess the accuracy of total cloud fraction derived from the various sensors. The Edition 5 cloud mask algorithm depends on estimates of cloud-free TOA spectral radiances to differentiate clear and cloudy conditions, and CALIOP is used to assess the accuracy of those estimates when cloud-free conditions are indeed observed.

CALIOP↗