Search NASA⌕ Search

SEARCH · Search NASA

Results for “component analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing Part I: System Analysis, Component Identification, Additive Manufacturing, and Testing of Polymer Composites

The research and development activities reported in this publication were carried out under NASA Aeronautics Research Institute (NARI) funded project entitled "A Fully Nonmetallic Gas Turbine Engine Enabled by Additive Manufacturing." The objective of the project was to conduct evaluation of emerging materials and manufacturing technologies that will enable fully nonmetallic gas turbine engines. The results of the activities are described in three part report. The first part of the report contains the data and analysis of engine system trade studies, which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. The technical scope of activities included an assessment of the feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composites, which were accomplished by fabricating prototype engine components and testing them in simulated engine operating conditions. The manufacturing process parameters were developed and optimized for polymer and ceramic composites (described in detail in the second and third part of the report). A number of prototype components (inlet guide vane (IGV), acoustic liners, engine access door) were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included turbine nozzle components. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

acoustic liners↗
NASA NTRS2012

NASA's Carbon Monitoring System Flux-Pilot Project: A Multi-Component Analysis System for Carbon-Cycle Research and Monitoring

The importance of greenhouse gas increases for climate motivates NASA s observing strategy for CO2 from space, including the forthcoming Orbiting Carbon Observatory (OCO-2) mission. Carbon cycle monitoring, including attribution of atmospheric concentrations to regional emissions and uptake, requires a robust modeling and analysis infrastructure to optimally extract information from the observations. NASA's Carbon-Monitoring System Flux-Pilot Project (FPP) is a prototype for such analysis, combining a set of unique tools to facilitate analysis of atmospheric CO2 along with fluxes between the atmosphere and the terrestrial biosphere or ocean. NASA's analysis system is unique, in that it combines information and expertise from the land, oceanic, and atmospheric branches of the carbon cycle and includes some estimates of uncertainty. Numerous existing space-based missions provide information of relevance to the carbon cycle. This study describes the components of the FPP framework, assessing the realism of computed fluxes, thus providing the basis for research and monitoring applications. Fluxes are computed using data-constrained terrestrial biosphere models and physical ocean models, driven by atmospheric observations and assimilating ocean-color information. Use of two estimates provides a measure of uncertainty in the fluxes. Along with inventories of other emissions, these data-derived fluxes are used in transport models to assess their consistency with atmospheric CO2 observations. Closure is achieved by using a four-dimensional data assimilation (inverse) approach that adjusts the terrestrial biosphere fluxes to make them consistent with the atmospheric CO2 observations. Results will be shown, illustrating the year-to-year variations in land biospheric and oceanic fluxes computed in the FPP. The signals of these surface-flux variations on atmospheric CO2 will be isolated using forward modeling tools, which also incorporate estimates of transport error. The results will be discussed in the context of interannual variability of observed atmospheric CO2 distributions.

Pawson, S.↗
NASA NTRS1988

A preliminary component analysis of a Mach-7 hypersonic vehicle

As research continues in the development of an aircraft capable of travelling at hypersonic flight velocities, both the propulsion and thermal management systems stand out as areas requiring innovative technological breakthroughs. For propulsion, the difficulty involves efficiently compressing and combusting hydrogen in a supersonic stream, i.e., developing a viable scramjet with thermal management, the challenge lies in development of materials and active cooling systems capable of handling the enormous heat fluxes associated with hypersonic flight. This paper focuses on these problems and presents component designs for both an active cooling system and an all-external-compression scramjet. These systems are mated to a Mach-6 passenger cruise aircraft whose aerodynamic configuration was derived from an optimization of NASA windtunnel test results. The following outlines the development of the configuration and then focuses in on the design of the two component systems.

Source record↗
NASA NTRS1981

Some aspects of analytical chemistry as applied to water quality assurance techniques for reclaimed water: The potential use of X-ray fluorescence spectrometry for automated on-line fast real-time simultaneous multi-component analysis of inorganic pollutants in reclaimed water

The potential use of isotopically excited energy dispersive X-ray fluorescence (XRF) spectrometry for automated on line fast real time (5 to 15 minutes) simultaneous multicomponent (up to 20) trace (1 to 10 parts per billion) analysis of inorganic pollutants in reclaimed water was examined. Three anionic elements (chromium 6, arsenic and selenium) were studied. The inherent lack of sensitivity of XRF spectrometry for these elements mandates use of a preconcentration technique and various methods were examined, including: several direct and indirect evaporation methods; ion exchange membranes; selective and nonselective precipitation; and complexation processes. It is shown tha XRF spectrometry itself is well suited for automated on line quality assurance, and can provide a nondestructive (and thus sample storage and repeat analysis capabilities) and particularly convenient analytical method. Further, the use of an isotopically excited energy dispersive unit (50 mCi Cd-109 source) coupled with a suitable preconcentration process can provide sufficient sensitivity to achieve the current mandated minimum levels of detection without the need for high power X-ray generating tubes.

Ling, A. C.↗
NASA NTRS1983

A closed-loop principal component analysis of a tetrahedral truss

A tetrahedral truss, representative of a fairly broad class of large space structures, is considered. A method, measuring the dynamical importance of each elastic mode when the structure is under feedback control, is presented. The main conclusion is that the closed-loop importance of each vibration mode depends on the robustness requirements. Also, there appears to be a conflict between precise control of a given node of the structure and stability margin, these two requirements leading to contradictory classifications of the modes by order of importance.

Jonckheere, E. A.↗
NASA NTRS1993

Passive microwave remote sensing of thin sea ice using principal component analysis

The possibility of developing a satellite-based sea-ice-concentration algorithm which solves for the presence of thinner ice is explored on the basis of time sequences of surface-based measurements of passive MW emission from growing saline ice reported by Wensnahan et al. (1993). It is shown that two classes of thinner ice can be distinguished from mixtures of open water, first-year ice, and multiyear ice. Newly formed ice appears to be optically thick at 37 and 90 GHz and has a relatively dry surface. The thin ice spectrum occurs when the ice is greater than 4 cm thick and appears to result from the accumulation of brine at the ice surface. Thin ice has a relatively stable spectrum characterized by high brightness temperatures, a near-zero spectral gradient at vertical polarization, and a large difference between vertical and horizontal polarizations. It is concluded that thin ice can be detected using satellite data.

Wensnahan, Mark↗
NASA NTRS1998

Principal Component Analysis for Biosignature Detection in Extraterrestrial Samples

Analysis of extraterrestrial samples for organic signatures of past or present life presents several problems. Chief among these is distinguishing bonafide extraterrestrial organic material from terrestrial contamination, either carried on a spacecraft or present in the terrestrial environment to which the sample is exposed. A related problem is separating biologically derived molecules from those produced by abiotic syntheses in the interstellar medium, on meteorite parent bodies, or in planetary atmospheres and oceans.

McDonald, G. D.↗
NASA NTRS2010

Principal Components Analysis of Reflectance Spectra Returned by the Mars Exploration Rover Opportunity

The Mars Exploration Rover Opportunity has spent over six years exploring the Martian surface near its landing site at Meridiani Planum. Meridiani bedrock observed by the rover is largely characterized by sulfate-rich sandstones and hematite spherules, recording evidence of ancient aqueous environments [1]. The region is a deflationary surface, allowing hematite spherules, fragments of bedrock, and "cobbles" of foreign origin to collect loosely on the surface. These cobbles may be meteorites (e.g., Barberton, Heat Shield Rock, Santa Catarina) [2], or rock fragments of exotic composition derived from adjacent terranes or from the subsurface and delivered to Meridiani Planum as impact ejecta [3]. The cobbles provide a way to better understand Martian meteorites and the lithologic diversity of Meridiani Planum by examining the various rock types located there. In the summer of 2007, a global dust storm on Mars effectively disabled Opportunity's Miniature Thermal Emission Spectrometer (Mini-TES), which served as the Athena Science Team s primary tool for remotely identifying rocks of interest on a tactical timescale for efficient rover planning. While efforts are ongoing to recover use of the Mini-TES, the team is currently limited to identifying rocks of interest by visual inspection of images returned from Opportunity's Panoramic Camera (Pancam). This study builds off of previous efforts to characterize cobbles at Meridiani Planum using a database of reflectance spectra extracted from Pancam 13-Filter (13F) images [3]. We analyzed the variability of rock spectra in this database and identified physical characteristics of Martian rocks that could potentially account for the observed variance. By understanding such trends, we may be able to distinguish between rock types at Meridiani Planum and regain the capability to remotely identify locally unique rocks.

Mercer, C. M.↗
NASA NTRS2010

Principal Components Analysis of Reflectance Spectra from the Mars Exploration Rover Opportunity

In the summer of 2007 a global dust storm on Mars effectively disabled Opportunity's Miniature Thermal Emission Spectrometer (Mini-TES), the primary instrument used by the Athena Science Team to identify locally unique rocks on the Martian surface. The science team needs another way to distinguish interesting rocks from their surroundings on a tactical timescale. This study was designed to develop the ability to identify locally unique rocks on the Martian surface remotely using the Mars Exploration Rovers' Panoramica Camera (PanCam) instrument. Meridiani bedrock observed by Opportunity is largely characterized by sulfate-rich sandstones and hematite spherules. Additionally, loose fragments of bedrock and "cobbles" of foreign origin collet on the surface, some of which are interpreted as meteorites.

Mercer, C. M.↗
NASA NTRS2012

Using Principal Component Analysis (PCA) to Speed up Radiative Transfer (RT) Computations

Multiple scattering RT calculations time-consuming. Need a speed improvement of about 1000 (for OCO)! Solution: Make use of redundancies in spectra. Correlated-k (Lacis and Wang, Lacis and Oinas, Goody et al, Fu and Liou) Problem: Assume that spectral variation of atmospheric optical properties spatially correlated at all points along optical path. High accuracy (HI) and 2-stream (2S) calculations have high correlation. Single scattering (SS) computations highly scenario-dependent, but not time consuming. Perform SS and 2S calculations at every wavelength. Perform small number of HI computations. Need to compute correction factor B at every wavelength.

data sets↗
NASA NTRS2015

Principle Component Analysis of AIRS and CrIS Data

Synthetic Eigen Vectors (EV) used for the statistical analysis of the PC reconstruction residual of large ensembles of data are a novel tool for the analysis of data from hyperspectral infrared sounders like the Atmospheric Infrared Sounder (AIRS) on the EOS Aqua and the Cross-track Infrared Sounder (CrIS) on the SUOMI polar orbiting satellites. Unlike empirical EV, which are derived from the observed spectra, the synthetic EV are derived from a large ensemble of spectra which are calculated assuming that, given a state of the atmosphere, the spectra created by the instrument can be accurately calculated. The synthetic EV are then used to reconstruct the observed spectra. The analysis of the differences between the observed spectra and the reconstructed spectra for Simultaneous Nadir Overpasses of tropical oceans reveals unexpected differences at the more than 200 mK level under relatively clear conditions, particularly in the mid-wave water vapor channels of CrIS. The repeatability of these differences using independently trained SEV and results from different years appears to rule out inconsistencies in the radiative transfer algorithm or the data simulation. The reasons for these discrepancies are under evaluation.

infrared↗