Search NASA⌕ Search

SEARCH · Search NASA

Results for “compounding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Disentangling atmospheric, hydrological, and coupling uncertainties in compound flood modeling within a coupled Earth system model

Compound riverine and coastal flooding is usually driven by complex interactions among meteorological, hydrological, and ocean extremes. However, existing efforts to model this phenomenon often do not integrate hydrological processes across atmosphere–land–river–ocean systems, leading to substantial uncertainties that have not been fully examined. To bridge this gap, we leverage the new capabilities of the Energy Exascale Earth System Model (E3SM) that enable a multi-component framework that integrates coastally refined atmospheric, terrestrial, and oceanic components. We evaluate compound uncertainties arising from two-way land–river–ocean coupling in E3SM and track the cascading meteorological and hydrological uncertainties through ensemble simulations over the Delaware River basin and estuary during Hurricane Irene (2011). Our findings highlight the importance of two-way river–ocean coupling to compound flood modeling and demonstrate E3SM's capability in capturing compound flood extent near the coast, with a hit rate over 0.75. Our study shows the growing uncertainties that transition from atmospheric forcings to flood distribution and severity. Furthermore, an analysis based on artificial neural networks is used to assess the roles of hydrological drivers, such as infiltration and soil moisture, in the generation of compound flooding. The response of compound floods to tropical cyclones (TCs) is found to be susceptible to these often overlooked drivers. For instance, the flooded area could increase more than 2-fold (∼2.4) if Hurricane Irene were preceded by an extreme antecedent soil moisture condition (AMC). The results not only support the use of a multi-component framework for interactive flooding processes, but also underscore the necessity of broader definitions of compound flooding that encompass the simultaneous occurrence of intense precipitation, storm surge, and high AMC during TCs.

Feng, Dongyu [Pacific Northwest National Laborator↗
DOE OSTI2021

Process for selectively recovering a phenolic compound from feedstock comprising bio-crude and/or bio-oil

A process for selectively recovering a phenolic compound from feedstock comprising bio-crude and/or bio-oil is described. The recovery efficiency of the selected phenolic compound is greater than 70 wt % and the purity of the recovered selected phenolic compound is higher than 80 wt %. The process comprises distilling the feedstock to isolate the selected phenolic compound in a first distillate fraction comprising the selected phenolic compound, concentrating the selected phenolic compound from the first distillate fraction in a concentrated mixture, and purifying the concentrated mixture to recover the selected phenolic compound.

Mante, Ofei D.↗
DOE OSTI2022

Density functional theory study of formation and diffusion of hydrogen, deuterium, and tritium in Pd-V intermetallic compounds

Permeation of hydrogen isotopes in palladium/vanadium bimetallic membranes is known to deteriorate over time because of Pd-V interdiffusion. Additionally, intermetallic compounds may form in the interdiffusion region. Density functional theory is employed to study how Pd-V compounds may affect the permeation. Three compounds Pd 8 V, alpha-Pd 2 V, and PdV 4 are explored in this study. Formation and migration energies of hydrogen, deuterium, and tritium are calculated and subsequently compared to the data in pure Pd and V metals. The calculations show that both the formation and migration energies in the compounds are higher than in the pure metals. Thus, the permeation of these isotopes in the compounds is lower than in the pure metals. In addition, the least permeable compound is the one near the middle of the composition range, i.e. the alpha-Pd 2 V. The results provide atomistic insight for the permeation reduction in Pd/V membranes as interdiffusion progresses.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dual-Emitting Cyclometalated Platinum Compounds with Isocyanide Ligands

Cyclometalated platinum(II) compounds with both C^N chelating iminic ligands and isocyanide ligands were synthesized. Two sets of compounds from the reaction of two separate HC^N ligands (derived from thiophene or benzene) with [Pt2Me4(μ-SMe 2 ) 2 ] were obtained, resulting in square planar compounds with an anionic C^N ligand, a methyl ligand, and a dimethyl sulfide (dms) ligand completing the coordination sphere. Subsequently, the dms ligand was easily substituted by several isocyanide ligands (2-naphthyl, adamantyl, 2,6-dimethylphenyl, ptoluenesulfonylmethyl). The compounds were characterized by multinuclear NMR spectroscopy, IR spectroscopy, and singlecrystal X-ray diffraction (SCXRD). Their photophysical properties were explored using UV/vis, emission, and transient absorption (TA) spectroscopy. The emission spectra for the thiophene-derived compounds showed well-defined dual emission peaks, while the benzene-derived compounds’ bands appeared less resolved. DFT and TDDFT calculations were performed, and results were compared to the observed spectroscopic properties of the newly synthesized complexes.

Inorganic carbon compounds↗
DOE OSTI2025

Risk Assessment in a Chemical Laboratory Following an Explosive Incident Involving a Novel Diazonium Compound: Retrospective Analysis and Lessons Learned

Diazonium compounds are synthetically useful in the production of dyes and textiles, however they are highly explosive under dry conditions. Explosion prevention becomes more difficult when new diazonium compounds are synthesized, because while some syntheses include a counterion to increase their stability, this is not always a reliable method to prevent an explosive incident. Due to the uncertainty surrounding the explosiveness of different diazonium compounds, it is important to understand how to safely clean up after an incident and how to determine when it is safe to return a laboratory to typical operational use, particularly when the incident involves a novel compound where a standard does not exist for instrument calibration. Here, an explosive event is discussed involving the synthesis of 4-bromo-benzenediazonium-2-carboxylate. Following the explosive incident and 3-step cleanup, which involved a precautionary neutralization step, samples were collected from the fume hood where the incident occurred. Because the incident involved an unstable, novel compound that is not commercially available and was deemed unsafe to resynthesize for instrument calibration, we assessed the risk of further explosion by analyzing for the stable decomposition products. Mass spectrometry analysis confirmed that the residue in the fume hood contained 5-bromosalicylic acid, a decomposition product of 4-bromo-benzenediazonium-2-carboxylate. Samples were taken from multiple points in the fume hood and analyzed to estimate the spatial distribution of the decomposition product. Based on this analysis, we inferred that the primary decomposition product was far more abundant than residual energetic, indicating the energetic had been consumed or neutralized to a trace quantity where the risk of further explosion was low. Furthermore, the steps presented here─specifically, initial neutralization and then analyzing the spatial distribution of expected decomposition products to assess risk when a novel explosive material is detonated in a confined space─were our approach to assess further risk following an explosion due to a novel diazonium compound without the need for any further handling or resynthesis of the energetic. Here, we present our approach and critically analyze these steps by discussing retrospective lessons learned and alternative analytical approaches.

Computer simulations↗
DOE OSTI2025

Impacts of Precipitation Events on Concentrations of Oxygenated Gas- and Particle-Phase Compounds Observed in the Amazon

Removal of gases and particles by precipitation (wet deposition) is a critical process that significantly influences the transport and chemical transformation of atmospheric compounds. However, there are few studies that directly measure or constrain the rates of this process under real-world conditions. This work quantifies the net change in ambient concentrations during precipitation events (removal rates) of gas- and particle-phase organic compounds at a surface site near Manaus, Brazil, during the GoAmazon2014/5 campaign. Removal rates of identified and unknown compounds that have been previously classified into source-based clusters are measured during rain events and categorized based on estimated properties of compounds and clusters. Highly oxygenated gases, such as isoprene oxidation products, are removed during precipitation events with a median removal rate of 0.09 h –1 and the fastest analyte is removed at a rate of 0.22 h –1 . Removal rates of particle-phase compounds are observed at roughly this median rate, while less soluble gases, such as terpenes, exhibit low removal rates. These results are roughly in agreement with prior theoretical estimates of wet deposition rates for comparable compounds, providing an empirical point of comparison while noting that our metric reflects the net influence of precipitation events rather than wet deposition alone.

atmospheric chemistry↗
DOE OSTI2022

Release Timing and Duration Control the Fate of Photolytic Compounds in Stream-Hyporheic Systems

Predicting environmental fate requires an understanding of the underlying, spatiotemporally variable interaction of transport and transformation processes. Photolytic compounds, for example, interact with both time-variable photolysis and the perennially dark hyporheic zone, generating potentially unexpected dynamics that arise from time-variable reactivity. This interaction has been found to significantly impact environmental fate but is commonly oversimplified in predictive models. Our primary objective was to explore how time-variable photolysis and hyporheic storage interact across a range of photolysis rates to control the fate and transport of photolytic solutes in stream-hyporheic systems. In this study, we released a photolytic compound in a natural system at different times of day and simulated variable release timing and durations of photolytic compounds spanning half-lives ranging from about 2 min to 900 hr. To contextualize these results, we simulated five photolytic compounds with varied half-lives to systematically study the interaction between release timing, duration, and reactivity. We found that the environmental fate and transport of photolytic compounds are highly variable as a function of release timing, which controls when, where, and for how long solute is stored in the hyporheic zone or exposed to in-channel photolysis. Finally, this knowledge can be used to improve predictions for photolytic compounds or assess potential impacts for an anticipated discharge or treatment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

An idealized model for the crystal structure of intermetallic compounds isostructural with Mg 3 Cr 2 Al 18

Mg 3 Cr 2 Al 18 (abbreviated in this report as MCA) is the parent phase for a large class of intermetallic compounds that belong to the cubic crystal space group, $Fd\overline{3}m$. The purpose of this paper is to introduce an ideal, unrelaxed crystal structure for compounds isostructural with MCA. There are five distinct atomic sublattices in MCA compounds, which can be denoted, $A, B, C, D,$ and $E$. With this, a general description for MCA structures can be written as $A^{8a}_{1}B^{16c}_{2}C^{16d}_{2}D^{48f}_{6}E^{96g}_{12}$, where the superscripts represent the Wyckoff special equipoints associated with the various sublattices in MCA, and the subscripts indicate the contributions of each sublattice to the stoichiometry of one formula unit in an any given MCA structured compound. Sublattices D and E are where deviations from ideality occur in real, MCA-like compounds. This paper examines MCA bond lengths, nearest-neighbour polyhedral arrangements, 3-D sublattice crystal structures, 2-D atom tessellation patterns, and crystal chemical effects associated with atomic relaxations on the $D$ and $E$ sublattices. The ideal MCA crystal structure developed in this report provides an appropriate initial structure for use as input to crystal structure refinements of diffraction data for MCA-like phases being examined experimentally, or as input for computational, atomistic simulations of the structures of such compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effects of Serum and Compound Preparation Methods on Delayed Repolarization Evaluation With Human iPSC-CMs

Abstract Human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) have been widely used in the Comprehensive in vitro Proarrhythmia Assay (CiPA). The notable difference of the electrophysiological (EP) responses of hiPSC-CMs in serum and serum-free media (SFM) is puzzling and may impact regulatory decision-making on the cardiac safety of candidate drugs in inducing QT prolongation and torsade de pointes (TdP). In this study, we compared the EP responses of hiPSC-CMs to 10 CiPA compounds and moxifloxacin in serum and SFM; explained the potential reason behind the different EP responses—abiotic compound loss to plastic tubes/plates of hydrophobic compounds prepared in SFM; and investigated the impact of compound preparation methods on drug bioavailability in exposure media, which affects the TdP risk prediction of drugs tested in serum-containing and SFM. For assays to be conducted in SFM, awareness of abiotic compound loss of hydrophobic compounds in serum-free preparations is critical for delay repolarization evaluation and data extrapolation from in vitro to in vivo.

Toxicology↗
DOE OSTI2023

Relationship between magnetoresistance behavior and magnetic states in intercalated compounds Fe x TiS 2

Here, temperature and field-dependent neutron powder diffraction (NPD) measurements have been performed to reveal the nature of the unusual evolution of the magnetoresistance behavior with increasing Fe content in the intercalated compounds Fe x TiS 2 (with x=0.25,0.33,0.50,0.55) synthesized by solid-phase reaction method with prolonged homogenization heat treatment. As derived from neutron diffraction measurements, both the Fe 0.25 TiS 2 and the Fe 0.50 TiS 2 compound exhibit an antiferromagnetic (AFM) order below their respective Néel temperatures T N ≈52 K and T N ≈140K, which results in the presence of a large magnetoresistance accompanying the field-induced phase transition from AFM to the ferromagnetic (FM) state. At low temperatures, this AFM-FM transition is irreversible, confirmed by the irreversibility of changes in the NPD patterns and the presence of remnant magnetoresistance. In contrast, Fe 0.33 TiS 2 shows short-range magnetic order at T f ≈44 K due to a triangular network of intercalated Fe atoms and frustrations of exchange interactions with a field-induced FM alignment of Fe magnetic moments in an applied magnetic field as revealed by NPD measurements. The field-induced transformations of the cluster glass magnetic state in this compound lead to a significant decrease in electrical resistivity. According to NPD data, a reduced impact of an external magnetic field on the electrical resistivity of the compound Fe 0.55 TiS 2 can be ascribed to the presence of ferromagnetic or ferrimagnetic order in compounds with the Fe concentrations above x=0.50. The results obtained indicate that the distribution of the Fe atoms, along with their concentration in Fe x TiS 2 layered compounds, plays a decisive role in the formation of the magnetic state and the behavior of the magnetoresistance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Formation kinetics and thermodynamic stability of the Aurivillius compounds in Bi 4 Ti 3 O 12 –BiFeO 3 system

Abstract The Aurivillius compounds in the Bi 2 O 3 –Fe 2 O 3 –TiO 2 system, combining ferroelectric, semiconducting, and ferromagnetic properties, have attracted particular interest. Formation kinetics and thermodynamic stability are the fundamental knowledge needed for modeling and predicting the temporal microstructure and property evolution during materials processing but have not yet been addressed by quantitative experimental measurement. This article focuses on the Bi n +1 Fe n –3 Ti 3 O 3 n +3 Aurivillius compounds on the Bi 4 Ti 3 O 12 –BiFeO 3 tie‐line to elucidate the mechanisms and thermodynamic controls responsible for phase formation of compounds with various perovskite‐like layers. Five high‐purity Aurivillius compounds Bi 4 Ti 3 O 12 , Bi 5 FeTi 3 O 15 , Bi 6 Fe 2 Ti 3 O 18 , Bi 7 Fe 3 Ti 3 O 21 , and Bi 8 Fe 4 Ti 3 O 24 with integer n = 3–7 values were synthesized and their phase transformation properties and enthalpies of formation were studied by X‐ray diffraction in situ, high temperature differential scanning calorimetry, and high temperature oxide melt solution calorimetry. Thermodynamic stability of the compounds decreases with increasing n , and formation kinetics gradually slow down, demonstrating the inherent difficulty to synthesize pure Aurivillius compounds with n larger than 8. This difficulty was confirmed by an impurity phase coexisting with Bi 9 Fe 5 Ti 3 O 27 .

Gong, Weiping↗
DOE OSTI2025

Wide-ranging predictions of new stable compounds powered by recommendation engines

The computational search for new stable inorganic compounds is faster than ever, thanks to high-throughput density functional theory (DFT). However, stable compound searches remain highly expensive because of the enormous search space and the cost of DFT calculations. To aid these searches, recommendation engines have been developed. We conduct a systematic comparison of the performance of previously developed recommendation engines, specifically ones based on elemental substitution, data mining, and neural network prediction of formation enthalpy. After identifying ways to improve the recommendation engines, we find the neural network to be superior at recommending stable Heusler compounds. Armed with improved recommendation engines, we identify tens of thousands of compounds that are stable at zero temperature and pressure, now available in the Open Quantum Materials Database. We summarize this diverse pool of compounds, including the elusive mixed anion compounds, and two of their many applications: thermoelectricity and solar thermochemical fuel production.

Science & Technology - Other Topics↗
DOE OSTI2024

An expedited screening platform for the discovery of anti-ageing compounds in vitro and in vivo

Background: Restraining or slowing ageing hallmarks at the cellular level have been proposed as a route to increased organismal lifespan and healthspan. Consequently, there is great interest in anti-ageing drug discovery. However, this currently requires laborious and lengthy longevity analysis. Here, we present a novel screening readout for the expedited discovery of compounds that restrain ageing of cell populations in vitro and enable extension of in vivo lifespan. Methods: Using Illumina methylation arrays, we monitored DNA methylation changes accompanying long-term passaging of adult primary human cells in culture. This enabled us to develop, test, and validate the CellPopAge Clock, an epigenetic clock with underlying algorithm, unique among existing epigenetic clocks for its design to detect anti-ageing compounds in vitro. Additionally, we measured markers of senescence and performed longevity experiments in vivo in Drosophila, to further validate our approach to discover novel anti-ageing compounds. Finally, we bench mark our epigenetic clock with other available epigenetic clocks to consolidate its usefulness and specialisation for primary cells in culture. Results: We developed a novel epigenetic clock, the CellPopAge Clock, to accurately monitor the age of a population of adult human primary cells. We find that the CellPopAge Clock can detect decelerated passage-based ageing of human primary cells treated with rapamycin or trametinib, well-established longevity drugs. We then utilise the CellPopAge Clock as a screening tool for the identification of compounds which decelerate ageing of cell populations, uncovering novel anti-ageing drugs, torin2 and dactolisib (BEZ-235). We demonstrate that delayed epigenetic ageing in human primary cells treated with anti-ageing compounds is accompanied by a reduction in senescence and ageing biomarkers. Finally, we extend our screening platform in vivo by taking advantage of a specially formulated holidic medium for increased drug bioavailability in Drosophila. We show that the novel anti-ageing drugs, torin2 and dactolisib (BEZ-235), increase longevity in vivo. Conclusions: Our method expands the scope of CpG methylation profiling to accurately and rapidly detecting anti-ageing potential of drugs using human cells in vitro, and in vivo, providing a novel accelerated discovery platform to test sought after anti-ageing compounds and geroprotectors.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

X-ray absorption spectroscopy study of Mn reference compounds for Mn speciation in terrestrial surface environments

Abstract X-ray absorption spectroscopy (XAS) offers great potential to identify and quantify Mn species in surface environments by means of linear combination fit (LCF), fingerprint, and shell-fit analyses of bulk Mn XAS spectra. However, these approaches are complicated by the lack of a comprehensive and accessible spectrum library. Additionally, molecular-level information on Mn coordination in some potentially important Mn species occurring in soils and sediments is missing. Therefore, we investigated a suite of 32 natural and synthetic Mn reference compounds, including Mn oxide, oxyhydroxide, carbonate, phosphate, and silicate minerals, as well as organic and adsorbed Mn species, by Mn K-edge X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectroscopy. The ability of XAS to infer the average oxidation state (AOS) of Mn was assessed by comparing XANES-derived AOS with the AOS obtained from redox titrations. All reference compounds were studied for their local (<5 Å) Mn coordination environment using EXAFS shell-fit analysis. Statistical analyses were employed to clarify how well and to what extent individual Mn species (groups) can be distinguished by XAS based on spectral uniqueness. Our results show that LCF analysis of normalized XANES spectra can reliably quantify the Mn AOS within ~0.1 v.u. in the range +2 to +4. These spectra are diagnostic for most Mn species investigated, but unsuitable to identify and quantify members of the manganate and Mn(III)-oxyhydroxide groups. First-derivative XANES fingerprinting allows the unique identification of pyrolusite, ramsdellite, and potentially lithiophorite within the manganate group. However, XANES spectra of individual Mn compounds can vary significantly depending on chemical composition and/or crystallinity, which limits the accuracy of XANES-based speciation analyses. In contrast, EXAFS spectra provide a much better discriminatory power to identify and quantify Mn species. Principal component and cluster analyses of k2-weighted EXAFS spectra of Mn reference compounds implied that EXAFS LCF analysis of environmental samples can identify and quantify at least the following primary Mn species groups: (1) Phyllo- and tectomanganates with large tunnel sizes (2 × 2 and larger; hollandite sensu stricto, romanèchite, todorokite); (2) tectomanganates with small tunnel sizes (2 × 2 and smaller; cryptomelane, pyrolusite, ramsdellite); (3) Mn(III)-dominated species (nesosilicates, oxyhydroxides, organic compounds, spinels); (4) Mn(II) species (carbonate, phosphate, and phyllosilicate minerals, adsorbed and organic species); and (5) manganosite. All Mn compounds, except for members of the manganate group (excluding pyrolusite) and adsorbed Mn(II) species, exhibit unique EXAFS spectra that would allow their identification and quantification in mixtures. Therefore, our results highlight the potential of Mn K-edge EXAFS spectroscopy to assess bulk Mn speciation in soils and sediments. A complete XAS-based speciation analysis of bulk Mn in environmental samples should preferably include the determination of Mn valences following the “Combo” method of Manceau et al. (2012), EXAFS LCF analyses based on principal component and target transformation results, as well as EXAFS shell-fit analyses for the validation of LCF results. For this purpose, all 32 XAS reference spectra are provided in the Online Materials1 for further use by the scientific community.

Geochemistry & Geophysics↗
DOE OSTI2025

Final Technical Report on Investigation of Short-range Ordering in Transition Metal Compounds by Diffuse Scattering

Future energy needs and sustainability require new materials with novel properties for such applications as energy production, storage and transport and microelectronics. Quantum materials with several competing interactions at the electronic level offer tremendous opportunity to discover, design and tune properties for such applications. Although it has been recognized that small deviations in atomic positions, driven by the competing electronic interactions, in crystalline materials can have significant impact on properties, it remains a challenge to accurately characterize such deviations (short-range order) due to the lack of advanced instruments and analysis tools to characterize them. This project used the powerful neutron and x-ray scattering instruments recently developed at the DOE user facilities to address this challenge. New methods and efficient analysis tools were employed to uncover the hidden ordering that is behind the unique properties of transition metal compounds. One example of hidden order revealed by this project comes from vanadium (IV) oxide (VO 2 ) and related compounds. The project found that the chemical bonds in VO 2 compete against each other, unlike most crystalline compounds where the chemical bonds cooperate to yield the ordered structure. This helps explain why different measurements yielded different, competing pictures about the nature of VO 2 , which has led to disagreement about where its physical properties come from. Another example from this project of hidden ordering comes from a class of compounds known as condensed Chevrel phases, which are superconducting compounds that are generally believed to be non-magnetic. The neutron scattering methods used in this project revealed evidence of magnetism, which usually does not coexist with superconductivity. In this case, magnetism is believed to be one part of a special type of electronic behavior that can occur in compounds that have one-dimensional bonding character.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Diverse organic carbon dynamics captured by radiocarbon analysis of distinct compound classes in a grassland soil

Soil organic carbon (SOC) is a large, dynamic reservoir composed of a complex mixture of plant- and microbe-derived compounds with a wide distribution of cycling timescales and mechanisms. The distinct residence times of individual carbon components within this reservoir depend on a combination of factors, including compound reactivity, mineral association, and climate conditions. To better constrain SOC dynamics, bulk radiocarbon measurements are commonly used to trace biosphere inputs into soils and to estimate timescales of SOC cycling. However, understanding the mechanisms driving the persistence of organic compounds in bulk soil requires analyses of SOC pools that can be linked to plant sources and microbial transformation processes. Here, we adapt approaches, previously developed for marine sediments, to isolate organic compound classes from soils for radiocarbon ( 14 C) analysis. We apply these methods to a soil profile from an annual grassland in Hopland, California (USA), to assess changes in SOC persistence with depth (down to 1 m). We measured the radiocarbon values of water-extractable organic carbon (WEOC), total lipid extracts (TLEs), total hydrolyzable amino acids (AAs), and an acid-insoluble (AI) fraction from bulk and physically separated size fractions (< 2 mm, 2 mm–63 µm, and < 63 µm). Our results show that Δ 14 C values of bulk soil, size fractions, and extracted compound classes became more depleted with depth, and individual SOC components have distinct age–depth distributions that suggest distinguishable cycling rates. We found that AAs and TLEs cycle faster than the bulk soils and the AI fraction. The AI was the most 14 C-depleted fraction, indicating that it is the most chemically inert in this soil. Our approach enables the isolation and measurement of SOC fractions that separate functionally distinct SOC pools that can cycle relatively quickly (e.g., plant and microbial residues) from more passive or inert SOC pools (associated with minerals or petrogenic) from bulk soils and soil physical fractions. With the effort to move beyond SOC bulk analysis, we find that compound class 14 C analysis can improve our understanding of SOC cycling and disentangle the physical and chemical factors driving OC cycling rates and persistence.

58 GEOSCIENCES↗
DOE OSTI2021

Methods for fabricating thin film III-V compound solar cell

The present invention utilizes epitaxial lift-off in which a sacrificial layer is included in the epitaxial growth between the substrate and a thin film III-V compound solar cell. To provide support for the thin film III-V compound solar cell in absence of the substrate, a backing layer is applied to a surface of the thin film III-V compound solar cell before it is separated from the substrate. To separate the thin film III-V compound solar cell from the substrate, the sacrificial layer is removed as part of the epitaxial lift-off. Once the substrate is separated from the thin film III-V compound solar cell, the substrate may then be reused in the formation of another thin film III-V compound solar cell.

Pan, Noren↗
DOE OSTI2022

Simple Autoignition Model for the Derived Cetane Number of Oxygenated Compounds and Fuel Blends

A simple four-step autoignition model was used to derive an expression for the ignition delay and derived cetane number (DCN) measured by ignition quality testers (IQT) for oxygenated compounds and blends as a function of each compound’s global initiation and net chain branching rate constants. Expressions for these values were determined assuming they could be related to the functional groups present in a given compound. Measurements for 124 compounds and 94 binary and ternary blends, gathered from the literature and performed at UW-Madison, were used to obtain the explicit dependence of the measured ignition delay on each functional group. The new model was able to successfully describe the ignition behavior of both the compounds and blends, with an average DCN error of 5.0 (22%) and 3.5 (15%), respectively. Additionally, the blend model could naturally be modified into a mixing rule by incorporating existing IQT ignition delay data for each compound. Use of the mixing rule was found to offer improvements over the full prediction, with an average DCN error of 3.2 (14%).

09 BIOMASS FUELS↗