Search NASA⌕ Search

SEARCH · Search NASA

Results for “data logging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Cross-geography scientific data transferring trends and behavior

Wide area data transfers play an important role in many science applications but rely on expensive infrastructure that often delivers disappointing performance in practice. In response, we present a systematic examination of a large set of data transfer log data to characterize transfer characteristics, including the nature of the datasets transferred, achieved throughput, user behavior, and resource usage. This analysis yields new insights that can help design better data transfer tools, optimize networking and edge resources used for transfers, and improve the performance and experience for end users. Our analysis shows that (i) most of the datasets as well as individual files transferred are very small; (ii) data corruption is not negligible for large data transfers; and (iii) the data transfer nodes utilization is low. Insights gained from our analysis suggest directions for further analysis.

Liu, Zhengchun↗

On Road Testing Data

This dataset provides the following on road testing data: - Videos - In-vehicle dash camera videos during different testing scenarios. - Signal controller data - NTCIP log data and processed signal timing data from the corresponding signal controllers - Vehicle data - Vehicle data recorded during the testing, including GNSS, communication, CAN signals.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Site H - Event Log / Derived Data

This dataset contains the event log table that provides 10-minute wind statistics from the scanning lidar at AWAKEN's site H. This is a good dataset to start from for people unfamiliar with the AWAKEN project.

17 WIND ENERGY↗

Site A1 - Event Log / Derived Data

This dataset contains the event log table with 10-minute wind statistics from the scanning lidar at AWAKEN's site A1. This is a good dataset to start from for people unfamiliar with the AWAKEN project.

17 WIND ENERGY↗

Site A2 - Event Log / Derived Data

This dataset contains the event log table with 10-minute wind statistics from the scanning lidar at AWAKEN's site A2. This is a good dataset to start from for people unfamiliar with the AWAKEN project.

17 WIND ENERGY↗

Sites A1, A2, & H - Event Log / Derived Data

This dataset contains the event log table that provides 10-minute wind statistics from the scanning lidars at AWAKEN's sites A1, A2, and H. This is a good dataset to start from for people unfamiliar with the AWAKEN project.

17 WIND ENERGY↗

Malicious Cyber Activity Detection using Zigzag Persistence

In this study we synthesize zigzag persistence from topological data analysis with autoencoder-based approaches to detect malicious cyber activity, and derive analytic insights. Cybersecurity aims to safeguard computers, networks, and servers from various forms of malicious attacks, including network damage, data theft, and activity monitoring. We focus on the cybersecurity domain and investigate the detection of malicious activity using log data. We consider the dynamics of the log data and explore the changing topology of a hypergraph representation of this data to gain insights into the underlying activity. These hypergraphs capture complex interactions between processes, together with their temporal information. To study the changing topology we use zigzag persistence, which captures how topological features persist at multiple dimensions over time. We observe that this detects malicious activity in a cyber data set. To automate this detection we implement an autoencoder trained on a vectorization of the resulting zigzag persistence barcodes. Our experimental results demonstrate the effectiveness of the autoencoder in detecting malicious activity. Overall, this study highlights the potential of zigzag persistence and its combination with temporal hypergraphs for analyzing cybersecurity log data and detecting malicious behavior.

hypergraphs, temporal hypergraph, topological data↗

SECARB Collect Data via Logging, Testing, and Sampling and Distribute to Project Team

Data collection was conducted from Phase III Project start date with completion of the NEPA review in Spring for 2009, through an intense characterization period during well drilling in the summer of 2009, to the start of injection December 1, 2009. During the early stages of injection, data collection was very intense. With staff onsite on 24 hour shifts until January, 2010. Detailed data collection was completed episodically during 2010, with an high injection rate in a tracer study completed during the spring of 2010, and then a repeat seismic survey with borehole gravity, VSP, cross-well and sonic logging conducted during the fall of 2010. By the report date at the end of 2011, data had been compiled and distributed to the team for analysis.

54 ENVIRONMENTAL SCIENCES↗

CO 2 -SCREEN tool: Application to the oriskany sandstone to estimate prospective CO 2 storage resource

Here, the ability to accurately predict the CO 2 storage resource in saline formations is important to make high-level, energy-related government policy and business decisions. CO 2 -SCREEN (Storage prospeCtive Resource Estimation Excel aNalysis) is a tool developed by the United States Department of Energy – National Energy Technology Laboratory (US-DOE-NETL) to screen saline formations for prospective CO 2 storage resources. CO 2 -SCREEN uses DOE methods and equations to serve as a consistent mechanism for calculating prospective CO 2 storage resources. CO 2 -SCREEN is comprised of two files: an Excel file used for inputs and outputs and a GoldSim Player file used to run Monte Carlo simulations. CO 2 -SCREEN requires input of physical geologic parameters (i.e. thickness, porosity) as well as efficiency factor ranges (i.e. net-to-gross thickness) to calculate a mass storage estimate. An application of CO 2 -SCREEN is demonstrated here using well log data from the Oriskany Sandstone portion in Pennsylvania. The Oriskany Sandstone is divided into 20 km x 20 km grid cells in which 151 cells contain well log data. CO 2 -SCREEN calculates prospective CO 2 storage resource for each grid cell based on the well log data and uses lithology and depositional environment information for efficiency factor ranges. The Oriskany Sandstone CO 2 storage resource estimate for Pennsylvania, calculated by CO 2 -SCREEN, ranges from 0.07 to 1.28 gigatons (Gt) with a P 50 value of 0.32 Gt. This resource assessment analysis is done to demonstrate the use of CO 2 -SCREEN and results are comparable to previous studies which encourages the application of CO 2 -SCREEN to other saline formations and warrants exploring the expansion of this tool to assess the CO 2 storage resource in other formations such as shale and depleted oil and gas reservoirs.

03 NATURAL GAS↗

Drilling, Completion, and Data Collection Plans An Assessment of Geological Carbon Sequestration Options in the Illinois Basin: Phase III

Executive Summary The Illinois Basin – Decatur Project (IBDP) is managed by the Midwest Geological Sequestration Consortium (MGSC) and is led by the Illinois State Geological Survey (ISGS) at the University of Illinois. The project site is located on the Archer Daniels Midland Company (ADM) property in Decatur, Illinois, and is a fully integrated carbon capture and storage (CCS) project that uses CO₂ captured from the ethanol-producing fermentation process at the ADM corn-processing plant (Finley et. al., 2013). IBDP has a goal of injecting one million tonnes of CO₂ into the basal sands of the Mt. Simon Sandstone over a three-year period. This is a multifaceted project, and this report details the planning and results of the drilling, completions, well testing, log data acquisition, and the Health, Safety, and Environment (HSE) aspects of the project. Three deep wells were planned for the IBDP: • The injection well: Injection Well #1 (CCS1); • The monitoring well (both in-zone and above seal): Verification Well #1 (VW1); and • The geophone monitoring well: Geophysical Monitoring Well #1 (GM1). The detailed plans for these wells are attached to the appendices of this document. The wells were drilled successfully with little deviation from the original plans. The biggest change from the plan to execution was the need to adjust for larger-than-expected loss of circulation in the Potosi section of the Knox Formation. The completions reports also attached to this document detail the well constructions as they were actually built. Injectivity testing was carried out, and the perforating plans were adjusted based on the results. Additional perforations and acidizing were performed as a result of the injectivity testing. The testing plans are detailed in this report along with the actual testing results. The injectivity testing results were used in the modeling and simulation efforts. Detailed HSE plans were developed and implemented during the planning and execution phases of the project. The implementation included an HSE Bridging Document, which served to unify the HSE policies of the project partners and key subcontractors. The HSE plan and actual HSE results are presented in this document. There were no recordable HSE incidents during the project. A detailed logging program was developed based on project needs. The log data were acquired in accordance with the plan, and both the plan and log results are presented in this report. Log data were heavily utilized by the research staff, modelers, reservoir engineers, and for technical and permitting efforts. 5 Several key lessons were learned during the project: • Safety in operations and execution is paramount and is only achieved through proper planning and behavior control. The certainty of this was reinforced through implementation of this lesson and the resultant flawless HSE performance during the project. • Losses of drilling fluid circulation were larger than anticipated within the Potosi Formation. Circulation was only recovered through cementing the loss zones. • When possible, minimizing complexity in permit requirements and well designs is preferable. • The size of the wells were outside of the standard experience and expertise typical within the basin, and therefore required substantial planning and ramp-up of contractors and partners to meet project objectives. • With multiple stakeholders and research partners, establishing objectives and requirements early and adhering to change request procedures throughout the project are critical to manage competing data and sampling objectives that may be detrimental to overall progress. The well construction and completion operations were successfully executed, with all wells built in a manner that achieved excellent wellbore integrity. Log planning involved a number of stakeholders and technical specialists. Data collection from logging, coring, and testing was excellent. Time and effort spent with the associated contractors and suppliers to develop a well plan beyond normal scope proved highly successful, resulting in a well-construction and completion project that surpassed expectations. The world-class HSE results also demonstrate the commitment of all stakeholders in the project. The details follow in the body of this document

01 COAL, LIGNITE, AND PEAT↗

Clustered BSRs: Evidence for gas hydrate-bearing turbidite complexes in folded regions, example from the Perdido Fold Belt, northern Gulf of Mexico

We detail previously undocumented but extensive gas hydrate accumulations in the mouth of Perdido Canyon in the northern Gulf of Mexico. The accumulations are located within central parts of structural domes (four-way closures) and are characterized by stacked, high-amplitude bottom simulating reflections (BSRs) that we call clustered BSRs. Seismic data from Perdido Canyon show two clustered BSRs associated with turbidite sequences within two dome folds formed from tectonic folding and salt diapir rise. The northwestern (NW) and southeastern (SE) clustered BSRs have aerial extents of ~25 km2 and 50 km2, respectively. Well log data confirm gas hydrate occurs above the NW clustered BSR, within a 225 m-thick consistently high-resistivity interval that we interpret as gas hydrate in near-vertical fractures and turbidite sands. The SE dome is only drilled at the edge of the BSR; nevertheless, the well log data indicate that a 30 m-thick gas hydrate accumulation is present. Gas chromatographic logs in both domes suggest a gradual transition from predominantly microbial gas below the BSR (500–1000 m below seafloor (mbsf)) to thermogenic gas at 1000–2000 mbsf. Based on the well log data and seismic stratigraphic analysis, we find gas hydrate is concentrated in fractures in marine mud, as well as in the pores of submarine fan turbidities, where saturations reach as high as 75%. An estimate of the total gas hydrate-bound gas volume at standard temperature and pressure is between 0.04 and 0.17 trillion cubic meters (TCM) assuming average hydrate saturation of 5-20% in a ~45 m thick turbidite sand unit above the Perdido Canyon BSR area. Measured BSR extent and gas volume estimates indicate that the NW and SE reservoirs are among the largest gas hydrate occurrences known in the Gulf of Mexico.

58 GEOSCIENCES↗

Enabling event tracing at leadership-class scale through I/O forwarding middleware. In: HPDC '12 Proceedings of the 21st international symposium on High-Performance Parallel and Distributed Computing

Event tracing is an important tool for understanding the performance of parallel applications. As concurrency increases in leadership-class computing systems, the quantity of performance log data can overload the parallel file system, perturbing the application being observed. In this work we present a solution for event tracing at leadership scales. We enhance the I/O forwarding system software to aggregate and reorganize log data prior to writing to the storage system, significantly reducing the burden on the underlying file system for this type of traffic. Furthermore, we augment the I/O forwarding system with a write buffering capability to limit the impact of artificial perturbations from log data accesses on traced applications. To validate the approach, we modify the Vampir tracing toolset to take advantage of this new capability and show that the approach increases the maximum traced application size by a factor of 5x to more than 200,000 processes.

Ilsche, Thomas↗

Enabling Event Tracing at Leadership-Class Scale through I/O Forwarding Middleware

Event tracing is an important tool for understanding the performance of parallel applications. As concurrency increases in leadership-class computing systems, the quantity of performance log data can overload the parallel file system, perturbing the application being observed. In this work we present a solution for event tracing at leadership scales. We enhance the I/O forwarding system software to aggregate and reorganize log data prior to writing to the storage system, significantly reducing the burden on the underlying file system for this type of traffic. Furthermore, we augment the I/O forwarding system with a write buffering capability to limit the impact of artificial perturbations from log data accesses on traced applications. To validate the approach, we modify the Vampir tracing tool to take advantage of this new capability and show that the approach increases the maximum traced application size by a factor of 5x to more than 200,000 processors.

Ilsche, Thomas↗

The effect of reservoir heterogeneity on gas production from hydrate accumulations in the permafrost

The quantity of hydrocarbon gases trapped in natural hydrate accumulations is enormous, leading to significant interest in the evaluation of their potential as an energy source. Large volumes of gas can be readily produced at high rates for long times from methane hydrate accumulations in the permafrost by means of depressurization-induced dissociation combined with conventional technologies and horizontal or vertical well configurations. Initial studies on the possibility of natural gas production from permafrost hydrates assumed homogeneity in intrinsic reservoir properties and in the initial condition of the hydrate-bearing layers (either due to the coarseness of the model or due to simplifications in the definition of the system). These results showed great promise for gas recovery from Class 1, 2, and 3 systems in the permafrost. This work examines the consequences of inevitable heterogeneity in intrinsic properties, such as in the porosity of the hydrate-bearing formation, or heterogeneity in the initial state of hydrate saturation. Heterogeneous configurations are generated through multiple methods: (1) through defining heterogeneous layers via existing well-log data, (2) through randomized initialization of reservoir properties and initial conditions, and (3) through the use of geostatistical methods to create heterogeneous fields that extrapolate from the limited data available from cores and well-log data. These extrapolations use available information and established geophysical methods to capture a range of deposit properties and hydrate configurations. The results show that some forms of heterogeneity, such as horizontal stratification, can assist in production of hydrate-derived gas. However, more heterogeneous structures can lead to complex physical behavior within the deposit and near the wellbore that may obstruct the flow of fluids to the well, necessitating revised production strategies. The need for fine discretization is crucial in all cases to capture dynamic behavior during production.

54 ENVIRONMENTAL SCIENCES↗

Using Splunk® Enterprise Search Commands for Advanced Analysis of Ivanti Connect Secure© Logs

Analyzing the logs of even the smallest Information Technology (IT) system can be a challenge considering they can generate millions of lines of log data in a very short time. Splunk® Enterprise is an industry leading tool that allows analysis of log data, which can enhance troubleshooting capabilities, improve system performance, and improve the security posture of an IT system. Ivanti Connect Secure© (ICS) is a market-leading platform powered by the Ivanti Secure Socket Layer Virtual Private Network (SSL VPN) appliance, providing an architecture for secure access to and protection of network resources. This paper describes an approach for using Splunk Enterprise search capabilities to perform advanced data analysis of ICS logs.

97 MATHEMATICS AND COMPUTING↗

Recovery Act: High-Temperature Circuit Boards for use in Geothermal Well Monitoring Applications

The U.S. Department of Energy is leading the development of alternative energy sources that will ensure the long-term energy independence of our nation. One of the key renewable resources currently being advanced is geothermal energy. To tap into the large potential offered by generating power from the heat of the earth, and for geothermal energy to be more widely used, it will be necessary to drill deeper wells to reach the hot, dry rock located up to 10 km beneath the earth’s surface. In this instance, water will be introduced into the well to create a geothermal reservoir. A geothermal well produced in this manner is referred to as an enhanced geothermal system (EGS). EGS reservoirs are typically at depths of 3 to 10 km, and the temperatures at these depths have become a limiting factor in the application of existing downhole technologies. These high temperatures are especially problematic for electronic systems such as downhole data-logging tools, which are used to map and characterize the fractures and high-permeability regions in underground formations. Information provided by these tools is assessed so that underground formations capable of providing geothermal energy can be identified, and the subsequent drilling operations can be accurately directed to those locations. The mapping of geothermal resources involves the design and fabrication of sensor packages, including the electronic control modules, to quantify downhole conditions (300°C temperature, high pressure, seismic activity, etc.). Because of the extreme depths at which these measurements are performed, it is most desirable to perform the sensor signal processing downhole and then transmit the information to the surface. This approach necessitates the use of high-temperature electronics that can operate in the downhole environment. Downhole signal processing in EGS wells will require the development and demonstration of circuit boards that can withstand the elevated temperatures found at these depths. At present, the highest-temperature commercially available circuit boards are based on polyimide materials, and those have maximum use temperatures of 200 to 250°C. In addition to thermal stability, downhole electronics must also be fabricated into high-aspect-ratio packages. For example, the multilayer assemblies produced at SNL were approximately 2.5 cm wide and 50 cm long. Because of this very high form factor, glass-fiber-reinforced polymers are much more desirable than multilayer ceramic modules (MCM). MCMs have many advantages for some applications, but are susceptible to damage induced by the mechanical and vibrational loads commonly experienced by data-logging tools. Thus, as EGS technology continues to advance, there is a strong need for multilayer electronics that can provide the necessary thermal performance while also being compatible with high-form-factor circuit designs. This project involved the design and development of high-temperature circuit materials, as well as the fabrication and testing of circuit components. The material development included the evaluation of various polymer/fiberglass composites, whereas the circuit components were tested using conventional microelectronic evaluation techniques. This effort targeted development of a new class of high-temperature multilayer circuit boards for use in downhole data-logging applications where temperatures are on the order of 300°C. This is consistent with DOE’s multiyear plan for advancing technologies for use in enhanced geothermal systems. Organic and inorganic polymer systems, both with glass reinforcements, were considered to provide the following performance at elevated temperatures: • Mechanical strength and durability • High dielectric strength and electrical resistivity • Thermal stability • Strong adhesion to copper to ensure the reliability of the multilayer assemblies • Processing characteristics that are consistent with state-of-the-art multilayer circuit board manufacturing practices

15 GEOTHERMAL ENERGY↗

Midwest Consortium for Wind Turbine Reliability and Optimization

This report provides an overview of the efforts aimed to establish a student focused laboratory apparatus that will enhance Purdue's ability to recruit and train students in topics related to the dynamics, operations and economics of wind turbines. The project also aims to facilitate outreach to students at Purdue and in grades K-12 in the State of Indiana by sharing wind turbine operational data. For this project, a portable wind turbine test apparatus was developed and fabricated utilizing an AirX 400W wind energy converter. This turbine and test apparatus was outfitted with an array of sensors used to monitor wind speed, turbine rotor speed, power output and the tower structural dynamics. A major portion of this project included the development of a data logging program used to display real-time sensor data and the recording and creation of output files for data post-processing. The apparatus was tested in an open field to subject the turbine to typical operating conditions and the data acquisition system was adjusted to obtain desired functionality to facilitate use for student projects in existing courses offered at Purdue University and Indiana University. Data collected using the data logging program is analyzed and presented to demonstrate the usefulness of the test apparatus related to wind turbine dynamics and operations.

17 WIND ENERGY↗

Clickstream data yields high-resolution maps of science

Intricate maps of science have been created from citation data to visualize the structure of scientific activity. However, most scientific publications are now accessed online. Scholarly web portals record detailed log data at a scale that exceeds the number of all existing citations combined. Such log data is recorded immediately upon publication and keeps track of the sequences of user requests (clickstreams) that are issued by a variety of users across many different domains. Given these advantagees of log datasets over citation data, we investigate whether they can produce high-resolution, more current maps of science.

99 GENERAL AND MISCELLANEOUS↗