Search NASA⌕ Search

SEARCH · Search NASA

Results for “delta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Real-Time Lossless Compression for Ultra-High-Density Synchrophasor and Point on Wave Data

Modern advanced Phasor Measurement Units (PMUs) are developed with ultra-high reporting rates to meet the demand for monitoring the power systems dynamics in detail. Due to the large volume of data, the communication and storage systems are seriously challenged with the presence of Ultra-High-Density (UHD) synchrophasor and Point on Wave (POW) data. Therefore, it is an urgent task to compress the UHD data for more efficient communication and data storage. This paper proposes several methods to compress the synchrophasor and POW data in a lossless manner. First, an Improved-Time-Series-Special Compression (ITSSC) method is proposed to compress the UHD frequency data. Second, a Delta-difference Huffman method is combined with the TSSC algorithm to compress the UHD phase angle data. Finally, a cyclical high-order delta modulation method is proposed to compress the UHD POW data. The proposed models are extensively tested and compared with different existing lossless compression algorithms using the field-collected synchrophasor and POW data at different reporting rates. The results indicate that the proposed algorithms are efficient in performing lossless compression for the UHD synchrophasor and POW data in real time.

42 ENGINEERING↗

High hole concentration in p-type AlGaN by indium-surfactant-assisted Mg-delta doping

High hole concentration was achieved in Mg-doped Al{sub x}Ga{sub 1−x}N (x ∼ 0.4) by using indium-surfactant-assisted delta doping method. A maximum carrier concentration of 4.75 × 10{sup 18 }cm{sup −3} was obtained, which is three times higher than that of the conventionally delta-doped sample. Sheet resistivity as low as 2.46 × 10{sup 4} Ω/sq was realized, benefiting from the high hole concentration (p). Analysis results show that the Mg incorporation is effectively enhanced, while the compensation ratio and acceptor activation energy (E{sub A}) are significantly reduced by using In surfactant. It was also found that the In surfactant may induce stronger valence-band modulation, contributing to the decrease of E{sub A} and the increase of p.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct measurement of the anelasticity of a tungsten fiber

We report the first precision measurement of the frequency-dependent property of the effective torsion spring constant for a tungsten fiber by using two disk pendulums with different moments of inertia. A quartz fiber with Q{approx_equal}3.36x10{sup 5} was used to determine the ratio of the moments of inertia of two pendulums. The experimental result indicated that the torsion spring constant of the tungsten fiber was dependent on the oscillation frequency by {delta}K/{delta}({omega}{sup 2})=(0.954{+-}0.084)x10{sup -8} kgm{sup 2} at {approx}mHz range, which suggested that the resultant bias in our G measurement with the time-of-swing method was {delta}G/G=(211.80{+-}18.69) ppm as reported recently by Jun Luo et al.[Phys. Rev. Lett. 102, 240801 (2009)]. This experiment provided the first direct test to the Kuroda-Newman effect that predicted an upward bias in a G measurement with the time-of-swing method.

36 MATERIALS SCIENCE↗

DETECTING BARYON ACOUSTIC OSCILLATIONS

Baryon acoustic oscillations (BAOs) are a feature imprinted in the galaxy distribution by acoustic waves traveling in the plasma of the early universe. Their detection at the expected scale in large-scale structures strongly supports current cosmological models with a nearly linear evolution from redshift z Almost-Equal-To 1000 and the existence of dark energy. In addition, BAOs provide a standard ruler for studying cosmic expansion. In this paper, we focus on methods for BAO detection using the correlation function measurement {xi}-hat. For each method, we want to understand the tested hypothesis (the hypothesis H{sub 0} to be rejected) and the underlying assumptions. We first present wavelet methods which are mildly model-dependent and mostly sensitive to the BAO feature. Then we turn to fully model-dependent methods. We present the method used most often based on the {chi}{sup 2} statistic, but we find that it has limitations. In general the assumptions of the {chi}{sup 2} method are not verified, and it only gives a rough estimate of the significance. The estimate can become very wrong when considering more realistic hypotheses, where the covariance matrix of {xi}-hat depends on cosmological parameters. Instead, we propose to use the {Delta}l method based on two modifications: we modify the procedure for computing the significance and make it rigorous, and we modify the statistic to obtain better results in the case of varying covariance matrix. We verify with simulations that correct significances are different from the ones obtained using the classical {chi}{sup 2} procedure. We also test a simple example of varying covariance matrix. In this case we find that our modified statistic outperforms the classical {chi}{sup 2} statistic when both significances are correctly computed. Finally, we find that taking into account variations of the covariance matrix can change both BAO detection levels and cosmological parameter constraints.

79 ASTRONOMY AND ASTROPHYSICS↗

Monte Carlo electron-photon transport using GPUs as an accelerator: Results for a water-aluminum-water phantom

An electron-photon coupled Monte Carlo code ARCHER - Accelerated Radiation-transport Computations in Heterogeneous Environments - is being developed at Rensselaer Polytechnic Institute as a software test bed for emerging heterogeneous high performance computers that utilize accelerators such as GPUs. In this paper, the preliminary results of code development and testing are presented. The electron transport in media was modeled using the class-II condensed history method. The electron energy considered ranges from a few hundred keV to 30 MeV. Moller scattering and bremsstrahlung processes above a preset energy were explicitly modeled. Energy loss below that threshold was accounted for using the Continuously Slowing Down Approximation (CSDA). Photon transport was dealt with using the delta tracking method. Photoelectric effect, Compton scattering and pair production were modeled. Voxelised geometry was supported. A serial ARHCHER-CPU was first written in C++. The code was then ported to the GPU platform using CUDA C. The hardware involved a desktop PC with an Intel Xeon X5660 CPU and six NVIDIA Tesla M2090 GPUs. ARHCHER was tested for a case of 20 MeV electron beam incident perpendicularly on a water-aluminum-water phantom. The depth and lateral dose profiles were found to agree with results obtained from well tested MC codes. Using six GPU cards, 6x10{sup 6} histories of electrons were simulated within 2 seconds. In comparison, the same case running the EGSnrc and MCNPX codes required 1645 seconds and 9213 seconds, respectively, on a CPU with a single core used. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multigrid Reduction in Time for Chaotic and Hyperbolic Problems (Final Report)

The coming massive parallelism of exascale computing presents a pressing challenge for the many DOE simulations of time-dependent partial differential equations (PDEs), which typically use traditional sequential time stepping methods. Since this traditional approach is inherently serial, it presents a sequential bottleneck when moving to exascale computing, because future performance gains will come through greater concurrency, not faster clock speeds. Thus, the goal of this work is to research parallelism in time, i.e., methods that compute multiple time values simultaneously, not sequentially. The focus will be on hyperbolic and chaotic problems of interest to DOE, with the goal of enabling scalable simulations of time-dependent hyperbolic and chaotic problems on future architectures. The chosen methodology for solving these problems parallel-in-time is multigrid, because multigrid (when it works) is a powerful, optimal, and scalable solver for discretized PDEs. Multigrid is already commonly used in many DOE simulations for scalably and optimally solving space-only PDE problems. The areas of hyperbolic and chaotic problems are chosen because of their relevance to problems of programmatic interest to DOE. However, these problems are also well-known to be difficult for parallelin-time methods, with the most common method, parareal, diverging in many cases. The current state-of-the-art for parallel-in-time at LLNL is the multigrid reduction in time (MGRIT) XBraid package, which also struggles for such problems, while still showing some improvement over parareal. In summary, new methods are needed for an efficient parallel-in-time scheme for hyperbolic and chaotic problems, and this work shall research promising new multigrid methods in this area. In particular, this work shall continue researching the directions from the current collaboration with Dr. Falgout, which are laid out in the work Toward Parallel in Time for Chaotic Dynamical Systems and showed the first known results of a parallel-in-time speedup for a chaotic problem. This work outlines two key improvements to XBraid for chaotic problems, the so-called “theta” and “delta-correction” methods. Here, these two improvements will be implemented in a high-performance but general way in XBraid and explored for more complicated problems. We will additionally research, as time allows, improvements to these techniques, as well as multigrid relaxation techniques based on Least Squares Shadowing (LSS by Wang) and a nonintrusive block tridiagonal solver based on MGRIT, called TriMGRIT.

97 MATHEMATICS AND COMPUTING↗

Multigrid Reduction in Time for Chaotic and Hyperbolic Problems (Final Report)

The coming massive parallelism of exascale computing presents a pressing challenge for the many DOE simulations of time-dependent partial differential equations (PDEs), which typically use traditional sequential time stepping methods. Since this traditional approach is inherently serial, it presents a sequential bottleneck when moving to exascale computing, because future performance gains will come through greater concurrency, not faster clock speeds. Thus, the goal of this work is to research parallelism in time, i.e., methods that compute multiple time values simultaneously, not sequentially. The focus will be on hyperbolic and chaotic problems of interest to DOE, with the goal of enabling scalable simulations of time-dependent hyperbolic and chaotic problems on future architectures. The chosen methodology for solving these problems parallel-in-time is multigrid, because multigrid (when it works) is a powerful, optimal, and scalable solver for discretized PDEs. Multigrid is already commonly used in many DOE simulations for scalably and optimally solving space-only PDE problems. The areas of hyperbolic and chaotic problems are chosen because of their relevance to problems of programmatic interest to DOE. However, these problems are also well-known to be difficult for parallel-in-time methods, with the most common method, parareal, diverging in many cases. The current state of-the-art for parallel-in-time at LLNL is the multigrid reduction in time (MGRIT) XBraid package, which also struggles for such problems, while still showing some improvement over parareal. In summary, new methods are needed for an efficient parallel-in-time scheme for hyperbolic and chaotic problems, and this work shall research promising new multigrid methods in this area. In particular, this work shall continue researching the directions from the current collaboration with Dr. Falgout, which are laid out in the work Toward Parallel in Time for Chaotic Dynamical Systems and showed the first known results of a parallel-in-time speedup for a chaotic problem. This work outlines two key improvements to XBraid for chaotic problems, the so-called “theta” and “delta-correction” methods. Here, these two improvements will be further researched and improved (including with a new relaxation method inspired by on Least Squares Shadowing (LSS)) and explored for more complicated problems.

97 MATHEMATICS AND COMPUTING↗

Analysis of overlapping count data

Counts of a specific characteristic were obtained within regions defined on an object that was manufactured in a proprietary setting. The count regions were altered during production and resulted in misaligned or overlapping count data. A closed-formula maximum likelihood estimator (MLE) of the new region means is derived using all of the available count data and an independent Poisson model. The MLE is shown to be preferable to estimators constructed using generalized linear models for the overlapping data setting. This closed-form estimator extends to over-dispersed overlapping count data as the quasi-MLE and also performs well with correlated overlapping count data. Standard errors for the estimator are approximated and are validated with a simulation study. Additionally, the methods are extended to overlapping multinomial data. Illustrative examples of the methods are provided throughout the paper and are reproducible with the supplemental R code. Additionally, proofs of the paper’s results are also included in the supplemental material.

97 MATHEMATICS AND COMPUTING↗

A vortex-lattice method for calculating longitudinal dynamic stability derivatives of oscillating delta wings

A nonsteady vortex-lattice method is introduced for predicting the dynamic stability derivatives of a delta wing undergoing an oscillatory motion. The analysis is applied to several types of small oscillations in pitch. The angle of attack varied between + or - 1 deg, with the mean held at 0 deg when the flow was assumed to be attached and between + or - 1 deg and the mean held at 15 deg when both leading-edge separation and wake roll-up were included. The computed results for damping in pitch are compared with several other methods and with experiments, and are found to be consistent and in good agreement.

Levin, D.↗

Third Bose fugacity coefficient in one dimension, as a function of asymptotic quantities

In one of the very few exact quantum mechanical calculations of fugacity coefficients, [L.R. Dodd, A.M. Gibbs. J. Math. Phys. 15 (1974) 41] obtained b{sub 2} and b{sub 3} for a one dimensional Bose gas, subject to repulsive delta-function interactions, by direct integration of the wave functions. For b{sub 2}, we have shown [A. Amaya-Tapia, S.Y. Larsen, M. Lassaut. Mol. Phys. 103 (2005) 1301-1306. < (arXiv:physics/0405150)>] that Dodd and Gibbs' result can be obtained from a phase shift formalism, if one also includes the contribution of oscillating terms, usually contributing only in one dimension. Now, we develop an exact expression for b{sub 3}-b{sub 3}{sup 0} (where b{sub 3}{sup 0} is the free particle fugacity coefficient) in terms of sums and differences of three-body eigenphase shifts. Further, we show that if we obtain these eigenphase shifts in a Distorted-Born approximation, then, to first order, we reproduce the leading low temperature behaviour, obtained from an expansion of the twofold integral of Dodd and Gibbs. The contributions of the oscillating terms cancel. The formalism that we propose is not limited to one dimension, but seeks to provide a general method to obtain virial coefficients, fugacity coefficients, in terms of asymptotic quantities. The exact one dimensional results allow us to confirm the validity of our approach in this domain.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Specimen Size Effect on the Fatigue Crack Growth Rate Threshold of IN 718

Fatigue crack growth rate (FCGR) tests were conducted on IN 718 in the solution annealed and aged condition at room temperature in accordance with E647-87. As part of each test, the FCGR threshold was measured using the decreasing Delta K method. A new heat of material was being tested and some of this material was sent to a different laboratory which wanted to use a specimen with a 127 mm width. Threshold data previously had been established on specimens with a width of 50.8 mm. As a check of the laboratory, tests were conducted at room temperature and R equal to 0.1 for comparison with the earlier data. The results were a threshold significantly higher than previously observed. Interchanging of specimen sizes and laboratories showed that the results were not due to a heat-to-heat or lab-to-lab variation. The results to be presented here are those obtained at the original laboratory. Growth rates were measured using the electric potential drop technique at R values of 0.1, 0.7, and 0.9. Compact tension specimen sizes with planer dimensions of 25.4 mm, 50.8 mm, and 127 mm were used. Crack growth rates at threshold were generally below 2.5 X 10(exp -8) mm / cycle. Closure measurements were made on some of the specimens by a manual procedure using a clip gage. When the crack growth rate data for the specimens tested at R equal to 0.1 were plotted as a function of applied Delta K, the thresholds varied with specimen width. The larger the width, the higher the threshold. The thresholds varied from 6.5 MPa-m(exp 1/2) for the 25.4 mm specimen to 15.4 MPa-m(exp 1/2) for the 127 mm specimen. At R equal to 0.7, the 25.4 mm and 50.8 mm specimens had essentially the same threshold, about 2.9 MPa-m(exp 1/2)while the 127 mm specimen had a threshold of 4.5 MPa-m(exp 1/2). When plotted as a function of effective Delta K, the R equal to 0.1 data are essentially normalized. Various aspects of the test procedure will be discussed as well as the results of analysis of the data using some different closure models.

Garr, K. R.↗

Oral prenylation inhibition with lonafarnib in chronic hepatitis D infection: a proof-of-concept randomised, double-blind, placebo-controlled phase 2A trial

Background: Therapies for chronic hepatitis delta virus (HDV) infection are unsatisfactory. Prenylation is essential for HDV and inhibition abrogates HDV production in experimental models. Here, in a proof-of-concept study, we aimed to assess the effect on HDV RNA levels, safety, and tolerability of the prenylation inhibitor lonafarnib in patients with chronic delta hepatitis. Methods: In this phase 2A double-blind, randomised, placebo-controlled study, patients aged 18 years or older with chronic HDV infection were randomly assigned (3:1 in group 1 and 2:1 in group 2) to receive lonafarnib 100 mg (group 1) or lonafarnib 200 mg (group 2) twice daily for 28 days with 6 months' follow-up. Participants were randomised by random-number tables blocked in groups of four without stratification. Both groups enrolled six treatment participants and two placebo participants. Group 1 placebo patients received open-label lonafarnib as group 2 participants. The primary therapeutic endpoint was a decrease in HDV RNA viral titre in serum and the primary safety endpoint was the ability to tolerate the drug at the prescribed dose for the full 4-week duration, defined as drug discontinuation due to intolerance or grade 3/4 adverse events. This trial is registered with ClinicalTrials.gov, number NCT01495585. Findings: Between Jan 19, 2012, and April 28, 2014, 14 patients were enrolled, of whom eight were assigned to group 1 and six were assigned to group 2. At day 28, compared with placebo, mean log HDV RNA declines from baseline were -0·73 log IU/mL in group 1 (95% CI 0·17–1·31; p=0·03) and -1·54 log IU/mL in group 2 (1·21–1·93; p<0·0001). Lonafarnib serum concentrations correlated with HDV RNA change (r 2 =0·78, p<0·0001). Model fits show that hepatitis B surface antigen (HBsAg) remained stable after a short pharmacological delay (0·75 days [SE 0·24]), lonafarnib effectiveness in blocking HDV production was greater in group 2 than in group 1 (0·952 [SE 0·06] vs 0·739 [0·05], p<0·001), and the HDV half-life was 1·62 days (0·07). There was no evidence of virological resistance. Adverse events were mainly mild to moderate with group 1 patients experiencing diarrhoea in three patients (50%) and nausea in two patients (33%) and in group 2 with all patients (100%) experiencing nausea, diarrhoea, abdominal bloating, and weight loss greater than 2 kg (mean of 4 kg). No treatment discontinuations occurred in any treatment groups. Interpretation: Treatment of chronic HDV with lonafarnib significantly reduces virus levels. The decline in virus levels significantly correlated with serum drug levels, providing further evidence for the efficacy of prenylation inhibition in chronic HDV.

59 BASIC BIOLOGICAL SCIENCES↗

Excited States of Light-Harvesting Systems Based on Fullerene/Graphene Oxide and Porphyrin/Smaragdyrin

In this work, we present a theoretical study at the density functional theory (DFT) level and time-dependent DFT of the ground and singlet excited states of electron donor–acceptor complexes formed by porphyrin (TPP)/smaragdyrin (TPOS) (expanded porphyrin), as light-harvesting systems, and fullerene (C 60 )/graphene oxide (GO), as acceptor nanocarbon structure. We investigate the effect of the nanocarbon on UV–vis electronic absorption of porphyrin/smaragdyrin, using the functionals B3LYP, PBE, M06, and wB97XD. The results showed the lowest deviation of the Q-band for the functional M06 (0.01–0.02 eV). Electronic absorption spectra calculated for the complexes with M06 predict that (a) graphene oxide increases the intensity of the Soret band, (b) fullerene produces a red-shift of the Q bands (4 nm) with respect to graphene oxide, and (c) smaragdyrin causes a red-shift of Q (27–48 nm) and Soret (37 nm) absorption bands as compared to porphyrin. We also investigate the effect of the nanocarbon structure on the charge-transfer (CT) excited states. Using the perturbative delta-SCF method with the PBE functional, we found that the charge-transfer excitation energy increases as TPOS-C 60 (2.53 eV) < TPP-GO (2.89 eV) < TPP-C 60 (3.01 eV) < TPOS-GO (3.28 eV). The presence of a nanocarbon structure affects more strongly smaragdyrin (~0.8 eV) than porphyrin (~0.1 eV). We show that the binding between smaragdyrin and fullerene C 60 favors the charge separation states with a lower energy cost, which means that these systems present an advantage for its application in photovoltaic cells.

36 MATERIALS SCIENCE↗

A DFT analysis of the ground and charge-transfer excited states of Sc 3 N@I h –C 80 fullerene coupled with metal-free and zinc-phthalocyanine

Endohedral metallofullerenes and phthalocyanine derivatives are recognized as excellent active materials in organic photovoltaics (OPVs). The tri-metallic nitride endohedral C 80 fullerenes have greater absorption coefficients in the visible region and electron-accepting abilities similar to C 60 , which can allow for higher efficiencies in OPV devices. Here, we have investigated the ground and charge transfer excited states of two co-facial donor–acceptor (D–A) molecular conjugates formed by the non-covalent coupling of trimetallic nitride endohedral fullerene (Sc 3 N@I h –C 80 ) with metal-free (H 2 Pc) and zinc-phthalocyanine (ZnPc) chromophores using DFT calculations. The charge transfer (CT) excitation energies are calculated using the perturbative delta-SCF method that enforces orthogonality between the ground and excited states. The binding energies calculated using the PBE and DFT-D3 methods indicate that the dispersion effects play an important role in the stabilization of these complexes. The ground state dipole moment of the Sc 3 N@C 80 –H 2 Pc dyad is much larger than that of Sc 3 N@C 80 –ZnPc, but this is reversed in the excited state where the dipole moment of Sc 3 N@C 80 –ZnPc increases significantly. The lowest few excitation energies in the gas phase for the two complexes are very close, in the range of 1.51–2.66 eV for Sc 3 N@C 80 –ZnPc and 1.51–2.71 eV for the Sc 3 N@C 80 –H 2 Pc complex. However, the lower ionization potential and lower exciton binding energy make the Sc 3 N@C 80 –ZnPc dyad a better candidate for OPVs as compared to the Sc 3 N@C 80 –H 2 Pc dyad.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetic Effects on Resistive Wall Mode Stability

Two approaches for studying the damping of resistive wall modes due to wave particle resonant interactions are discussed. One approach uses the eigenfunction from an ideal MHD code combined with the resonant particle damping calculated from a drift-kinetic {delta}f- method formulation. This perturbative approach treats the wave-particle interaction precisely, but does not include the back-effect of the kinetic terms on the eigenfunction structure. In the alternate non-perturbative approach the kinetic terms are included in an MHD description via the pressure tensor. This non-perturbative approach includes the resonances due to the bounce and precessional drifts subject to certain approximations. Comparisons between the two approaches and conclusions on the dominant stabilizing mechanisms are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High performance flexible top-emitting warm-white organic light-emitting devices and chromaticity shift mechanism

Flexible warm-white top-emitting organic light-emitting devices (TEOLEDs) are fabricated onto PET substrates with a simple semi-transparent cathode Sm/Ag and two-color phosphors respectively doped into a single host material TCTA. By adjusting the relative position of the orange-red EML sandwiched between the blue emitting layers, the optimized device exhibits the highest power/current efficiency of 8.07 lm/W and near 13 cd/A, with a correlated color temperature (CCT) of 4105 K and a color rendering index (CRI) of 70. In addition, a moderate chromaticity variation of (-0.025, +0.008) around warm white illumination coordinates (0.45, 0.44) is obtained over a large luminance range of 1000 to 10000 cd/m{sup 2}. The emission mechanism is discussed via delta-doping method and single-carrier device, which is summarized that the carrier trapping, the exciton quenching, the mobility change and the recombination zone alteration are negative to color stability while the energy transfer process and the blue/red/blue sandwiched structure are contributed to the color stability in our flexible white TEOLEDs.

36 MATERIALS SCIENCE↗

Demonstration of solar-blind Al{sub x}Ga{sub 1−x}N-based heterojunction phototransistors

Al{sub 0.4}Ga{sub 0.6}N/Al{sub 0.65}Ga{sub 0.35}N heterojunction phototransistors have been fabricated from the epi-structure grown by low-pressure metal organic chemical vapor deposition on c-plane sapphire substrates. P-type conductivity of the AlGaN base layer was realized by using indium surfactant-assisted Mg-delta doping method. Regrowth technique was used to suppress the Mg memory effect on the n-type emitter. The fabricated devices with a 150-μm-diameter active area exhibited a bandpass spectral response between 235 and 285 nm. Dark current was measured to be less than 10 pA for bias voltages below 2.0 V. A high optical gain of 1.9 × 10{sup 3} was obtained at 6 V bias.

36 MATERIALS SCIENCE↗

Results of the first implementation of RF phase signature matching at LANSCE

The LINAC at the Los Alamos Neutron Science Center (LANSCE) has been utilizing the Delta-t method to match the RF cavities to the design acceleration parameters since its commissioning in 1972. The differences in time-of-flight between two subsequent Beam Position and Phase Monitors (BPPMs) are measured with both accelerated and drifting beams, depending on the whether the module is set to on or off. The algorithm optimizes the module amplitude and phase via iterative measurements if the initial phase is in the vicinity of the design value. With an upgrade to a faster readout system, a scan over the whole RF cavity phase range requires relatively less time than the classical optimization procedure. The Phase Scan Signature Matching (PSSM) method provides a time-efficient method that ensures the phase selection lands on the bunching side and empowers future analyses to build module-specific models. The PSSM also utilizes a direct model to determine the correct amplitude to sub-percent level instead of using linearized matrices. Furthermore, lacking a reliable energy measurement method in the LINAC, we measure the beam phases at two downstream locations to increase the precision of energy measurements. In this letter, we also discuss the sensitivities of PSSM, error propagation, and the implementation results for the 2019 and 2020 beam cycles.

47 OTHER INSTRUMENTATION↗