Search NASA⌕ Search

SEARCH · Search NASA

Results for “depth sectioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Initial Validation and Results of Geoscience Laser Altimeter System Optical Properties Retrievals

Verification of Geoscience Laser Altimeter System (GLAS) optical retrievals is . problematic in that passage over ground sites is both instantaneous and sparse plus space-borne passive sensors such as MODIS are too frequently out of sync with the GLAS position. In October 2003, the GLAS Validation Experiment was executed from NASA Dryden Research Center, California to greatly increase validation possibilities. The high-altitude NASA ER-2 aircraft and onboard instrumentation of Cloud Physics Lidar (CPL), MODIS Airborne Simulator (MAS), and/or MODIS/ASTER Airborne Simulator (MASTER) under-flew seven orbit tracks of GLAS for cirrus, smoke, and urban pollution optical properties inter-comparisons. These highly calibrated suite of instruments are the best data set yet to validate GLAS atmospheric parameters. In this presentation, we will focus on the inter-comparison with GLAS and CPL and draw preliminary conclusions about the accuracies of the GLAS 532nm retrievals of optical depth, extinction, backscatter cross section, and calculated extinction-to-backscatter ratio. Comparisons to an AERONET/MPL ground-based site at Monterey, California will be attempted. Examples of GLAS operational optical data products will be shown.

Hlavka, Dennis L.↗
NASA NTRS2001

Latchup in CMOS analog-to-digital converters

Heavy-ion latchup is investigated for analog-to-digital converters. Differences in cross section for various ions shows that charge is collected at depths beyond 50 um, causing the cross section to be underestimated unless long-range ions are used. Current distributions and thermal imaging were used to identify latchup-sensitive regions. Latchup in one of the circuittypes was catastrophic, even when the power was turned off within 10 ms of a latchup event.

latchup space radiation CMOS analog-to-digital con↗
NASA NTRS2018

Comet Hitchhiker: NIAC Phase 1 Final Report

Summary of Activities-Developed the Comet Hitchhiker concept, which is to hitch rides on small bodies (asteroids and comets) using a tethered spacecraft. (Section 2)-Identified five scientifically important missions that would be enabled or significantly benefited by the Comet Hitchhiker concept.The five mission concepts are: KBO rendezvous, Centaur rendezvous, Trojan rendezvous, Damocloid rendezvous, and Main asteroid belt tour to rendezvous with multiple (10) objects. (Section 3)-Derived the Space Hitchhike Equation, or "the rocket equation for hitchhiker", which relates the specific strength of tether, mass ratio, and V. (Section 4.1)-Performed in-depth feasibility analysis of the critical components of the concept through: Finite-element simulations of tether and spacecraft dynamics, as shown in Figure 1 (Section 4.4); Supercomputer simulations of the hypervelocity impact of harpoon on a small body, as shown in Figure 2. (Section 6)-Performed public outreach activities including the collaboration with a concept artist of the Museum of Science Fiction, exposure to media, and public presentations. (Section 8)

Deep Space↗
NASA NTRS2008

Ultrafast Phase Mapping of Thin-Sections from An Apollo 16 Drive Tube - a New Visualisation of Lunar Regolith

Polished thin-sections of samples extracted from Apollo drive tubes provide unique insights into the structure of the Moon's regolith at various landing sites. In particular, they allow the mineralogy and texture of the regolith to be studied as a function of depth. Much has been written about such thin-sections based on optical, SEM and EPMA studies, in terms of their essential petrographic features, but there has been little attempt to quantify these aspects from a spatial perspective. In this study, we report the findings of experimental analysis of two thin-sections (64002, 6019, depth range 5.0 - 8.0 cm & 64001, 6031, depth range 50.0 - 53.1 cm), from a single Apollo 16 drive tube using QEMSCAN . A key feature of the method is phase identification by ultrafast energy dispersive x-ray mapping on a pixel-by-pixel basis. By selecting pixel resolutions ranging from 1 - 5 microns, typically 8,500,000 individual measurement points can be collected on a thin-section. The results we present include false colour digital images of both thin-sections. From these images, information such as phase proportions (major, minor and trace phases), particle textures, packing densities, and particle geometries, has been quantified. Parameters such as porosity and average phase density, which are of geomechanical interest, can also be calculated automatically. This study is part of an on-going investigation into spatial variation of lunar regolith and NASA's ISRU Lunar Simulant Development Project.

Botha, Pieter↗
NASA NTRS2007

Performance of the Lidar Design and Data Algorithms for the GLAS Global Cloud and Aerosol Measurements

The Geoscience Laser Altimeter System (GLAS) launched in early 2003 is the first polar orbiting satellite lidar. The instrument design includes high performance observations of the distribution and optical scattering cross sections of atmospheric clouds and aerosol. The backscatter lidar operates at two wavelengths, 532 and 1064 nm. For the atmospheric cloud and aerosol measurements, the 532 nm channel was designed for ultra high efficiency with solid state photon counting detectors and etalon filtering. Data processing algorithms were developed to calibrate and normalize the signals and produce global scale data products of the height distribution of cloud and aerosol layers and their optical depths and particulate scattering cross sections up to the limit of optical attenuation. The paper will concentrate on the effectiveness and limitations of the lidar channel design and data product algorithms. Both atmospheric receiver channels meet and exceed their design goals. Geiger Mode Avalanche Photodiode modules are used for the 532 nm signal. The operational experience is that some signal artifacts and non-linearity require correction in data processing. As with all photon counting detectors, a pulse-pile-up calibration is an important aspect of the measurement. Additional signal corrections were found to be necessary relating to correction of a saturation signal-run-on effect and also for daytime data, a small range dependent variation in the responsivity. It was possible to correct for these signal errors in data processing and achieve the requirement to accurately profile aerosol and cloud cross section down to 10-7 llm-sr. The analysis procedure employs a precise calibration against molecular scattering in the mid-stratosphere. The 1064 nm channel detection employs a high-speed analog APD for surface and atmospheric measurements where the detection sensitivity is limited by detector noise and is over an order of magnitude less than at 532 nm. A unique feature of the GLAS is a full acquisition of the surface return pulse, which has important application to the atmospheric transmission retrieval.

Spinhirne, James D.↗
NASA NTRS2002

Cloud Algorithm Design and Performance for the 2002 Geoscience Laser Altimeter System Mission

A satellite borne lidar instrument, the Geoscience Laser Altimeter System (GLAS), is to be launched in late 2002 and will provide continuous profiling of atmospheric clouds and aerosol on a global basis. Data processing algorithms have been developed to provide operational data products in near real time. Basic data products for cloud observations are the height of the top and bottom of single to multiple cloud layers and the lidar calibrated observed backscatter cross section up to the level of signal attenuation. In addition the optical depth and vertical profile of visible extinction cross section of many transmissive cloud layers and most haze layers are to be derived. The optical thickness is derivable in some cases from the attenuation of the molecular scattering below cloud base. In other cases an assumption of the scattering phase function is required. In both cases a estimated correction for multiple scattering is required. The data processing algorithms have been tested in part from aircraft measurements used to simulated satellite data. The GLAS lidar observations will be made from an orbit that will allow inter comparison with all other existing satellite cloud measurements.

Spinhirne, J. D.↗
NASA NTRS1982

Correction of lunar seismograms for instrumental and near-surface effects and constraints on the velocity structure of the lunar interior

Long-period lunar seismograms were studied with the aim of identifying consistent sets of direct shear and secondary wave arrivals, thus constraining the velocities in the lunar mantle and the depths of the velocity discontinuities. Two velocity models were used to locate the natural impacts and the shallow moonquakes and to obtain the travel time residuals. Seismic sections were made of the radial, transverse, and vertical components of ground motion for impacts, shallow, and deep moonquakes in order to search for consistent sets of secondary wave arrivals. No conclusive set of secondary arrivals could be recognized on the seismic sections and thus the velocities and depths of the velocity discontinuities cannot be severely constrained by secondary arrivals. It is likely that the crust is thinner than 50 km and that a first-order discontinuity separates the upper and lower crust at a depth of between 20 and 30 km.

Horvath, P.↗
NASA NTRS1982

Photometry and polarimetry of Titan - Pioneer 11 observations and their implications for aerosol properties

Pioneer 11 measurements of Titan's limb darkening and polarization at red and blue wavelengths are refined, and the integrated disk brightness measurements at phase angles from 22 to 96 deg, over which Titan's phase coefficient averages about 0.014 magnitudes/deg in both colors, are reduced. Comparisons of the data with vertically homogeneous multiple scattering models indicate that the single-scattering phase functions of the aerosols in both colors are flat at scattering angles between 80 and 150 deg, with a small peak at larger scattering angles. Although a vertically homogeneous model in which particles are assumed to scatter as spheres cannot simultaneously match the polarization observations of both colors for any refractive index, observed polarizations are most sensitive to the particle properties near optical depth 1/2 in each color. Models based on single scattering by spheres can therefore be successful over a range of refractive indices, if the size of the particles increases with depth and if the cross section of the particles increases sufficiently rapidly with decreasing wavelength.

Tomasko, M. G.↗
NASA NTRS2002

MAC/GMC 4.0 User's Manual: Keywords Manual

This document is the second volume in the three volume set of User's Manuals for the Micromechanics Analysis Code with Generalized Method of Cells Version 4.0 (MAC/GMC 4.0). Volume 1 is the Theory Manual, this document is the Keywords Manual, and Volume 3 is the Example Problem Manual. MAC/GMC 4.0 is a composite material and laminate analysis software program developed at the NASA Glenn Research Center. It is based on the generalized method of cells (GMC) micromechanics theory, which provides access to the local stress and strain fields in the composite material. This access grants GMC the ability to accommodate arbitrary local models for inelastic material behavior and various types of damage and failure analysis. MAC/GMC 4.0 has been built around GMC to provide the theory with a user-friendly framework, along with a library of local inelastic, damage, and failure models. Further, applications of simulated thermo-mechanical loading, generation of output results, and selection of architectures to represent the composite material have been automated in MAC/GMC 4.0. Finally, classical lamination theory has been implemented within MAC/GMC 4.0 wherein GMC is used to model the composite material response of each ply. Consequently, the full range of GMC composite material capabilities is available for analysis of arbitrary laminate configurations as well. This volume describes the basic information required to use the MAC/GMC 4.0 software, including a 'Getting Started' section, and an in-depth description of each of the 22 keywords used in the input file to control the execution of the code.

Bednarcyk, Brett A.↗
NASA NTRS1976

Ferromagnetic resonance and magnetic studies of cores 60009/60010 and 60003 - Compositional and surface-exposure stratigraphy

Ferromagnetic resonance and static magnetic measurements were made on 131 samples from core 60009/60010 and on 40 samples from section 60003 of the Apollo 16 deep drill core. These studies provided depth profiles for composition, in terms of the concentration of FeO, and relative surface exposure age (or maturity), in terms of the values of the specific FMR intensity normalized to the FeO content. For core 60009/60010, the concentration of FeO ranged from about 1.6 wt.% to 5.8 wt.% with a mean value of 4.6 wt.% and the maturity ranged from immature to mature with most of the soils being submature. A systematic decrease in maturity from the lunar surface to a depth of about 12.5 cm was observed in core section 60010. For core section 60003, the concentration of FeO ranged from about 5.2 wt.% to 7.5 wt.% with a mean value of 6.4 wt.% and the maturity ranged from submature to mature with most of the soils being mature.

Morris, R. V.↗
NASA NTRS1982

Effective photodissociation cross sections for molecular oxygen and nitric oxide in the Schumann-Runge bands

Accurate calculations of the atmospheric opacity and the photodissociation rate of molecular oxygen in the Schumann-Runge bands (175-205) are necessary for modeling chemistry in the terrestrial upper atmosphere. The present investigation is concerned with a single simple parameterization of effective cross sections which can be used to calculate both O2 opacity and dissociation rates. Use is made of a zenith angle dependent factor which accounts for variations shown in detailed calculations. The conducted analysis is based on the results of Frederick and Hudson (1980). Attention is given to molecular oxygen effective cross sections and nitric oxide effective cross sections. It is found that the depth of the atmosphere to which solar radiation in the 175-200 nm spectral region penetrates is a sensitive function of the rotational line widths in the Schumann-Runge bands. The oscillator strength for each band measures the cross section integrated over the band while the line width determine how the absorption is distributed in wavenumber.

Allen, M.↗
NASA NTRS1992

Automation of closed environments in space for human comfort and safety

This report culminates the work accomplished during a three year design project on the automation of an Environmental Control and Life Support System (ECLSS) suitable for space travel and colonization. The system would provide a comfortable living environment in space that is fully functional with limited human supervision. A completely automated ECLSS would increase astronaut productivity while contributing to their safety and comfort. The first section of this report, section 1.0, briefly explains the project, its goals, and the scheduling used by the team in meeting these goals. Section 2.0 presents an in-depth look at each of the component subsystems. Each subsection describes the mathematical modeling and computer simulation used to represent that portion of the system. The individual models have been integrated into a complete computer simulation of the CO2 removal process. In section 3.0, the two simulation control schemes are described. The classical control approach uses traditional methods to control the mechanical equipment. The expert control system uses fuzzy logic and artificial intelligence to control the system. By integrating the two control systems with the mathematical computer simulation, the effectiveness of the two schemes can be compared. The results are then used as proof of concept in considering new control schemes for the entire ECLSS. Section 4.0 covers the results and trends observed when the model was subjected to different test situations. These results provide insight into the operating procedures of the model and the different control schemes. The appendix, section 5.0, contains summaries of lectures presented during the past year, homework assignments, and the completed source code used for the computer simulation and control system.

Source record↗
NASA NTRS1984

Analysis of upper mantle structure using wave field continuation of P waves

Wave field continuation theory, which allows transformation of the seismic record section data directly into velocity-depth space, is tested for upper mantle analysis using a large array-recorded data set obtained at the 200-station Caltech-USGS Southern California Seismic Network that is representative of the structure beneath the gulf of California. The method's resolution capability is illustrated by the comparison of the slant stacks and downward continuation of both synthetic and data record sections. It is stressed that when high-quality, densely sampled digital data are available, the technique is easy to implement, provides an inversion which contains all the data in the global format, and produces an objective estimate of depth resolution as a function of ray parameter.

Walck, M. C.↗
NASA NTRS1985

Proton-air and proton-proton cross sections from air shower data

Data on the fluctuations in depth of maximum development of cosmic ray air showers, corrected for the effects of mixed primary composition and shower development fluctuations, yield values of the inelastic proton-air cross section for laboratory energies in the range 10 to the 8th power to 10 to the 10th power GeV. From these values of proton-air cross section, corresponding values of the proton-proton total cross section are derived by means of Glauber theory and geometrical scaling. The resulting values of proton-proton cross section are inconsistent with a well known 1n(2)s extrapolation of ISR data which is consistent with SPS data; they indicate a less rapid rate of increase in the interval 540 sq root of s 100000 GeV.

Linsley, J.↗
NASA NTRS1986

Production of radionuclides in artificial meteorites irradiated isotropically with 600 MeV protons

The understanding of the production of cosmogenic nuclides in small meteorites (R is less than 40 cm) still is not satisfactory. The existing models for the calculation of depth dependent production rates do not distinguish between the different types of nucleons reacting in a meteorite. They rather use general depth dependent particle fluxes to which cross sections have to be adjusted to fit the measured radionuclide concentrations. Some of these models can not even be extended to zero meteorite sizes without logical contradictions. Therefore, a series of three thick target irradiations was started at the 600 MeV proton beam of the CERN isochronuous cyclotron in order to study the interactions of small stony meteorites with galactic protons. The homogeneous 4 pi irradiation technique used provides a realistic meteorite model which allows a direct comparison of the measured depth profiles with those in real meteorites. Moreover, by the simultaneous measurement of thin target production cross sections one can differentiate between the contributions of primary and secondary nucleons over the entire volume of the artificial meteorite.

Michel, R.↗
NASA NTRS1971

Random excitation of a panel-cavity system

An experimental investigation of the influence of random external sound field on cavity pressure and panel vibration is presented. The panel used was 10 in. x 20 in. x 0.05 in. aluminum alloy plate that was bonded onto a rectangular frame consisting of aluminum channel members welded together at their ends. By bonding the plate to the cavity in this way, a clamped edge boundary condition was approximated. A sealed cavity was constructed beneath the panel in such a way that the cavity depth could be varied in 2 in. increments from 12 in. to 2 in. deep. In order to vary the cavity depth, the cavity was built in sections. Each 2 in. section of the cavity was bolted to the other sections with rubber gaskets between them. The panel was excited acoustically by a Wolverine LS15, 20 watt loudspeaker driven by a B and K random noise generator, Type 1402. The external sound field was measured on the panel surface, using the 6 percent bandwidth of the frequency analyzer.

Gorman, G. F., III↗
NASA NTRS1972

Radioactivities in returned lunar materials.

The difference between the Ar-37 activities from similar locations in the rocks 12002 and 15555 provides direct measures of the Ar-37 activities produced by the 2 November 1969 flare. Differences between the Ar-37 activities in 14321 and 15555 give Ar-37 activities produced by the 24 January 1971 flare. The intensities of the two flares were determined by making use of measured Ar-37 cross sections in simulated lunar material. The depth dependence of tritium in samples and its temperature-release pattern provides information about the sources of the tritium and about the intensity of solar flares integrated over the past 30 years.

Fireman, E. L.↗
NASA NTRS1990

Computing Scattering Matrices For Circular Waveguides

Scattering Matrix Program for Circular Waveguide Junctions computes scattering matrix for series of circular waveguide sections. Sections must have same axis, but radius and length of each section completely arbitrary. Devices analyzed include simple waveguide step discontinuity like that used in a dual-mode horn, stepped matching section, or corrugated waveguide section with constant or varying slot depth. Certain types of corrugated horns also analyzed with program. Mathematical model used in program accurately predicts reflection and transmission characteristics of such devices, taking into account excitation of modes of higher order as well as multiple reflections and energy stored at each discontinuity. Written in FORTRAN 77.

Hoppe, Daniel J.↗