SEARCH · Search NASA

Results for “detachment control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Shock tube study of ionization rates of NaCl-contaminated argon

Spectrally resolved radiometry and a microwave technique were used to measure the electron density, electron temperature, and concentration, and the concentration of sodium atoms in the weakly ionized region behind a shock wave in an argon shock tube. It is shown that the observed increase in the ionization rate is due to electron detachment of negative chlorine ions produced from sodium chloride vapor contained as an impurity in the argon gas. The observed behavior of the electron temperature in time and the reactions controlled by the electron temperature are analyzed in the light of the impurity reaction scheme.

Scheneider, C.-P.↗

NASA NTRS1979

A detached experiment carrier aids adaptation of experiments from sounding rockets to Space Shuttle

The detached experiment carrier (DEC) system aids the adaptation of small, low-weight experiments to Space Shuttle missions. The carrier system consists of the detached experiment carrier (free-flyer), a command station at the Orbiter aft station, and a flight support station in the Orbiter payload bay. The carrier is a compact vehicle that is radio controlled by the Shuttle crew. It uses control television, command, and cold gas propulsion systems to deploy experiments from and later rendezvous with the Orbiter. The carrier propulsion system also maintains the attitude control required during experiment execution. Results of engineering investigation, analysis, component design and development, and testing indicate that the DEC system concept is practical. Results of preliminary engineering investigations, including maneuvering system handling qualities and television/telemetry display formats, indicate that the concept of flying the DEC 'out of' and 'into' the Orbiter payload bay is both safe and practical for small, compact free-flyer deployment and retrieval. This paper describes the carrier system, its operations, and potential applications.

Ritz, W. F.↗

NASA NTRS2009

Direct Adaptive Rejection of Vortex-Induced Disturbances for a Powered SPAR Platform

The Rapidly Deployable Stable Platform (RDSP) is a novel vessel designed to be a reconfigurable, stable at-sea platform. It consists of a detachable catamaran and spar, performing missions with the spar extending vertically below the catamaran and hoisting it completely out of the water. Multiple thrusters located along the spar allow it to be actively controlled in this configuration. A controller is presented in this work that uses an adaptive feedback algorithm in conjunction with Direct Adaptive Disturbance Rejection (DADR) to mitigate persistent, vortex-induced disturbances. Given the frequency of a disturbance, the nominal DADR scheme adaptively compensates for its unknown amplitude and phase. This algorithm is extended to adapt to a disturbance frequency that is only coarsely known by including a Phase Locked Loop (PLL). The PLL improves the frequency estimate on-line, allowing the modified controller to reduce vortex-induced motions by more than 95% using achievable thrust inputs.

VanZwieten, Tannen S.↗

NASA NTRS2009

Altair Lander Life Support: Design Analysis Cycles 1, 2, and 3

NASA is working to develop a new lunar lander to support lunar exploration. The development process that the Altair project is using for this vehicle is unlike most others. In Lander Design Analysis Cycle 1 (LDAC-1), a single-string, minimum functionality design concept was developed, including life support systems for different vehicle configuration concepts, first for a combination of an ascent vehicle and a habitat with integral airlocks, and then for a combined ascent vehicle-habitat with a detachable airlock. In LDAC-2, the Altair team took the ascent vehicle-habitat with detachable airlock and analyzed the design for the components that were the largest contributors to the risk of loss of crew (LOC). For life support, the largest drivers were related to oxygen supply and carbon dioxide control. Integrated abort options were developed at the vehicle level. Many life support failures were not considered to result in LOC because they had a long enough time to effect that abort was considered a feasible option to safely end the mission before the situation became life threatening. These failures were then classified as loss of mission (LOM) failures. Many options to reduce LOC risk were considered, and mass efficient solutions to the LOC problems were added to the vehicle design at the end of LDAC-2. In LDAC-3, the new design was analyzed for large contributors to the risk of LOM. To avoid ending the mission early or being unable to accomplish goals like performing all planned extravehicular activities (EVAs), various options were assessed for their combination of risk reduction and mass cost. This paper outlines the major assumptions, design features, and decisions related to the development of the life support system for the Altair project through LDAC-3.

Anderson, Molly↗

NASA NTRS2012

Open Circuit Resonant (SansEC) Sensor for Composite Damage Detection and Diagnosis in Aircraft Lightning Environments

Composite materials are increasingly used in modern aircraft for reducing weight, improving fuel efficiency, and enhancing the overall design, performance, and manufacturability of airborne vehicles. Materials such as fiberglass reinforced composites (FRC) and carbon-fiber-reinforced polymers (CFRP) are being used to great advantage in airframes, wings, engine nacelles, turbine blades, fairings, fuselage and empennage structures, control surfaces and coverings. However, the potential damage from the direct and indirect effects of lightning strikes is of increased concern to aircraft designers and operators. When a lightning strike occurs, the points of attachment and detachment on the aircraft surface must be found by visual inspection, and then assessed for damage by maintenance personnel to ensure continued safe flight operations. In this paper, a new method and system for aircraft in-situ damage detection and diagnosis are presented. The method and system are based on open circuit (SansEC) sensor technology developed at NASA Langley Research Center. SansEC (Sans Electric Connection) sensor technology is a new technical framework for designing, powering, and interrogating sensors to detect damage in composite materials. Damage in composite material is generally associated with a localized change in material permittivity and/or conductivity. These changes are sensed using SansEC. Unique electrical signatures are used for damage detection and diagnosis. NASA LaRC has both experimentally and theoretically demonstrated that SansEC sensors can be effectively used for in-situ composite damage detection.

Wang, Chuantong↗

NASA NTRSDate not supplied

OVERFLOW Analysis of Supersonic Retropropulsion Testing on a Blunt Mars Entry Vehicle Concept

Supersonic retropropulsion (SRP) flow over a Hypersonic Inflatable Aerodynamic Decelerator (HIAD) blunt-body vehicle was simulated using the Overflow Computational Fluid Dynamics (CFD) solver. Two nozzle configurations were tested (1E and 1F) as a subset of the seven total configurations in the Descent System Study (DSS) testing campaign. A generalized, Adaptive Mesh Refinement (AMR) shock capturing and plume refinement technique was developed and calibrated for producing automatic and unique grid systems optimized for any given testing condition. Solution independence from grid resolution was determined by successively increasing grid refinement until asymptotic convergence of the mean aerodynamic loads was observed. Overflow Reynolds-averaged Navier-Stokes (RANS) solutions produced realistic SRP flow phenomena, including Mach disk normal shocks contained in high-thrust plumes and bow shock triple-points. Solutions for the 1E nozzle configuration were steady. Conversely, a subset of the 1F test conditions were unsteady and exhibited periodic, non-sinusoidal expansions and contractions of the streamwise-oriented plume, resulting in unsteady aerodynamic loads on the vehicle. Initial investigations into the effect of turbulence modeling fidelity demonstrated significant differences between the aerodynamic loads simulated with RANS and Detached Eddy Simulation (DES). Multiple flow mechanisms were identified as root causes of these differences, including bow shock shape augmentation and reduced entrainment due to reduced turbulence in the DES simulations. Initial comparisons of pitching moment control authority and aerodynamic drag performance between the tested nozzle configurations demonstrated that the 1E configuration may be more advantageous for the Mars Entry, Descent, and Landing (EDL) task.

Supersonic Retropropulsion↗

NASA NTRSDate not supplied

OVERFLOW Analysis of Supersonic Retropropulsion Testing on a Blunt Mars Entry Vehicle Concept

Supersonic Retropropulsion↗

NASA NTRS2001

Bridgman Growth of Detached GeSi Crystals

The growth of detached crystals by the Bridgman technique, in which the growing crystal is not in contact with the crucible wall, has been observed both on earth and in microgravity conditions. Such detachment has particularly been in evidence in microgravity experiments, where the pressure head of the molten sample is absent. At present, the mechanisms contributing to the detachment are not completely understood and until recently detachment has not been reproducibly obtained. Key parameters which must be considered are the contact angle between the melt and the crucible and the growth angle. Another essential parameter is the pressure difference between the annular gap around the solid below the melt and the volume above the melt. Here we present results of the growth of Ge(0.98)Si(0.02) using adjustments in the applied temperature profile to control the pressure difference between the bottom and top of the melt. The technique is less susceptible to sample contamination than controlling the pressure by connecting the crucible to external gas sources. Using this technique, a pressure difference is created by decreasing the temperature in the volume above the melt while the sample is molten but prior to growth. A maximum pressure difference approximately equal to the pressure head of the molten sample can thus be obtained. Several GeSi crystals were grown in pyrolitic boron nitride crucibles. When a pressure difference was applied, samples were reproducibly grown mostly detached. For comparison, samples were also grown in a configuration in which gas could pass freely between the gap below the melt and the volume above the melt and no pressure difference could be established. These samples were initially attached. Existence of detachment was determined both by measuring the radius of the samples with a profilometer and by observations of the sample surfaces with optical and electron microscopy. The gap thickness between the crucible and detached crystal was on the order of 10 micron. The surfaces of the attached areas of the crystals had the same shape as the interior crucible wall whereas in the detached areas the crystal facets could usually be observed.

Volz, M. P.↗

NASA NTRS1985

Geometric and chronologic evolution of the Verde and Payson Basins of Central Arizona and possible relationships to detachment faulting

The Transition Zone of Arizona and the structural basins therein have been poorly understood features from a structural standpoint. This is true both of their overall geometry as well as their formation. Yet these basins have developed within the last 13 million years and thus represent perhaps the most recent phase of development related to the extensional tectonics of the Basin and Range province. Recent work (Smith, 1984; Vance, 1983) as well as some older studies (Anderson and Creasy, 1985; Pedersen and Royce, 1970) provide data on the geometry of the Verde and Payson basins which can be used to constrain some hypotheses related to the development of these basins. The work of Cloos (1868), Anderson et. al. (1983), Wernicke and Burchfiel (1982) and Davis et. al. (l980) suggest a spatial and chronologic relation exists between planar high angle normal faults and low angle detachment faults. Perhaps one of the clearest examples from the Basin and Range area appears to be from seismic reflection profiles of the Sevier Desert Basin area of Utah (Fig. 1). These profiles suggest the existence fault-controlled extension basin development above it. Faults that appear either listric or planar intersect it from above.

Brumbaugh, D. S.↗

NASA NTRS1997

STS-85 Day 05 Highlights

On this fifth day of the STS-85 mission, the flight crew, Cmdr. Curtis L. Brown, Jr., Pilot Kent V. Rominger, Payload Cmdr. N. Jan Davis (Ph.D.), Mission Specialists Robert L. Curbeam, Jr. and Stephen K. Robinson (Ph.D.), and Payload Specialist Bjarni V. Tryggvason once again test the small robotic arm serving as a prototype for one that will fly as part of the Japanese Experiment Module on the International Space Station. Simulated orbital replacement unit detachment and reattachment will be the focus. Bob Curbeam discusses the progress of the flight with a television station in St Louis, before continuing his work with the Bioreactor Demonstration System designed to perform cell biology experiments under controlled conditions. Immediately after Curbeam's interview, Canadian Payload Specialist Bjarni Tryggvason is set to talk to elementary and high school students at a summer camp in Saskatchewan, Canada.

Source record↗

NASA NTRS1995

GPS as an orbit determination subsystems

This paper evaluates the use of Global Positioning System (GPS) receivers as a primary source of tracking data for low-Earth orbit satellites. GPS data is an alternative to using range, azimuth, elevation, and range-rate (RAER) data from the Air Force Satellite Control Network antennas, the Space Ground Link System (SGLS). This evaluation is applicable to missions such as Skipper, a joint U.S. and Russian atmosphere research mission, that will rely on a GPS receiver as a primary tracking data source. The Detachment 2, Space and Missile Systems Center's Test Support Complex (TSC) conducted the evaluation based on receiver data from the Space Test Experiment Platform Mission O (STEP-O) and Advanced Photovoltaic and Electronics Experiments (APEX) satellites. The TSC performed orbit reconstruction and prediction on the STEP-0 and APEX vehicles using GPS receiver navigation solution data, SGLS RAER data, and SGLS anglesonly (azimuth and elevation) data. For the STEP-O case, the navigation solution based orbits proved to be more accurate than SGLS RAER based orbits. For the APEX case, navigation solution based orbits proved to be less accurate than SGLS RAER based orbits for orbit prediction, and results for orbit reconstruction were inconclusive due to the lack of a precise truth orbit. After evaluating several different GPS data processing methods, the TSC concluded that using GPS navigation solution data is a viable alternative to using SGLS RAER data.

Fennessey, Richard↗

NASA NTRS2003

Electric Field Effect on Bubble Detachment in Variable Gravity Environment

The subject of the present study, the process of bubble detachment from an orifice in a plane surface, shows some resemblance to bubble departure in boiling. Because of the high heat transfer coefficients associated with phase change processes, boiling is utilized in many industrial operations and is an attractive solution to cooling problems in aerospace engineering. In terrestrial conditions, buoyancy is responsible for bubble removal from the surface. In space, the gravity level being orders of magnitude smaller than on earth, bubbles formed during boiling remain attached at the surface. As a result, the amount of heat removed from the heated surface can decrease considerably. The use of electric fields is proposed to control bubble behavior and help bubble removal from the surface on which they form. The objective of the study is to investigate the behavior of individual air bubbles injected through an orifice into an electrically insulating liquid under the influence of a static electric field. Bubble cycle life were visualized in terrestrial conditions and for several reduced gravity levels. Bubble volume, dimensions and contact angle at detachment were measured and analyzed for different parameters as gravity level and electric field magnitude. Situations were considered with uniform or non-uni form electric field. Results show that these parameters significantly affect bubble behavior, shape, volume and dimensions.

Iacona, Estelle↗

NASA NTRS1994

Modeling fluvial erosion on regional to continental scales

The fluvial system is a major concern in modeling landform evolution in response to tectonic deformation. Three stream bed types (bedrock, coarse-bed alluvial, and fine-bed alluvial) differ in factors controlling their occurrence and evolution and in appropriate modeling approaches. Spatial and temporal transitions among bed types occur in response to changes in sediment characteristics and tectonic deformation. Erosion in bedrock channels depends upon the ability to scour or pluck bed material; this detachment capacity is often a power function of drainage area and gradient. Exposure of bedrock in channel beds, due to rapid downcutting or resistant rock, slows the response of headwater catchments to downstream baselevel changes. Sediment routing through alluvial channels must account for supply from slope erosion, transport rates, abrasion, and sorting. In regional landform modeling, implicit rate laws must be developed for sediment production from erosion of sub-grid-scale slopes and small channels.

Howard, Alan D.↗

NASA NTRS2004

Experimental, Theoretical, and Computational Investigation of Separated Nozzle Flows

A detailed experimental, theoretical, and computational study of separated nozzle flows has been conducted. Experimental testing was performed at the NASA Langley 16-Foot Transonic Tunnel Complex. As part of a comprehensive static performance investigation, force, moment, and pressure measurements were made and schlieren flow visualization was obtained for a sub-scale, non-axisymmetric, two-dimensional, convergent- divergent nozzle. In addition, two-dimensional numerical simulations were run using the computational fluid dynamics code PAB3D with two-equation turbulence closure and algebraic Reynolds stress modeling. For reference, experimental and computational results were compared with theoretical predictions based on one-dimensional gas dynamics and an approximate integral momentum boundary layer method. Experimental results from this study indicate that off-design overexpanded nozzle flow was dominated by shock induced boundary layer separation, which was divided into two distinct flow regimes; three- dimensional separation with partial reattachment, and fully detached two-dimensional separation. The test nozzle was observed to go through a marked transition in passing from one regime to the other. In all cases, separation provided a significant increase in static thrust efficiency compared to the ideal prediction. Results indicate that with controlled separation, the entire overexpanded range of nozzle performance would be within 10% of the peak thrust efficiency. By offering savings in weight and complexity over a conventional mechanical exhaust system, this may allow a fixed geometry nozzle to cover an entire flight envelope. The computational simulation was in excellent agreement with experimental data over most of the test range, and did a good job of modeling internal flow and thrust performance. An exception occurred at low nozzle pressure ratios, where the two-dimensional computational model was inconsistent with the three-dimensional separation observed in the experiment. In general, the computation captured the physics of the shock boundary layer interaction and shock induced boundary layer separation in the nozzle, though there were some differences in shock structure compared to experiment. Though minor, these differences could be important for studies involving flow control or thrust vectoring of separated nozzles. Combined with other observations, this indicates that more detailed, three-dimensional computational modeling needs to be conducted to more realistically simulate shock-separated nozzle flows.

Hunter, Craig A.↗

NASA NTRS1979

Engine induced structural-borne noise in a general aviation aircraft

This paper describes a study of engine induced structural-borne noise in a single engine light aircraft. Cabin noise and fuselage vibration levels were recorded during ground tests for engine-attached, engine-detached, interior-installed, and interior-removed configurations. By comparisons of the data, engine induced structure-borne noise is shown to be a primary source of cabin noise. Corresponding fuselage vibration levels were quite high with energy concentrated mainly in the lower frequencies. A measure of the noise control effectiveness of the interior trim was also obtained.

Unruh, J. F.↗

NASA NTRS2003

In-Situ Pressure Measurements During the Detached Growth of Germanium

Crystal growth by the vertical Bridgman method in which there is little or no contact between the wall and the crystal has been termed detached solidification. Detachment has been observed frequently in previous microgravity experiments, and has been reported under some terrestrial conditions as well. It is expected that detachment can be conditioned by establishing an appropriate pressure difference below and above the melt. To test this hypothesis, an experimental technique has been developed to measure this pressure difference during the growth of germanium by the vertical Bridgman method. The apparatus allows for both monitoring the pressures and actively controlling them during growth. For a given melt height, there is a maximum pressure difference attainable before gas bubbles up through the melt. This maximum pressure increases with increasing melt height. As the melt height approaches zero, the maximum pressure difference, about 20 mbar in these experiments, is determined by the surface tension and gap width of the meniscus at the bottom of the melt.

Volz, M. P.↗

NASA NTRS1989

Suitport extra-vehicular access facility

In a system for entering and leaving a space station, a bulkhead divides the module into an antechamber and an airlock. A space suit has a portable life support system (PLSS) interface on its back. The suit is removably attached to the bulkhead by the interface at a hatch in the bulkhead. A PLSS is detachably mounted in the hatch cover, which is pivotally mounted to move away from the hatch to allow an astronaut to enter the suit through the open hatch and the PLSS interface. After entering the suit, the astronaut closes the hatch and attaches the PLSS to the suit by the operating control to which the glove portion of the suit is attached. The astronaut initiates pumpdown of the airlock with the control. When the pumpdown is complete, the astronaut opens the hatch, disconnects the PLSS from the hatch cover, pivots the pressure vessels of the control to one side on their supports, disconnects the glove portions from the pressure vessels and goes EVA.

Cohen, Marc M.↗

NASA NTRS1999

STS-31 Mission Highlights Resource Tape

The primary objective of mission STS-31 was to deploy the Hubble Space Telescope. The commander of the mission was Loren J. Shriver. The crew was pilot Charles F. Bolden, and Mission Specialists, Steven A. Hawley, Bruce McCandless II, and Kathryn D. Sullivan. The mission was launched on April 24, 1990. This videotape shows the astronauts at their pre-launch breakfast, their final preparations for launch and boarding the Shuttle Discovery. It shows the launch and the detachment of the rocket boosters. It shows the deployment of the Hubble Telescope and the unfurling of its Solar Arrays. Other payloads include the Protein Crystal Growth (PCG) experiment, and the Radiation Monitoring Equipment III, to measure gamma ray levels in the crew cabin. The videotape shows many shots of the Kennedy Mission Control room and the shuttle cockpit. The videotape finally shows the landing at Edwards Air Force Base, and the crew disembarking the shuttle.

Source record↗