Search NASA⌕ Search

SEARCH · Search NASA

Results for “distribution line modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Formation of the Potential Jump Over the Geomagnetically Quiet Sunlit Polar Cap Region

We consider the formation of a potential drop over the Earth's polar cap duringgeomagnetically quiet daytime. The observed potential drop is primarily defined by the hydrogen,photoelectron, and polar rain fluxes ratios and depends strongly on the energy distribution of thephotoelectron flux. Polar rain is an essential component of the model required for plasma quasineutrality.The potential distribution along the magnetic field line has two regions, with a small, gradual, potentialdrop of 3–4 V and a potential jump. The value of the potential jump depends on the hydrogen ion tophotoelectron flux ratio and is also controlled by polar rain electrons. With quasineutrality required at itsupper boundary, the jump only occurs in the presence of polar rain and its location depends on the polarrain flux. Model predictions compare well with FAST observations presented by Kitamura et al.(2012, https://doi.org/10.1029/2011JA017459).

Khazanov, George V.↗
NASA NTRS1997

Generalized Kinetic Description of Steady-State Collisionless Plasmas

We present a general solution to the collisionless Boltzmann (Vlasov) equation for a free-flowing plasma along a magnetic field line using Liouville's theorem, allowing for an arbitrary potential structure including non-monotonicities. The constraints of the existing collisionless kinetic transport models are explored, and the need for a more general approach to the problem of self- consistent potential energy calculations is described. Then a technique that handles an arbitrary potential energy distribution along the field line is presented and discussed. For precipitation of magnetospherically trapped hot plasma, this model yields moment calculations that vary by up to a factor of two for various potential energy structures with the same total potential drop. The differences are much greater for the high-latitude outflow scenario, giving order of magnitude variations depending on the shape of the potential energy distribution.

Khazanov, G. V.↗
NASA NTRS1984

An inerference assessment approach for a three-dimensional slotted tunnel with sparse wall pressure data

The various procedures referred to as wall interference assessment and correction procedures presume the existence of a surface distribution of data (usually static pressure) measured over a surface on or near the tunnel walls for each test point to be assessed. An alternative approach in which a reasonably sophisticated computer model of the test section flow would be fitted parametrically to a sparse set of measured data is presented. The measurements provides line distributions of static pressure near the center lines of the top, side and bottom walls. The development of a test section model incorporating explicit recognition of discrete slots of finite length with controlled flow reentry into the solid wall downstream portion of the tunnel is shown.

Kemp, W. B., Jr.↗
NASA NTRS1968

Line blanketing in stars.

Scaled solar and gray-body temperature distribution models compared to determine stellar atmosphere

Swamy, K. S. K.↗
NASA NTRS1990

The red and green lines of atomic oxygen in the nightglow of Venus

O(1D) and O(1S), the excited states that give rise to the atomic oxygen red and green lines, are produced in the Venus nightglow in dissociative recombination of O2(+). The emissions should also be excited by precipitation of soft electrons, the suggested source of the 'auroral' emission features of atomic oxygen at 1304 and 1356 A, which have been reported from observations of the Pioneer Venus Orbiter Ultraviolet Spectrometer. No emisison at 6300 or 5577 A was detected, however, by the visible spectrophotometers on the Soviet spacecraft Veneras 9 and 10; upper limits have been placed on the intensities of these features. The constraints placed on models for the auroral production mechanism by the Venera upper limits by modeling the intensities of the red and green lines in the nightglow are evaluated, combining a model for the vibrational distribution of O2(+) on the nightside of Venus with rate coefficients recently computed by Guberman for production of O(1S) and O(1D) in dissociative recombination of O2(+) from different vibrational levels. The integrated overhead intensities are 1 - 2 R for the green line and about 46 R for the red line.

Fox, J. L.↗
NASA NTRS1977

A catalog of 0.2 A resolution far-ultraviolet stellar spectra measured with Copernicus

Spectra between 1000 and 1450 A for 60 O- and B-type stars observed by Copernicus at 0.2-A resolution are presented in three forms: tables containing the numerical data, plots showing renormalized spectra, and synthetic photographic spectra. The data have been corrected for all instrument effects of importance for the photometric accuracy except fluctuations in continuum level caused by small variations in spacecraft guidance. Spectrometer sensitivity curves are provided for use in converting to absolute fluxes. It is expected that this catalog will be of use for research on many aspects of stellar UV spectra, including spectral classification, line identification, abundance determinations, spectrum synthesis, model atmosphere calculations, flux distributions, bolometric corrections, stellar winds, and mass loss.

Snow, T. P., Jr.↗
NASA NTRS1992

The contribution of stars to the AGN line emission

It has been suggested that the presence of red giants in the vicinity of an active nucleus can contribute significantly to the line emission by the reprocessing of the continuum radiation onto the red giant's surface or in the stellar wind that usually accompanies these stars. We present herein the line profiles and the corresponding transfer functions for this model for the line emission, using a realistic phase space distribution function for the stars in the vicinity of the active nucleus.

Taylor, Jason A.↗
NASA NTRS2003

Simulation System for Training in Laparoscopic Surgery

A computer-based simulation system creates a visual and haptic virtual environment for training a medical practitioner in laparoscopic surgery. Heretofore, it has been common practice to perform training in partial laparoscopic surgical procedures by use of a laparoscopic training box that encloses a pair of laparoscopic tools, objects to be manipulated by the tools, and an endoscopic video camera. However, the surgical procedures simulated by use of a training box are usually poor imitations of the actual ones. The present computer-based system improves training by presenting a more realistic simulated environment to the trainee. The system includes a computer monitor that displays a real-time image of the affected interior region of the patient, showing laparoscopic instruments interacting with organs and tissues, as would be viewed by use of an endoscopic video camera and displayed to a surgeon during a laparoscopic operation. The system also includes laparoscopic tools that the trainee manipulates while observing the image on the computer monitor (see figure). The instrumentation on the tools consists of (1) position and orientation sensors that provide input data for the simulation and (2) actuators that provide force feedback to simulate the contact forces between the tools and tissues. The simulation software includes components that model the geometries of surgical tools, components that model the geometries and physical behaviors of soft tissues, and components that detect collisions between them. Using the measured positions and orientations of the tools, the software detects whether they are in contact with tissues. In the event of contact, the deformations of the tissues and contact forces are computed by use of the geometric and physical models. The image on the computer screen shows tissues deformed accordingly, while the actuators apply the corresponding forces to the distal ends of the tools. For the purpose of demonstration, the system has been set up to simulate the insertion of a flexible catheter in a bile duct. [As thus configured, the system can also be used to simulate other endoscopic procedures (e.g., bronchoscopy and colonoscopy) that include the insertion of flexible tubes into flexible ducts.] A hybrid approach has been followed in developing the software for real-time simulation of the visual and haptic interactions (1) between forceps and the catheter, (2) between the forceps and the duct, and (3) between the catheter and the duct. The deformations of the duct are simulated by finite-element and modalanalysis procedures, using only the most significant vibration modes of the duct for computing deformations and interaction forces. The catheter is modeled as a set of virtual particles uniformly distributed along the center line of the catheter and connected to each other via linear and torsional springs and damping elements. The interactions between the forceps and the duct as well as the catheter are simulated by use of a ray-based haptic-interaction- simulating technique in which the forceps are modeled as connected line segments.

Basdogan, Cagatay↗
NASA NTRS1985

Program Predicts Nonlinear Inverter Performance

Program developed for ac power distribution system on Shuttle orbiter predicts total load on inverters and node voltages at each of line replaceable units (LRU's). Mathematical model simulates inverter performance at each change of state in power distribution system.

Al-Ayoubi, R. R.↗
NASA NTRS1993

Testing the pressure-confined Ly alpha cloud model

The Ly-alpha absorption line forest, seen in quasar spectra, is generally interpreted as being due to cosmologically distributed 'clouds' of primordial gas. Analyses of the observations reveal that the number distribution can be described by power laws: dN/dz is proportional to (1 + z)(sup gamma) and dN/dN(sub HI) is proportional to N(sub HI)(sup -beyda), where N(sub HI) is the HI column density. The typical values for power law indices range between 2 is approximately less than gamma is approximately less than 2.6 and 1.7 is approximately less than gamma is approximately less than 1.9. One model postulates that the Ly-alpha clouds are optically thin entities, photoionized by the background UV flux, J(sub nu) is proportional to (1 + z)(sup j), and confined by an adiabatically evolving intercloud medium (ICM): P(z) is proportional to (1 + z)(sup 5). Analytic studies of this model suggest that the ensuing Ly-alpha line statistics can account for the observations (in particular, the dN/dz and the dN/dN(sub HI) distributions) if the cloud mass spectrum is a power law dN/dN is proportional to M(sup -delta), delta is approximately 1.9, and j is approximately 4. One of the simplifying assumptions incorporated into these studies is the existence of a large mass range for the clouds at all epochs, the validity of which is questionable. The pressure-confined model is investigated using a 1-D spherically symmetric hydrodynamical code to simulate cloud evolution over the epoch 1.8 less than z less than 6. This enables us to relax many of the assumptions incorporated in the analytic studies.

Babul, Arif↗
NASA NTRS1996

The Spatial Intensity Distribution of the UV Light in HH Objects. Revisited

Simple kinematical bow shock models have successfylly explained many of the observed features in Herbig-Haro objects. It is shown that similar models can be applied to the spatial intensity distribution of the UV lines observed by IUE. Archival IUE spectra have been used for the HH 1, HH 2(H+A'), HH 2(G+B), HH 24A, HH 32A, HH 43(A+B+C), and HH 47A objects where the brightest UV lines (C IV (lambda)1549,Si III(lambda)1891, C III] (lambda)1909, C II] (lambda)2326, MgII (lambda)2799) were studied, as well as the UV continuum (modeled by the hydrogen two-photon contiuum). The quality of the IUE data is rather limited due to the broad point spread function and the low signal-to-noise, and therefore the models were degraded to make them comparable to the observations. The physical parameters used in the models were obtained from previous optical studies and varied accordingly to match the observations, but within the known uncertainties. The objects were modeled by a single bow shock model (i.e., HH 1, HH 24A, HH 32A, and HH 47A) or the superposition of two (i.e., HH 2(H+A') and HH 2(G+B) or more (i.e., HH 43(A+B+C)) of them. The idea was to take into account the complexity of the morphology of these objects, and the contribution to the UV light from diffrent condensations within the IUE aperature.

Moro-Martin, A.↗
NASA NTRS1961

Heat-Transfer Measurements on the Apexes of Two 60 deg Sweptback Delta Wings (Panel Semiapex Angle of 30 deg) Having 0 deg and 45 deg Dihedral at a Mach Number of 4.95

An experimental investigation was conducted to evaluate the heat-transfer rates at the apex of two 60 degree sweptback delta wings (panel semi-apex angle of 30 degrees) having cylindrical leading edges and 0 degrees and 45 degree positive dihedral. The models tested might correspond to the first several feet of a hypersonic reentry vehicle. The tests were conducted at a Mach number of 4.95 and a stagnation temperature of 400 F. nominal test-section unit Reynolds numbers varied from 2 x 10(exp 6) to 12 x 10(exp 6) per foot. The results of the investigation indicated that the laminar heat-transfer distributions (ratio of local to stagnation-line heating rate) about the models normal to the leading edges were in close agreement with two-dimensional blunt-body theory. The three-dimensional stagnation point heat-transfer rate on the 0 degree dihedral model was in excellent agreement with theory and the stagnation-line heat transfer on the straight portion of the leading edge of both models approached a constant level 12 percent above the theoretical stagnation-line level on an isolated swept infinite cylinder. When the heating rates on the 45 degree dihedral model (planform sweep of 69.3 degree) were compared with those on the 0 degree dihedral model (planform sweep of 60 degrees) at equal angles of attack and equal lifts greater than zero, the stagnation-line heating rates on the 45 degrees dihedral model were, in general, considerably lower as a result of the difference in effective sweeps of the leading edges. On the wing panels inboard from the stagnation lines, the differences in heating were very small. The stagnation-line heat-transfer variation with angle of attack, the shift in stagnation-line location, and the reduction in stagnation-line heat transfer resulting from the increase in effective sweep when positive dihedral is incorporated into a constant-panel 0 degree dihedral wing, all agreed with the results of a theoretical study made of highly swept delta wings with large positive dihedral.

Gunn, Charles R.↗
NASA NTRS2019

Formation of the Potential Jump over the Geomagnetically Quiet Sunlit Polar Cap Region

We consider the formation of a potential drop over the Earth's polar cap during geomagnetically quiet daytime. The observed potential drop is primarily defined by the hydrogen, photoelectron, and polar rain fluxes ratios and depends strongly on the energy distribution of the photoelectron flux. Polar rain is an essential component of the model required for plasma quasineutrality. The potential distribution along the magnetic field line has two regions, with a small, gradual, potential drop of 3 to 4 volts and a potential jump. The value of the potential jump depends on the hydrogen ion to photoelectron flux ratio and is also controlled by polar rain electrons. With quasineutrality required at its upper boundary, the jump only occurs in the presence of polar rain and its location depends on the polar rain flux. Model predictions compare well with FAST (Fast Auroral SnapshoT) observations presented by Kitamura et al.(2012, https://doi.org/10.1029/2011JA017459).

Khazanov, G. V.↗
NASA NTRS1993

Sharp edges to neutral hydrogen disks in galaxies and the extragalactic radiation field

It is shown that the very sharp truncation of the neutral hydrogen distribution seen in NGC 3198 (and probably M33) is well modeled as the result of ionization of the atomic gas by the extragalactic radiation field. Below a critical column density of about a few times 10 exp 19/sq cm the gas is dominantly ionized and undetectable in the 21-cm line. It is inferred from the photoionization models that the total disk gas distribution in NGC 3198 is actually fairly axisymmetric. The critical column density for ionization is not a strong function of galaxy mass or mass distribution; thus, all galaxies should show a cutoff at approximately the same column density. Specific models of 3198 suggest that the extragalactic ionizing photon flux is 5000-10,000 photons/sq cm s.

Maloney, Philip↗
NASA NTRS1992

The remarkable twisted disk of NGC 4753 and the shapes of galactic halos

The complex dust lanes in the S0 galaxy NGC 4753 are shown to be consistent with a disk that is strongly twisted by differential precession. Yet another peculiar S0 can therefore be explained as the result of an accretion event. An evolving disk model is fitted to the observed distribution. This disk is inclined by 15 deg relative to the galaxy's equatorial plane and twisted such that its line of nodes changes smoothly by 3.8 pi over a factor of seven in radius. The model indicates that most of the galaxy's mass is unseen, is nearly spherically distributed, and has a nearly scale-free spatial distribution. The ellipticity of the total galactic mass distribution must be constant to within 20 percent over the radial extent of the twisted disk - a conclusion which may significantly constrain galaxy formation mechanisms.

Steiman-Cameron, Thomas Y.↗
NASA NTRS1992

Of narrow lines and beaming in the strong-field SSC emission model

The synchrotron self-Compton (SSC) emission model for gamma-ray bursts is capable of producing narrow line features for a variety of modelled field strengths, primary electron injection distributions and burst luminosities. Multiple resonant scattering with synchrotron continuum photons efficiently traps and cools pairs in the ground state to an average energy where the Compton energy loss rate is zero. Annihilation between pairs in these cooled distributions can be very efficient. For isotropic injection of primary electrons, there is an anti-correlation of the intensity of the angular-binned emission between the portions of the continuum spectrum below the cyclotron peak and above the annihilation line feature. Small-angle emission dominates the continuum above the annihilation line feature and is smooth through the line up to the pair production cut-off, which can be above several MeV for small enough angles. The angle-averaged annihilation line is made of components which can have peak emission centered at energies away from 511 keV, due to Doppler shifting. For beamed injection,the annihilation line breaks up into relatively narrow components in the angular emission, which sum into a broad feature in the angle-averaged emission.

Preece, Robert D.↗
NASA NTRS1996

Modeling, Monitoring and Fault Diagnosis of Spacecraft Air Contaminants

Progress and results in the development of an integrated air quality modeling, monitoring, fault detection, and isolation system are presented. The focus was on development of distributed models of the air contaminants transport, the study of air quality monitoring techniques based on the model of transport process and on-line contaminant concentration measurements, and sensor placement. Different approaches to the modeling of spacecraft air contamination are discussed, and a three-dimensional distributed parameter air contaminant dispersion model applicable to both laminar and turbulent transport is proposed. A two-dimensional approximation of a full scale transport model is also proposed based on the spatial averaging of the three dimensional model over the least important space coordinate. A computer implementation of the transport model is considered and a detailed development of two- and three-dimensional models illustrated by contaminant transport simulation results is presented. The use of a well established Kalman filtering approach is suggested as a method for generating on-line contaminant concentration estimates based on both real time measurements and the model of contaminant transport process. It is shown that high computational requirements of the traditional Kalman filter can render difficult its real-time implementation for high-dimensional transport model and a novel implicit Kalman filtering algorithm is proposed which is shown to lead to an order of magnitude faster computer implementation in the case of air quality monitoring.

Ramirez, W. Fred↗
NASA NTRS1975

A quantitative magnetospheric model derived from spacecraft magnetometer data

The model is derived by making least squares fits to magnetic field measurements from four Imp satellites. It includes four sets of coefficients, representing different degrees of magnetic disturbance as determined by the range of Kp values. The data are fit to a power series expansion in the solar magnetic coordinates and the solar wind-dipole tilt angle, and thus the effects of seasonal north-south asymmetries are contained. The expansion is divergence-free, but unlike the usual scalar potential expansion, the model contains a nonzero curl representing currents distributed within the magnetosphere. The latitude at the earth separating open polar cap field lines from field lines closing on the day side is about 5 deg lower than that determined by previous theoretically derived models. At times of high Kp, additional high-latitude field lines extend back into the tail. Near solstice, the separation latitude can be as low as 75 deg in the winter hemisphere. The average northward component of the external field is much smaller than that predicted by theoretical models; this finding indicates the important effects of distributed currents in the magnetosphere.

Mead, G. D.↗