Search NASA⌕ Search

SEARCH · Search NASA

Results for “diurnal cycle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Life cycle greenhouse gas emissions of different CO 2 supply options for an algal biorefinery

This paper characterizes the greenhouse gas (GHG) emissions from the provision of CO 2 for twelve hours of the day from a range of sources operating on a twenty-four-hour basis. Twelve CO 2 supply cases spanning from fossil fuel power plant stack gases to direct air capture (DAC) systems are modeled. The results are compared in a life cycle assessment (LCA) framework. The CO 2 supply from the combustion or gasification of biomass has GHG emissions of –1.62 gCO 2 eq./g CO 2 delivered and is the case with the lowest carbon footprint for supplied CO2. The emissions for all the CO 2 supply cases were found to be negative, either because of capturing more CO 2 from the atmosphere than is released from the CO 2 production process, or because of production of excess electricity that is exported to the grid (replacing emissions from grid electricity). A purpose-built Natural Gas Combined Cycle (NGCC) power plant CO 2 source has the highest GHG emissions of -0.40 gCO 2 eq./gCO 2 delivered of the cases considered because of nighttime emissions and natural gas supply chain losses. The impact of a diurnal cycle can be mitigated by using capture and refrigeration systems as part of the CO 2 management system. The results are sensitive to the GHG emissions of the grid electricity, which is imported or exported in different cases. The results provide a benchmark for the comparison of different CO 2 supply options for the establishment of a sustainable algal biorefinery.

42 ENGINEERING↗
DOE OSTI2023

Description and Evaluation of a New Deep Convective Cloud Model Considering In-cloud Inhomogeneity

Convections still need to be parameterized in general circulation models (GCMs) in the coming decades. Performances of GCMs are significantly influenced by the convection schemes used. In contrast to most conventional cloud models that ignore in-cloud inhomogeneities, a new convective cloud model explicitly considering in-cloud inhomogeneities is developed. The new model adopts a single bulk plume approach, but divides the plume into a series of interacting sub-plumes in order to mimic the transition from the plume core to its edges. We implemented the new cloud model in NCAR Community Atmosphere Model version 5.0 (CAM5) and evaluated its performance. Single-column tests show a stronger mass flux profile and low-level detrainment with the new model. In global simulations, the long-lasting wet bias in the tropical free troposphere of CAM5 is alleviated. Spatial pattern and intensity distribution of precipitation is improved, but the global hydrological cycle is slightly over-enhanced. The diurnal cycle of tropical precipitation is also better captured though the precipitation peak still occurs earlier than the observations and the amplitude of the cycle tends to weaken. MJO simulation is slightly improved with the new scheme. In addition, the new cloud model generated more tropical cyclones, in better agreement with observations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Photoinhibition of comammox reaction in Nitrospira inopinata in a dose- and wavelength-dependent manner

Apparent contribution of complete ammonia-oxidizing organisms (comammox) to the global nitrogen cycle highlights the necessity for understanding niche differentiation of comammox bacteria among other ammonia oxidizers. While the high affinity for ammonia of the comammox species Nitrospira inopinata suggests their niche partitioning is expected to be centered in oligotrophic environments, their absence in nutrient-depleted environments (such as the oceans) suggests that other (abiotic) factors might control their distribution and spatial localization within microbial communities. Many ammonia- and nitrite-oxidizing organisms are sensitive to light; however, the photosensitivity of comammox has not been explored. Since comammox bacteria encode enzymatic machinery homologous to canonical ammonia-and nitrite-oxidizers, we hypothesized that comammox N. inopinata, the only available pure culture of this group of microorganisms, may be inhibited by illumination in a similar manner. We evaluated the impact of light intensity, wavelength, and duration on the degree of photoinhibition for cultures of the comammox species N. inopinata and the soil ammonia-oxidizing archaea Nitrososphaera viennensis. Both species were highly sensitive to light. Interestingly, mimicking diurnal light exposure caused an uncoupling of ammonia and nitrite oxidation in N. inopinata, indicating nitrite oxidation might be more sensitive to light exposure than ammonia oxidation. It is likely that light influences comammox spatial distribution in natural environments such as surface fresh waters according to diurnal cycles, light attenuation coefficients, and the light penetration depths. Our findings therefore provide ecophysiological insights for further studies on comammox both in field and laboratory settings.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Precipitation Characteristics of Warm Season Weather Types in the Southeastern United States of America

Daily weather types (WTs) over the Southeast United States have been analyzed using 850 hPa winds from reanalysis data from March to October of 1979–2019. Six WTs were obtained. WTs 1–3 represent mid-latitude synoptic systems propagating eastward. WT4 is a summer-type pattern predominantly occurring in June–August, with the center of the North Atlantic Subtropical High (NASH) along the Gulf coast in the southern United States. WT5 is most frequent from August to middle October, with the NASH pushed further north and southerly winds over the northern Great Plains. An anticyclone centered at the Carolina coast characterizes WT6, which occurs in all months but is slightly more frequent in the spring and fall, especially in October, corresponding to fair weather in the region. WTs 1, 2 and 3 can persist for only a few days. WTs 4, 5 and 6 can have long spells of persistence. Besides self-persistence, the most observed progression loop is WT1 to WT2, to WT3, and then back to WT1, corresponding to eastward-propagating waves. WTs 4 and 5 are likely to show persistence, with long periods of consecutive days. WT6 usually persists but can also transfer to WT3, i.e., a change from fair weather in the Southeast U.S. to rainy weather in the Mississippi River Valley. A diurnal cycle of precipitation is apparent for each WT, especially over coastal plains. The nocturnal precipitation in central U.S. is associated with WT3. WTs 1–3 are more frequent in El Niño years, corresponding to stronger westerly wave activities and above normal rainfall in the Southeast U.S. in the spring. The positive rainfall anomaly in the Mississippi and Ohio River valley in El Niño years is also associated with more frequent WT3.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Diurnal Trends and Meteorological Factors Influencing the Variability of Fluorescent Bioaerosol in Mt. Crested Butte, Colorado During SAIL

Abstract Despite the crucial role of bioaerosol particles (BAP) in our climate system, local ecosystems, and human health, our grasp on their atmospheric interactions is hampered by a lack of high‐resolution and long‐term data, which is essential for understanding their abundance and variability in response to meteorological conditions. To discern these relationships in a high‐altitude mountainous terrain is even less well‐studied. Therefore, we deployed a Wideband Integrated Bioaerosol Sensor (WIBS‐Neo) for three months during the first biologically active season of the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign in summer 2022 on Mt. Crested Butte in Colorado (elevation 3,140 m ASL). Here, we report real‐time fluorescent BAP (FBAP) data collected from 15 June to 13 September 2022, sampled from within the ARM Aerosol Observing System (AOS). To our knowledge, these are the first high altitude (>3,000 m ASL) continuous measurements of FBAP made in North America. During this deployment, we observed on average 21% and as many as 48% (hourly maximum) of particles within the detection size range ( to ) of the WIBS as FBAP. Our analysis presents the diurnal cycles for seven distinct types of FBAP, showing unique patterns and, in some cases, correlations with temperature and solar radiation cycles. Abundance and composition of FBAP varied with relative humidity and precipitation. Precipitation events appeared to both cause emission and removal of FBAP, whereas dust and smoke events had no significant effect, highlighting the critical role of meteorology on FBAP at high altitudes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Development of a Time-Height Profile Assimilation Technique for Large-Eddy Simulation

Mesoscale-to-microscale coupling (MMC) aims to address the limited scope of traditional large-eddy simulations by driving the microscale flow with information concerning large-scale weather patterns provided by mesoscale models. We present a new offline MMC technique for horizontally homogeneous microscale flow conditions, in which internal forcing terms are computed based on mesoscale time–height profiles of mean-flow quantities. The advantage of such an approach is that it can be used to drive a microscale simulation with either mesoscale or observational data, and that it does not rely on specific terms in the mesoscale budget equations, which are typically not part of the default output of a mesoscale solver. The performance of the proposed profile assimilation technique is assessed based on the simulation of a typical diurnal cycle over the Scaled Wind Farm Technology site in west Texas. Results indicate that simple data assimilation techniques lead to unphysically high levels of shear and turbulence caused by the algorithm’s inability to cope with inaccuracies in the mesoscale time–height profiles. Modifying the algorithm to account for vertical coherence in the mesoscale source terms gives the microscale solver a greater ability to correct the provided mesoscale time–height profiles, leading to improved predictions of shear and turbulence statistics. The resulting turbulence statistics are in good agreement with meteorological tower observations and simulation results obtained with state-of-the-art coupling techniques using mesoscale budget components.

data assimilation↗
DOE OSTI2024

The use of idealised experiments in testing a new convective parametrization: Performance of CoMorph-A

CoMorph is a new mass-flux convection parametrization under development at the Met Office designed for use within the Unified Model and its successor model, LFRic. Use of a three-dimensional idealised model enables controlled tests of the performance of the scheme across different regimes. This includes the interaction between the physical parametrizations and the resolved dynamics, allowing study of the emergent organisation of convection on the resolved scale. A selection of well-known cases is revisited here, with the purpose of documenting the extent to which CoMorph captures a range of important, but challenging, behaviour such as the diurnal cycle and sensitivity to tropospheric moisture. Simulations using CoMorph-A, a new physics package, that has been demonstrated to perform well at numerical weather prediction (NWP) and climate scales, are compared against the current global atmosphere configuration and high-resolution results. In addition to an entirely new convection scheme, the package of changes includes significant changes to the cloud, microphysics, and boundary-layer parametrizations. Recognising that CoMorph-A is the first version of a scheme that will continue to be substantially developed and to obtain good performance, compromises in tuning have had to be made. These idealised tests therefore show what works well in this configuration, and what areas will require further work. As such, it is quite a demanding testbed and could be viewed as some of the equipment required for a “convective playground”.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Creep-fatigue Behavior and Damage Accumulation of a Candidate Structural Material for Concentrating Solar Power Solar Thermal Receiver (Final Technical Report)

Creep-fatigue deformation is an important consideration for a thermal receiver in Concentrating Solar Power systems due to the constant static stress or pressure, diurnal cycling, and elevated service temperatures required for efficient operation. An accurate description of the creep-fatigue behavior, not available for five of the six candidate materials, is important for assessment of preliminary designs. This project has provided a detailed analysis of the creep-fatigue behavior and damage accumulation of Alloy 740H, a candidate structural material for a CSP solar thermal receiver to address a critical knowledge barrier for receiver designs identified in the CSP Gen3 Demonstration Roadmap. This project was divided in to three tasks, split between two general categories: Experimental and design methodology. Tasks 1 and 3, relating to the collection of data on Alloy 740H plate and sheet forms, respectively, were performed at the Idaho National Laboratory and used as input to Task 2, the development of design methodology performed at Argonne National Laboratory. Experimental work covered limited tensile and creep testing to fill gaps in available data that is currently available and to demonstrate how the plate of Alloy 740H tested in this work compared to historical data. A more substantial testing program for fatigue and creep-fatigue was performed, with particular emphasis on creep-fatigue as there is little available data and it is necessary to understand the creep-fatigue interaction and develop related design models. This effort includes the development of rules for the design of solar receiver components against high temperature creep-fatigue and ratcheting failure modes. The ASME Code rules for high temperature nuclear components was used to the basis of the method but adjustments will be made to reflect the generally shorter, diurnal operating cycles of thermal receivers and the relative consequences of failure, comparing nuclear to solar components. This work has provided guidance for the design of components for concentrating power facilities operating at high temperatures and undergoing high, secondary thermal stresses relative to the applied primary pressure stress. The design rules were developed for the design of Generation 3 CSP tubular receivers manufactured from Alloy 740H, but are generally applicable to a wide range of component types undergoing similar loads. Procedural design rules for components to be used in conjunction with the 2019 edition of the ASME Boiler & Pressure Vessel Code and the corresponding design data for Alloy 740H have been developed. A commentary describing the rationale behind the design rules and the data underlying the design material properties, as well as an extensive set of worked sample problems detailing the application of the rules to CSP components were developed as a part of this project, with a separate report covering these aspects in detail and included in the Appendix of this report.

14 SOLAR ENERGY↗
DOE OSTI2025

Too dim, too bright, and just right: Systems analysis of the Chlamydomonas diurnal program under limiting and excess light

Photosynthetic organisms coordinate their metabolism and growth with diurnal light, which can range in intensity from limiting to excessive. Little is known about how light intensity impacts the diurnal program in Chlamydomonas reinhardtii, or how diurnal rhythms in gene expression and metabolism shape photoprotective responses at different times of day. To address these questions, we performed a systems analysis of synchronized Chlamydomonas populations acclimated to low, moderate, and high diurnal light. Transcriptomic and proteomic data revealed that the Chlamydomonas rhythmic gene expression program is resilient to limiting and excess light: genome-wide, waves of transcripts, and proteins peak at the same times in populations acclimated to stressful light intensities as in populations acclimated to moderate light. Yet, diurnal photoacclimation gives rise to hundreds of gene expression changes, even at night. Time course measurements of photosynthetic efficiency and pigments responsive to excess light showed that high light-acclimated cells partially overcome photodamage in the latter half of the day prior to cell division. Although gene expression and photodamage are dynamic over the diurnal cycle, Chlamydomonas populations acclimated to low and high diurnal light maintain altered photosystem abundance, thylakoid architecture, and non-photochemical quenching capacity through the night phase. This suggests that cells remember or anticipate the light intensities that they have typically encountered during the day. The integrated data constitute an excellent resource for understanding photoacclimation in eukaryotes under environmentally relevant conditions.

Dupuis, Sunnyjoy↗
DOE OSTI2023

Spatial and temporal metagenomics of river compartments reveals viral community dynamics in an urban impacted stream

Although river ecosystems constitute a small fraction of Earth’s total area, they are critical modulators of microbially and virally orchestrated global biogeochemical cycles. However, most studies either use data that is not spatially resolved or is collected at timepoints that do not reflect the short life cycles of microorganisms. To address this gap, we assessed how viral and microbial communities change over a 48-hour period by sampling surface water and pore water compartments of the wastewater-impacted River Erpe in Germany. We sampled every 3 hours resulting in 32 samples for which we obtained metagenomes along with geochemical and metabolite measurements. From our metagenomes, we identified 6,500 viral and 1,033 microbial metagenome assembled genomes (MAGs) and found distinct community membership and abundance associated with each river compartment (e.g., Competibacteraceae in surfacewater and Sulfurimonadaceae in pore water). We show that 17% of our viral MAGs clustered to viruses from other ecosystems like wastewater treatment plants and rivers. Our results also indicated that 70% of the viral community was persistent in surface waters, whereas only 13% were persistent in the pore waters taken from the hyporheic zone. Finally, we predicted linkages between 73 viral genomes and 38 microbial genomes. These putatively linked hosts included members of the Competibacteraceae, which we suggest are potential contributors to river carbon and nitrogen cycling via denitrification and nitrogen fixation. Together, these findings demonstrate that members of the surface water microbiome from this urban river are stable over multiple diurnal cycles. These temporal insights raise important considerations for ecosystem models attempting to constrain dynamics of river biogeochemical cycles.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

New-generation geostationary satellite reveals widespread midday depression in dryland photosynthesis during 2020 western U.S. heatwave

Emerging new-generation geostationary satellites have broadened the scope for studying the diurnal cycle of ecosystem functions. We exploit observations from the Geostationary Operational Environmental Satellite-R series to examine the effect of a severe U.S. heatwave in 2020 on the diurnal variations of ecosystem photosynthesis. We find divergent responses of photosynthesis to the heatwave across vegetation types and aridity gradients, with drylands exhibiting widespread midday and afternoon depression in photosynthesis. The diurnal centroid and peak time of dryland gross primary production (GPP) substantially shift toward earlier morning times, reflecting notable water and heat stress. Our geostationary satellite-based method outperforms traditional radiation-based upscaling methods from polar-orbiting satellite snapshots in estimating daily GPP and GPP loss during heatwaves. These findings underscore the potential of geostationary satellites for diurnal photosynthesis monitoring and highlight the necessity to consider the increased diurnal asymmetry in GPP under stress when evaluating carbon-climate interactions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Influence of Realistic, Cyclic Atmospheric Cycles on the Pitting Corrosion of Austenitic Stainless Steels

Pitting corrosion was evaluated on stainless steels 304H, 304, and 316L the surfaces of which had ASTM seawater printed on them as a function of surface roughness after exposure to an exemplar realistic atmospheric diurnal cycle for up to one year. Methods to evaluate pitting damage included optical imaging, scanning electron microscopy imaging, profilometry analysis, and polarization scans. The developed cyclic exposure environment did not significantly influence pitting morphology nor depth in comparison to prior static exposure environments. Cross-hatching was observed in a majority of pits for all material compositions with the roughest surface finish (#4 finish) and in all surface finishes for the 304H composition. Evidence is provided that cross-hatched pit morphologies are caused by slip bands produced during the grinding process for the #4 finish or by material processing. Additionally, micro-cracking was observed in pits formed on samples with the #4 surface finish and was greatly reduced or absent for pits formed on samples with smooth surface finishes. This suggests that both a low RH leading to an MgCl 2 -dominated environment and a rough surface containing significant residual stress are necessary for micro-cracking. Finally, the use of various characterization techniques and cross sectioning was employed to both qualitatively and quantitatively assess pitting damage across all SS compositions and surface finishes.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Considerations for realistic atmospheric environments: An application to corrosion testing

Measured salt compositions in dust collected over roughly the last decade from surfaces of in-service stainless-steel alloys at four locations around the United States are presented, along with the predicted brine compositions that would result from deliquescence of these salts. The salt compositions vary greatly from ASTM seawater and from laboratory salts (i.e., NaCl or MgCl 2 ) commonly used on corrosion testing. The salts contained relatively high amounts of sulfates and nitrates, evolved to basic pH values, and exhibited deliquescence relative humidity values (RH) higher than seawater. Additionally, inert dust in components were quantified and considerations for laboratory testing are presented. The observed dust compositions are discussed in terms of the potential corrosion behavior and are compared to commonly used accelerated testing protocols. Finally, ambient weather conditions and their influence on diurnal fluctuations in temperature (T) and RH on heated metal surfaces are evaluated and a relevant diurnal cycle for laboratory testing a heated surface has been developed. Suggestions for future accelerated tests are proposed that include exploration of the effects of inert dust particles on atmospheric corrosion, chemistry considerations, and realistic diurnal fluctuations in T and RH. Understanding mechanisms in both realistic and accelerated environments will allow development of a corrosion factor (i.e., scaling factor) for the extrapolation of laboratory-scale test results to real world applications.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Characterization of HRRR-simulated rotor layer wind speeds and clouds along the coast of California

Stratocumulus clouds, with their low cloud base and top, affect the atmospheric boundary layer wind and turbulence profile, thereby modulating wind energy resources. GOES satellite data reveal an abundance of stratocumulus clouds in the late spring and summer months off the coast of northern and central California, where there are active plans to deploy floating offshore wind farms at two lease areas (near Morro Bay and Humboldt). Since the fall of 2020, two buoys equipped with multiple instruments, including Doppler lidar, have been deployed for about 1 year in these wind farm lease areas to assess the rotor layer wind conditions in these locations. The objective of this study is to evaluate how well the High-Resolution Rapid Refresh (HRRR) model represents stratocumulus cloud characteristics and turbine-relevant rotor layer winds (surface to 300 m) by comparing HRRR simulations with buoy and satellite observations. We first find that the HRRR model reproduces the seasonal cycle of cloud top height reasonably well in these regions. However, during the warm season – especially at Morro Bay – the HRRR-simulated stratocumulus clouds tend to have lower tops by about 150 m and exhibit weaker diurnal cycles than satellite observations. Our analysis also shows that rotor layer wind speeds and vertical shear are stronger at Humboldt than at Morro Bay, and both are generally stronger under clear-sky conditions. Finally, the HRRR model bias in rotor layer wind speed is small under cloudy conditions but larger and dependent on observed wind speed under clear skies. Specifically, HRRR underestimates wind speeds at Morro Bay and overestimates them at Humboldt under clear-sky conditions.

17 WIND ENERGY↗
DOE OSTI2021

Mesoscale Convective Systems in a Superparameterized E3SM Simulation at High Resolution

Accurately representing mesoscale convective systems (MCSs) is crucial to simulating the energy and water cycles in global climate models. Using a novel MCS identification and tracking algorithm applied to observations and model simulations, we evaluate how well the Energy Exascale Earth System Model simulates MCSs over the central US. Simulations performed by E3SM at 25 km grid spacing with (SP-E3SM) and without (E3SM) superparameterization are compared and evaluated against observations using multiple metrics highlighting important MCS characteristics. Compared to E3SM, SP-E3SM better simulates MCS number and MCS precipitation amount, diurnal cycle, propagation, and the probability distribution of precipitation rate in both spring and summer. The improvement from SP is partly contributed by improvement in simulating the large-scale environments, featuring enhanced atmospheric low-level moisture and larger moisture transport to the central US relative to E3SM. However, SP-E3SM still underestimates MCS precipitation amount, particularly in summer. This underestimation is closely related to the negative bias in MCS precipitation intensity, although the drier environments simulated during summer also contributes to underestimation of MCS frequency. Without SP, the larger bias in MCS precipitation amount is closely related to the negative bias in MCS frequency, while the substantial dry bias in the large-scale environments also contributes to underestimation of MCS intensity. Our results suggest that SP improves MCS simulation by improving modeling of the large-scale environments and convection initiation, which are both major limiting factors in E3SM even at 25 km grid spacing where deep convection is represented by a cumulus parameterization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Effects of autumn diurnal freeze–thaw cycles on soil bacteria and greenhouse gases in the permafrost regions

Understanding the impacts of diurnal freeze–thaw cycles (DFTCs) on soil microorganisms and greenhouse gas emissions is crucial for assessing soil carbon and nitrogen cycles in the alpine ecosystems. However, relevant studies in the permafrost regions in the Qinghai-Tibet Plateau (QTP) are still lacking. In this study, we used high-throughput pyrosequencing and static chamber-gas chromatogram to study the changes in topsoil bacteria and fluxes of greenhouse gases, including carbon dioxide (CO 2 ), methane (CH 4 ), and nitrous oxide (N 2 O), during autumn DFTCs in the permafrost regions of the Shule River headwaters on the western part of Qilian Mountains, northeast margin of the QTP. The results showed that the bacterial communities contained a total of 35 phyla, 88 classes, 128 orders, 153 families, 176 genera, and 113 species. The dominant phyla were Proteobacteria , Acidobacteria , Actinobacteria , Chloroflexi , and Gemmatimonadetes . Two DFTCs led to a trend of increasing bacterial diversity and significant changes in the relative abundance of 17 known bacteria at the family, genus, and species levels. These were predominantly influenced by soil temperature, water content, and salinity. In addition, CO 2 flux significantly increased while CH 4 flux distinctly decreased, and N 2 O flux tended to increase after two DFTCs, with soil bacteria being the primary affecting variable. This study can provide a scientific insight into the impact of climate change on biogeochemical cycles of the QTP.

Lv, Zhenying↗
DOE OSTI2026

Can ERA5 Be Used to Study Mesoscale Convective System Climatological Characteristics?

Mesoscale convective systems (MCSs) produce more than half of tropical rainfall and are central to the global hydrologic cycle. As the climate warms, environments favorable for MCSs may become more common; however, limited observational records hamper understanding of how MCSs respond to variations and changes in their environments. Here, we evaluate how well MCSs are represented in ERA5, a widely used global high‐resolution reanalysis product. Using PyFLEXTRKR, which jointly tracks top‐of‐atmosphere infrared brightness temperature and surface precipitation, we identified MCSs in ERA5 and compared them with those identified in satellite observations using the same detection algorithm. This comparison analysis spans 2007–2020 using hourly data at 0.25° horizontal resolution focusing over the tropics. ERA5 reproduces observed brightness‐temperature statistics and captures the geographic distribution and seasonal and diurnal cycles of MCS cold cloud shields. However, ERA5 precipitation exhibits an intensity bias—too much light rain and too little heavy rain—which shifts the rain‐rate distribution and reduces the frequency of MCSs relative to observations. Within MCSs, ERA5 precipitation exhibits the same pattern of bias, yielding a systematic underestimation of MCS precipitation intensity. Consistent with these biases, ERA5 underestimates the contribution of MCS to tropical rainfall by 25%–34% in key regions. Overall, ERA5 is suitable for studying MCS cold cloud‐shield climatology and evolution, but precipitation‐based MCS characteristics (including event‐level precipitation features and the geospatial distribution of MCS precipitation) should be interpreted with caution. These findings clarify which aspects of MCS behavior are robustly represented in ERA5 for climatological applications.

mesoscale convection↗
DOE OSTI2021

Impact of a New Cloud Microphysics Parameterization on the Simulations of Mesoscale Convective Systems in E3SM

Abstract Mesoscale convective systems (MCSs) are one of the most climatically significant forms of convection because of their large role in water and energy cycles. The mesoscale features associated with MCS are difficult to represent in climate models because the relevant dynamics and physics are absent or poorly represented with coarse model resolution (∼100 km). Using a regionally refined model (RRM) with 0.25° grid spacing embedded in the Energy Exascale Earth System Model (E3SM), we explore the impact of cloud microphysics parameterizations on the simulation of precipitation, particularly MCS precipitation over the contiguous United States. The Predicted Particle Properties (P3) cloud microphysics scheme has been modified and implemented into E3SM to overcome the limitations of the default Morrison and Gettelman (MG2) scheme in which rimed precipitating ice particles (graupel/hail) are absent and frozen particles are artificially partitioned into cloud ice and snow. We show that P3 improves the simulation of precipitation statistics including frequency distribution compared with MG2 with a limited effect on the diurnal cycle. P3 predicts higher hourly rain rates, resulting in 20% more MCSs and a higher total MCS precipitation (4.4%) compared to MG2, agreeing better with observations. The improvements with P3 mainly result from improved representations of ice microphysics, which not only produces higher rain rates through melting but also leads to a stronger large‐scale ascending motion by releasing more latent heating. This study suggests that improving microphysics parameterization is important for simulating MCS precipitation as future climate model resolutions continue to increase.

54 ENVIRONMENTAL SCIENCES↗