Search NASASearch

SEARCH · Search NASA

Results for “electron density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Absolute electron density measurements in the equatorial ionosphere

Accurate measurement of the electron density profile and its variations is crucial to further progress in understanding the physics of the disturbed equatorial ionosphere. To accomplish this, a plasma frequency probe was included in the payload complement of two rockets flown during the Condor rocket campaign conducted from Peru in March 1983. This paper presents density profiles of the disturbed equatorial ionosphere from a night-time flight in which spread-F conditions were present and from a day-time flight during strong electrojet conditions. Results from both flights are in excellent agreement with simultaneous radar data in that the regions of highly disturbed plasma coincide with the radar signatures. The spread-F rocket penetrated a topside depletion during both the upleg and downleg. The electrojet measurements showed a profile peaking at 1.3 x 10 to the 5th per cu cm at 106 km, with large scale fluctuations having amplitudes of roughly 10 percent seen only in the upward gradient in electron density. This is in agreement with plasma instability theory. It is further shown that simultaneous measurements by fixed-bias Langmuir probes, when normalized at a single point to the altitude profile of electron density, are inadequate to correctly parameterize the observed enhancements and depletions.

Baker, K. D.

Electron Densities Near Io from Galileo Plasma Wave Observations

This paper presents an overview of electron densities obtained near Io from the Galileo plasma wave instrument during the first four flybys of Io. These flybys were Io, which was a downstream wake pass that occurred on December 7, 1995; I24, which was an upstream pass that occurred on October 11, 1999; I25, which was a south polar pass that occurred on November 26, 1999; and I27, which was an upstream pass that occurred on February 22, 2000. Two methods were used to measure the electron density. The first was based on the frequency of upper hybrid resonance emissions, and the second was based on the low-frequency cutoff of electromagnetic radiation at the electron plasma frequency. For three of the flybys, Io, I25, and I27, large density enhancements were observed near the closest approach to Io. The peak electron densities ranged from 2.1 to 6.8 x 10(exp 4) per cubic centimeters. These densities are consistent with previous radio occultation measurements of Io's ionosphere. No density enhancement was observed during the I24 flyby, most likely because the spacecraft trajectory passed too far upstream to penetrate Io's ionosphere. During two of the flybys, I25 and I27, abrupt step-like changes were observed at the outer boundaries of the region of enhanced electron density. Comparisons with magnetic field models and energetic particle measurements show that the abrupt density steps occur as the spacecraft penetrated the boundary of the Io flux tube, with the region of high plasma density on the inside of the flux tube. Most likely the enhanced electron density within the Io flux tube is associated with magnetic field lines that are frozen to Io by the high conductivity of Io's atmosphere, thereby enhancing the escape of plasma along the magnetic field lines that pass through Io's ionosphere.

Gurnett, D. A.

Total electron content and F-region electron density distribution near the magnetic equator in India

Total electron content derived from the group delay measurements of ATS-6 radio beacons received at Ootacamund (India) are compared with the electron-density vs height distributions derived from the ionosonde data of the nearby station Kodaikanal. The daily variation of equivalent vertical total electron content does not show the midday bite out which is so prominently present in the corresponding daily variation of the maximum F-region electron density. The topside electron content continues to increase from sunrise to a maximum value around 1500 LT, while the bottomside electron content reaches a maximum value around 0500 LT. Daily variations of these as well as other parameters, e.g. the vertical slab thickness, the bottomside semi-thickness, the height of the F2 peak have been also studied for a geomagnetically quiet and a disturbed day.

Rastogi, R. G.

Electron-radiation effects on the ac and dc electrical properties and unpaired electron densities of three aerospace polymers

The effects of gigarad-level total absorbed doses from 1-MeV electrons on the post-irradiation alternating-current (ac) and direct-current (dc) electrical properties and the unpaired electron densities have been studied for Kapton, Ultem, and Mylar. The unpaired electron densities (determined from electron paramagnetic resonance spectroscopy) and the dc electrical conductivities of the irradiated materials were monitored as functions of time following the exposures to determine their decay characteristics at room temperature. The elevated-temperature ac electrical dissipations of the Ultem and Mylar were affected by the radiation. The dc conductivity of the Kapton increased by five orders of magnitude, while the dc conductivities of the Ultem and Mylar increased by less than an order of magnitude, due to the radiation. The observed radiation-generated changes in the ac electrical dissipations are explained in terms of known radiation-generated changes in the molecular structures of the three materials. A preliminary model relating the dc electrical conductivity and the unpaired electron density in the Kapton is proposed.

Long, Sheila Ann T.

Global 3-D Ionospheric Electron Density Reanalysis Based on Multisource Data Assimilation

We report preliminary results of a global 3-D ionospheric electron density reanalysis demonstration study during 2002-2011 based on multisource data assimilation. The monthly global ionospheric electron density reanalysis has been done by assimilating the quiet days ionospheric data into a data assimilation model constructed using the International Reference Ionosphere (IRI) 2007 model and a Kalman filter technique. These data include global navigation satellite system (GNSS) observations of ionospheric total electron content (TEC) from ground-based stations, ionospheric radio occultations by CHAMP, GRACE, COSMIC, SAC-C, Metop-A, and the TerraSAR-X satellites, and Jason-1 and 2 altimeter TEC measurements. The output of the reanalysis are 3-D gridded ionospheric electron densities with temporal and spatial resolutions of 1 h in universal time, 5deg in latitude, 10deg in longitude, and approx.30 km in altitude. The climatological features of the reanalysis results, such as solar activity dependence, seasonal variations, and the global morphology of the ionosphere, agree well with those in the empirical models and observations. The global electron content derived from the international GNSS service global ionospheric maps, the observed electron density profiles from the Poker Flat Incoherent Scatter Radar during 2007-2010, and foF2 observed by the global ionosonde network during 2002-2011 are used to validate the reanalysis method. All comparisons show that the reanalysis have smaller deviations and biases than the IRI-2007 predictions. Especially after April 2006 when the six COSMIC satellites were launched, the reanalysis shows significant improvement over the IRI predictions. The obvious overestimation of the low-latitude ionospheric F region densities by the IRI model during the 23/24 solar minimum is corrected well by the reanalysis. The potential application and improvements of the reanalysis are also discussed.

Xinan Yue

Proportionality between Doppler noise and integrated signal path electron density validated by differenced S-X range

Observations of Viking differenced S-band/X-band (S-X) range are shown to correlate strongly with Viking Doppler noise. A ratio of proportionality between downlink S-band plasma-induced range error and two-way Doppler noise is calculated. A new parameter (similar to the parameter epsilon which defines the ratio of local electron density fluctuations to mean electron density) is defined as a function of observed data sample interval (Tau) where the time-scale of the observations is 15 Tau. This parameter is interpreted to yield the ratio of net observed phase (or electron density) fluctuations to integrated electron density (in RMS meters/meter). Using this parameter and the thin phase-changing screen approximation, a value for the scale size L is calculated. To be consistent with Doppler noise observations, it is seen necessary for L to be proportional to closest approach distance a, and a strong function of the observed data sample interval, and hence the time-scale of the observations.

Berman, A. L.

Variations in electron density in the middle latitude D-region above Urbana, Illinois

Electron density measurements made with the partial reflections technique above Urbana, Illinois (44 deg 10 min N, 88 deg 10 min W) were analyzed for day-to-day variations, seasonal variations, magnetic storm aftereffects, and stratosphere-ionosphere coupling effects. As well as showing a winter anomaly, the electron densities near 76 km were significantly lower in fall than in spring. Magnetic storm aftereffects of the type predicted by models of energetic electron precipitation at middle latitudes were observed. No strong correlations were found between stratospheric and D-region time series, or between the occurrence of stratospheric warmings and D-region changes. It is likely that most of the electron density variation was due to variations in the transport of minor neutral constituents. The spring-fall differences were also probably caused by differences in minor constituent concentrations rather than the effect of temperature changes on the recombination coefficient.

Wratt, D. S.

Polar cap electron densities from DE 1 plasma wave observations

Electric-field-spectum measurements from the plasma-wave instrument on the Dynamics Explorer 1 spacecraft are used to study the local electron density at high altitudes in the northern polar-cap region. The electron density is determined from the upper cutoff of whistler-mode radiation at the electron plasma frequency. Median density values over the polar cap at L greater than 10 are found to vary from 35.2 + or - 8.5 cu cm at 2.1 earth radii to 0.99 + or - 0.51 cu cm at 4.66 earth radii. The steady-state radial-outflow model is examined for consistency with the observed density profile. A power-law fit to the radial variation of the electron density yields an exponent of - 3.85 + or - 0.32, which for the radial-outflow model implies a flow velocity increasing nearly linearly with incresing radial distance. Comparison of the observed electron densities with theoretical polar-wind densities yields consistent results up to 2.8 earth radii. A comparison of the observed electron densities with low-altitude density profiles from the Alouette II and ISIS 1 spacecraft illustrates transitions in the slope of the profile at 1.16 earth radii and between 1.55 and 2.0 earth radii. The changes in the density profile suggest that changes occur in the basic radial-transport processes at these altitudes.

Persoon, A. M.

Predicted diurnal variations of electron density for three high-latitude incoherent scatter radars

A high-latitude ionospheric model is used to predict the diurnal variations of electron density which should be observed by the EISCAT, Chatanika, and Millstone Hill incorporated scatter facilities. The calculations take into account a strong convection model without substorms. The provided electron density predictions should be used to obtain an indication of the quantitative differences in measured electron density that are to be expected when the three radars probe the high-latitude ionosphere simultaneously. These differences vary with altitude, latitude, local time, and season, and are associated with the UT dependence of the high-latitude ionosphere which results from the offset between the geomagnetic and geographic poles. It was found that the three facilities should observe the greatest difference in electron density variations in winter.

Sojka, J. J.

Validation of Spherically Symmetric Inversion by Use of a Tomographically Reconstructed Three-Dimensional Electron Density of the Solar Corona

Determining the coronal electron density by the inversion of white-light polarized brightness (pB) measurements by coronagraphs is a classic problem in solar physics. An inversion technique based on the spherically symmetric geometry (spherically symmetric inversion, SSI) was developed in the 1950s and has been widely applied to interpret various observations. However, to date there is no study of the uncertainty estimation of this method. We here present the detailed assessment of this method using a three-dimensional (3D) electron density in the corona from 1.5 to 4 solar radius as a model, which is reconstructed by a tomography method from STEREO/COR1 observations during the solar minimum in February 2008 (Carrington Rotation, CR 2066).We first show in theory and observation that the spherically symmetric polynomial approximation (SSPA) method and the Van de Hulst inversion technique are equivalent. Then we assess the SSPA method using synthesized pB images from the 3D density model, and find that the SSPA density values are close to the model inputs for the streamer core near the plane of the sky (POS) with differences generally smaller than about a factor of two; the former has the lower peak but extends more in both longitudinal and latitudinal directions than the latter. We estimate that the SSPA method may resolve the coronal density structure near the POS with angular resolution in longitude of about 50 deg. Our results confirm the suggestion that the SSI method is applicable to the solar minimum streamer (belt), as stated in some previous studies. In addition, we demonstrate that the SSPA method can be used to reconstruct the 3D coronal density, roughly in agreement with the reconstruction by tomography for a period of low solar activity (CR 2066). We suggest that the SSI method is complementary to the 3D tomographic technique in some cases, given that the development of the latter is still an ongoing research effort.

corona

High-Altitude High-Latitude Electron-Density and Magnetic-Field Enhancements Observed during Magnetic Storms - Including the Storm of 17 April 2002

In addition to the spectacular remote measurements from the Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) satellite [Burch, Space Sci. Rev., 2003], the Radio Plasma Imager (RPI) on IMAGE had the capability of making accurate magnetospheric local electron-density and magnetic-field determinations in addition to obtaining remote electron-density profiles [Reinisch et al., GRL, 2001; Benson et al., JGR, 2003]. These determinations were made using interleaved passive and active modes of operation of the RPI; the former were used to produce dynamic spectra and the latter to produce plasmagrams during active sounding. The plasmagrams of particular interest in this investigation were produced during the apogee (8 RE) portion of the IMAGE orbit when the RPI often operated in a high-resolution mode (300 Hz frequency steps) designed for accurate frequency measurements of sounder-stimulated plasma resonances. Here we present examples from 2001 and 2002, when the IMAGE apogee was at high latitudes, of large increase the electron density and magnetic-field intensity (relative to quiet control conditions) during magnetic storms. During the 17 April 2002 storm, the electron density increased by about a factor of 4 and the magnetic-field intensity increased by nearly a factor of 2. During the much larger storm of 31 March 2001, the RPI data presented in Osherovich et al. [2007] indicates that the electron density increased by about a factor of 10.

Benson, Robert F.

Electron density distribution in the magnetosphere

Eight months of differential potential measurements from the POLAR satellite were used to study the electron density distribution in the magnetosphere and its dependence on the level of geomagnetic activity identified by the Kp index. The differential potential measurement is directly proportional to the electron density, and this technique can be used for detecting fast electron density variation in low-density plasmas with a good accuracy. The inner magnetospheric regions are particularly investigated in this study. The cusp is found to be denser during low Km, and it moves equator-ward with increasing Km. The plasmapause is quite asymmetric, as expected. In particular, on the nightside, the plasmapause is compressed closer to the earth with increasing Kp. While the density gradients at the dayside plasmapause are usually not very steep, they can be quite large at other time sectors. A particularly pronounced sharpening of the plasmapause occurs at the dusk sector with increasing Kp. The density in the region between the dayside plasmapause and magnetopause is relatively high during all Kp levels; the average densities are several electrons per cubic meter. During disturbed periods, the density in the near-earth plasma sheet near midnight increases and becomes higher than the densities towards the flanks of the plasma sheet.

Laakso, H.

Real-time reconstruction and control of pedestal-top electron density using RMP and gas puff at KSTAR

We report the experimental results of controlling the pedestal-top electron density by applying resonant magnetic perturbation (RMP) with in-vessel control coils and the main gas puff in the 2024-2025 KSTAR experimental campaign. The density is reconstructed using a parameterized $ψ_N$ grid and five channels of line-averaged density measured by the two-colored interferometer (TCI). The reconstruction procedure is accelerated by deploying a multi-layer perceptron to run in approximately 120 µ s and is sufficiently fast for real-time control. A proportional-integral controller was adopted, with the controller gains estimated from the system identification procedure. The experimental results demonstrate that the developed controller can follow a dynamic target while exclusively using both actuators. The absolute percentage errors between the electron density at $ψ_N$ = 0.89 and the target were approximately 1.5% median and a 2.5% average, respectively. The developed controller can even lower the density by using the pump-out mechanism under RMP, and it can follow a more dynamic range of density targets than a single actuator controller. The developed controller will enable experimental scenario exploration within a shot by dynamically setting the density target or maintaining a constant electron density within a discharge.

EFIT

Electron density depletions in the nightside auroral zone

Dynamics Explorer 1 measurements are used to investigate regions of low electron density in the nightside auroral zone. Sharply defined regions of low electron density are found in auroral zone crossings from the predusk hours until the early morning hours at all radial distances up to at least 4.6 earth radii. Densities in the auroral cavity are shown to fall to values below 0.3/cu cm. Within the auroral cavity, electron-density-profile variations of a factor of 2 or more on spatial scales of tens of kilometers are found, and the electron plasma frequency to electron cyclotron frequency ratios are 0.02-0.4. The results suggest associations between the density depletions in the nightside auroral zone and auroral acceleration processes.

Persoon, A. M.