Independent Electron and Ion Energy Distribution Control for Semiconductor Processing Phase I Final Technical Report
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Resonance absorption (RA) occurs when a p-polarized electromagnetic wave, obliquely incident on an inhomogeneous plasma, tunnels past its turning point and resonantly excites an electron plasma wave (EPW) at the critical density. This phenomenon is important, for instance, in the direct drive approach to inertial fusion energy and is a particular example of a wider phenomenon in plasma physics known as mode conversion, which is crucial for heating magnetic fusion devices, such as tokamaks, via RF heating. Direct measurement of these RA-generated EPW accelerated hot electrons, with energy in the range of a few tens to a few hundreds of keV, is a challenging task due to the relatively low deflecting magnetic fields needed. The solution described here is a magnetic electron spectrometer (MES) with a continually changing magnetic field, lower at the entrance of the MES and gradually increasing toward the end, that enables the measurement of a wide spectral range of electrons with energies between 50 and 460 keV. Electron spectra taken in a LaserNetUS RA experiment were acquired from plasmas generated by irradiating polymer targets with the combination of an ~300 ps pulse followed by a series of ten high intensity 50–200 fs duration laser pulses from the ALEPH laser at Colorado State University. In conclusion, the high intensity beam is designed as spike trains of uneven duration and delay pulses in order to modify the RA phenomenon.
Abstract not provided.
Energy conversion from high power lasers to energetic hot electrons is a fundamental phenomenon in laser-plasma interactions. At laser intensities above a few times 10 14 W/cm 2 , nonlinear laser-plasma interactions lead to the generation of hot electrons with a broad energy distribution at typical temperatures of 10’s – 100’s kilo-electron-volt (keV). The fraction of laser energy transferred to hot electrons, their energy distribution and energy coupling efficiency to the targets are strongly affected by the laser intensity, wavelength and the plasma condition. Most investigations to date that are related to the fusion of high-energy-density laboratory plasmas (HEDLP) are carried out with relatively moderate laser intensity and lower laser wavelength to minimize hot electron generation, as electron preheating can degrade the fuel assembly. An alternative fusion scheme known as shock ignition (SI) has been proposed, requiring a high intensity spike pulse at the end of a fuel assembly phase to generate a strong shock to ignite the fuel. An initial shock pressure of 0.3 Gbar is required for ignition-scale targets using the SI scheme, requiring a relatively high on-target laser intensity of 5-10X10 15 W/cm 2 for the spike pulse. At such intensities, copious hot electrons can be produced by laser-plasma-instabilities (LPI), e.g., Stimulated Raman Scattering (SRS) and Two-Plasmon Decay (TPD). While very energetic electrons (>200 keV) could preheat the fuel, electrons with moderate energies may actually be beneficial for the SI scheme. Electrons in the 50-100 keV range can be stopped in the compressed high-density outer ablator layer leading to an increase in the ignitor shock strength and therefore enhancing overall efficiency in the SI scheme. Considering this importance of total energy and temperature of hot electrons, it is necessary to understand the LPI in the SI high intensity regime. Characterizing the hot electron source and energy coupling is key to investigating the viability of the SI concept. The overall goal of the HEDLP award was to perform a detailed study of the scaling of hot electron generation and energy coupling on high power laser systems, with intensity, wavelength, and target ablator material relevant to the nonlinear laser-plasma interaction at SI relevant conditions. This was a collaborative project between the Center for Energy Research at the University of California, San Diego (UCSD) and General Atomics. The experiment was performed at the Omega Laser Facility at the Laboratory for Laser Energetics (LLE) in the University of Rochester. Specific objectives of the work were to: understand the basic physics of laser-plasma interactions and instabilities at high laser intensities (up to 10 17 W/cm 2 ) and the effects of low-Z ablator materials and laser wavelengths (IR pulse at 1.054 µm versus UV pulse at 0.351 µm) and intensity scaling, fully characterize the resultant hot electron energy distribution, validate hot electron energy deposition via collisional and kinetic processes in the target and the induced shocks in support of electron-assisted SI concept.
Minority relativistic electron populations can occur in a range of complex plasmas. Of specific interest is when runaway electrons form among the presence of high-atomic-number ion species in a tokamak plasma discharge. It has been recently demonstrated that ion charge state distributions and radiation losses at low bulk electron temperatures can be dominated by relativistic electrons, even though their density is orders of magnitude lower. Furthermore, this was attributed to the relativistic enhancement of electron impact inelastic cross sections. In this work, we provide a closer inspection of the atomic physics underpinning this effect. We also demonstrate the consequences of runaway enhanced scattering on post-disruption tokamak fusion discharges with neon and argon impurities present. Effects on charge state distributions, radiation and spectral characteristics, and reduced-order modeling considerations are discussed.
A new Boltzmann-CSD solver has been developed within the SCEPTRE radiation-transport code, based on the 1st-order form of the transport equation, using discontinuous finite elements in space and energy and discrete ordinates in angle. The Boltzmann-CSD solver has been validated against experimental data for electron energy deposition distributions and for electron emission spectra. Comparison of the calculated results with experimental data shows excellent agreement for many of the test configurations and reasonable agreement for other test configurations. The tests have also been modeled with the ITS Monte Carlo code, which also shows excellent to reasonable agreement with the SCEPTRE results and experimental data. The SCEPTRE Boltzmann-CSD solver relies on electron cross sections generated by the legacy CEPXS code, which currently is limited to electron-only Boltzmann-CSD cross sections. Performing full electron-photon radiation transport with the Boltzmann-CSD solver will require further development in the cross section generating code. For the energy- deposition calculations, neglecting photon transport results in at most about 5% overprediction of the energy deposition for high-energy electrons on high-Z targets, and relatively insignificant difference for the other test configurations.
Similarity transformations are essential for correlating discharges at different scales, which are mostly utilized with local field or local energy approximations. In this work, we report the fully kinetic results from particle-in-cell/Monte Carlo collision simulations that unambiguously demonstrate the similarity of radio frequency (rf) discharges in nonlocal regimes where the electron energy relaxation length is much larger than the gap dimension. It is found that at a constant rf voltage amplitude, discharges will be similar if the gas pressure, inverse of gap distance, and rf driving frequency are all changed by the same scaling factor. The scaling relations of fundamental parameters are illustrated for rf discharges in the alpha-mode with secondary electron emission ignored, and the temporal electron kinetics are shown to have invariance in similar discharges. The results explicitly validate the scaling laws in nonlocal kinetic regimes, indicating promising application potentials of the similarity transformations across a wide range of kinetic regimes.
We describe a method to reduce vacuum ultraviolet (VUV) pulse pileup (PPU) in x-ray pulse-height Silicon Drift Detector (SDD) signals. An Amptek FAST SDD, with C1 (Si 3 N 4 ) window, measures bremsstrahlung emitted from PFRC-2 plasma to extract the electron temperature (T e ) and density (n e ). The C1 window has low transmissivity for photons with energy below 200 eV though will transmit some VUV and soft x-ray photons, which PFRC-2 plasmas abundantly emit. Multi-VUV-photon PPU contaminates the interpretation of x rays with energy > 100 eV, particularly in a low-energy exponential tail. The predicted low transmissivity of ~1 μm thick Mylar [polyethylene terephthalate (PET)] to photons of energy <100 eV led to the selection of Mylar as the candidate filter to reduce VUV PPU. Experiments were conducted on an x-ray tube with a graphite target and on a quasi-Maxwellian tenuous plasma (n e ~ 10 9 cm –3 ) with effective temperatures reaching 1500 eV. A Mylar filter thickness of 850 nm is consistent with the results. The Mylar-filter-equipped SDD was then used on the PFRC-2 plasma, showing a substantial reduction in the low-energy x-ray signal, supporting our hypothesis of the importance of VUV PPU. Here, we describe the modeling and experiments performed to characterize the effect of the Mylar filter on SDD measurements.
Electron beam (e-beam) generated plasmas with applied crossed electric and magnetic (E×B) fields are promising for low-damage material processing. However, these plasmas can be subject to the formation of azimuthally propagating structures that enhance the radial transport of energetic charged species, which can harm the gentle processing capability of the plasma. In this work, we investigate the azimuthal structure formation in an e-beam generated E×B plasma using experimental diagnostics and 2D3V particle-in-cell simulations. Our findings demonstrate the formation of multiple simultaneously occurring azimuthally propagating modes that exhibit nontrivial radial dependence. It is suggested that the multimodal azimuthal spectrum is caused in part by the radial outflow of ions in the plasma.
Engineering the energy distribution of electronic defects in semiconductors can afford the coexistence of degenerate and nondegenerate transport behavior. By leveraging native defects in Cu 2 Se and CuGaSe 2 phases, the tunability of the concentration and energy distribution of active electronic defects in hierarchical (1-x)Cu 2 Se-(x)CuGaSe 2 composites is demonstrated. This study found that the electrical conductivity of various composites decreases with rising temperature indicating degenerate semiconducting behavior, whereas the carrier density increases with temperature, which is consistent with non-degenerate semiconductivity. Remarkably, this study found that while the carrier density and electrical conductivity drop with the increasing CuGaSe 2 content for samples with x ≤ 0.45 is consistent with an increase in the activation energy of “active” electronic defects, the sudden increase by 140% in the electrical conductivity and by 109% in the carrier density for near equimolar composition suggests the formation of a large density of electronic defects with lower activation energy. This unusual behavior is understood within the context of the hybridization of coexisting native electronic defects to form degenerate hybrid acceptor states with lower activation energy. The reported unique electronic transport can be leveraged for the development of more versatile electronic and optoelectronic devices with superior performance.
Obtaining statistical distributions by sampling a large number of conformations is vital for an accurate description of temperature-dependent properties of chemical systems. However, constructing distributions with 105??106 samples is computationally challenging because of the prohibitively high computational cost of performing rst-principles quantum-mechanical calculations. In this work, we present a new technique called the Eective Stochastic Potential Conguration Interaction Singles (ESP-CIS) method to obtain excitation energies. The ESP-CIS method uses random matrix theory for the construction of an eective stochastic representation of the Fock operator and combines it with linear-response theory. Here, we perform excitation calculations on PbS quantum dots (0.75-1.75 nm) at temperatures of 200-400 K. Results from a total of 15 million excitation energy calculations (1 million samples for each of the three dots at ve dierent temperatures) revealed the distributions to be sub-Gaussian in nature with negative skewness. The distributions progressively became red-shifted with increasing temperature. The study shows that random distortions in structure from the minimum-energy geometry of these quantum dots are more likely to lower the excitation energies.
Having previously reported on bunching via echo-enabled harmonic generation (EEHG) as an effective way to improve the longitudinal coherence in the NSLS-II storage ring [X. Yang et al., Sci. Rep. 12, 9437 (2022)], we demonstrate that this EEHG scheme can be easily adopted to any fourth generation diffraction-limited synchrotron light source with significant benefits. The advantage of the scheme is that it requires no change of the lattice and is fully compatible with other beamlines. Since the EEHG performance is mainly determined by the momentum compaction, beam emittances, and beta functions of a SR lattice, we have identified these crucial parameters and successfully built a generalized model, which can predict the performance of nearly any SLS. Regarding the fourth generation SLSs, momentum compactions are often significantly smaller; thus, to cover the x rays with a photon energy of up to 1 keV, we utilize a specific design, including a 250 nm seed-laser wavelength. Our model predicts that for most of the current and future fourth generation SLSs, the EEHG scheme can produce significant prebunching up to harmonic 200 and, thus, generate a few MW scale peak power at 1.25 nm wavelength.
Upcoming advancements in computed tomography architectures warrants the investigation of new X-ray source designs and the impacts that electron backscatter can have on these designs. One such design being investigated is a distributed, cylindrical anode-based X-ray source. For such a distributed X-ray source, we developed a modeling pipeline for simulating electron optics and transport to characterize the quality of the primary X-ray beam and the electron backscatter behavior. We report our results on the energy distributions of the bremsstrahlung spectra; electron backscatter ratio; and spatial, temporal, and energy distributions of backscattered electrons that return to the anode.
We develop a theoretical framework to interpret “bump-like” enhancements in the energy distribution of electrons emitted from cesium atoms subjected to intense infrared laser fields, as observed in a recent experiment. These emissions, detected at energies approaching twice the ponderomotive energy (2𝑈 p ), indicate a mechanism where electrons are nonadiabatically ejected with substantial inward velocity following ionization. The bump-like features arise from returning trajectories that scatter off the residual ion. We interpret these experimental results classically using a periodically driven version of the Bohr model and quantum mechanically through Keldysh's adiabaticity parameter (𝛾 K ) and Reiss's continuum-state intensity parameter 𝒵 in a Coulomb-corrected version of the strong-field approximation (SFA) that incorporates “complex” electronic trajectories. Notably, our theoretical analysis shows that these emissions are independent of the specific short-range form of the atomic potential.
Here, we applied reaction microscopy to elucidate fast non-adiabatic dissociation dynamics of deuterated water molecules after direct photo-double ionization at 61 eV with synchrotron radiation. For the very rare D + + O + + D breakup channel, the particle momenta, angular, and energy distributions of electrons and ions, measured in coincidence, reveal distinct electronic dication states and their dissociation pathways via spin–orbit coupling and charge transfer at crossings and seams on the potential energy surfaces. Notably, we could distinguish between direct and fast sequential dissociation scenarios. For the latter case, our measurements reveal the geometry and orientation of the deuterated water molecule with respect to the polarization vector that leads to this rare 3-body molecular breakup channel. Aided by multi-reference configuration-interaction calculations, the dissociation dynamics could be traced on the relevant potential energy surfaces and particularly their crossings and seams. This approach also unraveled the ultrafast time scales governing these processes.
Scalable electronic predictions are critical for soft materials design. Recently, the Electronic Coarse-Graining (ECG) method was introduced to renormalize all-atom quantum chemical (QC) predictions to coarse-grained (CG) resolutions using deep neural networks (DNNs). While DNNs can learn complex representations that prove challenging for kernel-based methods, they are susceptible to overfitting and the overconfidence of uncertainty estimations. Here, we develop ECG within a GPU-accelerated Deep Kernel Learning (DKL) framework to enable CG QC predictions using range-separated hybrid density functional theory (DFT), obtaining a 107 speedup relative to naive all-atom QC. By treating the predicted electronic properties as random Gaussian Processes, DKL incorporates CG mapping degeneracy by learning the distribution of electronic energies as a function of CG configuration. DKL-ECG accurately reproduces molecular orbital energies from range-separated DFT while facilitating efficient training via active learning using the uncertainties provided by DKL. Further, we show that while active learning algorithms enable efficient sampling of a more diverse configurational space relative to random sampling, all explored query methods exhibit comparable performance for the examined system. We attribute this result to the significant overlap of the feature space and output property distributions across multiple temperatures.
Like many areas in research and development, power electronic and distributed energy resource research and development slowed during the COVID pandemic. While the presence of the virus has reduced and workers are returning to shared offices, uncertainty of potential future challenges are still present. This work proposes a development and testing network that provides researchers the ability to operate remotely and coordinate control and debug activities for power electronic systems. This development and testing network has been demonstrated in both controller hardware-in-the-loop (C-HIL) and hardware testing.
We describe a mechanism by which the aberration content of a focused, multiterawatt laser is imprinted upon the forward angular distribution of electrons ionized within and ponderomotively expelled from the focal volume. In our experiments, the laser aberration type and magnitude are controllably varied, and the measured electron distributions are correspondingly modified in a way consistent with predictions from numerical simulations. This imprint mechanism shows potential for enabling the development of accurate focal-spot characterization of intense lasers when fired at full power and is being developed for extension to petawatt laser systems.