Search NASA⌕ Search

SEARCH · Search NASA

Results for “energy code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Implementing Badhwar-O'Neill Galactic Cosmic Ray Model for the Analysis of Space Radiation Exposure

For the analysis of radiation risks to astronauts and planning exploratory space missions, accurate energy spectrum of galactic cosmic radiation (GCR) is necessary. Characterization of the ionizing radiation environment is challenging because the interplanetary plasma and radiation fields are modulated by solar disturbances and the radiation doses received by astronauts in interplanetary space are likewise influenced. A model of the Badhwar‐O'Neill 2011 (BO11) GCR environment, which is represented by GCR deceleration potential theta, has been derived by utilizing all of the GCR measurements from balloons, satellites, and the newer NASA Advanced Composition Explorer (ACE). In the BO11 model, the solar modulation level is derived from the mean international sunspot numbers with time‐delay, which has been calibrated with actual flight instrument measurements to produce better GCR flux data fit during solar minima. GCR fluxes provided by the BO11 model were compared with various spacecraft measurements at 1 AU, and further comparisons were made for the tissue equivalent proportional counters measurements at low Earth orbits using the high‐charge and energy transport (HZETRN) code and various GCR models. For the comparison of the absorbed dose and dose equivalent calculations with the measurements by Radiation Assessment Detector (RAD) at Gale crater on Mars, the intensities and energies of GCR entering the heliosphere were calculated by using the BO11 model, which accounts for time‐dependent attenuation of the local interstellar spectrum of each element. The BO11 model, which has emphasized for the last 24 solar minima, showed in relatively good agreement with the RAD data for the first 200 sols, but it was resulted in to be less well during near the solar maximum of solar cycle 24 due to subtleties in the changing heliospheric conditions. By performing the error analysis of the BO11 model and the optimization in reducing overall uncertainty, the resultant BO13 model corrects the fit at solar maxima as well as being accurate at solar minima. The BO13 model is implemented to the NASA Space Cancer Risk model for the assessment of radiation risks. Overall cumulative probability distribution of solar modulation parameters represents the percentile rank of the average interplanetary GCR environment, and the probabilistic radiation risks can be assessed for various levels of GCR environment to support mission design and operational planning for future manned space exploration missions.

Kim, Myung-Hee Y.↗
NASA NTRS1980

Application of a reversible chemical reaction system to solar thermal power plants

Three distributed dish solar thermal power systems using various applications of SO2/SO3 chemical energy storage and transport technology were comparatively assessed. Each system features various roles for the chemical system: (1) energy storage only, (2) energy transport, or (3) energy transport and storage. These three systems were also compared with the dish-Stirling, using electrical transport and battery storage, and the central receiver Rankine system, with thermal storage, to determine the relative merit of plants employing a thermochemical system. As an assessment criterion, the busbar energy costs were compared. Separate but comparable solar energy cost computer codes were used for distributed receiver and central receiver systems. Calculations were performed for capacity factors ranging from 0.4 to 0.8. The results indicate that SO2/SO3 technology has the potential to be more cost effective in transporting the collected energy than in storing the energy for the storage capacity range studied (2-15 hours)

Hanseth, E. J.↗
NASA NTRSDate not supplied

DDFRG: Double Differential FRaGmentation Models for Proton and Light Ion Production in High Energy Nuclear Collisions: Closed Form, Analytic Formulas for Transport Codes and other Applications

New models for Double-Differential FRaGmentation (DDFRG) cross sections for proton and light ion production from high energy nucleus-nucleus collisions are developed. The proton model employs thermal production from the projectile, central fireball and target sources, and also quasi-elastic direct knockout production. Light ion production cross sections employ a hybrid coalescence model. The models are able to describe a wide range of experimental data with only a limited set of model parameters. Closed form analytic formulas for double-differential cross sections as well as single-differential energy cross sections are developed. The analytic formulas enable highly efficient computation for space radiation transport codes and other applications.

John W Norbury↗
NASA NTRS1989

Development of a numerical solution to the time dependent kinetic equation

A numerical solution was developed for the time dependent Fokker-Planck equation for arbitrary distributions of electrons injected into a magnetized plasma. The code which includes energy loss and pitch angle scattering due to Coulomb collisions and changes in pitch angle due to inhomogeneous magnetic fields was calibrated and tested. The numerical method is versatile so that other scattering or radiation terms can be easily included. Using this code many processes associated with the impulsive phase of solar flares will be investigated.

Hamilton, Russell J.↗
NASA NTRS1999

Crashworthy Evaluation of a 1/5-Scale Model Composite Fuselage Concept

A 1/5-scale model composite fuselage concept for light aircraft and rotorcraft has been developed to satisfy structural and flight loads requirements and to satisfy design goals for improved crashworthiness. The 1/5-scale model fuselage consists of a relatively rigid upper section which forms the passenger cabin, a stiff structural floor, and an energy absorbing subfloor which is designed to limit impact forces during a crash event. The focus of the present paper is to describe the crashworthy evaluation of the fuselage concept through impact testing and finite element simulation using the nonlinear, explicit transient dynamic code, MSC/DYTRAN. The energy absorption behavior of two different subfloor configurations was determined through quasi-static crushing tests. For the dynamic evaluation, each subfloor configuration was incorporated into a 1/5-scale model fuselage section, which was impacted at 31 ft/s vertical velocity onto a rigid surface. The experimental data demonstrate that the fuselage section with a foam-filled subfloor configuration satisfied the impact design requirement. In addition, the fuselage section maintained excellent energy absorption behavior for a 31 ft/s vertical drop test with a 15 deg-roll impact attitude. Good correlation was obtained between the experimental data and analytical results for both impact conditions.

Jackson, Karen E.↗
NASA NTRS2003

Coupled receiver-decoders for low rate turbo codes

We present a rate 1/31 turbo code that achieves a bit error rate of 10(sup -6) at Eb/No = -0.9 db. At this coding gain, insufficient energy per symbol is present for a conventional receiver to recover the carrier phase properly. We present a method to overcome this problem by coupling the receiver and decoder functions.

turbo codes receivers↗
NASA NTRS2008

Pion and Kaon Lab Frame Differential Cross Sections for Intermediate Energy Nucleus-Nucleus Collisions

Space radiation transport codes require accurate models for hadron production in intermediate energy nucleus-nucleus collisions. Codes require cross sections to be written in terms of lab frame variables and it is important to be able to verify models against experimental data in the lab frame. Several models are compared to lab frame data. It is found that models based on algebraic parameterizations are unable to describe intermediate energy differential cross section data. However, simple thermal model parameterizations, when appropriately transformed from the center of momentum to the lab frame, are able to account for the data.

Norbury, John W.↗
NASA NTRS2024

Comparison of Geant4-DNA and RITRACKS/RITCARD: Microdosimetry, Nanodosimetry and DNA Damage Predictions for Low to High LET Ions

Low linear energy transfer (LET) ionizing radiations induce homogeneously distributed DNA damage at the cellular scale, while high LET ionizing radiations are well known to create complex biological damage including clustered double strand breaks (DSB). Clustered DSB are critical events that are difficult to repair, leading to increased biological outcomes compared to low LET radiation exposure. Recent studies have shown that DNA compaction, which can be actively modified by the cell to allow DNA repair, influences the yield of DSB [1]. The goal of this work is to determine the impact of DNA compaction on chromosome aberration formation, a biomarker of radiation-induced cancer risk. The RITRACKS track structure code [2], together with the RITCARD code [3], allow one to simulate the transport of high LET ions, calculate DNA damage and repair, and chromosome aberration formation, but does not include detailed geometrical models of DNA. The Geant4-DNA toolkit provides such detailed models with different levels of DNA compaction [1,4], but does not model chromosome aberration formation. In this work, these highly detailed DNA geometries are used to compute DNA breaks with Geant4-DNA and combine the results with the RITCARD tool to compute chromosome aberrations. As a first step, we compared the transport models used in RITRACKS and Geant4-DNA and newly released heavy ion model transport (G4DNARuddIonisationExtendedModel Geant4 v11.2) to ensure consistency between the physical stage of the two radiation transport codes. We compared energy deposition at the micrometric and nanometric scales for different ions (H 250 MeV, H 150 Me, He 250 MeV/n, C 290 MeV/n, O 350 MeV/n, O 55 MeV/n, Si 170MeV/n, Ti 300 MeV/n, Ti 300 MeV/n, Fe 600 MeV/n, Fe 450 MeV/n and Fe 300 MeV/n) with LET ranging from ~0.4 keV/μm up to 235 keV/μm. Excellent agreement is found for both microdosimetric and nanodosimetric spectra for all ion types and energies. The calculation of DNA breaks and their complexity with the Geant4-DNA is an ongoing work, and comparison with RITCARD will be presented based on result availability at the time of the conference. [1] Tang et al. (2019). Med. Phys., 46(3), 1501-1511. [2] Plante et al. (2008). NJP, 10(12), 125020. [3] Plante et al. (2019). Rad. Res., 192(3), 282-298. [4] Incerti et al. (2018). Med. Phys., 45(8), e722-e739.

Floriane Poignant↗
NASA NTRS1974

Calculations of the early evolution of Jupiter

The evolution of the protoplanet Jupiter is followed, using a hydrodynamic computer code with radiative energy transport. Jupiter is assumed to have formed as a subcondensation in the primitive solar nebula at a density just high enough for gravitational collapse to occur. The initial state has a density of 0.0015 nanograms per cu cm and a temperature of 43 K; the calculations are carried to an equilibrium state where the central density reaches 0.5 g per cu cm and the central temperature reaches 25,000 K. During the early part of the evolution the object contracts in quasi-hydrostatic equilibrium; later on hydrodynamic collapse occurs, induced by the dissociation of hydrogen molecules. After dissociation is complete, the planet regains hydrostatic equilibrium with a radius of a few times the present value. Further evolution beyond this point is not treated here; however the results are consistent with the existence of a high-luminosity phase shortly after the planet settles into its final quasi-static contraction.-

Bodenheimer, P.↗
NASA NTRS1986

Overview of the new ASME Performance Test Code for wind turbines

The principal technical features of the ASME Performance Test Code for wind turbines are presented and such issues as what sizes and types of wind turbines should be included, what the principal measure of performance should be, and how wind speed should be measured are discussed. It is concluded that the present test code is applicable to wind turbine systems of all sizes. The principal measure of performance as defined by this code is net energy output and the primary performance parameter is the 'test energy ratio' which is based on a comparison between the measured and predicted energy output for the test period.

Spera, David A.↗
NASA NTRS1992

Acoustic fill factors for a 120 inch diameter fairing

Data from the acoustic test of a 120-inch diameter payload fairing were collected and an analysis of acoustic fill factors were performed. Correction factors for obtaining a weighted spatial average of the interior sound pressure level (SPL) were derived based on this database and a normalized 200-inch diameter fairing database. The weighted fill factors were determined and compared with statistical energy analysis (VAPEPS code) derived fill factors. The comparison is found to be reasonable.

Lee, Y. Albert↗
NASA NTRS1993

Al-26 production profile and model comparisons in Canyon Diablo

The large preatmospheric size of the Canyon Diablo meteorite, a radius of about 15 m, makes it especially suitable for systematic studies of cosmogenic nuclide production rates of iron objects in a 2 pi geometry. To reconstruct the exposure history of the meteoroid, Heymann et al. investigated several fragments recovered from known geographic locations around the crater for their shock features and cosmogenic nobel gases. They applied the Signer-Nier noble gas production rate model to establish the preatmospheric depth of the specimens in the meteoroid. Cosmic ray exposure ages suggested a multi-episodic irradiation, with 170 or 540 Ma being inferred for most of the samples studied while two anomalous specimens indicated a possible third exposure age at 940 Ma. Be-10 and Cl-36 have been measured in a number of these same samples by accelerator mass spectrometry (AMS), with use being made of the preatmospheric depths determined in Heymann et al. to construct production profiles. The present study extends the cosmogenic radionuclide data to Al-26 and compares the results with both the production rate model of Reedy and Arnold and production rates determined from the cross sections used by the Reedy-Arnold model (for the major nuclear reactions making Al-26) in combination with differential fluxes calculated using the Los Alamos High Energy Transport (LAHET) Code System. Model calculations for Be-10 and Cl-36 have also been obtained.

Michlovich, E.↗
NASA NTRS2003

Physics of the Isotopic Dependence of Galactic Cosmic Ray Fluence Behind Shielding

For over 25 years, NASA has supported the development of space radiation transport models for shielding applications. The NASA space radiation transport model now predicts dose and dose equivalent in Earth and Mars orbit to an accuracy of plus or minus 20%. However, because larger errors may occur in particle fluence predictions, there is interest in further assessments and improvements in NASA's space radiation transport model. In this paper, we consider the effects of the isotopic composition of the primary galactic cosmic rays (GCR) and the isotopic dependence of nuclear fragmentation cross-sections on the solution to transport models used for shielding studies. Satellite measurements are used to describe the isotopic composition of the GCR. Using NASA's quantum multiple-scattering theory of nuclear fragmentation (QMSFRG) and high-charge and energy (HZETRN) transport code, we study the effect of the isotopic dependence of the primary GCR composition and secondary nuclei on shielding calculations. The QMSFRG is shown to accurately describe the iso-spin dependence of nuclear fragmentation. The principal finding of this study is that large errors (plus or minus 100%) will occur in the mass-fluence spectra when comparing transport models that use a complete isotope grid (approximately 170 ions) to ones that use a reduced isotope grid, for example the 59 ion-grid used in the HZETRN code in the past, however less significant errors (less than 20%) occur in the elemental-fluence spectra. Because a complete isotope grid is readily handled on small computer workstations and is needed for several applications studying GCR propagation and scattering, it is recommended that they be used for future GCR studies.

Cucinotta, Francis A.↗
NASA NTRS2004

A space radiation shielding model of the Martian radiation environment experiment (MARIE)

The 2001 Mars Odyssey spacecraft was launched towards Mars on April 7, 2001. Onboard the spacecraft is the Martian radiation environment experiment (MARIE), which is designed to measure the background radiation environment due to galactic cosmic rays (GCR) and solar protons in the 20-500 MeV/n energy range. We present an approach for developing a space radiation-shielding model of the spacecraft that includes the MARIE instrument in the current mapping phase orientation. A discussion is presented describing the development and methodology used to construct the shielding model. For a given GCR model environment, using the current MARIE shielding model and the high-energy particle transport codes, dose rate values are compared with MARIE measurements during the early mapping phase in Mars orbit. The results show good agreement between the model calculations and the MARIE measurements as presented for the March 2002 dataset. c2003 COSPAR. Published by Elsevier Ltd. All rights reserved.

NASA Center JSC↗
NASA NTRS2006

Fracture Mechanics for Composites: State of the Art and Challenges

Interlaminar fracture mechanics has proven useful for characterizing the onset of delaminations in composites and has been used with limited success primarily to investigate onset in fracture toughness specimens and laboratory size coupon type specimens. Future acceptance of the methodology by industry and certification authorities however, requires the successful demonstration of the methodology on the structural level. In this paper, the state-of-the-art in fracture toughness characterization, and interlaminar fracture mechanics analysis tools are described. To demonstrate the application on the structural level, a panel was selected which is reinforced with stringers. Full implementation of interlaminar fracture mechanics in design however remains a challenge and requires a continuing development effort of codes to calculate energy release rates and advancements in delamination onset and growth criteria under mixed mode conditions.

Krueger, Ronald↗
NASA NTRS2006

Isotopic Dependence of GCR Fluence behind Shielding

In this paper we consider the effects of the isotopic composition of the primary galactic cosmic rays (GCR), nuclear fragmentation cross-sections, and isotopic-grid on the solution to transport models used for shielding studies. Satellite measurements are used to describe the isotopic composition of the GCR. For the nuclear interaction data-base and transport solution, we use the quantum multiple-scattering theory of nuclear fragmentation (QMSFRG) and high-charge and energy (HZETRN) transport code, respectively. The QMSFRG model is shown to accurately describe existing fragmentation data including proper description of the odd-even effects as function of the iso-spin dependence on the projectile nucleus. The principle finding of this study is that large errors (+/-100%) will occur in the mass-fluence spectra when comparing transport models that use a complete isotopic-grid (approx.170 ions) to ones that use a reduced isotopic-grid, for example the 59 ion-grid used in the HZETRN code in the past, however less significant errors (<+/-20%) occur in the elemental-fluence spectra. Because a complete isotopic-grid is readily handled on small computer workstations and is needed for several applications studying GCR propagation and scattering, it is recommended that they be used for future GCR studies.

Cucinotta, Francis A.↗
NASA NTRS2005

Magnetic Variations Associated With Solar Flares

A report summarizes an investigation of helioseismic waves and magnetic variations associated with solar flares, involving analysis of data acquired by the Michelson Doppler Imager (MDI) aboard the Solar and Heliocentric Observatory (SOHO) spacecraft, the Yohkoh spacecraft, and the Ramaty High Energy Solar Spectroscopic Imager (RHESSI) spacecraft. Reconstruction of x-ray flare images from RHESSI data and comparison of them with MDI magnetic maps were performed in an attempt to infer the changes in the geometry of the magnetic field. It was established that in most flares observed with MDI, downward propagating shocks were much weaker than was one observed in the July 9, 1996 flare, which caused a strong helioseismic response. It was concluded that most of the observed impulsive variations result from direct impact of high-energy particles. Computer codes were developed for further study of these phenomena.

Petrosian, Vahe↗
NASA NTRS2013

Mitigating the Effects of the Space Radiation Environment: A Novel Approach of Using Graded-Z Materials

In this paper we present a novel space radiation shielding approach using various material lay-ups, called "Graded-Z" shielding, which could optimize cost, weight, and safety while mitigating the radiation exposures from the trapped radiation and solar proton environments, as well as the galactic cosmic radiation (GCR) environment, to humans and electronics. In addition, a validation and verification (V&V) was performed using two different high energy particle transport/dose codes (MCNPX & HZETRN). Inherently, we know that materials having high-hydrogen content are very good space radiation shielding materials. Graded-Z material lay-ups are very good trapped electron mitigators for medium earth orbit (MEO) and geostationary earth orbit (GEO). In addition, secondary particles, namely neutrons, are produced as the primary particles penetrate a spacecraft, which can have deleterious effects to both humans and electronics. The use of "dopants," such as beryllium, boron, and lithium, impregnated in other shielding materials provides a means of absorbing the secondary neutrons. Several examples of optimized Graded-Z shielding layups that include the use of composite materials are presented and discussed in detail. This parametric shielding study is an extension of some earlier pioneering work we (William Atwell and Kristina Rojdev) performed in 20041 and 20092.

Atwell, William↗