SEARCH · Search NASA

Results for “ethanol fuel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Computational study on the impact of gasoline-ethanol blending on autoignition and soot/NO x emissions under low-load gasoline compression ignition conditions

Here, in the present work, computational fluid dynamics (CFD) simulations of a single-cylinder gasoline compression ignition (GCI) engine are performed to investigate the impact of gasoline-ethanol blending on autoignition, nitrogen oxide (NO x ), and soot emissions under low-load conditions. In order to represent the test gasoline (RD5-87), a four-component toluene primary reference fuel (TPRF)+ethanol (ETPRF) surrogate (with 10% ethanol by volume; E10) is employed. A three-dimensional (3D) engine CFD model employing finite-rate chemistry with a skeletal kinetic mechanism (including NO x sub-mechanism), adaptive mesh refinement (AMR), and hybrid method of moments (HMOM) is adopted to capture the in-cylinder combustion phenomena and soot/NO x emissions. The engine CFD model is validated against experimental data for three gasoline-ethanol blends: E10, E30 and E100, with varying ethanol content by volume. Model validation is carried out for a broad range of start-of-injection (SOI) timings (−21, −27, −36, and −45 crank angle degrees (°CA) after top-dead-center (aTDC)) with respect to in-cylinder pressure, heat release rate, combustion phasing, NO x and soot emissions. For relatively later injection timings (−21 and −27 °CA aTDC), E30 yields higher amount of soot than E10; while the trend reverses for early injection cases (−36 and −45 °CA aTDC ). On the other hand, E100 yields the lowest amount of soot among all fuels irrespective of SOI timing. Further, E10 shows a non-monotonic trend in soot emissions with SOI timing: SOI-36>SOI-45>SOI-21>SOI-27, while soot emissions from E30 exhibit monotonic decrease with advancing SOI timing. NO x emissions from various fuels follow a trend of E10>E30>E100. On the other hand, NO x emissions increase as SOI timing is advanced for all fuels, with an anomaly for E10 and E100 where NO x decreases when SOI is advanced beyond −36 °CA aTDC. Detailed analysis of the numerical results is performed to investigate the soot/NO x emission trends and elucidate the impact of chemical composition and physical properties on autoignition and emissions characteristics.

Computational fluid dynamics↗

DOE OSTI2022

Numerical analysis of soot emissions from gasoline-ethanol and gasoline-butanol blends under gasoline compression ignition conditions

In the present work, computational fluid dynamics (CFD) simulations of a single-cylinder gasoline compression ignition (GCI) engine were performed to investigate the impact of blending two biofuels, ethanol and n-butanol, with gasoline on the trade-off between combustion phasing and soot emissions under low load conditions. Here, in order to represent market gasoline (RD5-87), a four-component toluene primary reference fuel (TPRF) + ethanol (ETPRF) surrogate (with 20% ethanol by mole; E20) was formulated using a neural network based octane predictor such that the surrogate had the same ethanol content, Research Octane Number (RON) and Octane Sensitivity (S). In addition, a novel skeletal kinetic mechanism for ETPRF and TPRF + n-butanol (BTPRF) blends, incorporating polycyclic aromatic hydrocarbon (PAH) chemistry, was developed. A three-dimensional (3D) engine CFD formulation employing the skeletal mechanism, adaptive mesh refinement (AMR), finite-rate chemistry approach, and hybrid method of moments (HMOM) was adopted to capture the in-cylinder combustion phenomena and soot emissions. The engine CFD model was validated against RD5-87 experimental data for a broad range of start-of-injection (SOI) timings (-21/-27/-36/-45 crank angle degrees (CAD) after top-dead center (aTDC)), with respect to in-cylinder pressure, heat release rate, combustion phasing, and soot emissions. The closed-cycle simulation results were analyzed to elucidate the non-monotonic trend of soot emissions versus SOI timing: SOI-36 > SOI-45 > SOI-21 > SOI-27. Thereafter, the validated CFD model was employed to simulate the combustion of a gasoline-ethanol blend with 45% (by mole) ethanol (E45) and a gasoline-butanol blend with 45% (by mole) n-butanol (B45) under the same operating conditions to study the effects of fuel composition and SOI timing on combustion phasing and soot emissions. The sooting propensity followed the trend: B45 > E20 > E45 at all SOI timings. Overall, it was observed that the autoignition propensity was primarily related to fuel chemistry. On the other hand, sooting propensity showed strong coupling with both fuel chemistry and physical properties, with greater impact of fuel physical properties at advanced SOI timings.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2022

BETO 2021 Peer Review - 1.3.5.270 - Rewiring Algal Carbon Energetics for Renewables (RACER)

Critically needed improvements in biomass and biofuel intermediate productivity can be made by addressing fundamental inefficiencies in algal carbon conversion efficiency (CCE) to biofuel intermediates. Algae photosynthesis is, at best, able to convert 5-7% of incident light energy to biomass, while conversion to fuel intermediates falls 15-25% short of its maximum potential due to inefficiencies along the pathways. Recent progress in the Rewiring Algal Carbon Energetics (RACER) project consortium focused on a means to address the above inefficiencies in a pathway from algal biomass to a trifecta of fuel intermediates, ethanol, 2,3-butane diol, lipids and green biocrude. This project engineered a production-relevant algal species Desmodesmus armatus (SE 00107), to demonstrate biomass productivity improvements, with a doubling of the fuel intermediate yields. The new algae biorefinery paradigm embodied in RACER opens opportunities for algae engineering beyond efforts typically targeted solely at lipid content or improved light harvesting efficiency. Parallel approaches showed improved CCE through elimination of wasted energy during photosynthesis and increased carbon flux to transitory carbohydrate storage in the cells. Outdoor operation and nutrient management strategies with improvements in pretreatment, fermentation and extraction in a Combined Algal Processing approach showed a 40% reduction in MFSP, with a combined biofuel productivity of > 3700 gal/acre.

algal↗

DOE OSTI2021

Experimental study of flash boiling spray with isooctane, hexane, ethanol and their binary mixtures

The main goal of this study is to understand the effect of fuel properties on flash boiling sprays using multi-hole injectors. Macroscopic characteristics were investigated using Diffused Backlight Imaging (DBI) and quantified with liquid penetration length and spray angles. Phase Doppler Anemometry (PDA) was applied to measure the droplet size and velocity. Behaviors of spray with three single-component fuels (isooctane, hexane, ethanol) under different ambient pressures (100 kPa, 80 kPa, 50 kPa, 22 kPa) as well as their binary mixtures under different blend ratios (10%, 30%, 85%) were reported and analyzed. The results showed that adding ethanol or hexane to isooctane could both promote flash boiling by increasing the overall vapor pressure thus superheated degree. Under mixing ratios of 10% and 30%, sprays with ethanol blends showed more severe flash boiling comparing with sprays with hexane blends. Shorter liquid penetration and better liquid dispersion have been observed. Comparing with isooctane spray, the droplet size continuously decreased with increasing hexane content due to enhanced breakup and faster vaporization. Sprays with ethanol mixtures showed a different trend. Noticeable droplet size reduction has been observed for spray with 10% ethanol content. However, droplet size did not further decrease with higher blend ratios regardless of higher flash boiling intensity. Such observations indicate severe vaporization inhibition caused by the high latent heat of vaporization of ethanol. For sprays with all test fuels, collapsing occurred when the pressure ratio of ambient pressure to saturation pressure (Rp) dropped below 0.3.

03 NATURAL GAS↗

DOE OSTI2020

ASSESSING FUEL PROPERTY EFFECTS ON CAVITATION AND EROSION PROPENSITY USING A COMPUTATIONAL FUEL SCREENING TOOL

To advance compression ignition combustion strategies, researchers have evaluated fuel property effects and their impact on achieving higher efficiencies and lower emissions levels relative to current capabilities. Within the Department of Energy's Co-Optima initiative, there has been a recent focus on understanding the influence of fuel properties on fuel injection performance. To help identify candidate fuels that can meet desired injector performance metrics, a computational fuel screening tool is under development that can link fuel properties with the tendency of a given fuel to cavitate and lead to cavitation-induced erosion. In the initial development of this tool, five liquid fuel properties were selected to represent candidate fuels, namely density, viscosity, vapor pressure, surface tension, and heat of vaporization. A design of experiments methodology was employed to generate a set of pseudo fuel cases, which can represent the main effects and interactions among the fuel properties and be related to cavitation erosion predictions. Large eddy simulations were performed using a mixture modeling approach to predict the cavitation and erosion propensity of these pseudo-fuels in terms of the mean fuel vapor mole fraction and stored impact energy from repeated cloud collapse events. The low order regression models generated from this study revealed the importance of liquid fuel density on cavitation formation, whereas liquid viscosity was found to have a strong negative correlation with erosion severity. The surrogate models were then used in the fuel screening tool to rank the cavitation and erosion tendency of four candidate single-component fuels: methyl decanoate, isooctane, ethanol and n-dodecane. While the fuel screening tool was not able to quantitatively predict the cavitation and erosion response metrics, the tool was able to accurately rank the relative cavitation and erosion propensity of the four fuels. Overall, ethanol and iso-octane were observed to produce the highest levels of cavitation and erosion, respectively.

cavitation-induced erosion↗

DOE OSTI2021

Cellulosic biofuel production using emulsified simultaneous saccharification and fermentation (eSSF) with conventional and thermotolerant yeasts

Abstract Background Future expansion of corn-derived ethanol raises concerns of sustainability and competition with the food industry. Therefore, cellulosic biofuels derived from agricultural waste and dedicated energy crops are necessary. To date, slow and incomplete saccharification as well as high enzyme costs have hindered the economic viability of cellulosic biofuels, and while approaches like simultaneous saccharification and fermentation (SSF) and the use of thermotolerant microorganisms can enhance production, further improvements are needed. Cellulosic emulsions have been shown to enhance saccharification by increasing enzyme contact with cellulose fibers. In this study, we use these emulsions to develop an emulsified SSF (eSSF) process for rapid and efficient cellulosic biofuel production and make a direct three-way comparison of ethanol production between S. cerevisiae , O. polymorpha , and K. marxianus in glucose and cellulosic media at different temperatures. Results In this work, we show that cellulosic emulsions hydrolyze rapidly at temperatures tolerable to yeast, reaching up to 40-fold higher conversion in the first hour compared to microcrystalline cellulose (MCC). To evaluate suitable conditions for the eSSF process, we explored the upper temperature limits for the thermotolerant yeasts Kluyveromyces marxianus and Ogataea polymorpha , as well as Saccharomyces cerevisiae , and observed robust fermentation at up to 46, 50, and 42 °C for each yeast, respectively. We show that the eSSF process reaches high ethanol titers in short processing times, and produces close to theoretical yields at temperatures as low as 30 °C. Finally, we demonstrate the transferability of the eSSF technology to other products by producing the advanced biofuel isobutanol in a light-controlled eSSF using optogenetic regulators, resulting in up to fourfold higher titers relative to MCC SSF. Conclusions The eSSF process addresses the main challenges of cellulosic biofuel production by increasing saccharification rate at temperatures tolerable to yeast. The rapid hydrolysis of these emulsions at low temperatures permits fermentation using non-thermotolerant yeasts, short processing times, low enzyme loads, and makes it possible to extend the process to chemicals other than ethanol, such as isobutanol. This transferability establishes the eSSF process as a platform for the sustainable production of biofuels and chemicals as a whole.

09 BIOMASS FUELS↗

DOE OSTI2023

Implementing the First Incentive-Drive Carbon Capture and Storage Projects

Conference presentation at International Fuel and Ethanol Workshop and Expo (FEW), Omaha, Nebraska, June 13, 2023. An overview of the Plains CO 2 Reduction (PCOR) Partnership Initiative and active commercial carbon capture, utilization, and storage (CCUS) activity in the region. Includes solutions for CCUS deployment challenges.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2024

Annual Technology Baseline: The 2022 Transportation Update [Slides]

The Transportation Annual Technology Baseline (ATB) provides detailed cost and performance data, estimates, and assumptions for vehicle and fuel technologies in the United States. It includes current and projected estimates for vehicle technologies as well as conventional and alternative fuels, and it details the assumptions used to calculate those costs, such as gas and electricity prices, discount rates, and vehicle miles traveled. The 2022 update added more classes of light-duty vehicles, medium and heavy-duty vehicles, an aviation page, and it aligned diesel pathways with aviation pathways.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2024

Annual Technology Baseline (ATB): The 2024 Transportation Update

The Transportation Annual Technology Baseline (ATB) provides detailed cost and performance data, estimates, and assumptions for vehicle and fuel technologies in the United States. It includes current and projected estimates for vehicle technologies as well as fuels, and it details the assumptions used to calculate those costs, such as gas and electricity prices, discount rates, and vehicle miles traveled. The 2024 update added more biofuels pathways to align with pathways used in the Biomass Scenario Model.

ADVANCED PROPULSION SYSTEMS,DIRECT ENERGY CONVERSI↗

DOE OSTI2025

Environmental Metrics of Ethanol Production Improve with Increased Biomass Yield and Carbohydrate Content in Populus Trichocarpa

When selecting economically and environmentally advantageous genotypes for domestication in a biofuel supply chain, variability of cell-wall composition within a feedstock population and its impact on biorefinery metrics must be understood. We performed a life cycle assessment (LCA) on a poplar-to-ethanol supply chain to quantify global warming potential and cumulative energy demand as affected by variable carbohydrate content in a large representative natural variant population of Populus trichocarpa. The results showed that both environmental metrics decrease with increasing tree size and with increasing biomass carbohydrate content. These trends parallel prior economic results and provide clear direction to breeders or genetic engineers when improving poplar cultivars.

09 BIOMASS FUELS↗

DOE OSTI2022

DBD plasma-assisted ethanol steam reforming for green H 2 production: Process optimization through response surface methodology (RSM)

Herein this work investigates ethanol steam reforming (ESR) to produce hydrogen (H 2 ) in a dielectric barrier discharge (DBD) plasma reactor. A five-level, three-factor experiment design was performed using a response surface methodology (RSM) to evaluate the combined effects of the three process parameters, including discharge power, total flow rate, and ethanol-to-water (EtOH/H 2 O) molar ratio on the plasma-assisted ESR reaction. Quadratic regression models were employed in RSM to fit the experimental results and present the correlation between process parameters and targeted responses (EtOH conversion, H 2 yield, H 2 selectivity, and specific energy requirement (SER) for H 2 production). The results suggested that the EtOH/H 2 O molar ratio is considered to have the most significant effect on the EtOH conversion and H 2 , H 2 selectivity, while the total flow rate is the most significant parameter determining SER for H 2 production. Process optimization demonstrated the optimal process conditions, including a discharge power of 55.9 W, a total flow rate of 26.7 ml/min, and an EtOH/H 2 O molar ratio equal to 0.34. A validation test was performed and confirmed the feasibility of the optimization process.

08 HYDROGEN↗

DOE OSTI2023

The significance of biomass densification in biological-based biorefineries: A critical review

Replacing fossil fuels with renewable biofuels derived from lignocellulosic biomass is an important aspect of addressing environmental challenges and developing a sustainable industrial society. Densification overcomes the problems of low bulk density and poor flowability of biomass and has been commercialized for producing solid biofuels, but the overall impact of densification on biological-based biorefineries that primarily target liquid fuels (e.g., ethanol) is still under investigation. Herein, this review provides a thorough summary of the application of densified biomass in biological-based biorefineries. First, the effects of densification parameters as well as variables of biomass materials on the densified products’ quality are reviewed, and different commonly used densification technologies are also discussed and compared. Then, the discussion focuses on the physiochemical modifications of biomass caused by densification that may influence further pretreatment and/or enzymatic hydrolysis in biorefineries. Industrial pelleting has been generally shown to exhibit positive/neutral effects on the enzymatic hydrolysis of multiple biomass feedstocks after pretreatments, indicating the viability of using pellets as starting feedstocks in biorefineries. Densification causes structural disruption of biomass, which may facilitate further biochemical conversions. Integrating biomass densification in the feedstock supply chain is feasible for large-scale biorefineries to overcome the techno-economic barriers and become profitable. Suggestions are presented for the efficiency enhancement and cost reduction in densification-based biorefineries. To enable wider applications, it is now the time to employ more demo and full-scale activities in different regions of the world pushing the research and innovation of densification integrated within biorefining.

09 BIOMASS FUELS↗

DOE OSTI2022

Life-cycle greenhouse gas emissions reduction potential for corn ethanol refining in the USA

This study evaluates how low-carbon production technologies applicable to ethanol plants may reduce the life-cycle greenhouse gas emission (GHG) intensities of corn ethanol production in the USA. Results indicate that options focusing on incremental energy efficiency (e.g., combined heat and power) and yield improvements have a limited impact on GHG reductions. To achieve deep decarbonization (>50% GHG reduction compared to current corn ethanol production), a fuel switch from natural gas (NG) to alternative low-carbon fuels is needed. Replacing 50% of NG demand at ethanol plants with syngas from biomass through gasification or renewable natural gas from animal waste could achieve significant GHG reductions (11.7–23.5 g CO 2 e/MJ ethanol). Adding multiple technologies, including carbon capture and storage, to existing ethanol plants may further reduce GHG emissions to –18.4 g CO 2 e MJ –1 ethanol (including land-use change emissions), which is 120% lower than the carbon intensity of pure gasoline. These results could inform how the ethanol industry could move toward net-zero ethanol production.

09 BIOMASS FUELS↗

DOE OSTI2025

Clean Cities and Communities Partnership 2023 Activity Report

This is the 2023 report for the Clean Cities and Communities (CC&C) partnership. It tracks the metrics that have been reported by individual coalitions and aggregated to the national level. It looks at the various outreach activities, grant activities, and implementation of clean transportation technologies. Such technologies include natural gas vehicles, electric vehicles, propane vehicles, hydrogen fuel cell vehicles, biodiesel, ethanol, idle reduction technologies, fuel economy improvement technologies, vehicle-miles-traveled reduction technologies, and off-road technologies. The CC&C partnership had an energy use impact of over 1 billion gallons in 2023 and reduced emissions by nine million tons. Outreach, engagement, and training activities increased 18% from last year.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2021

Fatty acid derived alkyl ether fuels for compression ignition

A fuel for an internal combustion engine includes a fatty alkyl ether having a formula corresponding to formula (II): wherein x is 1-8, and y is 0 to 3; and the alkyl is an alkyl group having a number of carbon atoms that is less than the number of carbon atoms in the alkyl chain on the opposite side of the oxygen atom. The fatty alky ether can be used as a neat fuel or blend with biodiesel, diesel, ethanol or other fuels. The fatty alkyl ethers are improved in cetane number and cold flow properties over a biodiesel with fatty acid methyl acid methyl ester compounds. This is particularly valuable for compression ignition engines. A method of combustion in several types of engines is also disclosed.

Monroe, Eric↗

DOE OSTI2019

Hydroxide promotes carbon dioxide electroreduction to ethanol on copper via tuning of adsorbed hydrogen

Producing liquid fuels such as ethanol from CO 2 , H 2 O, and renewable electricity offers a route to store sustainable energy. The search for efficient electrocatalysts for the CO 2 reduction reaction relies on tuning the adsorption strength of carbonaceous intermediates. Here, we report a complementary approach in which we utilize hydroxide and oxide doping of a catalyst surface to tune the adsorbed hydrogen on Cu. Density functional theory studies indicate that this doping accelerates water dissociation and changes the hydrogen adsorption energy on Cu. We synthesize and investigate a suite of metal-hydroxide-interface-doped-Cu catalysts, and find that the most efficient, Ce(OH) x -doped-Cu, exhibits an ethanol Faradaic efficiency of 43% and a partial current density of 128 mA cm -2 . Mechanistic studies, wherein we combine investigation of hydrogen evolution performance with the results of operando Raman spectroscopy, show that adsorbed hydrogen hydrogenates surface *HCCOH, a key intermediate whose fate determines branching to ethanol versus ethylene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Single-step conversion of ethanol into n-butene-rich olefins over metal catalysts supported on ZrO 2 -SiO 2 mixed oxides

With airlines committed to drastically reduce their carbon footprint by 2050, producing jet fuel from renewable ethanol is of particular interest. Here we reported on an Ag/ZrO 2 /SBA-16 catalyst that is very effective for directly converting ethanol into to n-butene-rich olefins jet fuel precursors (i.e., 88% at full conversion). Here, we report on a Cu/ZrO 2 /SBA-16 catalyst that presents remarkable olefins selectivity (i.e., 89% at 96% conversion) and enhanced stability as compared to Ag/ZrO2/SBA-16 catalyst. Under severe operating conditions a conversion loss < 10% was observed with the Cu/ZrO 2 /SBA-16 catalyst as compared to a 50% loss of conversion with the Ag/ZrO 2 /SBA-16 catalyst. Combined experimental and computational tools revealed that replacing Ag with Cu shifts the reaction pathway of crotonaldehyde hydrogenation from 1,3-butadiene (i.e., coke precursor) production to butyraldehyde formation. Experiments conducted with 4%Cu/4%ZrO 2 supported on SBA-16, dealuminated zeolite Beta, and aluminum silicate revealed the performance and stability advantage of the SBA-16-supported catalyst.

09 BIOMASS FUELS↗

DOE OSTI2026

Redefining fuel heating value for engines: Accounting for heat of vaporization

Defining a fuel's heating value (i.e., energy content) is fundamental for calculating engine efficiency and for life cycle analysis comparisons between different fuels. Traditional definitions of lower heating value and higher heating value account for the effect of water vapor versus liquid water in the exhaust, which is important when the fuel is used in a furnace or boiler. In an engine, it is equally important to properly account for the energy required to vaporize liquid fuel. Heat of vaporization has a small effect for common hydrocarbon fuels, typically less than 1% of lower heating value, but the effect is much larger for other important fuels such as ethanol (3.4% of lower heating value) and methanol (5.9% of lower heating value). This paper defines a new type of fuel heating value that more accurately reflects the useful fuel energy content for engines. Vaporized heating value is defined as the heating value when starting with a vaporized fuel instead of a liquid fuel. It can be calculated by adding the fuel's heat of vaporization to the traditional lower heating value. This paper illustrates the rationale and benefits of using vaporized heating value using data from the literature.

09 BIOMASS FUELS↗