Search NASA⌕ Search

SEARCH · Search NASA

Results for “excitonic complex”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

68 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

A-Cation-Dependent Structure–Optical Property Relationships of Halide Perovskite Heterostructures with Complex Interfaces

Halide perovskite heterostructures offer promising interfacial interactions for energy conversion, yet challenges in synthesizing structurally well-defined systems limit detailed investigations into structure–property relationships. In this article, we report the synthesis of compositionally controlled 3D/3D and 3D/2D halide perovskite heterostructures using evaporation crystallization-polymer pen lithography (EC-PPL) and a single-particle analysis of their properties. By systematically varying A-site cation combinations and crystal dimensions, we show that heterointerfaces induce local lattice distortions that modulate vibrational dynamics and electron-phonon coupling. These interfacial effects result in significantly extended carrier lifetimes compared to compositionally similar pure phases. Raman spectroscopy, temperature-dependent photoluminescence, and power-dependent emission analysis reveal that localized structural modulations at the interface govern exciton-phonon interactions. These effects are magnified in smaller crystals due to increased interfacial contributions. Our findings highlight the critical role of interface-driven lattice control in tuning the optoelectronic properties of halide perovskites and provide design principles for engineering heterostructures in next-generation optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Increasing the Stability of Deep Blue Phosphor‐Sensitized OLEDs Using the Polariton‐Enhanced Purcell Effect

Abstract The stability of efficient, deep blue organic light‐emitting diodes (OLEDs) remains a major challenge in the field of organic electronics. Poor device stability originates from the high probability for destructive non‐radiative triplet exciton annihilation events. Phosphor‐sensitized fluorescence (PSF) is proposed to achieve an efficient, deep blue color by energy transfer from phosphors to fluorophores. Recently, the polariton‐enhanced Purcell (PEP) effect is introduced to decrease the triplet radiative lifetime and density, resulting in an increase in blue phosphorescent OLED lifetime. Here, the PEP effect is introduced to enhance the stability of the PSF‐OLEDs. It is shown that the PEP effect increases all radiative decay rates of the phosphors and fluorophores, leading to a reduction in the triplet annihilation events. Using a Pt‐complex phosphor sensitizer and a so‐called multi‐resonance fluorescent emitter in a PEP cavity, a 3.1‐fold lifetime increase is observed at a current density ofJ= 10 mA cm −2 , reduced EQE roll‐off and deep blue color with Commission Internationale de l'Eclairage coordinates of (0.13, 0.09). The PEP effect maximally extends PSF‐OLED lifetimes in devices with the highest triplet‐to‐singlet energy transfer rates. Moreover, this work suggests that the benefits of PEPs apply to all triplet‐based OLEDs.

Chemistry↗
DOE OSTI2024

Probing plexciton emission from 2D materials on gold nanotrenches

Probing strongly coupled quasiparticle excitations at their intrinsic length scales offers unique insights into their properties and facilitates the design of devices with novel functionalities. In this work, we investigate the formation and emission characteristics of plexcitons, arising from the interaction between surface plasmons in narrow gold nanotrenches and excitons in monolayer WSe 2 . We study this strong plasmon–exciton coupling in both the far-field and the near-field. Specifically, we observe a Rabi splitting in the far-field reflection spectra of about 80 meV under ambient conditions, consistent with our theoretical modeling. Using a custom-designed near-field probe, we find that plexciton emission originates predominantly from the lower-frequency branch, which we can directly probe and map its local field distribution. We precisely determine the plexciton's spatial extension, similar to the trench width, with nanometric precision by collecting spectra at controlled probe locations. Our work opens exciting prospects for nanoscale mapping and engineering of plexcitons in complex nanostructures with potential applications in nanophotonic devices, optoelectronics, and quantum electrodynamics in nanoscale cavities.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Quantum Mechanical Simulations of Dynamics of Electronic Excitations in Low-Dimensional Photovoltaics Materials

Dynamics of electronically excited states including exciton generation and relaxation, exciton-exciton interaction, and charge/energy transfer and transport, are critical to understanding and optimizing photovoltaic materials. Although considerable progress has been made, accurate experimental characterization of such crucial dynamics remains extremely challenging, especially in low-dimensional materials. In this talk, I will discuss how the advancement of quantum mechanical simulations of the dynamics of electronic excitations can reveal the physical mechanisms hindering or improving solar energy harvest. Specifically, we find that surface dangling-bond defects on silicon quantum dots cause rapid charge recombination and low carrier mobility in the inorganic-organic PV cells. Although small quantum dots are essentially free of defects, their optical gaps are too large. To solve this issue, a full-spectrum-light-absorption scheme is computationally designed, taking advantage of complexity and flexibility of low-dimensional materials consisting of different characteristics and dimensions. In this scheme the multifunctional ligands are used to (1) passivate against oxidation, (2) facilitate interfacial charge transfer, and (3) improve both charge transport and optical absorption. A joint theoretical and experimental study has demonstrated the feasibility of this approach. Finally, I will briefly talk about how this scheme and the well-tested quantum mechanical simulations can be employed to help improve energy-conversion efficiency in perovskite photovoltaics including perovskite-based tandem cells.

Zhigang Wu↗
DOE OSTI2024

Lateral Confinement in 2D Nanoplatelets: A Strategy to Expand the Colloidal Quantum Engineering Toolbox

Among colloidal nanocrystals, 2D nanoplatelets offer a unique set of properties with exceptionally narrow luminescence and low lasing thresholds. Furthermore, their anisotropic shape expands the playground for the complex design of heterostructures where spectra but also scattering rates can be engineered. A challenge that still remains is to combine shell growth which makes NPLs stable, with spectral tunability. Indeed, most reported shelled nanoplatelets end up being red emitters due to a loss of quantum confinement. Here, the combination of both lateral and in-plane confinements within a single heterostructure is explored. A CdS/CdSe/CdS/CdZnS core–crown–crown shell structure that enables yellow emission is grown and that is responsive to a large range of excitation including visible photons, X-ray photons, electron beams, and electrical excitations. k.p simulations predict that emission tunability of up to several 100 s of meV can be obtained in ideal structures. This material also displays stimulated emission resulting from bi-exciton emission with a low threshold. Once integrated into an LED stack, this material is compatible with sub-bandgap excitation and exhibits high luminance. Scaling of the electroluminescence properties by downsizing the pixel size is also investigated.

2D materials↗
DOE OSTI2025

Optimizing the impacts of solid additives on the operational stability and processing reliability of organic solar cells

Previous reports have revealed that by leveraging solid additives, organic solar cells (OSCs) can surpass the device’s performance beyond the intrinsic limitations of host photoactive molecules, a remarkable advancement. However, the impacts of more complex interactions introduced by solid additives are not yet well understood. Herein, optimizing the fabrication process based on the traditional efficiency-guided approach fails to represent the ideal and most practical devices. In particular, achieving superior operational stability while minimizing the device performance scattering was found to require processing solvent evaporation to be synchronized with the volatility of the chosen solid additive. However, this may be challenging since most organic photoactive materials display excellent efficiencies only with selected solvents. Accordingly, this work also demonstrates the potential of dual and complementary solvents selection, consisting of low boiling point (primary) and high boiling point (secondary). This strategy allows for the suppression of any potential trade-offs in efficiency. Meanwhile, the operational stability and precision of device performance are substantially enhanced. Additionally, solid additives have demonstrated that the singlet exciton dissociation rate does not limit the free charge generation yield. Finally, these findings are expected to reformulate OSC device fabrication strategies towards more practical devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Time-domain study of coupled collective excitations in quantum materials

Quantum materials hold immense promises for future applications due to their intriguing electronic, magnetic, thermal, and mechanical properties that often arise from a complex interplay between microscopic degrees of freedom. Important insights of such interactions come from studying the collective excitations of electrons, spins, orbitals, and lattice, whose cooperative motions play a crucial role in determining the novel behavior of these systems and offer us a key tuning knob to modify material properties on-demand through external perturbations. In this regard, ultrafast light-matter interaction has shown great potential in controlling the couplings of collective excitations, and rapid progress in a plethora of time-resolved techniques down to the attosecond regime has significantly advanced our understanding of the coupling mechanisms and guided us in manipulating the dynamical properties of quantum materials. This review aims to highlight recent experiments on visualizing collective excitations in the time domain, focusing on the coupling mechanisms between different collective modes such as phonon-phonon, phonon-magnon, phonon-exciton, magnon-magnon, magnon-exciton, and various polaritons. We introduce how these collective modes are excited by an ultrashort laser pulse and probed by different ultrafast techniques, and we explain how the coupling between collective excitations governs the ensuing nonequilibrium dynamics. We also provide some perspectives on future studies that can lead to discoveries of the emergent properties of quantum materials both in and out of equilibrium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2018

Heating Experiments of the Tagish Lake Meteorite: Investigation of the Effects of Short-Term Heating on Chondritic Organics

We present in this study the effects of short-term heating on organics in the Tagish Lake meteorite and how the difference in the heating conditions can modify the organic matter (OM) in a way that complicates the interpretation of a parent body's heating extent with common cosmo thermometers. The kinetics of short-term heating and its influence on the organic structure are not well understood, and any study of OM is further complicated by the complex alteration processes of the thermally metamorphosed carbonaceous chondrites - potential analogues of the target asteroid Ryugu of the Hayabusa2 mission - which had experienced post-hydration, short-duration local heating. In an attempt to understand the effects of short-term heating on chondritic OM, we investigated the change in the OM contents of the experimentally heated Tagish Lake meteorite samples using Raman spectroscopy, scanning transmission X-ray microscopy utilizing X-ray absorption near edge structure spectroscopy, and ultra-performance liquid chromatography fluorescence detection and quadrupole time of flight hybrid mass spectrometry. Our experiment suggests that graphitization of OM did not take place despite the samples being heated to 900 degrees Centigrade for 96 hours, as the OM maturity trend was influenced by the nature of the OM precursor, such as the presence of abundant oxygenated moieties. Although both the intensity of the 1s-sigma σ* exciton cannot be used to accurately interpret the peak metamorphic temperature of the experimentally heated Tagish Lake sample, the Raman graphite band widths of the heated products significantly differ from that of chondritic OM modified by long-term internal heating.

Chan, Queenie Hoi Shan↗
DOE OSTI2026

Iodine Close Packing in Hybrid Halide Bismuth(III) and Antimony(III) Semiconductors: (NH 3 (CH 2 ) 7 NH 3 ) 2 Bi 2 I 10 and (NH 3 (CH 2 ) 7 NH 3 ) 2 Sb 2 I 10

Simple features in complex hybrid inorganic–organic crystalline materials provide opportunities for targeted discovery of materials with desired optoelectronic properties. In this study, we report the structure and optoelectronic properties of isostructural (NH 3 (CH 2 ) 7 NH 3 ) 2 Bi 2 I 10 and (NH 3 (CH 2 ) 7 NH 3 ) 2 Sb 2 I 10 . The crystal structures are characterized by corner-connected metal-iodide octahedral chains that form a cubic close-packed iodine inorganic framework. Variable temperature UV–visible diffuse reflectance spectroscopy reveals stark contrasts in the onset of absorption and color changes between the [MX6]3– based structures, due to differences in the interaction of the (NH 3 (CH 2 ) 7 NH 3 ) 2+ organic ammonium cation and the iodine packing of the inorganic framework. Density functional theory (DFT) calculations reveal flat bands reflective of the pseudo-1D crystal structure. Dark microwave conductivity (DMC) and time-resolved microwave conductivity (TRMC) reveal an excitonic character with long carrier lifetimes, consistent with the electronically confined octahedral chains. Comparison of the structural features with those of other diammonium-containing crystals reveals that diammoniumheptane can substitute into structures, displacing inorganic octahedra while retaining a close-packed anion framework. This provides a means for targeting new hybrid materials in which “vacancy-ordering” provides a crystal chemical approach for targeting desirable optoelectronic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Phycobilisome core architecture influences photoprotective quenching by the Orange Carotenoid Protein

Photosynthetic organisms rely on sophisticated photoprotective mechanisms to prevent oxidative damage under high or fluctuating solar illumination. Cyanobacteria, which have evolved a unique, water-soluble light-harvesting complex—the phycobilisome—achieve photoprotection through a photoactivatable quencher called the Orange Carotenoid Protein (OCP). Phycobilisomes are highly symmetric and modular, formed by hierarchical assembly of conserved subunits into diverse geometries ranging from simple bundles to elaborate fan- or bouquet-like macromolecular architectures. Although OCP is known to provide photoprotection across species of cyanobacteria with different phycobilisome structures, it is not known whether or how these structural variations relate to changes in the photoprotective function of OCP. For example, OCP was recently discovered to bind as a dimer at two specific instances of an abundant structural motif on the tricylindrical phycobilisome of Synechocystis sp. PCC 6803, yet these sites are sterically inaccessible on a more common pentacylindrical phycobilisome ( Anabaena sp. PCC 7120). To understand how structural modularity and binding specificity contribute to conservation of OCP binding sites and function across different phycobilisome architectures, here we compare experimentally measured photophysical states accessible to these prototypical tricylindrical and pentacylindrical phycobilisomes, with and without OCP, at the single-molecule level. Together with Monte Carlo simulations of exciton transfer in OCP-quenched phycobilisomes, our results suggest that OCP binds at distinct and specific sites in each type of phycobilisome, yet provides nearly identical quenching strength to both phycobilisomes. Our findings highlight the utility of modular phycobilisome structures in balancing robust conservation of photoprotective function with adaptability of site-specific binding across species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Complexity in the Photofunctionalization of Single-Wall Carbon Nanotubes with Hypochlorite

The reaction of aqueous suspensions of single-wall carbon nanotubes (SWCNTs) with UV-excited sodium hypochlorite has previously been reported to be an efficient route for doping nanotubes with oxygen atoms. Here, we have investigated how this reaction system is affected by pH level, dissolved O 2 content, and radical scavengers and traps. Products were characterized with near-IR fluorescence, Raman, and XPS spectroscopy. The reaction is greatly accelerated by removal of dissolved O 2 and strongly suppressed by TEMPO, a radical trap. Alcohols added as radical scavengers alter the reaction efficiency and the product peak emission wavelengths. Photofunctionalization with 300 nm irradiation is substantially less efficient at pH levels low enough to protonate the OCl – ion to HOCl. We deduce that in mildly treated high pH samples, the main product is sp 2 hybridized O-doped adducts formed by reaction of SWCNTs with atomic oxygen in its 3 P (ground) level. By contrast, treatment under low pH conditions leads to sp 3 hybridized SWCNT adducts formed by the addition of secondary radicals from reactions of • OH and • Cl. There is also evidence for additional photoreactions of product species under stronger irradiation. Researchers using photoexcited hypochlorite for SWCNT functionalization should be alert to the range of products and the sensitivity to reaction conditions in this system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Mesoscale atomic engineering in a crystal lattice

Controlling individual atoms using lasers, ion traps and scanning probe tips has transformed our understanding of matter and enabled breakthroughs in quantum science. Extending this control into three-dimensional (3D) solids and across mesoscopic scales, however, remains a foundational challenge. Electron irradiation in electron microscopes is known to induce atomic displacements, and atomic manipulation has been proposed and demonstrated. Yet repeated and deterministic control has remained elusive. Here, in this study, we demonstrate deterministic atomic engineering in a 3D crystal, creating ordered arrangements of more than 40,000 user-defined defects within minutes across a 150 nm × 100 nm × 13 nm volume. By steering individual Cr atoms in the magnetic semiconductor CrSBr into selected interstitial sites using an electron beam directed with sub-20-pm-scale accuracy, we create vacancy–interstitial complexes. The resulting impurity array forms a mesoscale crystal embedded within the host lattice, a new form of engineered artificial matter that remains stable at room temperature and outside the microscope. By tracking Cr atom displacements, we identify conditions under which the defect structures are predictable. Our calculations suggest that these defects form correlated impurity states with intra-defect optical transitions and inter-defect kinetic and Coulomb interactions. This establishes a generalizable platform for atomic defect engineering at mesoscopic, and potentially macroscopic, scales, opening opportunities for scalable quantum technologies, including deterministic colour-centre placement, quantum simulation of many-body lattice models and atomic-scale manufacturing.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Evaluating Brightness and Stability of Cathodoluminescence from Colloidal Semiconductor Nanocrystals

Cathodoluminescence offers promise as a technique for correlation of atomic structure with electronic structure at the level of individual nanoparticles or even defects, with the ability to analyze complex nanostructures at length-scales far below those typically available to optical spectroscopy. Unlike other forms of electron microscopy, cathodoluminescence offers direct insights into the electronic structure of the visualized sample. Despite reports more than 10 years ago of individual nanoparticle cathodoluminescence, effective cathodoluminescence collection from colloidal semiconductor materials is relatively rare and remains challenging due to the instability of materials under the conditions of electron beam irradiation. In this work, to clarify the roadblocks for cathodoluminescence analysis of colloidal nanocrystals, we attempt a comprehensive study of the cathodoluminescence properties of semiconductor quantum shells, which have a thin concentric CdSe shell surrounding CdS nanoparticles, then surrounded by a further concentric CdS shell. These same materials were recently demonstrated to show promising scintillation performance in radioluminescence measurements, including high brightness (up to 100 ph/keV) and excellent durability. Comparative quantum yield measurements are designed to assess the brightness of semiconductor nanocrystal films, which show that the quantum shells are much less bright under electron irradiation compared to X-ray photons. Instability of CL emission is assigned to charging effects on the samples—and not thermal effects—through a series of voltage, current, dwell time, and atmospheric pressure experiments.

cathodoluminescence↗
DOE OSTI2025

Shell Thickness and Heterogeneity Dependence of Triplet Energy Transfer between Core–Shell Quantum Dots and Adsorbed Molecules

Quantum dot (QD)-sensitized triplet energy transfer (TET) has found promising applications in photon upconversion and photocatalysis. However, the underlying mechanism of TET in the QD-acceptor complex remains unclear despite the well-developed TET theory for the molecular donor–acceptor systems. Herein, the coupling strength of TET from CdSe/CdS core–shell QDs to 9-anthracene carboxylic acid (ACA) was studied by measuring the TET rate as a function of shell thickness with time-resolved photoluminescence. The change of TET-coupling strength with increasing shell thickness was further compared to those of electron and hole transfers from QDs so that we could test whether QD-sensitized TET is mediated by the charge transfer virtual state and can be considered as simultaneous electron and hole transfers as in molecular donor–acceptor systems. The measured coupling strength of TET from the CdSe/CdS QD decreases exponentially with the CdS shell thickness r: |V|(r) = |V|(0)e –βr , with an exponential decay factor β of 0.19 Å –1 , which is smaller than the sum of the measured decay factors for electron transfer to methyl viologen (0.18 Å –1 ) and hole transfer to phenothiazine (0.29 Å –1 ) from the same QD. This inconsistency is explained by the broadening of QD shell thicknesses in the distance dependence study, which significantly modifies the TET-coupling strength and driving force, resulting in a shallower distance dependence of the TET rate constants. This study sheds light on the fundamental mechanisms of QD-sensitized TET reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗