Search NASA⌕ Search

SEARCH · Search NASA

Results for “explicit Runge-Kutta”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

A multiblock multigrid method for the solution of the three-dimensional Euler equations

A general multiblock, multigrid method for the solution of the Euler equations has been developed. Two types of numerical methods were investigated, van Leer's flux-vector-splitting and Roe's flux-difference-splitting, with MUSCL type differencing used in both methods. An explicit two-step method and a multi-stage Runge-Kutta method have been tested. Results are presented for test cases of a channel flow, nozzle exhaust flow, and a transonic wing.

Cannizzaro, Frank E.↗
NASA NTRS1990

Three-dimensional flux-split Euler schemes involving unstructured dynamic meshes

Improved algorithms for the solution of the three-dimensional time-dependent Euler equations are presented for aerodynamic analysis involving unstructured dynamic meshes. The improvements have been developed recently to the spatial and temporal discretizations used by unstructured grid flow solvers. The spatial discretization involves a flux-split approach which is naturally dissipative and captures shock waves sharply with at most one grid point within the shock structure. The temporal discretization involves either an explicit time-integration scheme using a multi-stage Runge-Kutta procedure or an implicit time-integration scheme using a Gauss-Seidel relaxation procedure which is computationally efficient for either steady or unsteady flow problems. With the implicit Gauss-Seidel procedure, very large time steps may be used for rapid convergence to steady state, and the step size for unsteady cases may be selected for temporal accuracy rather than for numerical stability. Steady flow results are presented for both the NACA 0012 airfoil and the ONERA M6 wing to demonstrate applications of the new Euler solvers. The paper presents a description of the Euler solvers along with results and comparisons which assess the capability.

Batina, John T.↗
NASA NTRS1991

A fast upwind solver for the Euler equations on three-dimensional unstructured meshes

An upwind scheme is presented for solving the three-dimensional Euler equations on unstructured tetrahedral meshes. Spatial discretization is accomplished by a cell-centered finite-volume formulation using flux-difference splitting. Higher-order differences are formed by a novel cell reconstruction process which results in computational times per cell comparable to those of structured codes. The approach yields highly resolved solutions in regions of smooth flow while avoiding oscillations across shocks without explicit limiting. Solutions are advanced in time by a 3-stage Runge-Kutta time-stepping scheme with convergence accelerated to steady state by local time stepping and implicit residual smoothing. Solutions are presented for a range of configurations in the transonic speed regime to demonstrate code accuracy, speed, and robustness. The results include an assessment of grid sensitivity and convergence acceleration by mesh sequencing.

Frink, Neal T.↗
NASA NTRS1991

Computation of supersonic and low subsonic cascade flows using an explicit Navier-Stokes technique and the kappa-epsilon turbulence model

A fully explicit two-dimensional flow solver, based on a four-stage Runge-Kutta scheme, was developed and utilized to predict two-dimensional viscous flow through turbomachinery cascades for which experimental data is available. The formulation is applied to the density averaged Navier-Stokes equations. Several features of the technique improve the ability of the code to predict high Reynolds number flows on highly stretched grids. These include a low Reynolds number compressible form of the k-epsilon turbulence model, anisotropic scaling of artificial dissipation terms and locally varying timestep evaluation based on hyperbolic and parabolic stability considerations. Comparisons between computation and experiment are presented for both a supersonic and a low-subsonic compressor cascade. These results indicate that the code is capable of predicting steady two-dimensional viscous cascade flows over a wide range of Mach numbers in reasonable computational times.

Kunz, R. F.↗
NASA NTRS1988

An unconditionally stable Runge-Kutta method for unsteady flows

A quasi-three dimensional analysis was developed for unsteady rotor-stator interaction in turbomachinery. The analysis solves the unsteady Euler or thin-layer Navier-Stokes equations in a body fitted coordinate system. It accounts for the effects of rotation, radius change, and stream surface thickness. The Baldwin-Lomax eddy viscosity model is used for turbulent flows. The equations are integrated in time using a four stage Runge-Kutta scheme with a constant time step. Implicit residual smoothing was employed to accelerate the solution of the time accurate computations. The scheme is described and accuracy analyses are given. Results are shown for a supersonic through-flow fan designed for NASA Lewis. The rotor:stator blade ratio was taken as 1:1. Results are also shown for the first stage of the Space Shuttle Main Engine high pressure fuel turbopump. Here the blade ratio is 2:3. Implicit residual smoothing was used to increase the time step limit of the unsmoothed scheme by a factor of six with negligible differences in the unsteady results. It is felt that the implicitly smoothed Runge-Kutta scheme is easily competitive with implicit schemes for unsteady flows while retaining the simplicity of an explicit scheme.

Jorgenson, Philip C. E.↗
NASA NTRS1989

An unconditionally stable Runge-Kutta method for unsteady flows

A quasi-three-dimensional analysis was developed for unsteady rotor-stator interaction in turbomachinery. The analysis solves the unsteady Euler or thin-layer Navier-Stokes equations in a body-fitted coordinate system. It accounts for the effects of rotation, radius change, and stream surface thickness. The Baldwin-Lomax eddy viscosity model is used for turbulent flows. The equations are integrated in time using a four-stage Runge-Kutta scheme with a constant time step. Implicit residual smoothing was employed to accelerate the solution of the time accurate computations. The scheme is described and accuracy analyses are given. Results are shown for a supersonic through-flow fan designed for NASA Lewis. The rotor:stator blade ratio was taken as 1:1. Results are also shown for the first stage of the Space Shuttle Main Engine high pressure fuel turbopump. Here the blade ratio is 2:3. Implicit residual smoothing was used to increase the time step limit of the unsmoothed scheme by a factor of six with negligible differences in the unsteady results. It is felt that the implicitly smoothed Runge-Kutta scheme is easily competitive with implicit schemes for unsteady flows while retaining the simplicity of an explicit scheme.

Jorgenson, Philip C. E.↗
NASA NTRS1991

An intrinsically n-dimensional generalized flux vector splitting implicit finite element Euler algorithm

A generalized flux-vector splitting implicit Galerkin finite-element algorithm for the Euler equations in curvilinear coordinates for ideal and reacting gases is derived. For an arbitrary equation of state, the curvilinear-coordinate flux vector is split in kinematic and kinetic components, and the associated jacobian matrix eigenvalues explicitly depend on the metric data. After directional semidiscretization, the terminal ordinary differential-equation system is solved via a nonlinearly stable implicit Runge-Kutta scheme in concert with an accurate tensor matrix product factorization. The results for selected two-dimensional supersonic and axisymmetric hypersonic flows validate the algorithm and verify its robustness for curvilinear-coordinate computations. The evolution towards a steady state is achieved for large Courant numbers without indication of numerical instabilities.

Iannelli, G. S.↗
NASA NTRS1986

Computation of three-dimensional, rotational flow through turbomachinery blade rows for improved aerodynamic design studies

The performance of a three dimensional computer code developed for predicting the flowfield in stationary and rotating turbomachinery blade rows is described in this study. The four stage Runge-Kutta numerical integration scheme is used for solving the governing flow equations and yields solution to the full, three dimensional, unsteady Euler equations in cylindrical coordinates. This method is fully explicit and uses the finite volume, time marching procedure. In order to demonstrate the accuracy and efficiency of the code, steady solutions were obtained for several cascade geometries under widely varying flow conditions. Computed flowfield results are presented for a fully subsonic turbine stator and a low aspect ratio, transonic compressor rotor blade under maximum flow and peak efficiency design conditions. Comparisons with Laser Anemometer measurements and other numerical predictions are also provided to illustrate that the present method predicts important flow features with good accuracy and can be used for cost effective aerodynamic design studies.

Subramanian, S. V.↗
NASA NTRS1985

On the Solution of the Three-Dimensional Flowfield About a Flow-Through Nacelle

The solution of the three dimensional flow field for a flow through nacelle was studied. Both inviscid and viscous inviscid interacting solutions were examined. Inviscid solutions were obtained with two different computational procedures for solving the three dimensional Euler equations. The first procedure employs an alternating direction implicit numerical algorithm, and required the development of a complete computational model for the nacelle problem. The second computational technique employs a fourth order Runge-Kutta numerical algorithm which was modified to fit the nacelle problem. Viscous effects on the flow field were evaluated with a viscous inviscid interacting computational model. This model was constructed by coupling the explicit Euler solution procedure with a flag entrainment boundary layer solution procedure in a global iteration scheme. The computational techniques were used to compute the flow field for a long duct turbofan engine nacelle at free stream Mach numbers of 0.80 and 0.94 and angles of attack of 0 and 4 deg.

Compton, William Bernard↗
NASA NTRS1986

Unsteady transonic flows past airfoils using the Euler equations

An explicit finite difference solver for the Euler equations was developed and used to calculate the flow past two of the AGARD standard aeroelastic configurations, an NACA 64A010 and an NLR 7301. The algorithm employed uses a modified four step Runge-Kutta time stepping scheme, boundary conditions determined from the time-dependent theory of characteristics and an unsteady automatic grid generation procedure. In general, the calculated results are in good agreement with available experiment. Moreover, they demonstrate the importance of using the Euler equations for super-critical airfoils and in situations where the transonic small disturbance theory results in poor agreement with experiment.

Smith, G. E.↗
NASA NTRS1987

On implicit Runge-Kutta methods for parallel computations

Implicit Runge-Kutta methods which are well-suited for parallel computations are characterized. It is claimed that such methods are first of all, those for which the associated rational approximation to the exponential has distinct poles, and these are called multiply explicit (MIRK) methods. Also, because of the so-called order reduction phenomenon, there is reason to require that these poles be real. Then, it is proved that a necessary condition for a q-stage, real MIRK to be A sub 0-stable with maximal order q + 1 is that q = 1, 2, 3, or 5. Nevertheless, it is shown that for every positive integer q, there exists a q-stage, real MIRK which is I-stable with order q. Finally, some useful examples of algebraically stable MIRKs are given.

Keeling, Stephen L.↗
DOE OSTI2025

Stage-local partitioned two-step runge-kutta methods for large systems of ordinary differential equations

We introduce stage-local partitioned two-step Runge-Kutta methods are an extension of standard two-step Runge-Kutta methods, which are an alternative to the standard additive two-step Runge-Kutta methods currently existing in the literature. Furthermore, these new schemes are designed with an eye towards truly N-partitioned systems and leverage local stage approximations to make several computationally interesting approximations viable. Specifically, the focus on local stage approximations makes possible the construction of truly asynchronous schemes, in the parallel sense, possible. In addition, we show that an implicit-explicit approach to these schemes can lead to methods that require the inversion of only local nonlinear systems.

Applied Dynamical Systems↗
NASA NTRS1990

Formulation of boundary conditions for the multigrid acceleration of the Euler and Navier Stokes equations

An explicit, Multigrid algorithm was written to solve the Euler and Navier-Stokes equations with special consideration given to the coarse mesh boundary conditions. These are formulated in a manner consistent with the interior solution, utilizing forcing terms to prevent coarse-mesh truncation error from affecting the fine-mesh solution. A 4-Stage Hybrid Runge-Kutta Scheme is used to advance the solution in time, and Multigrid convergence is further enhanced by using local time-stepping and implicit residual smoothing. Details of the algorithm are presented along with a description of Jameson's standard Multigrid method and a new approach to formulating the Multigrid equations.

Jentink, Thomas Neil↗
NASA NTRS1990

Tailoring explicit time-marching schemes to improve convergence characteristics

Multi-stage time-stepping schemes, tailored to chosen spatial-differencing operators, are derived and tested. The schemes are constructed to give optimal damping of the high-frequency waves. They are ideal for use with multi-grid acceleration. The concept of characteristic time-stepping, necessary for the extension of the scalar analysis to systems of equations, is presented. The schemes show a marked improvement over Runge-Kutta schemes.

Powell, Kenneth G.↗
NASA NTRS1989

An efficient cell-vertex multigrid scheme for the three-dimensional Navier-Stokes equations

A cell-vertex scheme for the three-dimensional Navier-Stokes equations, which is based on central difference approximations and Runge-Kutta time stepping, is described. Using local time stepping, implicit residual smoothing with locally varying coefficients, a multigrid method and carefully controlled dissipative terms, very good convergence rates are obtained for two- and three-dimensional flows. Details of the acceleration techniques, which are important for convergence on meshes with high aspect-ratio cells, are discussed. Emphasis is put on the analysis of the stability properties of the implicit smoothing of the explicit residuals with coefficients, which depend on cell aspect ratios.

Radespiel, R.↗
NASA NTRS1986

Development of an explicit multigrid algorithm for quasi-three-dimensional viscous flows in turbomachinery

A rapid quasi three-dimensional analysis was developed for blade-to-blade flows in turbomachinery. The analysis solves the unsteady Euler or thin layer Navier-Stokes equations in a body-fitted coordinate system. It accounts for the effects of rotation, radius change, and stream-surface thickness. The Baldwin-Lomax eddy-viscosity model is used for turbulent flows. The equations which are solved b a two-stage Runge-Kutta scheme made efficient by use of vectorization, a variable time-step, and a flux-based multigrid scheme, are described. A stability analysis is presented for the two-stage. Results for a flat-plate model problem show the applicability of the method to axial, radial, and rotating geometries. Results for a centrifugal impeller and a radial diffuser show that the quasi three-dimensional viscous analysis can be a practical design tool.

Chima, R. V.↗
NASA NTRS1985

Development of an explicit multigrid algorithm for quasi-three-dimensional viscous flows in turbo-machinery

A rapid quasi three-dimensional analysis was developed for blade-to-blade flows in turbomachinery. The analysis solves the unsteady Euler or thin layer Navier-Stokes equations in a body-fitted coordinate system. It accounts for the effects of rotation, radius change, and stream-surface thickness. The Baldwin-Lomax eddy-viscosity model is used for turbulent flows. The equations which are solved by a two-stage Runge-Kutta scheme made efficient by use of vectorization, a variable time-step, and a flux-based multigrid scheme, are described. A stability analysis is presented for the two-stage scheme. Results for a flat-plate model problem show the applicability of the method to axial, radial, and rotating geometries. Results for a centrifugal impeller and a radial diffuser show that the quasi three-dimensional viscous analysis can be a practical design tool.

Chima, R. V.↗