Search NASA⌕ Search

SEARCH · Search NASA

Results for “extensions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Development and Testing of Carbon-Carbon Nozzle Extensions for Upper Stage Liquid Rocket Engines

Carbon-carbon (C-C) composite nozzle extensions are of interest for use on a variety of launch vehicle upper stage engines and in-space propulsion systems. The C-C nozzle extension technology and test capabilities being developed are intended to support National Aeronautics and Space Administration (NASA) and Department of Defense (DOD) requirements, as well as those of the broader Commercial Space industry. For NASA, C-C nozzle extension technology development primarily supports the NASA Space Launch System (SLS) and NASA's Commercial Space partners. Marshall Space Flight Center (MSFC) efforts are aimed at both (a) further developing the technology and databases needed to enable the use of composite nozzle extensions on cryogenic upper stage engines, and (b) developing and demonstrating low-cost capabilities for testing and qualifying composite nozzle extensions. Recent, on-going, and potential future work supporting NASA, DOD, and Commercial Space needs will be discussed. Information to be presented will include (a) recent and on-going mechanical, thermal, and hot-fire testing, as well as (b) potential future efforts to further develop and qualify domestic C-C nozzle extension solutions for the various upper stage engines under development.

Valentine, Peter G.↗
NASA NTRS2017

Carbon-Carbon Nozzle Extension Development in Support of In-Space and Upper-Stage Liquid Rocket Engines

Upper stage and in-space liquid rocket engines are optimized for performance through the use of high area ratio nozzles to fully expand combustion gases to low exit pressures, increasing exhaust velocities. Due to the large size of such nozzles, and the related engine performance requirements, carbon-carbon (C-C) composite nozzle extensions are being considered to reduce weight impacts. Currently, the state-of-the-art is represented by the metallic and foreign composite nozzle extensions limited to approximately 2000 degrees F. used on the Atlas V, Delta IV, Falcon 9, and Ariane 5 launch vehicles. NASA and industry partners are working towards advancing the domestic supply chain for C-C composite nozzle extensions. These development efforts are primarily being conducted through the NASA Small Business Innovation Research (SBIR) program in addition to other low level internal research efforts. This has allowed for the initial material development and characterization, subscale hardware fabrication, and completion of hot-fire testing in relevant environments. NASA and industry partners have designed, fabricated and hot-fire tested several subscale domestically produced C-C extensions to advance the material and coatings fabrication technology for use with a variety of liquid rocket and scramjet engines. Testing at NASA's Marshall Space Flight Center (MSFC) evaluated heritage and state-of-the-art C-C materials and coatings, demonstrating the initial capabilities of the high temperature materials and their fabrication methods. This paper discusses the initial material development, design and fabrication of the subscale carbon-carbon nozzle extensions, provides an overview of the test campaign, presents results of the hot fire testing, and discusses potential follow-on development work. The follow on work includes the fabrication of ultra-high temperature materials, larger C-C nozzle extensions, material characterization, sub-element testing and hot-fire testing at larger scale.

Gradl, Paul R.↗
NASA NTRS2021

Carbon- and Ceramic-Matrix Composite Nozzle Extensions for Liquid Rocket Engines

Carbon-carbon (C-C) composite and ceramic matrix composite (CMC) nozzle extensions are being considered and developed for use with a variety of cryogenic liquid rocket engine systems. Some of the potential applications include in-space, lunar lander, and launch vehicle upper stage propulsion systems. Composite material systems of interest include C-C and carbon/silicon-carbide (C-SiC) composites, as well as modified versions of such composites (coatings, mixed matrices, oxidation inhibitors, etc.). Nozzle extension materials and fabrication methods under development by industry support both National Aeronautics and Space Administration (NASA) and Department of Defense (DOD) requirements, as well as those of the broader Commercial Space industry. Marshall Space Flight Center (MSFC) efforts are aimed at both (a) assisting industry with the development of composite nozzle extensions for cryogenic liquid rocket engines, and (b) developing and demonstrating capabilities for characterizing, testing, and qualifying such nozzle extensions. Results of recent MSFC nozzle-extension characterization efforts and engine firing demonstrations will be presented.

carbon-carbon↗
DOE OSTI2018

Lamellipodial wrinkles in fish keratocytes as markers of imperfect coordination between extension and retraction during cell migration

Highlights: • Migrating fish keratocytes display prominent lamellipodial wrinkles. • A numerical model shows that wrinkles can arise due to compressive stresses. • In the model, wrinkles only arise if the rear of the cell is transiently stuck. • Experimentally pinning the rear of the cell also induces wrinkles. • Wrinkles reflect imbalances between retraction and extension during migration. Cell migration involves the precise coordination between extension at the front of the cell and retraction at the rear. This coordination is particularly evident in fast moving cells such as fish keratocytes, where it leads to highly stable gliding motion, propelled at the front by broad, 0.1-0-2 μm thick lamellipodia. Transient uncoupling between extension and retraction can occur if the rear is temporarily stuck, which might eventually lead to cell shape instabilities. We have frequently observed in fish keratocytes the presence of lamellipodial radial wrinkles, detected by confocal, scanning electron and side-view microscopy as folds in the lamellipodium up to 2 μm in height. Using a linear finite elements analysis, we simulated the displacement of cells either with perfect coordination between extension and retraction or with the rear transiently stuck while the front continues extending, and we observed that in this last condition compression stresses arise in the lamellipodium which predict the formation of the observed pattern of lamellipodial wrinkles. In support of the numerical modeling findings, we observed that the transient halting of retraction at the rear using micromanipulation induced the formation of lamellipodial wrinkles in previously flat lamellipodia. The obtained results suggest that the conspicuous lamellipodial wrinkles observed in migrating fish keratocytes are the product of transient imbalances between front and rear displacements, and are therefore useful markers of the short scale dynamics of extension and retraction coordination during cell migration.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1978

Crack extension from flaws in a brittle material subjected to compression

The mechanisms by which cracks extend from flaws in brittle materials subjected to compressive loads are presented. Although it is recognized that most geological materials are neither dense nor single-phase, this experimental study and analysis are restricted to single-phase, dense materials in order to provide a model amenable to analysis and experimental confirmation. The flaws which occur in dense, single-phase materials are divided into three types, each type having different characteristics of crack extension. Experimental studies of crack extension from flaws introduced into blocks of polymethylmethacrylate plastic are described. The studies show that crack extension from three dimensional flaws is more complex than two-dimensional theories predict. The extension of secondary cracks may result in more damage than that which would be predicted by considering only the primary crack extension treated by current theories. The importance of the dynamic behavior of flaws which stick and then suddenly slip is shown.

Adams, M.↗
NASA NTRS1986

A study of tectonic activity in the Basin-Range Province and on the San Andreas Fault. No. 1: Kinematics of Basin-Range intraplate extension

Strain rates assessed from brittle fracture and total brittle-ductile deformation measured from geodetic data were compared to estimates of paleo-strain from Quaternary geology for the intraplate Great Basin part of the Basin-Range, western United States. These data provide an assessment of the kinematics and mode of lithospheric extension that the western U.S. Cordillera has experienced from the past few million years to the present. Strain and deformation rates were determined by the seismic moment tensor method using historic seismicity and fault plane solutions for sub-regions of homogeneous strain. Contemporary deformation in the Great Basin occurs principally along the active seismic zones. The integrated opening rate across the entire Great Basin is accommodated by E-E extension at 8 to 10 mm/a in the north that diminishes to NW-SE extension of 3.5 mm/a in the south. Zones of maximum lithospheric extension correspond to belts of thin crust, high heat flow, and Quaternary basaltic volcanism, suggesting that these parameters are related through mechanism of extension such as a stress relaxation, allowing bouyant uplift and ascension of magmas.

Eddington, P. K.↗
NASA NTRS1985

Cenozoic extension and magmatism in Arizona

The Basin and Range Province of Arizona was the site of two episodes of Cenozoic extension that can be distinguished on the basis of timing, direction and style of extension, and associated magmatism. The first episode of extension occurred during Oligocene to mid-Miocene time and resulted in the formation of low-angle detachment faults, ductile shear zones (metamorphic core complexes), and regional domains of tilted fault blocks. Evidence for extreme middle Tertiary crustal extension in a NE to SW to SW to ENE to WSW direction has been recognized in various parts of the Basin and Range of Arizona, especially in the Lake Mead area and along the belf of metamorphic core complexes that crosses southern Arizona from Parker to Tucson. New geologic mapping and scrutiny of published geologic maps indicates that significant middle Tertiary extension is more widely distributed than previously thought. The state can be subdivided into regional tilt-block domains in which middle Tertiary rocks dip consistently in one direction. The dip direction in any tilt-block domain is generally toward the breakaway of a low-angle detachment fault that underlies the tilt-block domain; we interpret this an indicating that normal faults in the upper plate of a detechment fault are generally synthetic, rather than antithetic, with respect to the detachment fault.

Reynolds, S. J.↗
NASA NTRS1989

Modula-2*: An extension of Modula-2 for highly parallel programs

Parallel programs should be machine-independent, i.e., independent of properties that are likely to differ from one parallel computer to the next. Extensions are described of Modula-2 for writing highly parallel, portable programs meeting these requirements. The extensions are: synchronous and asynchronous forms of forall statement; and control of the allocation of data to processors. Sample programs written with the extensions demonstrate the clarity of parallel programs when machine-dependent details are omitted. The principles of efficiently implementing the extensions on SIMD, MIMD, and MSIMD machines are discussed. The extensions are small enough to be integrated easily into other imperative languages.

Tichy, Walter F.↗
NASA NTRS1945

Tests of Four Full-scale Propellers to Determine the Effect of Trailing-edge Extensions on Propeller Aerodynamic Characteristics

Propellers with trailing-edge extensions were studied to determine aerodynamic characteristics. Trailing-edge extension increased power absorbed by propeller with little loss in efficiency. Power coefficient for maximum efficiency was greater for 20% camber type extension than for 20% straight type extension over range of advance ratio of 1.0 to 2.5 although camber type was less efficient. Efficiency was about the same for cruising and high-speed at a high power coefficient for propeller with extension.

PROPELLERS - TRAILING EDGE, EXTENDED↗
NASA NTRS1999

Enzymes and other agents that enhance cell wall extensibility

Polysaccharides and proteins are secreted to the inner surface of the growing cell wall, where they assemble into a network that is mechanically strong, yet remains extensible until the cells cease growth. This review focuses on the agents that directly or indirectly enhance the extensibility properties of growing walls. The properties of expansins, endoglucanases, and xyloglucan transglycosylases are reviewed and their postulated roles in modulating wall extensibility are evaluated. A summary model for wall extension is presented, in which expansin is a primary agent of wall extension, whereas endoglucanases, xyloglucan endotransglycosylase, and other enzymes that alter wall structure act secondarily to modulate expansin action.

NASA Discipline Plant Biology↗
NASA NTRS1992

Two endogenous proteins that induce cell wall extension in plants

Plant cell enlargement is regulated by wall relaxation and yielding, which is thought to be catalyzed by elusive "wall-loosening" enzymes. By employing a reconstitution approach, we found that a crude protein extract from the cell walls of growing cucumber seedlings possessed the ability to induce the extension of isolated cell walls. This activity was restricted to the growing region of the stem and could induce the extension of isolated cell walls from various dicot stems and the leaves of amaryllidaceous monocots, but was less effective on grass coleoptile walls. Endogenous and reconstituted wall extension activities showed similar sensitivities to pH, metal ions, thiol reducing agents, proteases, and boiling in methanol or water. Sequential HPLC fractionation of the active wall extract revealed two proteins with molecular masses of 29 and 30 kD associated with the activity. Each protein, by itself, could induce wall extension without detectable hydrolytic breakdown of the wall. These proteins appear to mediate "acid growth" responses of isolated walls and may catalyze plant cell wall extension by a novel biochemical mechanism.

Non-NASA Center↗
NASA NTRS1988

Salinity stress inhibits bean leaf expansion by reducing turgor, not wall extensibility

Treatment of bean (Phaseolus vulgaris L.) seedlings with low levels of salinity (50 or 100 millimolar NaCl) decreased the rate of light-induced leaf cell expansion in the primary leaves over a 3 day period. This decrease could be due to a reduction in one or both of the primary cellular growth parameters: wall extensibility and cell turgor. Wall extensibility was assessed by the Instron technique. Salinity did not decrease extensibility and caused small increases relative to the controls after 72 hours. On the other hand, 50 millimolar NaCl caused a significant reduction in leaf bulk turgor at 24 hours; adaptive decreases in leaf osmotic potential (osmotic adjustment) were more than compensated by parallel decreases in xylem tension potential and the leaf apoplastic solute potential, resulting in a decreased leaf water potential. It is concluded that in bean seedlings, mild salinity initially affects leaf growth rate by a decrease in turgor rather than by a reduction in wall extensibility. Moreover, long-term salinization (10 days) resulted in an apparent mechanical adjustment, i.e. an increase in wall extensibility, which may help counteract reductions in turgor and maintain leaf growth rates.

NASA Discipline Number 40-10↗
NASA NTRS1990

Cooled artery extension

An artery vapor trap. A heat pipe artery is constructed with an extension protruding from the evaporator end of the heat pipe beyond the active area of the evaporator. The vapor migrates into the artery extension because of gravity or liquid displacement, and cooling the extension condenses the vapor to liquid, thus preventing vapor lock in the working portion of the artery by removing vapor from within the active artery. The condensed liquid is then transported back to the evaporator by the capillary action of the artery extension itself or by wick located within the extension.

Gernert, Nelson J.↗
DOE OSTI2020

Theory and Practice in Measuring In-Vitro Extensibility of Growing Plant Cell Walls

This chapter summarizes four extensometer techniques for measuring cell wall extensibility in vitro and discusses how the results of these methods relate to the concept and ideal measurement of cell wall extensibility in the context of plant cell growth. These in-vitro techniques are particularly useful for studies of the molecular basis of cell wall extension. Measurements of breaking strength, elastic compliance and plastic compliance may be informative about changes in cell wall structure, whereas measurements of wall stress relaxation and creep are sensitive to both changes in wall structure and wall-loosening processes, such as those mediated by expansins and some lytic enzymes. As a result, a combination of methods is needed to obtain a broader view of cell wall behavior and properties connected with the concept of cell wall extensibility.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Added value of site load measurements in probabilistic lifetime extension: a Lillgrund case study

Site-specific fatigue estimation is an essential part of wind turbine lifetime extension, with various methods depending on data availability. The present study compares probabilistic lifetime extension assessment results for rotor blades with and without load measurements. It also addresses two key questions in such assessments: the applicability of the Frandsen model for estimating waked turbulence under complex and mixed wake conditions and the extrapolation of mid-term data over longer time periods. The case study wind turbine is SWT-2.3-93, located at the edge of the Lillgrund wind farm, situated in the Øresund Strait between Denmark and Sweden. The turbine is extensively instrumented, with 5 years of data available from its supervisory control and data acquisition (SCADA) system. Although the Frandsen turbulence estimates deviate in a different manner from measurements at below- and above-rated mean wind speeds, the model remains a conservative approach for fatigue load prediction and reliability. In the current case study, the site-specific assessment using strain gauge measurements yields a 33 % higher annual fatigue reliability index after 35 years compared to a scenario based on the Frandsen estimation combined with ambient environmental data and a generic aeroelastic model. The results also demonstrate that the sensitivity of fatigue reliability to load uncertainty is negligible when load measurements are used directly but relatively high when relying on the Frandsen model in combination with a generic aeroelastic model. Overall, the high variability of the lifetime extension in different scenarios of data availability and accuracy shows the importance and added value of high-quality measurements combined with wind-farm-level SCADA and a model updated in real time (digital twins).

17 WIND ENERGY↗
DOE OSTI2021

Simulations of crack extensions in arc-shaped tension specimens of uncharged and hydrogen-charged 21-6-9 austenitic stainless steels using cohesive zone modeling with varying cohesive parameters

Crack extensions in uncharged and hydrogen-charged side-grooved A(T) specimens of conventionally forged 21-6-9 austenitic stainless steels are simulated using the cohesive zone modeling approach. Two-dimensional plane strain finite element analyses with fixed cohesive parameters are first conducted to fit the experimental load-displacement curves. Similar analyses using varying cohesive parameters as functions of the crack extension are then conducted to fit the experimental load-crack extension and crack extension-displacement curves. The computational results with varying cohesive parameters can fit very well the experimental data. The computational results also indicate that the average cohesive energy for the hydrogen-charged A(T) specimen is lower than that for the uncharged A(T) specimen.

42 ENGINEERING↗
DOE OSTI2018

Unexpected compositional and structural modification of CoPt 3 nanoparticles by extensive surface purification

We combined synchrotron small angle X-ray scattering, X-ray fluorescence and extended X-ray absorption fine structure spectroscopy to probe the structure of chemically synthesized CoPt 3 nanoparticles (NPs) after ligand removal via the commonly accepted solvent/nonsolvent approach. We showed that the improved catalytic activity of extensively purified NPs could not be explained only in terms of a “cleaner” surface. We found that extensive surface purification results in the substantial leaching of the Co atoms from the chemically synthesized CoPt 3 NPs transforming them into CoPt 3 /Pt core/shell structures with an unexpectedly thick (~0.5 nm) Pt shell. We indicated that the improved catalytic activity of extensively purified NPs in octyne hydrogenation reaction can be explained by the formation of CoPt 3 /Pt core/shell structures. Also, we demonstrated that drastic compositional and structural transformation of water transferred CoPt 3 NPs was rather a result of extensive removal of native ligands via a solvent/nonsolvent approach than leaching of cobalt atoms in aqueous media. We expect that these findings can be relevant to other transition metal based multicomponent NPs.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Strain rate dependent nanostructure of hydrogels with reversible hydrophobic associations during uniaxial extension

An energy dissipation mechanism during deformation is required to impart toughness to hydrogels. Here we describe how in situ small angle X-ray scattering (SAXS) provides insight into possible energy dissipation mechanisms for a tough hydrogel based on an amphiphilic copolymer where nanoscale associations of the hydrophobic moieties act as effective crosslinks. The mechanical properties of the hydrogels are intimately coupled with the nanostructure that provides reversible crosslinks and evolves during deformation. As the extension rate increases, more mechanical energy is dissipated from rearrangements of the crosslinks. The scattering is consistent with hopping of hydrophobes between the nanoscale aggregates as the primary rearrangement mechanism. This rearrangement changes the network conformation that leads to non-affine deformation, where the change in the nanostructure dimension from SAXS is less than 15% of the total macroscopic strain. These nanostructure changes are rate dependent and correlated with the relaxation time of the hydrogel. At low strain rate (0.15% s -1 ), no significant change of the nanostructure was observed, whereas at higher strain rates (1.5% s -1 and 8.4% s -1 ) significant nanostructure anisotropy occurred during extension. These differences are attributed to the ability for the network chains to rearrange on the time scale of the deformation; when the characteristic time for extension is longer than the average segmental relaxation time, no significant change in nanostructure occurs on uniaxial extension. These results illustrate the importance of strain rate in the mechanical characterization and consideration of relaxation time in the design of tough hydrogels with reversible crosslinks.

36 MATERIALS SCIENCE↗