Results for “factor separation” — Page 4

NASA NTRS2002

Estimating the Single-Trial Characteristics of Event-Related Responses: Evaluation of the MCERP Algorithm

Single-trial event-related responses collected during the course of an experiment are typically averaged before analysis resulting in a rather crude picture of event-related brain dynamics. It has been quite clear for some time that these responses exhibit trial-to-trial variability: however, the computational techniques necessary to deal with such responses in noisy conditions have not been available. To this end we have developed the multiple-component, event-related potential model (mcERP), which assumes that the each event-related response consists of a sum of multiple evoked components each described by a stereotypical waveshape. These waveshapes are allowed to vary in amplitude and onset latency from trial to trial, which allows us to capture, to first-order, the trial-dependent variations in event-related brain dynamics. We have constructed many sets of synthetic data designed to simulate intracortical recordings from a 15 channel, linear-array multielectrode implanted acutely in V1 of an awake-behaving macaque undergoing visual stimulation with a red light flash. This synthetic data was used to characterize the performance of the mcERP algorithm. First we quantified the degree to which such trial-to-trial variability aids in the identification of multiple components, and we demonstrate that amplitude variability is a more important factor in component separation than latency variability. Second, we quantified the behavior of the algorithm under two distinct signal-to-noise ratio (SNR) conditions: Gaussian noise independently present in each channel, and highly correlated (1/f distributed), far-field noise presented identically in each channel of the array. The mcERP algorithm was found to be robust to noise accurately identifying all component waveshapes and their associated single-trial characteristics down to SNR levels of -20dB for Gaussian noise and -7dB for 1/f far-field noise. Comparisons of the performance of this algorithm with factor analysis (FA) and independent component analysis (ICA) will be described by Knuth et al. (SFN abstracts, 2002). In addition, the advantages of application of mcERP to real data will be described by Shah et al, (these abstracts, 2002: SFN abstracts, 2002).

Knuth, K. H.↗

NASA NTRS1977

Transverse shear effects on the stress-intensity factor for a circumferentially cracked, specially orthotropic cylindrical shell

The problem of a cylindrical shell containing a circumferential through crack is considered by taking into account the effect of transverse shear deformations. The formulation is given for a specially orthotropic material within the confines of a linearized shallow shell theory. The particular theory used permits the consideration of all five boundary conditions regarding moment and stress resultants on the crack surface. Consequently, aside from multiplicative constants representing the stress intensity factors, the membrane and bending components of the asymptotic stress fields near the crack tip are found to be identical. The stress intensity factors are calculated separately for a cylinder under a uniform membrane load, and that under a uniform bending moment. Sample results showing the nature of the out-of-plane crack surface displacement and the effect of the Poisson's ratio are presented.

Delale, F.↗

NASA NTRS1985

The Scaling of Coronal Models from One Star to Another

The requirements that must be met in order that stationary numerical corona models can be scaled from one star to another are discussed. A corona model is a solution of the conservation equations for mass, momentum, and energy, subject to appropriate boundary conditions, and of the equation of state. In general, the mass M and radius R of the star enter these equations and boundary conditions as free parameters. A given solution can be scaled to other stars only if all equations can be rewritten in such a form that M and R do no longer appear explicitly as free parameters, but only implicitly as scaling factors of the variables. An adequate means to find these scaling factors is a homologous transformation: one multiplies all variables and parameters by separate constants (i.e., scaling factors) and requires that the equations and boundary conditions remain valid. This leads to a set of nonlinear relations between the transformation constants. Only if in this set the two constants associated with M and R can be chosen independently, can a given numerical corona model be scaled to arbitrary stars.

Hammer, R.↗

NASA NTRS1984

Rationale for two phase polymer system microgravity separation experiments

The two-phase systems that result when aqueous solutions of dextran and poly(ethylene glycol) are mixed at concentrations above a few percent are discussed. They provide useful media for the partition and isolation of macromolecules and cell subpopulations. By manipulating their composition, separations based on a variety of molecular and surface properties are achieved, including membrane hydrophobic properties, cell surface charge, and membrane antigenicity. Work on the mechanism of cell partition shows there is a randomizing, nonthermal energy present which reduces separation resolution. This stochastic energy is probably associated with hydrodynamic interactions present during separation. Because such factors should be markedly reduced in microgravity, a series of shuttle experiments to indicate approaches to increasing the resolution of the procedure are planned.

Brooks, D. E.↗

NASA NTRS1986

Investigation of porous polymer gas chromatographic packings for atmospheric analysis of extraterrestrial bodies

Measurement of the permanent gases in the atmospheres of mission targets is a major objective. A 16 meter long Porapak N column was used on the Venus probe and required a rather high carrier gas flow rate. The researchers have, therefore, surveyed commercial porous polymer types which had some ability to resolve nitrogen, oxygen, argon and carbon monoxide gases. Porapaks N and Q appeared superior to most. Batch to batch variation, however, was quite wide, so the researchers learned how to synthesize porous polymer and investigated some of the factors affecting the separations. A polymer was synthesized which was superior to all commercial products and allowed at least a 50% reduction in length and flow rate of carrier gas. Similar studies were made concerning the separation of hydrocarbons and new porous polymers have been synthesized which represent significant improvements in time of analysis, column, and carrier gas flow rate.

Pollock, G. E.↗

NASA NTRS2000

"Do That Again": Evaluating Spoken Dialogue Interfaces

We present a new technique for evaluating spoken dialogue interfaces that allows us to separate the dialogue behavior from the rest of the speech system. By using a dialogue simulator that we have developed, we can gather usability data on the system s dialogue interaction and behaviors that can guide improvements to the speech interface. Preliminary testing has shown promising results, suggesting that it is possible to test properties of dialogue separately from other factors such as recognition quality.

James, Frankie↗

NASA NTRS2000

Dissociation of muscle sympathetic nerve activity and leg vascular resistance in humans

We examined the hypothesis that the increase in inactive leg vascular resistance during forearm metaboreflex activation is dissociated from muscle sympathetic nerve activity (MSNA). MSNA (microneurography), femoral artery mean blood velocity (FAMBV, Doppler), mean arterial pressure (MAP), and heart rate (HR) were assessed during fatiguing static handgrip exercise (SHG, 2 min) followed by posthandgrip ischemia (PHI, 2 min). Whereas both MAP and MSNA increase during SHG, the transition from SHG to PHI is characterized by a transient reduction in MAP but sustained elevation in MSNA, facilitating separation of these factors in vivo. Femoral artery vascular resistance (FAVR) was calculated (MAP/MBV). MSNA increased by 59 +/- 20% above baseline during SHG (P < 0.05) and was 58 +/- 18 and 78 +/- 18% above baseline at 10 and 20 s of PHI, respectively (P < 0.05 vs. baseline). Compared with baseline, FAVR increased 51 +/- 22% during SHG (P < 0.0001) but returned to baseline levels during the first 30 s of PHI, reflecting the changes in MAP (P < 0.005) and not MSNA. It was concluded that control of leg muscle vascular resistance is sensitive to changes in arterial pressure and can be dissociated from sympathetic factors.

Non-NASA Center↗

NASA NTRS2006

Wake Vortex Research in the USA (WakeNet-USA)

This viewgraph presentation reviews the cooperative work that FAA and NASA are engaged in to safely increase the capacity of the National Airspace System by studying the wake vortex operations. Wake vortex avoidance is a limiting factor in defining separation standards in the airport terminal area and could become a reducing separation standards in en route airspace.

Lang, Steve↗

NASA NTRSDate not supplied

Payload Fairing Acoustic Trade Study: Fill Effect Modeling

A review of acoustic fill effect was conducted using vibroacoustic models of the NASA Space Launch System Block 1B 8.4-meter Payload Fairing. Fill effect is the term used to describe how sound pressure levels (SPLs) inside of a launch vehicle’s payload cavity change when a payload is present, compared to that of an unfilled cavity. Several vibroacoustic models with various payload shapes were developed and the deviation in output from an unfilled cavity model were compared to an analytical fill effect calculation. The analytical expression for the fill effect correction factor, known as the fill factor, is published in NASA-STD-7001B. The development and validation of the NASA fill factor is discussed to provide context for this study and define important variables including the volume fill percentage and the fairing-payload separation gap. The fill factor is reviewed from two perspectives; a global perspective which defines the volume ratio with respect to the entire fairing cavity, and a local perspective which defines the volume ratio with respect to a zone of interest dependent on the payload’s height. The global perspective was considered because it allows a decoupling of the volume ratio and fairing-payload separation gap variables. Both the global and local fill factor methods have difficulty capturing low frequency SPL because of a breakdown in the underlying assumptions of a diffuse acoustic field. Spatial variation in the pressure field at low frequency showed that axially oriented standing waves may be of concern for sensitive payload components; radial variation in SPL was found to be less significant. Further, a novel secondary derivation of the theoretical fill factor is posed for future work in which the absorption characteristics of the payload and fairing surfaces are considered. This work is supported by the NASA Glenn Research Center and the Space Launch System Payload Fairing Working Group.

Spacecraft environments↗

NASA NTRS2021

Separation at Crossing Waypoints Under Wind Uncertainty in Urban Air Mobility

To enable high-density operations in major metropolitan areas, urban air mobility networks are anticipated to have air traffic management with higher levels of autonomy. To ensure that this type of autonomy is feasible, one of the critical steps from a safety and efficiency perspective is understanding various factors that affect the spatial separation between airborne flights and ensure that these factors can be managed. In terms of separation assurance and scheduling, an important real-world concern is that future states of aircraft cannot be perfectly predicted. The focus of this research paper is to understand how these prediction errors affect separation and scheduling services and to explore mitigation strategies to handle these errors. In this research, we have simulated these types of uncertainty by adding wind-prediction errors to trajectory predictions for separation. With these wind-prediction errors, we decompose the problem into two separate questions. First, using both simulation and analytical methods, we look at conflict-detection-only scenarios to understand how the wind errors affect required minimum temporal separation between crossing flights to ensure a specific spatial separation. Next, we study how trajectory errors effect conflict resolution, and we explore different combinations of scheduling and separation assurance to mitigate the effects of uncertainty between crossing flights. The conflict resolution algorithm aims to minimize necessary temporal separation between crossing flights under uncertainty, still ensuring safety-critical spatial separation. In summary, this research suggests that the required minimum temporal separation at a crossing waypoint is dependent on factors such as inbound crossing angle, the relative angle between wind direction and bearing of each route, wind magnitude, wind magnitude uncertainty, nominal cruise airspeed of aircraft, and look-ahead time of the conflict detection algorithm. This research also suggests that different combinations of scheduling and separation have different qualitative results. Using a combination of strategic, flow-based scheduling, tactical scheduling at crossings, speed control near crossing points, and separation management leads to a system that is insensitive to trajectory prediction errors with high throughput and flexibility for aircraft away from shared resources.

urban air mobility↗

NASA NTRS2021

Separation at Crossing Waypoints Under Wind Uncertainty in Urban Air Mobility

To enable high-density operations in major metropolitan areas, urban air mobility networks are anticipated to have air traffic management with higher levels of autonomy. To ensure that this type of autonomy is feasible, one of the critical steps from a safety and efficiency perspective is understanding various factors that affect the spatial separation between airborne flights and ensure that these factors can be managed. In terms of separation assurance and scheduling, an important real-world concern is that future states of aircraft cannot be perfectly predicted. The focus of this research paper is to understand how these prediction errors affect separation and scheduling services and to explore mitigation strategies to handle these errors. In this research, we have simulated these types of uncertainty by adding wind-prediction errors to trajectory predictions for separation. With these wind-prediction errors, we decompose the problem into two separate questions. First, using both simulation and analytical methods, we look at conflict-detection-only scenarios to understand how the wind errors affect required minimum temporal separation between crossing flights to ensure a specific spatial separation. Next, we study how trajectory errors effect conflict resolution, and we explore different combinations of scheduling and separation assurance to mitigate the effects of uncertainty between crossing flights. The conflict resolution algorithm aims to minimize necessary temporal separation between crossing flights under uncertainty, still ensuring safety-critical spatial separation. In summary, this research suggests that the required minimum temporal separation at a crossing waypoint is dependent on factors such as inbound crossing angle, the relative angle between wind direction and bearing of each route, wind magnitude, wind magnitude uncertainty, nominal cruise airspeed of aircraft, and look-ahead time of the conflict detection algorithm. This research also suggests that different combinations of scheduling and separation have different qualitative results. Using a combination of strategic, flow-based scheduling, tactical scheduling at crossings, speed control near crossing points, and separation management leads to a system that is insensitive to trajectory prediction errors with high throughput and flexibility for aircraft away from shared resources.

urban air mobility↗

NASA NTRS2011

Trajectory-Based Complexity (TBX): A Modified Aircraft Count to Predict Sector Complexity During Trajectory-Based Operations

In this paper we introduce a new complexity metric to predict -in real-time- sector complexity for trajectory-based operations (TBO). TBO will be implemented in the Next Generation Air Transportation System (NextGen). Trajectory-Based Complexity (TBX) is a modified aircraft count that can easily be computed and communicated in a TBO environment based upon predictions of aircraft and weather trajectories. TBX is scaled to aircraft count and represents an alternate and additional means to manage air traffic demand and capacity with more consideration of dynamic factors such as weather, aircraft equipage or predicted separation violations, as well as static factors such as sector size. We have developed and evaluated TBX in the Airspace Operations Laboratory (AOL) at the NASA Ames Research Center during human-in-the-loop studies of trajectory-based concepts since 2009. In this paper we will describe the TBX computation in detail and present the underlying algorithm. Next, we will describe the specific TBX used in an experiment at NASA's AOL. We will evaluate the performance of this metric using data collected during a controller-inthe- loop study on trajectory-based operations at different equipage levels. In this study controllers were prompted at regular intervals to rate their current workload on a numeric scale. When comparing this real-time workload rating to the TBX values predicted for these time periods we demonstrate that TBX is a better predictor of workload than aircraft count. Furthermore we demonstrate that TBX is well suited to be used for complexity management in TBO and can easily be adjusted to future operational concepts.

trajectories↗

NASA NTRSDate not supplied

Define Minimum Safe Operational Volume for Aerial Vehicles in Upper Class E Airspace

The variety of vehicle performance in upper Class E airspace requires a method that can efficiently compute the minimum safe operational boundary between aircraft. This work presents a mathematical method to define the minimum safe operational boundary needed for aerial vehicles operating in upper Class E airspace. This method focuses on the extra separation required by vehicle maneuverability, communication delay, and control/operator response time. A sensitivity study is then performed to provide a general understanding of the impact of these factors on the extra separation needed. Experiments with pairwise encounters are conducted to verify the results generated by the proposed methods.

Separation standard↗

NASA NTRSDate not supplied

Define Minimum Safe Operational Volume for Aerial Vehicles in Upper Class E Airspace

The variety of vehicle performance in upper Class E airspace requires a method that can efficiently compute the minimum safe operational boundary between aircraft. This work presents a mathematical method to define the minimum safe operational boundary needed for aerial vehicles operating in upper Class E airspace. This method focuses on the extra separation required by vehicle maneuverability, communication delay, and control/operator response time. A sensitivity study is then performed to provide a general understanding of the impact of these factors on the extra separation needed. Experiments with pairwise encounters are conducted to verify the results generated by the proposed methods.

Separation↗

NASA NTRS1986

Upwind Navier-Stokes solutions for separated periodic flows

The application of an upwind implicit approximate factorization Navier-Stokes algorithm to highly separated flow is described. Using both the thin-layer and complete forms of the Navier-Stokes equations, the low Reynolds number laminar flow around a circular cylinder with periodic shedding is solved. The effect of grid density, grid extent, and time step on the Strouhal number is shown. Results from both sets of equations agree within the experimental data band. Unsteady, laminar flow computations around inclined plates and separated airfoils are also described. Strouhal numbers agree to within 5 percent of experiments for inclined plates. Differences between the complete equations and the thin-layer approximation for separated periodic flows are discussed. Computations of an impulsively started circular cylinder and airfoil yield time-accurate flowfield shapes in good agreement with experimental flow visualizations. The turbulent computation of an airfoil at a high angle-of-attack is massively separated, but shows no evidence of periodicity.

Rumsey, C. L.↗

NASA NTRS1985

An analysis of a separation bubble transition criterion at low Reynolds numbers

Factors which influence the criterion governing the length of the laminar region of a separation bubble on an airfoil at low Re were investigated. The criterion is the onset of separation when a critical Re value is surpassed. Wind tunnel data were gathered for the flow around a NACA 66(3)-018 airfoil at Re from 50,000-200,000. The data were taken with either hot-wire anemometers or pressure taps. The value of the critical Re was influenced by the chord Re, the angle of attack and the level of turbulence in the free stream. However, the turbulence levels examined, up to 0.184 percent, did not greatly affect the critical Re. Further characterizations of the effects of the three factors on the critical Re are necessary before the important features of separation bubbles can be identified with an acceptable level of certainty.

Schmidt, G. S.↗

NASA NTRS1995

Eliminating Flow Separation and Reducing Viscous Drag Through Boundary Layer Analysis and Manipulation

As both computers and flow-analyzing equations have increased in sophistication, Computational Fluid Dynamics (CFD) has evolved into a fixture for advanced aircraft design. While CFD codes have improved in accuracy and efficiency, their ability to encompass viscous effects is lacking in certain areas. For example, current CFD codes cannot accurately predict or correct for the increased drag due to these viscous effects at some flow conditions. However, by analyzing an airfoil's turbulent boundary layer, one can predict not only flow separation via the shape factor parameter, but also viscous drag via the momentum thickness. Various codes have been written which can calculate turbulent boundary layer parameters. The goal of my research is to develop procedures for modifying an airfoil (via its local pressure distribution) to eliminate boundary layer separation and/or to reduce viscous drag. The modifications to the local pressure distribution necessary to achieve these objectives will be determined using a direct-iterative method installed into a turbulent boundary layer analyzer. Furthermore, the modifications should preserve the basic characteristics of the original airfoil.

Oser, Matthew D.↗

NASA NTRS2003

Predictions of Separated and Transitional Boundary Layers Under Low-Pressure Turbine Airfoil Conditions Using an Intermittency Transport Equation

A new transport equation for the intermittency factor was proposed to predict separated and transitional boundary layers under low-pressure turbine airfoil conditions. The intermittent behavior of the transitional flows is taken into account and incorporated into computations by modifying the eddy viscosity, t , with the intermittency factor, y. Turbulent quantities are predicted by using Menter s two-equation turbulence model (SST). The intermittency factor is obtained from a transport equation model, which not only can reproduce the experimentally observed streamwise variation of the intermittency in the transition zone, but also can provide a realistic cross-stream variation of the intermittency profile. In this paper, the intermittency model is used to predict a recent separated and transitional boundary layer experiment under low pressure turbine airfoil conditions. The experiment provides detailed measurements of velocity, turbulent kinetic energy and intermittency profiles for a number of Reynolds numbers and freestream turbulent intensity conditions and is suitable for validation purposes. Detailed comparisons of computational results with experimental data are presented and good agreements between the experiments and predictions are obtained.

Suzen, Y. B.↗