Search NASA⌕ Search

SEARCH · Search NASA

Results for “fault-tolerant control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

LLRF System Analysis for the Fermilab PIP-II LINAC

Developing long-lived quantum processing units (QPUs) capable of supporting high-fidelity quantum operations is a crucial challenge on the path toward fault-tolerant quantum computing. TESLA-shaped superconducting RF (SRF) cavities, known for photon relaxation times on the order of seconds, provide an excellent foundation for 3D QPUs and quantum memory. This talk presents a novel design that leverages TESLA cavity modes coupled to ancillary transmon qubits, optimized to preserve coherence and control. By carefully engineering the package geometry, optimizing Hamiltonian parameters, and minimizing lossy participation ratios, we achieve photon relaxation times of over 16 ms and 20 ms for the two cavity modes, representing a significant improvement over previous multimode quantum memories. Despite the reduced coupling between the qubit and cavity modes, which is necessary to preserve long lifetimes, the platform supports robust and universal control schemes that are not limited by low coupling strength. We will also discuss how this architecture can lead to scalable, modular quantum computing systems.

Varghese, P. [Fermilab]↗
NASA NTRS1981

Development of a fault-tolerant microprocessor based computer system for space flight

A methodology for the design of a tightly coupled, highly reliable microprocessor based computer system is described. The concept of triple modular redundancy with sparing is used. The notion of synchronizing by using a single crystal oscillator is examined. The use of decoders to replace voters is also used. The decoders not only isolate the failed module but also allow error identification to be accomplished. Each module is to have its own RAM memory. The necessary circuitry to select a correct memory and the corresponding DMA controller was designed.

Montgomery, V. T.↗
NASA NTRS1976

Analysis of the survivability of the shuttle (ALT) fault-tolerant avionics system

An extension of the Complementary-Analytic-Simulative Technique (CAST) is presented which is applicable to the Shuttle Data Processing Subsystem (DPS). A two step process was used. The first step provides models, both analytic and simulative, for analysis of the Approach-Landing Test (ALT) configuration. The ALT modeling and analysis are presented. Since CAST had already been shown to be multicomputer systems, the emphasis was placed on extending the CAST concept so it is applicable to computer systems including the multiplicity of input and output devices found in a real-time control system application. The DPS mission-critical survivability for a six-hour mission was determined to be 0.999863 for the Shuttle ALT baseline configuration. Thus it can be said that for ALT, the survivability is adequate. However, the fact that orbiting missions of up to 30 days are planned illustrates the necessity of extending the ALT work to be applicable to OFT and actual mission scenarios. The above analysis led to the evaluation of three selected options which identified two areas of possible improvement. These improvements would result from use of a recovery technique which combines roll ahead with memory copy, and increased TACAN fault detectability.

Source record↗
NASA NTRS1985

Computers in Aerospace Conference, 5th, Long Beach, CA, October 21-23, 1985, Technical Papers

Among the topics discussed are: access control models for a distributed CAIS-conforming system; a knowledge-based advisory system for casualty procedures; and automated interactive simulation modeling system. Consideration is also given to: reusable software concepts and software development methodologies; the electronic device aspects of neutral network memories; an expert system for automated satellite anomaly resolution; and the use of automatic programming techniques for fault-tolerant computing systems. Among additional topics discussed are: systems approaches to software fault tolerance; a Space Shuttle navigation validation system; and a vision-based road following system for an autonomous land vehicle.

Source record↗
NASA NTRS1972

Autonomous power subsystem design for an Outer Planet Spacecraft.

This paper describes the overall design of the Thermoelectric Outer Planet Spacecraft (TOPS) power subsystem. It discusses the implementation of spacecraft requirements into a fault-tolerant design in which an on-board self-test and repair computer is utilized to provide autonomous operation. Development of a protected bus concept is discussed whereby electrical power supplied to essential spacecraft loads is maintained in the event of major on-board power blackouts. Particular attention is given to describing the interfaces and operation of the power subsystem with the spacecraft control computer subsystem. Autonomous power management operations are discussed where the on-board computer adjusts the spacecraft load demand to provide maximum utilization of source power for a given mission mode.

Andrews, R. E.↗
NASA NTRS1976

Reliability and coverage analysis of non-repairable fault-tolerant memory systems

A method was developed for the construction of probabilistic state-space models for nonrepairable systems. Models were developed for several systems which achieved reliability improvement by means of error-coding, modularized sparing, massive replication and other fault-tolerant techniques. From the models developed, sets of reliability and coverage equations for the systems were developed. Comparative analyses of the systems were performed using these equation sets. In addition, the effects of varying subunit reliabilities on system reliability and coverage were described. The results of these analyses indicated that a significant gain in system reliability may be achieved by use of combinations of modularized sparing, error coding, and software error control. For sufficiently reliable system subunits, this gain may far exceed the reliability gain achieved by use of massive replication techniques, yet result in a considerable saving in system cost.

Cox, G. W.↗
NASA NTRS1984

Space station - Technology development

The NASA manned space station program's systems technology effort involves the development of novel techniques that will reduce the scope of tasks neeeded for design, development, testing and evaluation of the hardware. Operations technology efforts encompass analyses that will define those techniques best able to improve the efficiency and reduce the costs of space station functions. The technology objective for data management calls for a fault-tolerant, distributed, expandable and adaptable, as well as repairable and user-friendly, flight data management system that employs state-of-the-art hardware and software. The space station's power system includes the largest element, a 'solar blanket', and the heaviest component, the batteries, of all the subsystems. A thermal management system for the power system is of paramount importance. Attention is also given to the exacting demands of attitude control and stabilization and a regenerative life support system of the requisite capacity and reliability.

Carlisle, R. F.↗
NASA NTRS1976

The unified data system - A distributed processing network for control and data handling on a spacecraft

This paper presents the results obtained in a continuing investigation of real-time distributed processing systems which is being conducted at the Jet Propulsion Laboratory. A distributed processor architecture has been developed for control and data handling on a planetary spacecraft. This system, designated the Unified Data System, has been implemented in a feasibility breadboard. The following aspects of the Unified Data System are described: (1) standardized building block elements and their configuration into microprocessor modules, (2) a highly redundant bus structure which connects the various modules and facilitates intercommunications with minimal software support, (3) the structure of software within the individual modules and its coordination between modules, and (4) the mechanisms by which fault-tolerance can be implemented within the network. Through the attributes of multilevel standardization, simplicity, and flexibility, this system is expected to result in significant cost savings to future spacecraft missions.

Rennels, D. A.↗
NASA NTRS1971

Logic design for dynamic and interactive recovery.

Recovery in a fault-tolerant computer means the continuation of system operation with data integrity after an error occurs. This paper delineates two parallel concepts embodied in the hardware and software functions required for recovery; detection, diagnosis, and reconfiguration for hardware, data integrity, checkpointing, and restart for the software. The hardware relies on the recovery variable set, checking circuits, and diagnostics, and the software relies on the recovery information set, audit, and reconstruct routines, to characterize the system state and assist in recovery when required. Of particular utility is a handware unit, the recovery control unit, which serves as an interface between error detection and software recovery programs in the supervisor and provides dynamic interactive recovery.

Carter, W. C.↗
NASA NTRS1973

Highly reliable processor system for space application.

Description of a redundant processor organization which can be implemented with off-the-shelf processors for fault-tolerant operation. Reconfiguration can be performed automatically in a transientless manner. To support this system configuration and redundancy management concept, an operating system referred to as a synchronous executive has been designed. This system is directed at real-time closed-loop space applications where minimum response time, no degradation of software solution, and system simplicity are of importance. The system is based on a multicomputer organization with each machine solving the same problem based on a common set of inputs. Processor status is fed to a higher-level device which selects a controlling processor for controlling outputs and monitoring computers for fault detection.

Tsou, H. S. E.↗
DOE OSTI2024

Modular Quantum Processor with an All-to-All Reconfigurable Router

Superconducting qubits provide a promising approach to large-scale fault-tolerant quantum computing. However, qubit connectivity on a planar surface is typically restricted to only a few neighboring qubits. Achieving longer-range and more flexible connectivity, which is particularly appealing in light of recent developments in error-correcting codes, however, usually involves complex multilayer packaging and external cabling, which is resource intensive and can impose fidelity limitations. Here, we propose and realize a high-speed on-chip quantum processor that supports reconfigurable all-to-all coupling with a large on-off ratio. We implement the design in a four-node quantum processor, built with a modular design comprising a wiring substrate coupled to two separate qubit-bearing substrates, each including two single-qubit nodes. We use this device to demonstrate reconfigurable controlled-𝑍 gates across all qubit pairs, with a benchmarked average fidelity of 96.00% ± 0.08% and best fidelity of 97.14% ± 0.07%, limited mainly by dephasing in the qubits. We also generate multiqubit entanglement, distributed across the separate modules, demonstrating GHZ-3 and GHZ-4 states with fidelities of 88.15% ± 0.24% and 75.18% ± 0.11%, respectively. This approach promises efficient scaling to larger-scale quantum circuits and offers a pathway for implementing quantum algorithms and error-correction schemes that benefit from enhanced qubit connectivity.

Quantum circuits↗
DOE OSTI2025

Geometric Structure and Transversal Logic of Quantum Reed–Muller Codes

Designing efficient and noise-tolerant quantum computation protocols generally begins with an understanding of quantum error-correcting codes and their native logical operations. The simplest class of native operations are transversal gates, which are naturally fault-tolerant. Here, in this paper, we aim to characterize the transversal gates of quantum Reed–Muller (RM) codes by exploiting the well-studied properties of their classical counterparts. We start our work by establishing a new geometric characterization of quantum RM codes via the Boolean hypercube and its associated subcube complex. More specifically, a set of stabilizer generators for a quantum RM code can be described via transversal X and Z operators acting on subcubes of particular dimensions. This characterization leads us to define subcube operators composed of single-qubit π/2 k Z -rotations that act on subcubes of given dimensions. We first characterize the action of subcube operators on the code space: depending on the dimension of the subcube, these operators either (1) act as a logical identity on the code space, (2) implement non-trivial logic, or (3) rotate a state away from the code space. Second, and more remarkably, we uncover that the logic implemented by these operators corresponds to circuits of multi-controlled-Z gates that have an explicit and simple combinatorial description. Overall, this suite of results yields a comprehensive understanding of a class of natural transversal operators for quantum RM codes.

Reed–Muller (RM) codes↗
NASA NTRS1978

Critical fault patterns determination in fault-tolerant computer systems

The method proposed tries to enumerate all the critical fault-patterns (successive occurrences of failures) without analyzing every single possible fault. The conditions for the system to be operating in a given mode can be expressed in terms of the static states. Thus, one can find all the system states that correspond to a given critical mode of operation. The next step consists in analyzing the fault-detection mechanisms, the diagnosis algorithm and the process of switch control. From them, one can find all the possible system configurations that can result from a failure occurrence. Thus, one can list all the characteristics, with respect to detection, diagnosis, and switch control, that failures must have to constitute critical fault-patterns. Such an enumeration of the critical fault-patterns can be directly used to evaluate the overall system tolerance to failures. Present research is focused on how to efficiently make use of these system-level characteristics to enumerate all the failures that verify these characteristics.

Mccluskey, E. J.↗
NASA NTRS1981

A tutorial on the CARE III approach to reliability modeling

The CARE 3 reliability model for aircraft avionics and control systems is described by utilizing a number of examples which frequently use state-of-the-art mathematical modeling techniques as a basis for their exposition. Behavioral decomposition followed by aggregration were used in an attempt to deal with reliability models with a large number of states. A comprehensive set of models of the fault-handling processes in a typical fault-tolerant system was used. These models were semi-Markov in nature, thus removing the usual restrictions of exponential holding times within the coverage model. The aggregate model is a non-homogeneous Markov chain, thus allowing the times to failure to posses Weibull-like distributions. Because of the departures from traditional models, the solution method employed is that of Kolmogorov integral equations, which are evaluated numerically.

Trivedi, K. S.↗
NASA NTRS1983

Specifying and Verifying Ultra-reliability and Fault-tolerance Properties

A methodology to rigorously verify ultrareliability and fault tolerance system properties is described. The methodology utilizes a hierarchy of formal mathematical specifications of system design and incremental design proof to prove the system has the desired properties. A small example of the approach is given, and the application of the methodology to the large scale proof of SIFT, a fault tolerant flight control operating system, is discussed.

Schwartz, R. L.↗
NASA NTRS1984

Software Implemented Fault-Tolerant (SIFT) user's guide

Program development for a Software Implemented Fault Tolerant (SIFT) computer system is accomplished in the NASA LaRC AIRLAB facility using a DEC VAX-11 to interface with eight Bendix BDX 930 flight control processors. The interface software which provides this SIFT program development capability was developed by AIRLAB personnel. This technical memorandum describes the application and design of this software in detail, and is intended to assist both the user in performance of SIFT research and the systems programmer responsible for maintaining and/or upgrading the SIFT programming environment.

Green, D. F., Jr.↗
NASA NTRS1985

Redundant Asynchronous Microprocessor System

Fault-tolerant computer structure called RAMPS (for redundant asynchronous microprocessor system) has simplicity of static redundancy but offers intermittent-fault handling ability of complex, dynamically redundant systems. New structure useful wherever several microprocessors are employed for control - in aircraft, industrial processes, robotics, and automatic machining, for example.

Meyer, G.↗