Search NASA⌕ Search

SEARCH · Search NASA

Results for “ferromagnetic insulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Coexistence of ferromagnetism and antiferromagnetic dimers in topological insulators

The addition of magnetic impurities in topological insulators (TIs) can drive ferromagnetic order that leads to quantum anomalous Hall transport well below the Curie temperature. The fragility of the quantized regime has been ascribed to the random nature of the magnetic moment distribution. Here, we refine this hypothesis by using inelastic neutron scattering and density-functional theory calculations to show that two antagonistic components define the magnetism in Mn-substituted SnTe, thereby limiting the effectiveness of dilute magnetic TIs. One component is strongly bound antiferromagnetic dimers that compete with ferromagnetic order. In conclusion, the other component consists of undimerized moments where ferromagnetic order develops via long-range interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Termination switching of antiferromagnetic proximity effect in topological insulator

This work reports the ferromagnetism of topological insulator, (Bi,Sb) 2 Te 3 (BST), with a Curie temperature of approximately 120 K induced by magnetic proximity effect (MPE) of an antiferromagnetic CrSe. The MPE was shown to be highly dependent on the stacking order of the heterostructure, as well as the interface symmetry: Growing CrSe on top of BST results in induced ferromagnetism, while growing BST on CrSe yielded no evidence of an MPE. Cr-termination in the former case leads to double-exchange interactions between Cr 3+ surface states and Cr 2+ bulk states. This Cr 3+ -Cr 2+ exchange stabilizes the ferromagnetic order localized at the interface and magnetically polarizes the BST Sb band. In contrast, Se-termination at the CrSe/BST interface yields no detectable MPE. These results directly confirm the MPE in BST films and provide critical insights into the sensitivity of the surface state.

42 ENGINEERING↗
DOE OSTI2020

Study of Polycrystalline Bulk Sr 3 OsO 6 Double-Perovskite Insulator: Comparison with 1000 K Ferromagnetic Epitaxial Films

Polycrystalline Sr 3 OsO 6 , which is an ordered double-perovskite insulator, is synthesized via solid-state reaction under high-temperature and high-pressure conditions of 1200 ° C and 6 GPa. The synthesis enables us to conduct a comparative study of the bulk form of Sr3OsO6 toward revealing the driving mechanism of 1000 K ferromagnetism, which has recently been discovered for epitaxially grown Sr 3 OsO 6 films. Unlike the film, the bulk is dominated by antiferromagnetism rather than ferromagnetism. Thus, robust ferromagnetic order appears only when Sr 3 OsO 6 is under the influence of interfaces. A specific heat capacity of 39.6(9) X 10 -3 J mol -1 K -2 is found at low temperatures (<17 K). This value is remarkably high, suggesting the presence of possible Fermionic-like excitations at the magnetic ground state. While the bulk and film forms of Sr 3 OsO 6 share the same lattice basis and electrically insulating state, the magnetism is entirely different between them.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Severe Dirac Mass Gap Suppression in Sb 2 Te 3 -Based Quantum Anomalous Hall Materials

The quantum anomalous Hall (QAH) effect appears in ferromagnetic topological insulators (FMTIs) when a Dirac mass gap opens in the spectrum of the topological surface states (SSs). Unaccountably, although the mean mass gap can exceed 28 meV (or ~320 K), the QAH effect is frequently only detectable at temperatures below 1 K. Using atomic-resolution Landau level spectroscopic imaging, we compare the electronic structure of the archetypal FMTI Cr 0.08 (Bi 0.1 Sb 0.9 ) 1.92 Te 3 to that of its nonmagnetic parent (Bi 0.1 Sb 0.9 ) 2 Te 3 , to explore the cause. In (Bi 0.1 Sb 0.9 ) 2 Te 3 , we find spatially random variations of the Dirac energy. Statistically equivalent Dirac energy variations are detected in Cr 0.08 (Bi 0.1 Sb 0.9 ) 1.92 Te 3 with concurrent but uncorrelated Dirac mass gap disorder. Additionally, these two classes of SS electronic disorder conspire to drastically suppress the minimum mass gap to below 100 μeV for nanoscale regions separated by <1 μm. This fundamentally limits the fully quantized anomalous Hall effect in Sb 2 Te 3 -based FMTI materials to very low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Interface-induced superconductivity in magnetic topological insulators

The interface between two different materials can show unexpected quantum phenomena. Here, in this study, we used molecular beam epitaxy to synthesize heterostructures formed by stacking together two magnetic materials, a ferromagnetic topological insulator (TI) and an antiferromagnetic iron chalcogenide (FeTe). We observed emergent interface-induced superconductivity in these heterostructures and demonstrated the co-occurrence of superconductivity, ferromagnetism, and topological band structure in the magnetic TI layer—the three essential ingredients of chiral topological superconductivity (TSC). The unusual coexistence of ferromagnetism and superconductivity is accompanied by a high upper critical magnetic field that exceeds the Pauli paramagnetic limit for conventional superconductors at low temperatures. These magnetic TI/FeTe heterostructures with robust superconductivity and atomically sharp interfaces provide an ideal wafer-scale platform for the exploration of chiral TSC and Majorana physics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Spin-orbit–driven ferromagnetism at half moiré filling in magic-angle twisted bilayer graphene

Strong electron correlation and spin-orbit coupling (SOC) can have a profound influence on the electronic properties of materials. We examined their combined influence on a two-dimensional electronic system at the atomic interface between magic-angle twisted bilayer graphene and a tungsten diselenide crystal. We found that strong electron correlation within the moiré flatband stabilizes correlated insulating states at both quarter and half filling, and that SOC transforms these Mott-like insulators into ferromagnets, as evidenced by a robust anomalous Hall effect with hysteretic switching behavior. The coupling between spin and valley degrees of freedom could be demonstrated through control of the magnetic order with an in-plane magnetic field or a perpendicular electric field. Our findings establish an experimental knob to engineer topological properties of moiré bands in twisted bilayer graphene and related systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Amorphous nonstoichiometric oxides with tunable room-temperature ferromagnetism and electrical transport

Material functionalities strongly depend on the stoichiometry, crystal structure, and homogeneity. Here we demonstrate an approach of amorphous nonstoichiometric inhomogeneous oxides to realize tunable ferromagnetism and electrical transport at room temperature. In order to verify the origin of the ferromagnetism, we employed a series of structural, chemical, and electronic state characterizations. Combined with electron microscopy and transport measurements, synchrotron-based grazing incident wide angle X-ray scattering, soft X-ray absorption and circular dichroism clearly reveal that the room-temperature ferromagnetism originates from the In 0.23 Co 0.77 O 1-v amorphous phase with a large tunable range of oxygen vacancies. The room-temperature ferromagnetism is tunable from a high saturation magnetization of 500 emu cm -3 to below 25 emu cm -3 , with the evolving electrical resistivity from 5 × 10 3 μΩ cm to above 2.5 × 10 5 μΩ cm. Inhomogeneous nano-crystallization emerges with decreasing oxygen vacancies, driving the system towards non-ferromagnetism and insulating regime. Our work unfolds the novel functionalities of amorphous nonstoichiometric inhomogeneous oxides, which opens up new opportunities for developing spintronic materials with superior magnetic and transport properties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Unveiling the Finite Temperature Physics of Hydrogen Chains via Auxiliary Field Quantum Monte Carlo

The ability to accurately predict the finite temperature properties and phase diagrams of realistic quantum solids is central to uncovering new phases and engineering materials with novel properties ripe for device applications. Nonetheless, there remain comparatively few many-body techniques capable of elucidating the finite temperature physics of solids from first principles. Here, we take a significant step toward developing such a technique by generalizing our previous, exact fully ab initio finite temperature Auxiliary Field Quantum Monte Carlo (FT-AFQMC) method to model periodic solids and employing it to uncover the finite temperature physics of periodic hydrogen chains. Our chains’ unit cells consist of 10 hydrogen atoms modeled in a minimal basis, and we sample 5 k-points from the first Brillouin zone to arrive at a supercell consisting of 50 orbitals and 50 electrons. Based upon our calculations of these chains’ many-body energies, free energies, entropies, heat capacities, double and natural occupancies, and charge and spin correlation functions, we outline their metal–insulator and magnetic ordering as a function of both H–H bond distance and temperature. At low temperatures approaching the ground state, we observe both metal–insulator and ferromagnetic–antiferromagnetic crossovers at bond lengths between 0.5 and 0.75 Å. We then demonstrate how this low-temperature ordering evolves into a metallic phase with decreasing magnetic order at higher temperatures. In order to contextualize our results, we compare the features we observe to those previously seen in one-dimensional, half-filled Hubbard models at finite temperature and in ground state hydrogen chains. Interestingly, we identify signatures of the Pomeranchuk effect in hydrogen chains for the first time and show that spin and charge excitations that typically arise at distinct temperatures in the Hubbard model are indistinguishably coupled in these systems. Beyond qualitatively revealing the many-body phase behavior of hydrogen chains in a numerically exact manner without invoking the phaseless approximation, our efforts shed light on the further theoretical developments that will be required to construct the phase diagrams of the more complex transition metal, lanthanide, and actinide solids of longstanding interest to physicists.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrical Detection of Spin-Hall-Induced Auto-oscillations in Lithium Aluminate Ferrite Thin Films

Ferrimagnetic insulators with ultralow damping are of great interest for their potential applications in energy-efficient computing devices. Here, we report the direct electrical detection of magnetic auto-oscillations in unpatterned ultralow damping ferrimagnetic insulator epitaxial Li 0.5 Al 0.5 Fe 2 O 4 thin films, driven by a current in a proximal Pt nanowire. Auto-oscillations occur for only one current polarity, consistent with the spin-Hall effect inducing the oscillation state. Micromagnetic modeling shows good agreement with the experimental frequency and field dispersions, showing only one dominant oscillation mode, in contrast to the multiple modes typically observed in transition-metal nanowire-type spin-Hall nanooscillators. This study illustrates a new material system for neuromorphic computing and magnonics, a simple material platform with the direct-current generation of high-frequency (~10 GHz) signals and their electrical detection.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electronic structure and small-hole polarons in YTiO 3

As a prototypical Mott insulator with ferromagnetic ordering, YTiO 3 (YTO) is of great interest in the study of strong electron correlation effects and orbital ordering. Here we report the first molecular beam epitaxy (MBE) growth of YTO films, combined with theoretical and experimental characterizations of the electronic structure and charge transport properties. The obstacles of YTO MBE growth are discussed and potential routes to overcome them are proposed. DC transport and Seebeck measurements on thin films and bulk single crystals identify p-type Arrhenius transport behavior with an activation energy of ~0.17 eV in thin films, consistent with the energy barrier for small hole polaron migration from hybrid density functional theory calculations. Hard x-ray photoelectron spectroscopy measurements show the lower Hubbard band at 1.1 eV below the Fermi level, whereas a Mott-Hubbard band gap of ~1.5 eV is determined from photoluminescence measurements. These findings provide critical insight into the electronic band structure of YTO and related materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A quantum material spintronic resonator

In a spintronic resonator a radio-frequency signal excites spin dynamics that can be detected by the spin-diode effect. Such resonators are generally based on ferromagnetic metals and their responses to spin torques. New and richer functionalities can potentially be achieved with quantum materials, specifically with transition metal oxides that have phase transitions that can endow a spintronic resonator with hysteresis and memory. Here we present the spin torque ferromagnetic resonance characteristics of a hybrid metal-insulator-transition oxide/ ferromagnetic metal nanoconstriction. Our samples incorporate V 2 O 3 , with Ni, Permalloy (Ni 80 Fe 20 ) and Pt layers patterned into a nanoconstriction geometry. The first order phase transition in V 2 O 3 is shown to lead to systematic changes in the resonance response and hysteretic current control of the ferromagnetic resonance frequency. Further, the output signal can be systematically varied by locally changing the state of the V 2 O 3 with a dc current. These results demonstrate new spintronic resonator functionalities of interest for neuromorphic computing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Giant Topological Hall Effect in van der Waals Heterostructures of CrTe 2 /Bi 2 Te 3

Discoveries of the interfacial topological Hall effect (THE) provide an ideal platform for exploring the physics arising from the interplay between topology and magnetism. The interfacial topological Hall effect is closely related to the Dzyaloshinskii-Moriya interaction (DMI) at an interface and topological spin textures. However, it is difficult to achieve a sizable THE in heterostructures due to the stringent constraints on the constituents of THE heterostructures, such as strong spin-orbit coupling (SOC). Here, we report the observation of a giant THE signal of 1.39 mu Omega.cm in the van der Waals heterostructures of CrTe 2 /Bi 2 Te 3 fabricated by molecular beam epitaxy, a prototype of two-dimensional (2D) ferromagnet (FM)/topological insulator (TI). This large magnitude of THE is attributed to an optimized combination of 2D ferromagnetism in CrTe 2 , strong SOC in Bi 2 Te 3 , and an atomically sharp interface. Furthermore, our work reveals CrTe 2 /Bi 2 Te 3 as a convenient platform for achieving large interfacial THE in hybrid systems, which could be utilized to develop quantum science and high-density information storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enhanced ferromagnetism in monolayer Cr 2 Te 3 via topological insulator coupling

Exchange-coupled interfaces are pivotal in exploiting two-dimensional (2D) ferromagnetism. Due to the extraordinary correlations among charge, spin, orbital and lattice degrees of freedom, layered magnetic transition metal chalcogenides (TMCs) bode well for exotic topological phenomena. Here we report the realization of wafer-scale Cr 2 Te 3 down to monolayer (ML) on insulating SrTiO 3 (111) and/or Al 2 O 3 (001) substrates using molecular beam epitaxy. Robust ferromagnetism persists in the 2D limit. In particular, the Curie temperature T C of 2 ML Cr 2 Te 3 increases from 100 K to ∼120 K when proximitized to topological insulator (TI) (Bi,Sb) 2 Te 3 , with substantially boosted magnetization as observed via polarized neutron reflectometry. Our experiments and theory strongly indicate that the Bloembergen–Rowland interaction is likely universal underlying T C enhancement in TI-coupled magnetic heterostructures. The topological-surface-enhanced magnetism in 2D TMC enables further exchange coupling physics and quantum hybrid studies, including paving the way to realize interface-modulated topological electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Molecular coupling competing with defects within insulator of the magnetic tunnel junction-based molecular spintronics devices

Nearly 70 years old dream of incorporating molecule as the device element is still challenged by competing defects in almost every experimentally tested molecular device approach. This paper focuses on the magnetic tunnel junction (MTJ) based molecular spintronics device (MTJMSD) method. An MTJMSD utilizes a tunnel barrier to ensure a robust and mass-producible physical gap between two ferromagnetic electrodes. MTJMSD approach may benefit from MTJ's industrial practices; however, the MTJMSD approach still needs to overcome additional challenges arising from the inclusion of magnetic molecules in conjunction with competing defects. Molecular device channels are covalently bonded between two ferromagnets across the insulating barrier. An insulating barrier may possess a variety of potential defects arising during the fabrication or operational phase. This paper describes an experimental and theoretical study of molecular coupling between ferromagnets in the presence of the competing coupling via an insulating tunnel barrier. We discuss the experimental observations of hillocks and pinhole-type defects producing inter-layer coupling that compete with molecular device elements. We performed theoretical simulations to encompass a wide range of competition between molecules and defects. Monte Carlo Simulation (MCS) was used for investigating the defect-induced inter-layer coupling on MTJMSD. Our research may help understand and design molecular spintronics devices utilizing various insulating spacers such as aluminum oxide (AlOx) and magnesium oxide (MgO) on a wide range of metal electrodes. This paper intends to provide practical insights for researchers intending to investigate the molecular device properties via the MTJMSD approach and do not have a background in magnetic tunnel junction fabrication.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High resolution ferromagnetic and antiferromagnetic correlations in La 0.7 Ca 0.3 MnO 3

La 0.7 Ca 0.3 MnO 3 (LCMO30) is a perovskite manganite with a phase transition (T C = 238 K) between a paramagnetic insulator and a ferromagnetic metal. We use single-crystal, inelastic neutron scattering to refine previous work on the low energy (ℏω < 10 meV) magnetic excitations. At 300 K the spectrum consists of a diffusive ferromagnetic component at the pseudo-cubic Brillouin zone center coexisting with a quasielastic excitation located at the pseudo-cubic Brillouin zone edge. Both components are anti-correlated with ferromagnetic long-range order, showing weakened intensity at 215 K in the ferromagnetic phase. Polarized neutron scattering shows both features to be purely magnetic in origin. Furthermore, this indicates the simultaneous presence of ferromagnetic and antiferromagnetic correlations (located, respectively, at the zone center and zone edge) in a three-dimensional perovskite, while this coexistence had been previously observed only in a bilayer compound.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Spin Polarons and Ferromagnetism in Doped Dilute Moiré-Mott Insulators

Moiré heterostructures of transition metal dichalcogenides (TMDs) exhibit Mott-insulating behavior both at half filling as well as at fractional fillings, where electronic degrees of freedom form self-organized Wigner crystal states. An open question concerns magnetic states obtained by lifting the pseudospin-1/2 degeneracy of these states at lowest temperatures. While at half filling virtual hopping is expected to induce (weak) antiferromagnetic exchange interactions, these are strongly suppressed when considering dilute filling fractions. We argue that, instead, a small concentration of doped electrons leads to the formation of spin polarons, inducing ferromagnetic order at experimentally relevant temperatures, consistent with recently observed ferromagnetic states in moiré TMD systems. Here, we predict explicit signatures of polaron formation in the magnetization profile.

Kondo lattice model↗
DOE OSTI2020

Characterization of Amplification Properties of the Superconducting-Ferromagnetic Transistor

Here we report on the measurement results of the superconducting-ferromagnetic transistors (SFTs). The devices were made at Northwestern University and Hypres (SeeQC), Inc. (Nevirkovets et al., 2014; 2015). SFT is a multiterminal device with the SIS'FIFS (or SFIFS'IS) structure (where S, I, and F denote a superconductor, an insulator, and a ferromagnetic material, respectively) exploiting intense quasiparticle injection in order to modify the nonlinear I-V curve of a superconducting tunnel junction. SFT is capable of providing voltage, current, and power amplification while having good input/output isolation. We characterized the devices using different measurement techniques. We measured S parameters of the single- and double-acceptor devices at frequencies up to 5 MHz. Importantly, we confirmed that the isolation between the input and output of the device is quite good. However, the techniques typically employed to characterize semiconductor devices do not allow for revealing the full potential of our low-resistive SFT devices, especially those having two acceptors. In the latter case, we also tested the devices using the battery-powered current sources with floating grounds. Analyzing double-acceptor I-V curves recorded at different levels of injection currents, for an optimal load, we deduced a small-signal voltage gain of 33 and a power gain of 2.4. We suggest that further improvement of the SFT device parameters is possible in optimized devices, so that the device potentially may serve as a preamplifier for readout of output signals of cryogenic detectors and be useful as an element of other superconductor-based circuits. In addition, we used scanning transmission electron microscopy to identify some problems in the fabrication of the devices without any planarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗