Search NASA⌕ Search

SEARCH · Search NASA

Results for “field data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Neural Network Prediction of Failure of Damaged Composite Pressure Vessels from Strain Field Data Acquired by a Computer Vision Method

This effort used a new and novel method of acquiring strains called Sub-pixel Digital Video Image Correlation (SDVIC) on impact damaged Kevlar/epoxy filament wound pressure vessels during a proof test. To predict the burst pressure, the hoop strain field distribution around the impact location from three vessels was used to train a neural network. The network was then tested on additional pressure vessels. Several variations on the network were tried. The best results were obtained using a single hidden layer. SDVIC is a fill-field non-contact computer vision technique which provides in-plane deformation and strain data over a load differential. This method was used to determine hoop and axial displacements, hoop and axial linear strains, the in-plane shear strains and rotations in the regions surrounding impact sites in filament wound pressure vessels (FWPV) during proof loading by internal pressurization. The relationship between these deformation measurement values and the remaining life of the pressure vessels, however, requires a complex theoretical model or numerical simulation. Both of these techniques are time consuming and complicated. Previous results using neural network methods had been successful in predicting the burst pressure for graphite/epoxy pressure vessels based upon acoustic emission (AE) measurements in similar tests. The neural network associates the character of the AE amplitude distribution, which depends upon the extent of impact damage, with the burst pressure. Similarly, higher amounts of impact damage are theorized to cause a higher amount of strain concentration in the damage effected zone at a given pressure and result in lower burst pressures. This relationship suggests that a neural network might be able to find an empirical relationship between the SDVIC strain field data and the burst pressure, analogous to the AE method, with greater speed and simplicity than theoretical or finite element modeling. The process of testing SDVIC neural network analysis and some encouraging preliminary results are presented in this paper. Details are given concerning the processing of SDVIC output data such that it may be used as back propagation neural network (BPNN) input data. The software written to perform this processing and the BPNN algorithm are also discussed. It will be shown that, with limited training, test results indicate an average error in burst pressure prediction of approximately six percent,

Russell, Samuel S.↗
NASA NTRS1974

A comparison of electric and magnetic field data from the OGO-6 spacecraft

Electric and magnetic field disturbance characteristics from OGO-6 were studied. Examination of simultaneous patterns of disturbance below 600 km over the summer polar cap showed that pattern changes in electric field and in the disturbance in magnetic field magnitude are highly correlated. This correlation extends to pattern shapes boundary locations, and to the amplitudes of the correlated quantities. In the winter hemisphere, at altitudes above 800 km, correlations between boundaries exist, pattern correlations are present, and amplitude correlations are essentially absent. Below 600 km the region of positive delta B, from 2200 to 1000 MLT, has a significant contribution from ionospheric and nonionospheric sources. Above 800 km the nonionospheric sources dominate.

Langel, R. A.↗
NASA NTRSDate not supplied

An Overview of NASA’s Catalog of Archived Suborbital Earth Science Investigations (CASEI): Supporting FAIR and Open Access to Airborne and Field Data

Since 2019, NASA’s Airborne Data Management Group (ADMG) within the Interagency Implementation and Advanced Concepts Team (IMPACT) has worked to promote and ensure the discoverability and accessibility of the agency’s non-satellite Earth science observations. A primary component of this effort is the development of NASA’s Catalog of Archived Suborbital Earth Science Investigations (CASEI) and the vetting of key contextual details required to sustain this unique inventory of airborne and field metadata. CASEI provides information on the science objectives motivating data collection, key events/time periods in the observational record aligned with the science objectives, complementary simultaneous observations, programmatic details, and much more. The diverse set of data formats and disciplines served by CASEI have required the implementation of a common data model to organize suborbital observation metadata and efficiently connect appropriate campaigns, platforms, and instruments. The CASEI inventory provides a single entry point for users to search and browse NASA’s airborne and field data archives, regardless of which repository is responsible for their stewardship. This presentation will provide a summary of the motivations for and the development of the CASEI system. Particular attention will be granted to how CASEI facilitates discovery and reuse of these lesser-known NASA data, supporting the Open Science vision and enhancing the return on investments made to collect these unique and varied observations. An up-to-date summary of CASEI inventory content and initial metrics will be provided. Current and future avenues ADMG is pursuing to enhance both CASEI and specific components of suborbital data stewardship at various stages of the data life cycle will also be discussed.

Stephanie M. Wingo↗
NASA NTRS1990

Analysis of field data on computer failures

This paper emphasizes the importance of making field measurements for effective and realistic dependability evaluations. Two examples are given, both based on real data from IBM mainframes. The first evaluates the impact of the operating environment on system failure characteristics and the second shows how an accurate model depicting this interaction can be extracted from real data.

Iyer, Ravishankar K.↗
NASA NTRS2004

Chandra X-ray Observations of Young Clusters: Orion Flanking Fields Data - Volume II

We present results of Chandra observations of two flanking fields (FFs) in Orion, outside the Orion Nebula Cluster (ONC). The observations were taken with the ACIS-I camera with an exposure time of about 48 ks each field. We present a catalog of 417 sources, which includes X-ray luminosity, optical and infrared photometry, and X-ray variability information. We have found 91 variable sources, 33 of which have a flarelike light curve and 11 of which have a pattern of a steady increase or decrease over a 10 hr period. The optical and infrared photometry for the stars identified as X-ray sources are consistent with most of these objects being pre-main-sequence stars with ages younger than 10 Myr. We present evidence for an age difference among the X-ray-selected samples of NGC 2264, Orion FFs, and ONC, with NGC 2264 being the oldest and ONC being the youngest.

pre-main sequence↗
NASA NTRS1983

MAGSAT anomaly field data of the crustal properties of Australia

Progress is reported in producing maps of Australia showing; crustal magnetic anomalies at constant elevation; bulk surface magnetization; and the geomagnetic field intensity, inclination and declination for the Australian region from global models of the geomagnetic field derived from MAGSAT data. The development of a data base management system is also considered.

Source record↗
NASA NTRS2003

National Combustion Code Validated Against Lean Direct Injection Flow Field Data

Most combustion processes have, in some way or another, a recirculating flow field. This recirculation stabilizes the reaction zone, or flame, but an unnecessarily large recirculation zone can result in high nitrogen oxide (NOx) values for combustion systems. The size of this recirculation zone is crucial to the performance of state-of-the-art, low-emissions hardware. If this is a large-scale combustion process, the flow field will probably be turbulent and, therefore, three-dimensional. This research dealt primarily with flow fields resulting from lean direct injection (LDI) concepts, as described in Research & Technology 2001. LDI is a concept that depends heavily on the design of the swirler. The LDI concept has the potential to reduce NOx values from 50 to 70 percent of current values, with good flame stability characteristics. It is cost effective and (hopefully) beneficial to do most of the design work for an LDI swirler using computer-aided design (CAD) and computer-aided engineering (CAE) tools. Computational fluid dynamics (CFD) codes are CAE tools that can calculate three-dimensional flows in complex geometries. However, CFD codes are only beginning to correctly calculate the flow fields for complex devices, and the related combustion models usually remove a large portion of the flow physics.

Iannetti, Anthony C.↗
NASA NTRS2015

Investigation of Spiral Bevel Gear Condition Indicator Validation via AC-29-2C Combining Test Rig Damage Progression Data with Fielded Rotorcraft Data

This is the final of three reports published on the results of this project. In the first report, results were presented on nineteen tests performed in the NASA Glenn Spiral Bevel Gear Fatigue Test Rig on spiral bevel gear sets designed to simulate helicopter fielded failures. In the second report, fielded helicopter HUMS data from forty helicopters were processed with the same techniques that were applied to spiral bevel rig test data. Twenty of the forty helicopters experienced damage to the spiral bevel gears, while the other twenty helicopters had no known anomalies within the time frame of the datasets. In this report, results from the rig and helicopter data analysis will be compared for differences and similarities in condition indicator (CI) response. Observations and findings using sub-scale rig failure progression tests to validate helicopter gear condition indicators will be presented. In the helicopter, gear health monitoring data was measured when damage occurred and after the gear sets were replaced at two helicopter regimes. For the helicopters or tails, data was taken in the flat pitch ground 101 rotor speed (FPG101) regime. For nine tails, data was also taken at 120 knots true airspeed (120KTA) regime. In the test rig, gear sets were tested until damage initiated and progressed while gear health monitoring data and operational parameters were measured and tooth damage progression documented. For the rig tests, the gear speed was maintained at 3500RPM, a one hour run-in was performed at 4000 in-lb gear torque, than the torque was increased to 8000 in-lbs. The HUMS gear condition indicator data evaluated included Figure of Merit 4 (FM4), Root Mean Square (RMS) or Diagnostic Algorithm 1(DA1), + 3 Sideband Index (SI3) and + 1 Sideband Index (SI1). These were selected based on their sensitivity in detecting contact fatigue damage modes from analytical, experimental and historical helicopter data. For this report, the helicopter dataset was reduced to fourteen tails and the test rig data set was reduced to eight tested gear sets. The damage modes compared were separated into three cases. For case one, both the gear and pinion showed signs of contact fatigue or scuffing damage. For case two, only the pinion showed signs of contact fatigue damage or scuffing. Case three was limited to the gear tests when scuffing occurred immediately after the gear run-in. Results of this investigation highlighted the importance of understanding the complete monitored systems, for both the helicopter and test rig, before interpreting health monitoring data. Further work is required to better define these two systems that include better state awareness of the fielded systems, new sensing technologies, new experimental methods or models that quantify the effect of system design on CI response and new methods for setting thresholds that take into consideration the variance of each system.

spiral bevel gears↗
NASA NTRS1988

The geomagnetic field at 1982 from DE-2 and other magnetic field data

Data from the DE-2 spacecraft are combined with data from the Magsat spacecraft and data from magnetic observatories and magnetic surveys to derive a geomagnetic field model for the period from May 1979 to May 1983. The model is an extension of the Goddard Space Flight Center (12/83) model. The model includes a solution for parameters representing the noncore field, or anomaly bias, at each observatory in the Project Magnet program. A table of these anomalies is presented. The results from this model are compared with those from the IGRF1980 (Peddie, 1982) and the IGRF1987 (Barraclough, 1987).

Langel, R. A.↗
NASA NTRS2001

Tropospheric Diagnostic Modeling Studies of PEM-Tropics B Field Data: Investigation of the HOx/NOx/O3 Photochemical System and its Coupling to Sulfur Chemistry

Over the time period of this NASA grant the PI has helped plan and execute the PEM-Tropics B field program. He has also helped organize and co-chair two data workshops which have focused on the detailed analysis of PEM-Tropics B data. His direct participation in these analyses has led to his involvement in 13 manuscripts, nine of which are in print, two in press, and two submitted. A complete list of papers is given.

Davis, Douglas D.↗
NASA NTRS1979

Investigation of the magnetospheric boundary plasma and magnetic field data from Explorers 33, 43, and 50

Understanding of the plasma depletion process in the dayside magnetosheath, the nature of magnetotail boundary motion, and the geometry of the magnetospheric boundary layers was examined. A model of the dayside boundary layers, based on the hypothesis that merging occurs only for strictly anitparallel fields was developed which provides a qualitative solution to the problem of the half-wave rectifier response of the magnetosphere to the solar wind electric field. Regarding magnetotail boundary motion, consideration of the data led to the conclusion that at lunar distance, substorms are associated with very large amplitude compressional wave motion of the sausage type. A study of IMF orientation for depletion and nondepletion cases suggests that depletion is most likely to occur for angles between the IMF and the normal to the magnetopause at the measurement location near 90 deg, in agreement with predictions. Observations of the heat flux in the dayside magnetosheath plasma suggest that the energized plasma ions have their source along a given flux tube at that intersection with the bow shock where the magnetic field is most compressed.

Siscoe, G. L.↗
NASA NTRS1987

Spectral signatures of jumps and turbulence in interplanetary speed and magnetic field data

It is shown here that, consistent with a suggestion of Burlaga and Mish (1987), the f exp -2 spectra in the magnitudes of the magnetic and velocity fields in the solar wind result from jumps due to various rapid changes in the time series for these quantities. If these jumps are removed from the data, the spectra of the resulting 'difference' time series have the f exp -5/3 form. It is concluded that f exp -2 spectra in these magnitudes arise from phase coherent structures that can be distinguished clearly from incoherent turbulent fluctuations.

Roberts, D. A.↗
NASA NTRS1999

Tropospheric Diagnostic Modeling Studies of PEM-Tropics Field Data: Investigation of the HO(x)/NO(x)/O3 Photochemical System and Its Coupling to Sulfur and Halogen Chemistry

Over the time period of this NASA grant the PI has helped plan and execute in the PEM-Tropics A field program. He has also helped organize and co-chair three data workshops which have focused on the detailed analysis of PEM-Tropics A data. His direct participation in these analyses has led to his major involvement in 10 manuscripts, 5 of which are in print, 3 in press, and 2 submitted. A complete list of papers is included in the report.

Davis, Douglas D.↗
NASA NTRS1989

PROMIS series. Volume 7: GOES 5 and GOES 6 geosynchronous magnetic field data for March - June 1986

This is the seventh in a series of volumes pertaining to the Polar Region Outer Magnetosphere International Study (PROMIS). This volume contains 24 hour plots of approximately 1-minute average magnetic fields from the GOES 5 and GOES 6 spacecraft for the period March 10 through June 16, 1986. Data are displayed in a VDH coordinate system based on a centered dipole with northern hemisphere geographic coordinates of the pole at 78.80 deg latitude and 289.24 deg longitude.

Fairfield, D. H.↗
NASA NTRS1996

Attitude and Trajectory Estimation Using Earth Magnetic Field Data

The magnetometer has long been a reliable, inexpensive sensor used in spacecraft momentum management and attitude estimation. Recent studies show an increased accuracy potential for magnetometer-only attitude estimation systems. Since the Earth's magnetic field is a function of time and position, and since time is known quite precisely, the differences between the computer and measured magnetic field components, as measured by the magnetometers throughout the entire spacecraft orbit, are a function of both the spacecraft trajectory and attitude errors. Therefore, these errors can be used to estimate both trajectory and attitude. Traditionally, satellite attitude and trajectory have been estimated with completely separate system, using different measurement data. Recently, trajectory estimation for low earth orbit satellites was successfully demonstrated in ground software using only magnetometer data. This work proposes a single augmented extended Kalman Filter to simultaneously and autonomously estimate both spacecraft trajectory and attitude with data from a magnetometer and either dynamically determined rates or gyro-measured body rates.

Deutschmann, Julie↗
NASA NTRS1981

Continuation of potential field data to a common altitude

It is noted that the distorsions introduced by the variation of distance between the sources and the measurement points can be important enough to create fake anomalies. The average amplitude of the anomalies at MAGSAT altitude is of the order of a few nT. Thus it is necessary to be careful in reducing MAGSAT data to a common elevation. The achievement of the corresponding anomaly map is of primary importance for the study of regional and long wave length anomalies. A method for the continuation of potential fields is described which consists in representing any harmonic function (in particular the anomaly is function of space coordinates) as a sum of elementary harmonic functions; the continuation being achieved by an inverse technique. Tests, made on a synthetic set of data, evaluate the method.

Lemouel, J. L.↗