Search NASA⌕ Search

SEARCH · Search NASA

Results for “flutter analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Modern wing flutter analysis by computational fluid dynamics methods

The application and assessment of the recently developed CAP-TSD transonic small-disturbance code for flutter prediction is described. The CAP-TSD code has been developed for aeroelastic analysis of complete aircraft configurations and was previously applied to the calculation of steady and unsteady pressures with favorable results. Generalized aerodynamic forces and flutter characteristics are calculated and compared with linear theory results and with experimental data for a 45 deg sweptback wing. These results are in good agreement with the experimental flutter data which is the first step toward validating CAP-TSD for general transonic aeroelastic applications. The paper presents these results and comparisons along with general remarks regarding modern wing flutter analysis by computational fluid dynamics methods.

Cunningham, Herbert J.↗
NASA NTRS1972

Stall flutter analysis.

An analysis of unsteady airfoil stall and stall flutter is presented that is based on a series of approximations. Unsteady aerodynamic characteristics are related theoretically to static aerodynamic characteristics. Preliminary results show good agreement with experimental dynamic stall data. The analysis is applied to determine the boundaries for stall flutter, particularly for the straight wing of one candidate space-shuttle configuration. As formulated, the analysis should provide a conservative estimate - i.e., the predicted stall flutter region is slightly larger than the expected one, as demonstrated by comparison with experiments.

Ericsson, L. E.↗
NASA NTRS1975

Flutter analysis of two parallel elastically coupled flat plates

Flutter of two parallel elastically coupled flat plates was investigated analytically. A closed-form solution including both aerodynamic and structural damping is presented for flutter of flat orthotropic plates coupled by an elastic medium. Both plates are simply supported along the side edges but are supported by deflectional, rotational, and torsional springs of arbitrary stiffness at the leading and trailing edges. Two-dimensional quasi-steady aerodynamics was utilized in the solution. Since the large number of variables present in the problem precludes extensive parametric studies, results are presented to indicate the basic flutter characteristics of coupled two-plate systems and to assess the validity of previously published modal solutions for similar problems.

Shore, C. P.↗
NASA NTRS1983

A three degree-of-freedom, typical section flutter analysis using harmonic transonic air forces

Typical section flutter solutions are obtained using generalized air forces calculated with OPTRAN2, a program based on the transonic small perturbation potential equation, which uses potentials from a nonlinear solution to the steady flow to obtain linear unsteady air forces. Flutter results are calculated with a conventional, linear V-g type solution. Results are presented for a NACA 64A010 airfoil oscillating in plunge and pitch, and with a quarter-chord control surface in the Mach number range of 0.80 to 0.90. The flutter boundary shows a significant 'transonic' bucket, together with changes in flutter mode as, with increasing Mach numbers, a shock appears on the airfoil and then moves aft. Single degree-of-freedom instabilities associated with both the pitch and the control surface motions are identified.

Weatherill, W. H.↗
NASA NTRS1993

Flutter analysis using transversality theory

A new method of calculating flutter boundaries of undamped aeronautical structures is presented. The method is an application of the weak transversality theorem used in catastrophe theory. In the first instance, the flutter problem is cast in matrix form using a frequency domain method, leading to an eigenvalue matrix. The characteristic polynomial resulting from this matrix usually has a smooth dependence on the system's parameters. As these parameters change with operating conditions, certain critical values are reached at which flutter sets in. Our approach is to use the transversality theorem in locating such flutter boundaries using this criterion: at a flutter boundary, the characteristic polynomial does not intersect the axis of the abscissa transversally. Formulas for computing the flutter boundaries and flutter frequencies of structures with two degrees of freedom are presented, and extension to multi-degree of freedom systems is indicated. The formulas have obvious applications in, for instance, problems of panel flutter at supersonic Mach numbers.

Afolabi, D.↗
NASA NTRS2002

Flutter Analysis of a Transonic Fan

This paper describes the calculation of flutter stability characteristics for a transonic forward swept fan configuration using a viscous aeroelastic analysis program. Unsteady Navier-Stokes equations are solved on a dynamically deforming, body fitted, grid to obtain the aeroelastic characteristics using the energy exchange method. The non-zero inter-blade phase angle is modeled using phase-lagged boundary conditions. Results obtained show good correlation with measurements. It is found that the location of shock and variation of shock strength strongly influenced stability. Also, outboard stations primarily contributed to stability characteristics. Results demonstrate that changes in blade shape impact the calculated aerodynamic damping, indicating importance of using accurate blade operating shape under centrifugal and steady aerodynamic loading for flutter prediction. It was found that the calculated aerodynamic damping was relatively insensitive to variation in natural frequency.

Srivastava, R.↗
NASA NTRS1988

Flutter analysis of highly swept delta wings by conventional methods

The flutter boundaries of six thin highly-swept delta-platform wings have been calculated. Comparisons are made between experimental data and results using several aerodynamic methods. The aerodynamic methods used include a subsonic and supersonic kernel function, second order piston theory, and a transonic small disturbance code. The dynamic equations of motion are solved using analytically calculated mode shapes and frequencies.

Gibbons, M. D.↗
NASA NTRS1967

Subsonic and Supersonic Flutter Analysis of a Highly Tapered Swept-Wing Planform, Including Effects of Density Variation and Finite Wing Thickness, and Comparison with Experiments

The flutter characteristics of several wings with an aspect-ratio of 4.0, a taper ratio of 0.2, and a quarter-chord sweepback of 45 deg. have been investigated analytically for Mach numbers up to 2.0. The calculations were based on the modified-strip-analysis method, the subsonic-kernel-function method, piston theory, and quasi-steady second-order theory. Results of t h e analysis and comparisons with experiment indicated that: (1) Flutter speeds were accurately predicted by the modified strip analysis, although accuracy at t h e highest Mach numbers required the use of nonlinear aerodynamic theory (which accounts for effects of wing thickness) for the calculation of the aerodynamic parameters. (2) An abrupt increase of flutter-speed coefficient with increasing Mach number, observed experimentally in the transonic range, was also indicated by the modified strip analysis. (3) In the low supersonic range for some densities, a discontinuous variation of flutter frequency with Mach number was indicated by the modified strip analysis. An abrupt change of frequency appeared experimentally in the transonic range. (4) Differences in flutter-speed-coefficient levels obtained from tests at low supersonic Mach numbers in two wind tunnels were also predicted by the modified strip analysis and were shown to be caused primarily by differences in mass ratio. (5) Flutter speeds calculated by the subsonic-kernel-function method were in good agreement with experiment and with the results of the modified strip analysis. (6) Flutter speed obtained from piston theory and from quasi-steady second-order theory were higher than experimental values by at least 38 percent.

Yates, Carson, Jr.↗
NASA NTRS1984

Real-time flutter analysis

The important algorithm issues necessary to achieve a real time flutter monitoring system; namely, the guidelines for choosing appropriate model forms, reduction of the parameter convergence transient, handling multiple modes, the effect of over parameterization, and estimate accuracy predictions, both online and for experiment design are addressed. An approach for efficiently computing continuous-time flutter parameter Cramer-Rao estimate error bounds were developed. This enables a convincing comparison of theoretical and simulation results, as well as offline studies in preparation for a flight test. Theoretical predictions, simulation and flight test results from the NASA Drones for Aerodynamic and Structural Test (DAST) Program are compared.

Walker, R.↗
NASA NTRS2013

Flutter Analysis of the Thermal Protection Layer on the NASA HIAD

A combination of classical plate theory and a supersonic aerodynamic model is used to study the aeroelastic flutter behavior of a proposed thermal protection system (TPS) for the NASA HIAD. The analysis pertains to the rectangular configurations currently being tested in a NASA wind-tunnel facility, and may explain why oscillations of the articles could be observed. An analysis using a linear flat plate model indicated that flutter was possible well within the supersonic flow regime of the wind tunnel tests. A more complex nonlinear analysis of the TPS, taking into account any material curvature present due to the restraint system or substructure, indicated that significantly greater aerodynamic forcing is required for the onset of flutter. Chaotic and periodic limit cycle oscillations (LCOs) of the TPS are possible depending on how the curvature is imposed. When the pressure from the base substructure on the bottom of the TPS is used as the source of curvature, the flutter boundary increases rapidly and chaotic behavior is eliminated.

Goldman, Benjamin D.↗
NASA NTRS1981

Whirl flutter analysis of a horizontal-axis wind turbine with a two-bladed teetering rotor

Whirl flutter and the effect of pitch-flap coupling on teetering motion of a wind turbine were investigated. The equations of motion are derived for an idealized five-degree-of-freedom mathematical model of a horizontal-axis wind turbine with a two-bladed teetering rotor. The model accounts for the out-of-plane bending motion of each blade, the teetering motion of the rotor, and both the pitching and yawing motions of the rotor support. Results show that the design is free from whirl flutter. Selected results are presented indicating the effect of variations in rotor support damping, rotor support stiffness, and pitch-flap coupling on pitching, yawing, teetering, and blade bending motions.

Janetzke, D. C.↗
NASA NTRS1983

Whirl flutter analysis of a horizontal-axis wind turbine with a two-bladed teetering rotor

Whirl flutter and the effect of pitch-flap coupling on teetering motion of a wind turbine were investigated. The equations of motion are derived for an idealized five-degree-of-freedom mathematical model of a horizontal-axis wind turbine with a two-bladed teetering rotor. The model accounts for the out-of-plane bending motion of each blade, the teetering motion of the rotor, and both the pitching and yawing motions of the rotor support. Results show that the design is free from whirl flutter. Selected results are presented indicating the effect of variations in rotor support damping, rotor support stiffness, and pitch-flap coupling on pitching, yawing, teetering, and blade bending motions. Previously announced in STAR as N82-23707

Janetzke, D. C.↗
NASA NTRS1991

A vector unsymmetric eigenequation solver for nonlinear flutter analysis on high-performance computers

A finite element approach is presented for determining the nonlinear flutter characteristics of composite panels using unsteady, third-order piston theory aerodynamics. Both nonlinear structural (large-amplitude) and nonlinear aerodynamics terms are considered in the finite element formulation. Solution procedures are presented to solve the nonlinear panel flutter and the large-amplitude free vibration finite element equations. Nonlinear aerodynamic and linear structural finite element flutter results for composite panels are also presented. An efficient, vector-version generalized unsymmetric eigenequation solver is developed for large-amplitude vibration and nonlinear panel flutter analyses on high-performance computers.

Qin, Jiangning↗
NASA NTRS1980

Flutter analysis of an airplane with multiple structural nonlinearities in the control system

Experience has shown that the flutter prediction process for airplanes can be greatly affected by strong concentrated nonlinearities which may be localized in the linking elements of the control mechanism, in the pivot joints of variable-sweep-wing systems, and in the connecting points between wing and pylon-mounted external stores. The principle of equivalent linearization offers an efficent possibility for solving the related nonlinear flutter equations in the frequency domain as a complement to the well-known time domain procedures. Taking as an example an airplane with nonlinear control characteristics, it is demonstrated how the equivalent linearization approach can be extended to rather complicated systems with multiple sets of strongly interacting, concentrated nonlinearities.

Breitbach, E. J.↗
NASA NTRS2020

Flutter Analysis with Stabilized Finite Elements Based on the Linearized Frequency-Domain Approach

When designing and certifying aircraft, engineers must take into consideration aeroelastic effects such as flutter. Design and certification of a vehicle may require analysis of thousands of aeroelastic responses. Standard tools in the aerospace industry are based on linear aerodynamic models such as the doublet-lattice method, but these methods can be nonconservative in certain situations such as in the transonic regime. While computational fluid dynamics (CFD) is a higher fidelity alternative, the time-marching approach has a drastically increased computational cost compared to the linear aerodynamic methods. By taking advantage of the periodic nature of flutter, frequency-domain methods offer a more efficient alternative to time-marching CFD. In this work, a linearized frequency-domain method is implemented and verified in the stabilized finite-element solver in FUN3D. The linearized frequency-domain method is demonstrated and compared to other methods for traditional benchmark cases for computational aeroelasticity: the AGARD 445.6 wing, the Benchmark Supercritical Wing, and the Benchmark NACA 0012Wing.

Kevin E Jacobson↗
NASA NTRS1975

Vibration and flutter analysis of reusable surface insulation panels

A study has been conducted of the aeroelastic behavior of heat shield panels for the thermal protection system of the space shuttle. Questions of structural and aerodynamic modeling are considered along with the analysis of a single isotropic tile and an isotropic main substructure. Representative flutter results are presented, taking into account a rigid and a flexible metallic substructure.

Dowell, E. H.↗