SEARCH · Search NASA

Results for “functional additives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS2019

Characterization of Low-Temperature, Co-Fired Ceramic-Manufactured Electrostatic Thruster-Closeout Report

The goal of the project was to evaluate prototypes of an experimental thruster developed by the University of Arkansas (UA), Fayetteville, AR. The design under evaluation is a radio frequency (RF) electrostatic thruster that was fabricated using the low-temperature, co-fired ceramic (LTCC) materials and fabrication process. This materials system is analogous to printed circuit board (PCB) technology with the most significant difference being that the laminate is replaced by a ceramic material and the copper layer is replaced by printed sinterable silver paste. LTCC designs are baked after fabrication and assembled to realize an entirely monolithic structure with internal conductors, vias, and cavities. In this process, the LTCC electrostatic thruster (LTCC-ET) that is the subject of the present work becomes a monolithic ceramic thruster capable of withstanding temperatures in excess of 500 ºC. The UA and NASA Marshall Space Flight Center (MSFC) jointly performed prototype testing on the LTCC-ET under a NASA Cooperative Agreement Notice (CAN) award. The LTCC-ET was tested at MSFC in May 2018 over a 1-week period. There were two goals for the test program: (1) Testing to determine the operating parameters required to create plasma ignition in the test articles. This was explored by setting a propellant flowrate and increasing RF power until plasma ignition was observed. Testing was conducted with both argon and krypton. (2) Investigate the thrust and specific impulse (Isp) performance of the thruster as a function of propellant flowrate and grid voltage. This goal was not met during the project as technical challenges in maintaining stable plasma ignition arose due to stress and heating of the RF power feed. In summary, a prototype thruster design (consisting of three packaged units) was fabricated by UA and tested for the first time under vacuum conditions at MSFC to experimentally determine basic performance metrics and functionality. It was found that the design was not sufficiently optimized or robust enough in its initial iteration to support a significant test campaign or characterization program. It was concluded that the propellant outlet channels must be reduced in size with the flowpaths adjusted to increase propellant residence time in the thruster, and that the RF connector must be replaced with a version capable of handling higher power throughput and heating. However, even in its unoptimized form, a plasma could be produced in the LTCCET, demonstrating the efficacy of the design approach. The design is especially compelling due to its low cost to manufacture and, more importantly, its scalability of size and power throughput. Low cost and scalability are also important in that additional functionalities, such as thrust vectoring and plume charge neutralization, can be integrated into future designs with minimal additional cost. This project has matured the LTCC-ET development Technology Readiness Level (TRL) from 1 to 2. The low-cost RF plasma source portion of the LTCC device was matured from TRL 2 to 4 through the demonstration of RF plasma ignition under vacuum conditions.

Huang, P.-H. A.↗

NASA NTRSDate not supplied

Informing Wildfire Needs: The Expanded User Interface of NASA's Fire Information for Resource Management System (Firms)

As the global community continues to experience, and respond to, living in a changing environment, access to tools, technologies, and timely data utilized by an increasingly diverse set of stakeholders is increasing. This year, 2023, has thus far seen an unprecedented number of extreme events, increasingly driven by changes in the climate and a strong 2023 ENSO pattern. In Canada, a record number of wildfires, and associated weather events, evacuations, and infrastructure and habitat destruction has taken place, and is ongoing. Large swaths of Greece have experienced similar wildfire destruction. Most recently, Maui has experienced destructive wildfires, and early 2023 saw massive wildfires in Chile. NASA's Fire Information for Resource Management System, or FIRMS, has a fifteen-year history of providing timely and comprehensive data and information on wildfires to stakeholders. FIRMS was initially developed in 2007 by the University of Maryland, with funds from NASA's Applied Sciences Program and the United Nations Food and Agriculture Organization (UN FAO), to provide near real-time active fire Locations to natural resource managers that faced challenges obtaining timely satellite-derived fire information. FIRMS has consistently evolved to address the needs of stakeholders Living in a changing environment; in 2012 it transitioned to NASA LANCE and in 2021 through a partnership between NASA and the US Forest Service, an updated version of FIRMS was released for the US and Canada. As NASA and other federal agencies continue to accelerate Open Science through integrated efforts such as the Year of Open Science, the provision of readily discoverable, findable, accessible, interoperable, reusable data represents a major focus to facilitate equitable outcomes. FIRMS supports this acceleration in Open Science by continuing to provision data and information for its traditional user base, while addressing the novel user needs of an increasingly diverse set of stakeholders seeking robust, reliable, transparently generated data and information. Increasingly, FIRMS is utilized by citizen scientists and individuals directly affected by wildfires - through evacuations, risks to structures/homes, poor air quality. etc. FIRMS has also been Leveraged to detect and assess the impacts resulting from ongoing conflicts. This further highlights the multi-faceted impacts of wildfires and other events. In the Fall of 2023, FIRMS will release an expanded User Interface (UI). This interface captures and reflects the needs of, and input from, a multitude of users. These users range from federal agency representatives to non-government organizations to the private sector to citizen science entities. To respond to this expansive and diverse user need base, the updated FIRMS UI will capture a range of features to support those beginning to explore the range of data and tools available to inform wildfire awareness and knowledge. These users are supported through a Basic Mode interface, furnishing access to a light set of functionalities that provision straight-forward, readily usable information and data, and ingestible knowledge. The Advanced Mode interface supports those stakeholder groups already proficient in navigating FIRMS. These stakeholders, representing fire managers and others, perform active fire management and tactical wildfire response activities. For these stakeholders, additional datasets have been included which require in-depth knowledge of both the utility as well as the caveats of such datasets. Additional functionalities have also been embedded to aid specific user queries. The expanded UI will introduce a new Experimental Mode. The focus of this UI will be to support the provision of emerging and innovative datasets that are in development for review and comment by the user community Examples include post-fire products generated by NASA's Earth Information System (EIS) Fire. This presentation will provide an overview of the expanded FIRMS UI. We will discuss how this UI is designed to be scalable and support the unique needs of an expanding and diverse user base. We will highlight key features, elements, and datasets, and describe how user needs have informed and guided the design of the UI. We will also share recent use cases to convey, and increase awareness, among conference participants. As the global community faces more extreme wildfires, due to climate variability and change, there is an increased need for reliable data to inform, manage, and mitigate the impacts of these events. Through this work, NASA FIRMS is striving to level the playing field, by making information accessible to all; from policy makers to the private sector to historically marginalized communities. In doing so, NASA is promoting the all-hands-on-deck response needed to minimize the impacts of wildfires and harness the strengths of open science to address the greatest environmental challenge faced.

Jenny Hewson↗

DOE OSTI2020

Smelly-Odor Webtool (Smelly) v1

Smelly is an interactive webtool displaying odor dispersion from various potential waste-to-energy sites across California. It currently displays data for dry anaerobic digestion technology with organic waste intake of 90,000 tons per year. The model addresses meteorological and geographical differences in offsite odor impacts (Jin et al. 2019). In addition to interactive display of odor dispersions, the embedded emission calculator provides two additional functionalities: (1) determine the impact distance for given onsite odor emission rates; and (2) determine allowable odor emission rates at given separation distance between the facility and its downwind communities. Please note that data and model is preliminary at this point and serve as a Proof of Concept. Additional data collection, modeling and research is needed for final application.

Jin, Ling↗

DOE OSTI2023

Measurement of the production of a $W$ boson in association with a charmed hadron in $pp$ collisions at $\sqrt{s}$ = $\mathrm{13 TeV}$ with the ATLAS detector

The production of a $W$ boson in association with a single charm quark is studied using 140 fb –1 of $\sqrt{s}$ = $13$ $\mathrm{TeV}$ proton-proton collision data collected with the ATLAS detector at the Large Hadron Collider. The charm quark is tagged by the presence of a charmed hadron reconstructed with a secondary-vertex fit. The $W$ boson is reconstructed from the decay to either an electron or a muon and the missing transverse momentum present in the event. The charmed mesons reconstructed are D + → K – π + π + and D *+ → D 0 π + → (K – π + ) π + and the charge conjugate decays in the fiducial regions where $p$ T ($e,μ$) > 30 GeV, |$η(e,μ)$| < 2.5, $p$ T (D (*) ) > 8 GeV, and |$η$(D (*) )| < 2.2. The integrated and normalized differential cross sections as a function of the pseudorapidity of the lepton from the $W$ boson decay, and of the transverse momentum of the charmed hadron, are extracted from the data using a profile likelihood fit. The measured total fiducial cross sections are ${σ}_{fid}^{OS – SS}$ (W – + D + ) = 50.2 ± 0.2 ${(stat)}_{–2.3}^{+2.4}$(syst) pb, ${σ}_{fid}^{OS – SS}$ (W + + D – ) = 48.5 ± 0.2 ${(stat)}_{–2.2}^{+2.3}$(syst) pb, ${σ}_{fid}^{OS – SS}$ (W – + D *+ ) = 51.1 ± 0.4 ${(stat)}_{–1.8}^{+1.9}$(syst) pb, ${σ}_{fid}^{OS – SS}$ (W + + D *– ) = 50.0 ± 0.4 ${(stat)}_{–1.8}^{+1.9}$(syst) pb. Results are compared with the predictions of next-to-leading-order quantum chromodynamics calculations performed using state-of-the-art parton distribution functions. Additionally, the ratio of charm to anticharm production cross sections is studied to probe the $s$-$\bar{s}$ quark asymmetry. The ratio is found to be ${R}_{c}^{±}$= 0.971 ± 0.006 (stat) ± 0.011 (syst). The ratio and cross-section measurements are consistent with the predictions obtained with parton distribution function sets that have a symmetric $s$-$\bar{s}$ sea, indicating that any $s$-$\bar{s}$ asymmetry in the Bjorken-x region relevant for this measurement is small.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1993

Design of a resistojet for Space Station Freedom

In the mid 1990's, NASA will begin assembly of Space Station Freedom, a permanent outpost in a low-earth orbit. For the station to remain in that orbit, an altitude control system must be developed to resist the effects of atmospheric drag. One system being considered by NASA is called a resistojet, and it uses highly pressurized waste gases heated by electrical resistance to provide thrust on the order of 1 Newton. An additional function of the resistojet is to vent waste gases used by the station and its inhabitants. This report focuses on resolving the issues of system performance, flow and heater control, and materials selection and designing test procedures to resolve, by experimentation, any remaining issues. The conceptual model of the resistojet consists of a shell wrapped by a resistive coil with gases flowing internally through the tube with additional components such as regulators, transducers, and thermocouples. For system performance, the major parameters were calculated from the desired thrust range, the pressure within the resistojet and the cold flow mode of operation; waste gases were analyzed at 100 percent capacity and between 58.95 kPa and 552 kPa. The design team found that any ventilation under all conditions would produce thrust, and therefore, it was decided to limit the design of the ventilation function. The design team proceeded with a simplified model to determine the nozzle throat diameter and chamber diameter.

Garza, Jose↗

NASA NTRS1991

The role of clocks in operating deep space missions

Operation of deep space missions requires stable frequency references and clocks to perform several mission critical functions. These references are used in generating the telecommunication links to maintain communications between earth and spacecraft, in generating accurate doppler, range, and very long baseline interferometry (VLBI) observables for determining the spacecraft's time varying position, and to generate on-board timing information for clocking out timed commands and time tagging instrument data. In addition, science applications exist, particularly those utilizing radio instrumentation, which can require additional functions and levels of performance. The design necessary to support these functions affects both the spacecraft and the ground tracking stations. This paper provides a brief description of these functions and some of the key requirements needed to support them.

S. W. Asmar↗

DOE OSTI2020

Fused filament fabrication of polymer composites for extreme environments

Vast improvements have been made to the capabilities of advanced manufacturing (AM), yet there are still limitations on which materials can effectively be used in the technology. To this end, parts created using AM would benefit from the ability to be developed from feedstock materials incorporating additional functionality. A common three-dimensional (3D) printing polymer, acrylonitrile butadiene styrene, was combined with bismuth and polyvinylidene fluoride via a solvent treatment to fabricate multifunctional composite materials for AM. Composites of varying weight percent loadings were extruded into filaments, which were subsequently 3D printed into blocks via fused filament fabrication. Investigating the material properties demonstrated that in addition to the printed blocks successfully performing as radiation shields, the chemical, thermal, and mechanical properties are suitable for AM. Thus, this work demonstrates that it is possible to enhance AM components with augmented capabilities while not significantly altering the material properties which make AM possible.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Structural Insights into the Dynamics of Water in SOD1 Catalysis and Drug Interactions

Superoxide dismutase 1 (SOD1) is a crucial enzyme that protects cells from oxidative damage by converting superoxide radicals into H 2 O 2 and O 2 . This detoxification process, essential for cellular homeostasis, relies on a precisely orchestrated catalytic mechanism involving the copper cation, while the zinc cation contributes to the structural integrity of the enzyme. This study presents the 2.3 Å crystal structure of human SOD1 (PDB ID: 9IYK), revealing an assembly of six homodimers and twelve distinct active sites. The water molecules form a complex hydrogen-bonding network that drives proton transfer and sustains active site dynamics. Our structure also uncovers subtle conformational changes that highlight the intrinsic flexibility of SOD1, which is essential for its function. Additionally, we observe how these dynamic structural features may be linked to pathological mutations associated with amyotrophic lateral sclerosis (ALS). By advancing our understanding of hSOD1’s mechanistic intricacies and the influence of water coordination, this study offers valuable insights for developing therapeutic strategies targeting ALS. Our structure’s unique conformations and active site interactions illuminate new facets of hSOD1 function, underscoring the critical role of structural dynamics in enzyme catalysis. Moreover, we conducted a molecular docking analysis using SOD1 for potential radical scavengers and Abelson non-receptor tyrosine kinase (c-Abl, Abl1) inhibitors targeting misfolded SOD1 aggregation along with oxidative stress and apoptosis, respectively. The results showed that CHEMBL1075867, a free radical scavenger derivative, showed the most promising docking results and interactions at the binding site of hSOD1, highlighting its promising role for further studies against SOD1-mediated ALS.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2025

Synthesis and Characterization of Methacrylamide-Based Block Random Copolymers via Amine Functionalization of Polystyrene- Block -Poly(Pentafluorophenyl Methacrylate) Toward Enhanced Amenability to Manufacturing Criteria in Nanolithography

Recent interest in manipulating the chemistry of block copolymers (BCPs) to manage the covarying properties necessary to meet manufacturing criteria in nanolithography has resulted in the development and expansion of the A-block-(B-random-C) BCP architecture, where the random block allows for the decoupling of thermodynamic and wetting properties. Previous reports of such BCPs have used click chemistry to create the desired random block, but all such instances possess additional functional groups that are susceptible to undesirable side reactions upon annealing, such as cross-linking and surface grafting. This study reports the substitution reaction of polystyrene-block-poly(pentafluorophenyl methacrylate) (PS-b-PPFMA) with primary amines. The resulting methacrylamide structure of the functionalized random block has only an amide linkage between the attached functional group and the polymer backbone, thereby omitting any sources of side reactions within the BCP. The outcomes of this report also demonstrate the enhanced thermal stability of these materials by virtue of their stable amide bonds. A range of random copolymer compositions is assessed to develop BCPs in which the random block has approximately the same surface energy as the PS block. These BCPs can self-assemble into perpendicular lamellae and are therefore promising candidates for directed self-assembly.

block copolymers↗

DOE OSTI2023

Characterizing and Engineering Trehalose Biosynthesis Pathways to Improve Acetate Tolerance in Pseudomonas putida KT2440

Alkaline pretreatment can depolymerize lignin into a diverse mixture of monomers and smaller compounds, enabling bioconversion of these compounds to value-added chemicals in engineered bacterial hosts such as Pseudomonas putida KT2440. Acetate and salts comprise approximately 8% and 32% of the lignin stream, respectively. High concentrations of these components can cause cell death in P. putida, so lignin-derived streams must be fed in lower amounts to decrease stress. Investigation of the mechanisms of bacterial tolerance to chemicals in lignin-rich substrates is therefore required to overcome this obstacle in lignin bioconversion. Previous work has shown that trehalose, an endogenously produced disaccharide, is involved in tolerance to heat, cold, and osmotic stress, as well as implicated in acid stress in other bacteria. As such, trehalose biosynthesis presents a useful target to increase acetate and osmotic tolerance in P. putida. This work investigates the native TreSA, TreSB, and TreY/TreZ trehalose biosynthesis pathways in this bacterial strain as well as the OtsAB pathway of Sphingobium sp. SYK-6. Overexpression of the OtsAB pathway in P. putida increased tolerance to acetate relative to wild-type. Additionally, functional knockouts of treSA, treSB, treY, and treZ in P. putida showed that interruption of any trehalose biosynthesis pathway, and, in the case of TreY/TreZ, interruption of the pathway at any point, significantly hindered growth in acetate as well as on glucose and LB broth. Each trehalose biosynthesis pathway was then engineered for overexpression in P. putida to determine whether overexpression of these genes conferred additional tolerance to acetate. The TreSA, TreSB, OtsA, and OtsB enzymes were also expressed and purified to determine the reaction rates and kinetics of these pathways. The hypothetical glycoside hydrolase family 15 protein, encoded in the gene located in between otsB and otsA in the Sphingobium operon, was purified as well to investigate its potential involvement in the OtsAB pathway. The findings of this work illuminated the mechanisms of trehalose biosynthesis in P. putida and identified genetic targets to improve strain tolerance to common components of alkaline-pretreated lignin streams. These findings could ultimately improve yields of desired products from lignin in engineered strains of P. putida.

alkaline pretreatment↗

DOE OSTI2024

Extending Rucio with modern cloud storage support

Rucio is a software framework designed to facilitate scientific collaborations in efficiently organising, managing, and accessing extensive volumes of data through customizable policies. The framework enables data distribution across globally distributed locations and heterogeneous data centres, integrating various storage and network technologies into a unified federated entity. Rucio offers advanced features like distributed data recovery and adaptive replication, and it exhibits high scalability, modularity, and extensibility. Originally developed to meet the requirements of the high-energy physics experiment ATLAS, Rucio has been continuously expanded to support LHC experiments and diverse scientific communities. Recent R&D projects within these communities have evaluated the integration of both private and commercially-provided cloud storage systems, leading to the development of additional functionalities for seamless integration within Rucio. Furthermore, the underlying systems, FTS and GFAL/Davix, have been extended to cater to specific use cases. This contribution focuses on the technical aspects of this work, particularly the challenges encountered in building a generic interface for self-hosted cloud storage, such as MinIO or CEPH S3 Gateway, and established providers like Google Cloud Storage and Amazon Simple Storage Service. Additionally, the integration of decentralised clouds like SEAL is explored. Key aspects, including authentication and authorisation, direct and remote access, throughput and cost estimation, are highlighted, along with shared experiences in daily operations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

Investigation of Superluminescent Diodes for Smart Lighting Systems. Final Report

The solid-state lighting ecosystem has evolved very rapidly over the last few years, with significant improvements in the technical performance of light-emitting diodes (LEDs) and the commoditization of LED-based lighting fixtures. As the performance of conventional lighting products begins to saturate, there is growing market interest in “Lighting as a Service” applications that will leverage advanced systems to impart new functionalities to lighting and improve energy efficiency, human health, and productivity. These “Smart Lighting” systems will include high-performance light sources, specialized sensors, and dynamic controls to deliver high quality, energy efficient, color tunable lighting with customized spatial light delivery and integrated visible light communication capability. To achieve these capabilities, smart lighting systems will place greater demands on the performance of light sources. Highly efficient sources with additional functionalities compared to conventional LEDs, such as small form factor, large modulation bandwidth, and spatially coherent output beams, will be required. While laser diodes have been proposed as potential sources for smart lighting systems, they also exhibit several properties that pose challenges, such as temporal coherence, extremely high spatial coherence, and ultra-narrow linewidths. To address these issues, we propose an investigation of an alternative device architecture known as a superluminescent diode (SLD). SLDs are similar in form to ridge laser diodes and share many of the same characteristics, such as stimulated emission operation, spatially coherent output, small form factor, and the potential for large modulation bandwidth. However, the operating principle for SLDs is distinct from laser diodes in that SLDs lack a strong cavity feedback mechanism, resulting in spatially coherent but temporally incoherent light output. Thus, SLDs may address the issues with laser diodes for lighting, while simultaneously maintaining some of the desirable characteristics of both laser diodes and LEDs. The objectives of this proposal are to design, grow, and fabricate blue (450 nm) SLDs on polar c-plane and nonpolar m-plane free-standing GaN substrates, and to evaluate their potential as sources in smart lighting systems through basic device characterization and detailed investigations of their efficiency droop and modulation bandwidth. The primary scientific aims of this work are to understand the fundamental role of optical gain in the superluminescent (non-lasing) regime on efficiency droop and modulation bandwidth in III-nitride emitters and to understand the effects of higher optical gain on SLD performance by comparing polar c-plane and nonpolar m-plane SLDs. The University of New Mexico (UNM) will collaborate with Sandia National Laboratories (SNL) and the Center for Integrated Nanotechnologies to design, fabricate, grow, and characterize the SLDs. UNM will perform the design and epitaxial growth, while SNL will focus on the fabrication and device characterization. The novelty of the proposed work includes the first comprehensive theoretical and experimental investigations of efficiency droop and the first investigation of modulation bandwidth in GaN-based emitters operating in the superluminescent regime. Moreover, the comparison of c-plane and m-plane SLDs will enable the first analysis of the effects of higher optical gain on the device performance. The development of high-performance GaN-based SLDs may enable efficiency gains and improved functionality in next-generation smart lighting systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

NASA NTRS1980

Introduction: The challenge of optimum integration of propulsion systems and large space structures

A functional matrix of possible propulsion system characteristics for a spacecraft for deployable and assembled spacecraft structures shows that either electric propulsion or low thrust chemical propulsion systems could provide the propulsion required. The trade-off considerations of a single propulsion engine or multiengines are outlined and it is shown that a single point engine is bounded by some upper limit of thrust for assembled spacecraft. The matrix also shows several additional functions that can be provided to the spacecraft if a propulsion system is an integral part of the spacecraft. A review of all of the functions that can be provided for a spacecraft by an integral propulsion system may result in the inclusion of the propulsion for several functions even if no single function were mandatory. Propulsion interface issues for each combination of engines are identified.

Carlisle, R. F.↗

DOE OSTI2020

Deprotection of N ‐ tert ‐Butoxycarbonyl (Boc) Protected Functionalized Heteroarenes via Addition–Elimination with 3‐Methoxypropylamine

Continued pursuit of functionalized soft‐N‐donor complexant scaffolds with favorable solubility and kinetics profiles applicable for the separation of the trivalent minor actinides from the lanthanides has attracted significant interest over the last three decades. Recent work from this laboratory resulted in the production of various N ‐Boc protected [1,2,4]triazinyl‐pyridin‐2‐yl indole Lewis basic procomplexants which necessitated the removal of the indole N ‐Boc protecting group prior to evaluation of complexant efficacy in separations assays. Traditional deprotection strategies involving trifluoroacetic and other protic and Lewis acids proved unsuccessful in removal of the recalcitrant indole‐ N ‐Boc protecting group necessitating the development of a new strategy for deprotection of this complexant class. A serendipitous result facilitated utilization of 3‐methoxypropylamine as a mild deprotecting agent for various N ‐Boc protected heteroarenes via a proposed addition–elimination mechanism. Method development, application to various heteroarenes including indoles, 1,2‐indazoles, 1,2‐pyrazoles, and related derivatives, a ten‐fold scale‐up reaction, and experimental evaluation of a preliminary mechanistic hypothesis are reported herein.

Gulledge, Zachary Z.↗

DOE OSTI2026

Ripening of Rh Nanoparticle Catalysts in Reverse Water–Gas Shift via a Data-Driven Model Combining Physics, Theory, and Experiment

Degradation via sintering is an ongoing challenge that impedes the broad commercial success of supported metallic nanoparticle catalysts. To mitigate degradation via informed catalyst design and process operations, here we aim to disambiguate the underlying mechanisms of sintering by combining theory and experiment in a quantitative framework. While mechanistic sintering models exist, they only model a single sintering pathway, even though multiple sintering mechanisms can occur simultaneously or dominate at different stages of the process. Data-driven machine learning models have emerged as a means to represent complex processes through data regression. However, machine learning models have very large data needs and lack mechanistic insights due to their black-box encoding. To develop an interpretive model of catalyst degradation via sintering, we constructed a hybrid model combining mechanistic “physics-based” models and data-driven methods to obtain both reliable predictions and mechanistic insights regarding experimentally observed sintering phenomena. Focusing on nanoparticle sintering in the Rh–TiO 2 catalyst for the reverse water–gas shift (RWGS) reaction, the hybrid model couples a mechanistic term for Ostwald ripening with energy values calculated via density functional theory (DFT) with a parametric, data-driven discrepancy function term for unmodeled mechanisms. The hybrid model is trained using Bayesian inference with data collected from small-angle X-ray scattering (SAXS) in situ experiments wherein average nanoparticle diameter versus time was measured at three relevant operating temperatures. The calibrated hybrid model results show that an Ostwald ripening-only model parameterized with fixed DFT energies does not fully capture the time and temperature dependence of the SAXS-observed sintering kinetics, and that an additional functional contribution, or DFT energy calibration, is required to reconcile simulation and experiment. Analysis of the hybrid-model error confirms that the hybrid model outperforms both the purely mechanistic and purely data-driven alternatives in terms of expected predictive accuracy for time-evolving average particle sizes. Furthermore, the results support the hypothesis that the Ostwald ripening mechanism is less important for explaining the sintering phenomena as operating temperature increases under an assumed fixed DFT parameterization. This could be explained in one of two ways: either latent, unmodeled sintering mechanisms dominate at higher temperatures, or the DFT uncertainty increases with temperature. The proposed modeling approach directly links theory to experiments and simulations via a statistical hybrid modeling framework and can be extended to other catalytic systems to improve predictive models and mechanistic understanding.

Bayesian hybrid modeling↗

NASA NTRS2004

Tradeoffs in Flight Design Upset Mitigation in State of the Art FPGAs: Hardened by Design vs. Design Level Hardening

This presentation compares and contrasts the effectiveness and the system/designer impacts of the two main approaches to upset hardening: the Actel approach (RTSX-S and RTAX-S) of low-level (inside each flip-flop) triplication and the Xilinx approach (Virtex and Virtex2) of design-level triplication of both functional blocks and voters. The effectiveness of these approaches is compared using measurements made in conjunction with each of the FPGAs' manufacturer: for Actel, published data [1] and for Xilinx, recent results from the Xilinx SEE Test Consortium (note that the author is an active and founding member). The impacts involve Actel advantages in the areas of transistor-utilization efficiency and minimizing designer involvement in the triplication while the Xilinx advantages relate to the ability to custom tailor upset hardness and the flexibility of re-configurability. Additionally, there are currently clear Xilinx advantages in available features such as the number of I/O's, logic cells, and RAM blocks as well as speed. However, the advantage of the Actel anti-fuses for configuration over the Xilinx SRAM cells is that the latter need additional functionality and external circuitry (PROMs and, at least a watchdog timer) for configuration and configuration scrubbing. Further, although effectively mitigated if done correctly, the proton upset-ability of the Xilinx FPGAs is a concern in severe proton-rich environments. Ultimately, both manufacturers' upset hardening is limited by SEFI (single-event functional interrupt) rates where it appears the Actel results are better although the Xilinx Virtex2-family result of about one SEFI in 65 device-years in solar-min GCR (the more intense part of the galactic cosmic-ray background) should be acceptable to most missions

radiation effects↗

DOE OSTI2022

Structure and Fc-Effector Function of Rhesusized Variants of Human Anti-HIV-1 IgG1s

Passive transfer of monoclonal antibodies (mAbs) of human origin into Non-Human Primates (NHPs), especially those which function predominantly by a Fc-effector mechanism, requires an a priori preparation step, in which the human mAb is reengineered to an equivalent NHP IgG subclass. This can be achieved by changing both the Fc and Fab sequence while simultaneously maintaining the epitope specificity of the parent antibody. This Ab reengineering process, referred to as rhesusization, can be challenging because the simple grafting of the complementarity determining regions (CDRs) into an NHP IgG subclass may impact the functionality of the mAb. Here we describe the successful rhesusization of a set of human mAbs targeting HIV-1 envelope (Env) epitopes involved in potent Fc-effector function against the virus. This set includes a mAb targeting a linear gp120 V1V2 epitope isolated from a RV144 vaccinee, a gp120 conformational epitope within the Cluster A region isolated from a RV305 vaccinated individual, and a linear gp41 epitope within the immunodominant Cys-loop region commonly targeted by most HIV-1 infected individuals. Structural analyses confirm that the rhesusized variants bind their respective Env antigens with almost identical specificity preserving epitope footprints and most antigen-Fab atomic contacts with constant regions folded as in control RM IgG1s. In addition, functional analyses confirm preservation of the Fc effector function of the rhesusized mAbs including the ability to mediate Antibody Dependent Cell-mediated Cytotoxicity (ADCC) and antibody dependent cellular phagocytosis by monocytes (ADCP) and neutrophils (ADNP) with potencies comparable to native macaque antibodies of similar specificity. While the antibodies chosen here are relevant for the examination of the correlates of protection in HIV-1 vaccine trials, the methods used are generally applicable to antibodies for other purposes.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

Green synthesis of reduced Ti 3 C 2 T x MXene nanosheets with enhanced conductivity, oxidation stability, and SERS activity

Transition metal carbides (MXenes) are an emerging family of highly conductive two-dimensional materials with additional functional properties introduced by surface terminations. Further modification of the surface terminations makes MXenes even more appealing for practical applications. Herein, we report a facile and environmentally benign synthesis of reduced Ti 3 C 2 T x MXene (r-Ti 3 C 2 T x ) via a simple treatment with L-ascorbic acid at room temperature. r-Ti 3 C 2 T x shows a six-fold increase in electrical conductivity, from 471 ± 49 for regular Ti 3 C 2 T x to 2819 ± 306 S m -1 for the reduced version. Additionally, we show an enhanced oxidation stability of r-Ti 3 C 2 T x as compared to regular Ti 3 C 2 T x . An examination of the surface-enhanced Raman scattering (SERS) activity reveals that the SERS enhancement factor of r-Ti 3 C 2 T x is an order of magnitude higher than that of regular Ti 3 C 2 T x . The improved SERS activity of r-Ti 3 C 2 T x is attributed to the charge transfer interaction between the MXene surface and probe molecules, re-enforced by an increased electronic density of states (DOS) at the Fermi level of r-Ti 3 C 2 T x . The findings of this study suggest that reduced MXene could be a superior choice over regular MXene, especially for the applications that employ high electronic conductivity, such as electrode materials for batteries and supercapacitors, photodetectors, and SERS-based sensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗