Search NASA⌕ Search

SEARCH · Search NASA

Results for “gas atomization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Study on the continuous phase evolution and physical properties of gas-atomized high-entropy alloy powders

In this study, AlCoCrFeNi high entropy alloy (HEA) powders were fabricated by gas atomization process, and the effects of annealing heat treatment on phase evolution and mechanical properties were investigated. The as-atomized powders have pure BCC phase with a spherical shape and equal composition distribution, and then the FCC and sigma phase sequentially generated after annealing. The mechanical property such as hardness was evidently enhanced, which was caused by precipitation hardening effect. After the raw powders were annealed at 600 °C, the FCC (Al–Ni) phase began to precipitate, the its phase intensity raised with the annealing temperature. Then, the sigma phase (Fe– Cr)formed as the annealing temperature reached 800 °C. Both mechanical properties and lattice constant were influenced by heating effect. According to the results, the lattice became loose with the increasing temperature. In summary, the mechanical properties and phase constitutions of gasatomized AlCoCrFeNi HEA powders can be adjusted via annealing process, resulting in precipitation hardening effect.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Measurements of an Ablator-Gas Atomic Mix in Indirectly Driven Implosions at the National Ignition Facility

We present the first results from an experimental campaign to measure the atomic ablator-gas mix in the deceleration phase of gas-filled capsule implosions on the National Ignition Facility. Plastic capsules containing CD layers were filled with tritium gas; as the reactants are initially separated, DT fusion yield provides a direct measure of the atomic mix of ablator into the hot spot gas. Capsules were imploded with x rays generated in hohlraums with peak radiation temperatures of ~294 eV. While the TT fusion reaction probes conditions in the central part (core) of the implosion hot spot, the DT reaction probes a mixed region on the outer part of the hot spot near the ablator–hot-spot interface. Experimental data were used to develop and validate the atomic-mix model used in two-dimensional simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The ratio of molecular to atomic gas in spiral galaxies as a function of morphological type

In order to gain an understanding of the global processes which influence cloud and star formation in disk galaxies, it is necessary to determine the relative amounts of atomic, molecular, and ionized gas both as a function of position in galaxies and from galaxy to galaxy. With observations of the CO distributions in over 200 galaxies now completed as part of the Five College Radio Astronomy Observatory (FCRAO) Extragalactic CO Survey (Young et al. 1989), researchers are finally in a position to determine the type dependence of the molecular content of spiral galaxies, along with the ratio of molecular to atomic gas as a function of type. Do late type spirals really have more gas than early types when the molecular gas content is included. Researchers conclude that there is more than an order of magnitude decrease in the ratio of molecular to atomic gas mass as a function of morphological type from Sa-Sd; an average Sa galaxy has more molecular than atomic gas, and an average Sc has less. Therefore, the total interstellar gas mass to blue luminosity ratio, M sub gas/L sub B, increases by less than a factor of two as a function of type from Sa-Sd. The dominant effect found is that the phase of the gas in the cool interstellar medium (ISM) varies along the Hubble sequence. Researchers suggest that the more massive and centrally concentrated galaxies are able to achieve a molecular-dominated ISM through the collection of more gas in the potential. That gas may then form molecular clouds when a critical density is exceeded. The picture which these observations support is one in which the conversion of atomic gas to molecular gas is a global process which depends on large scale dynamics (cf Wyse 1986). Among interacting and merging systems, researchers find considerable scatter in the M(H2)/M(HI) ratio, with the mean ratio similar to that in the early type galaxies. The high global ratio of molecular to atomic gas could result from the removal of HI gas, the enhanced conversion of HI into H2, or both.

Knezek, Patricia M.↗

MOLECULAR AND ATOMIC GAS IN THE LARGE MAGELLANIC CLOUD. I. CONDITIONS FOR CO DETECTION

We analyze the conditions for detection of CO(1-0) emission in the Large Magellanic Cloud, using the recently completed second NANTEN CO survey. In particular, we investigate correlations between CO integrated intensity and H I integrated intensity, peak brightness temperature, and line width at a resolution of 2.'6 ({approx}40 pc). We find that significant H I column density (exceeding {approx}10{sup 21} cm{sup -2}) and peak brightness temperature (exceeding {approx}20 K) are necessary but not sufficient conditions for CO detection, with many regions of strong H I emission not associated with molecular clouds. The large scatter in CO intensities for a given H I intensity persists even when averaging on scales of >200 pc, indicating that the scatter is not solely due to local conversion of H I into H{sub 2} near GMCs. We focus on two possibilities to account for this scatter: either there exist spatial variations in the I(CO) to N(H{sub 2}) conversion factor, or a significant fraction of the atomic gas is not involved in molecular cloud formation. A weak tendency for CO emission to be suppressed for large H I linewidths supports the second hypothesis, insofar as large linewidths may be indicative of warm H I, and calls into question the likelihood of forming molecular clouds from colliding H I flows. We also find that the ratio of molecular to atomic gas shows no significant correlation (or anticorrelation) with the stellar surface density, though a correlation with midplane hydrostatic pressure P{sub h} is found when the data are binned in P{sub h} . The latter correlation largely reflects the increasing likelihood of CO detection at high H I column density.

99 GENERAL AND MISCELLANEOUS↗

Compression as a Tool to Detect Bose Glass in a Cold Atomic Gas

We suggest that measuring the variation of the radius of an atomic cloud when the harmonic trap confinement is varied makes it possible to monitor the disappearance of the insulating Mott phase of an ultracold atomic gas trapped in a disordered optical lattice. This paves the way for an unambiguous identification of a Bose glass phase in the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic properties and microstructure of gas atomized MRE2(Fe, Co)14B powder with ZrC addition (MRE=Nd + Y + Dy)

Gas atomization powder with Zr substitutions for the MRE and ZrC additions were systematically studied. The results show that the partial substitutions of Zr and the ZrC additions effectively improved glass formability in the alloys. Scanning electron microscopy (SEM) revealed that the as-atomized powder with a particle size of less than 32 {micro}m is predominately uniform equiaxed grains with an average grain size of 1.5 {micro}m. X-ray diffraction and differential thermal analysis measurements detected very tiny amounts of amorphous phase. After annealing at 700 C for 15 min, the SEM grain microstructure exhibits a minor change, but magnetic properties are substantially improved. M versus T measurements reveal that the phase composition evolved from 2:14:1 plus a small amount of 2:17 phases to a single 2:14:1 phase during the annealing process. The sieve analysis of the powders showed a particle size distribution with 90 wt % of the powder less than 45 {micro}m. The magnetic properties of the annealed powder varied with particle size. (BH){sub max} first increases with increasing particle size from 5 {micro}m, reaches the peak value in the size range of 20-25 {micro}m, and then decreases with increasing particle size. For the 20-25 {micro}m powder sample annealed at 700 C for 15 min, the (BH){sub max} of 9.6 MG Oe at room temperature and 5.6 MG Oe at 200 C were obtained, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Light-induced torque for the generation of persistent current flow in atomic gas Bose-Einstein condensates

We show that a persistent current flow in an atomic gas Bose-Einstein condensate could be realized when the system is subject to two counterpropagating Laguerre-Gaussian so-called doughnut beams, creating a toroidal trap. The theory is developed involving a two-photon process within three atomic levels leading to a quantized light-induced torque which rotates the atoms, generating an atomic current flow in the ring. We also show that it is possible for the torque to be controlled and even switched on and off by varying the frequencies of the incident light, thereby allowing a mechanism for the control of the current flow.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

STAR FORMATION IN ATOMIC GAS

Observations of nearby galaxies have firmly established, over a broad range of galactic environments and metallicities, that star formation occurs exclusively in the molecular phase of the interstellar medium (ISM). Theoretical models show that this association results from the correlation between chemical phase, shielding, and temperature. Interstellar gas converts from atomic to molecular only in regions that are well shielded from interstellar ultraviolet (UV) photons, and since UV photons are also the dominant source of interstellar heating, only in these shielded regions does the gas become cold enough to be subject to Jeans instability. However, while the equilibrium temperature and chemical state of interstellar gas are well correlated, the timescale required to reach chemical equilibrium is much longer than that required to reach thermal equilibrium, and both timescales are metallicity-dependent. Here I show that the difference in timescales implies that, at metallicities below a few percent of the solar value, well shielded gas will reach low temperatures and proceed to star formation before the bulk of it is able to convert from atomic to molecular. As a result, at extremely low metallicities, star formation will occur in a cold atomic phase of the ISM rather than a molecular phase. I calculate the observable consequences of this result for star formation in low-metallicity galaxies, and I discuss how some current numerical models for H{sub 2}-regulated star formation may need to be modified.

79 ASTRONOMY AND ASTROPHYSICS↗

On the Correlation between Atomic Gas and Bars in Galaxies

We analyze the correlation between properties of large-scale bars and atomic gas content of galaxies to explore the role of H i gas on bar evolution in galaxies. We show that the absolute bar size depends strongly on total stellar mass of galaxies and does not change significantly with H i gas fraction at fixed stellar mass. Furthermore, the physical size of the bar is small and nearly constant in high H i gas fraction and low-mass galaxies and becomes larger with increasing galactic stellar mass in low gas fraction galaxies. When the stellar masses are fixed, the relative bar length normalized to the disk shows a decrease with increasing H i gas fraction due to the larger disks in gas-richer galaxies. We measure the gas deficiency of the samples and find that the gas-rich galaxies have longer and stronger bars compared with the H i gas-deficient galaxies at fixed stellar mass, especially for the massive ones. When splitting the samples into star-forming and quiescent subgroups, the star-forming galaxies tend to have longer bars than the quiescent ones at fixed stellar mass and gas deficiency. In addition, our results suggest two different types of bar properties, in which the bars in gas-rich galaxies grow longer but retain similar axial ratio over time, while they grow longer and fatter over time in gas-poor galaxies.

74 ATOMIC AND MOLECULAR PHYSICS↗

Gas Atomization Equipment Statement of Work and Specification for Engineering design, Fabrication, Testing, and Installation

The Gas Atomization Equipment will be used to fabricate metallic powder suitable for Powder Bed Fusion additive Manufacturing material to support Lawrence Livermore National Laboratory (LLNL) research and development. The project will modernize our capabilities to develop spherical reactive, refractory, and radioactive powders in the 10-75 μm diameter size range at LLNL.

42 ENGINEERING↗

Large-scale production of (GeTe) x (AgSbTe 2 ) 100$-$x (x=75, 80, 85, 90) with enhanced thermoelectric properties via gas-atomization and spark plasma sintering

(GeTe) x (AgSbTe 2 ) 100$-$x : TAGS thermoelectrics are an attractive class of materials due to their combination of non-toxicity and good conversion efficiency at mid-temperature ranges. Here in the present work, we have utilized energy and time efficient high-pressure gas atomization and spark-plasma sintering techniques for large-scale preparation of samples with varying composition (i.e., (GeTe) x (AgSbTe 2 ) 100$-$x where x = 75, 80, 85, and 90). High-temperature x-ray diffraction was used to understand the phase transformation mechanism of the as-atomized powders. Detailed high-resolution transmission electron microscopy of the sintered samples revealed the presence of nanoscale precipitates, antiphase, and twin boundaries. The nanoscale twins and antiphase boundaries serve as phonon scattering centers, leading to the reduction of total thermal conductivity in TAGS-80 and 90 samples. The maximum ZT obtained was 1.56 at 623 K for TAGS-90, which was ~94% improvement compared to values previously reported. The presence of the twin boundaries also resulted in a high fracture toughness (K IC ) of the TAGS-90 sample due to inhibition of dislocation movement at the twin boundary.

36 MATERIALS SCIENCE↗

Transverse-Field Ising Dynamics in a Rydberg-Dressed Atomic Gas

Here, we report on the realization of long-range Ising interactions in a cold gas of cesium atoms by Rydberg dressing. The interactions are enhanced by coupling to Rydberg states in the vicinity of a Förster resonance. We characterize the interactions by measuring the mean-field shift of the clock transition via Ramsey spectroscopy, observing one-axis twisting dynamics. We furthermore emulate a transverse-field Ising model by periodic application of a microwave field and detect dynamical signatures of the paramagnetic-ferromagnetic phase transition. Our results highlight the power of optical addressing for achieving local and dynamical control of interactions, enabling prospects ranging from investigating Floquet quantum criticality to producing tunable-range spin squeezing.

74 ATOMIC AND MOLECULAR PHYSICS↗

In-situ synchrotron X-ray investigation of phase evolution in gas atomized powder enabling manufacturing of nanoscale oxide-dispersion strengthened ferritic steels

Here, we present an investigation of Fe-14Cr-3W-0.4Y-0.4Zr-0.18Ti (wt.%) as a reduced-activation oxide-dispersion strengthened (ODS) ferritic steel, an alternative to the “14YWT” structural alloys designed for nuclear energy applications. Gas atomization reaction synthesis (GARS) was used to produce these Zr-modified powders with a non-equilibrium (metastable) phase that enable a heat treatment (delayed) route for producing nanoscale oxide-dispersion strengthening. In situ synchrotron X-ray diffraction and transmission electron microscopy were used to analyze phase evolution as a function of temperature and time, revealing formation of highly dispersed oxide nanoprecipitate phases at temperatures above those needed for powder consolidation and shaping of components. This would allow fabrication of net-shape parts using conventional powder-processing methods prior to thermal activation of a reaction producing nanocrystalline Y-(Ti, Zr)-O particles, with a size of 20 ± 7 nm. These results can inform processing of tubes, cladding, sheets, and plates for use in advanced fission and fusion reactors.

In-situ synchrotron X-ray diffraction↗

No ball milling needed: Alternative ODS steel manufacturing with gas atomization reaction synthesis (GARS) and friction-based processing

Oxide dispersion strengthened (ODS) steels are promising structural materials for future fusion reactors. The high-density (~10 23 /m 3 ) of highly stable Y-(Ti)-O nano-oxides provide high sink strength for radiation resistance and high-temperature (> 650 °C) creep strength. Concomitantly, helium management is enabled by trapping high density (~10 23 /m 3 ) of small (< 3 nm) helium bubbles in the vicinity of nano-oxides. However, conventional route of making ODS steels involves prolonged ball milling, canning, degassing, and laborious thermo-mechanical processing (TMP). Such route, especially the batch-by-batch ball milling step, faces persistent challenge with scalability and high costs. Gas atomization reaction synthesis (GARS) method has demonstrated the potential of making precursor ODS steel powders without ball milling, but the nano-oxide density was around 10 21 /m 3 in the final consolidated form by conventional TMP. Taking advantage of GARS precursor powder, we use friction-based processing, including friction consolidation and extrusion, to manufacture ODS steel with further improved nano-oxide characteristics. Here, preliminary results showed that Y/Ti/O species were intimately mixed and rapidly reacted to form nano-oxides with a number density of ~10 22 /m 3 .

36 MATERIALS SCIENCE↗

A radio jet drives a molecular and atomic gas outflow in multiple regions within one square kiloparsec of the nucleus of the nearby galaxy IC5063

We analyzed near-infrared data of the nearby galaxy IC5063 taken with the Very Large Telescope SINFONI instrument. IC5063 is an elliptical galaxy that has a radio jet nearly aligned with the major axis of a gas disk in its center. The data reveal multiple signatures of molecular and atomic gas that has been kinematically distorted by the passage of the jet plasma or cocoon within an area of ∼1 kpc{sup 2}. Concrete evidence that the interaction of the jet with the gas causes the gas to accelerate comes from the detection of outflows in four different regions along the jet trail: near the two radio lobes, between the radio emission tip and the optical narrow-line-region cone, and at a region with diffuse 17.8 GHz emission midway between the nucleus and the north radio lobe. The outflow in the latter region is biconical, centered 240 pc away from the nucleus, and oriented perpendicularly to the jet trail. The diffuse emission that is observed as a result of the gas entrainment or scattering unfolds around the trail and away from the nucleus with increasing velocity. It overall extends for ≳700 pc parallel and perpendicular to the trail. Near the outflow starting points, the gas has a velocity excess of 600–1200 km s{sup −1} with respect to ordered motions, as seen in [Fe ii], Paα, or H{sub 2} lines. High H{sub 2} (1-0) S(3)/S(1) flux ratios indicate non-thermal excitation of gas in the diffuse outflow.

79 ASTRONOMY AND ASTROPHYSICS↗

Elastic Scattering of Ultrashort Laser Pulses on Noble Gas Atoms

The work deals with a theoretical investigation of elastic scattering of ultrashort electromagnetic pulses (USP) on the noble gas atoms in the far ultra-violet and soft X-ray regions. The investigation is performed within the framework of a dipole approximation and the first-order quantum-mechanics perturbation theory. Major attention is given to the study of the dependence of the total probability of scattering within the pulse time on the USP duration at different carrying frequency values. It is shown that at certain values of the problem parameters this dependence is nonlinear. The calculations are performed for the corrected Gaussian pulses and wavelet pulses without the carrying frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗