Search NASA⌕ Search

SEARCH · Search NASA

Results for “generator parameter estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Novel Estimation of Pilot Performance Characteristics

Two mechanisms internal to the pilot that affect performance during a tracking task are: 1) Pilot equalization (i.e. lead/lag); and 2) Pilot gain (i.e. sensitivity to the error signal). For some applications McRuer's Crossover Model can be used to anticipate what equalization will be employed to control a vehicle's dynamics. McRuer also established approximate time delays associated with different types of equalization - the more cognitive processing that is required due to equalization difficulty, the larger the time delay. However, the Crossover Model does not predict what the pilot gain will be. A nonlinear pilot control technique, observed and coined by the authors as 'amplitude clipping', is shown to improve stability, performance, and reduce workload when employed with vehicle dynamics that require high lead compensation by the pilot. Combining linear and nonlinear methods a novel approach is used to measure the pilot control parameters when amplitude clipping is present, allowing precise measurement in real time of key pilot control parameters. Based on the results of an experiment which was designed to probe workload primary drivers, a method is developed that estimates pilot spare capacity from readily observable measures and is tested for generality using multi-axis flight data. This paper documents the initial steps to developing a novel, simple objective metric for assessing pilot workload and its variation over time across a wide variety of tasks. Additionally, it offers a tangible, easily implementable methodology for anticipating a pilot's operating parameters and workload, and an effective design tool. The model shows promise in being able to precisely predict the actual pilot settings and workload, and observed tolerance of pilot parameter variation over the course of operation. Finally, an approach is proposed for generating Cooper-Harper ratings based on the workload and parameter estimation methodology.

Human pilot models↗

Inclusion of unsteady aerodynamics in longitudinal parameter estimation from flight data

A simple vortex system, used to model unsteady aerodynamic effects into the rigid body longitudinal equations of motion of an aircraft, is described. The equations are used in the development of a parameter extraction algorithm. Use of the two parameter-estimation modes, one including and the other omitting unsteady aerodynamic modeling, is discussed as a means of estimating some acceleration derivatives. Computer generated data and flight data, used to demonstrate the use of the parameter-extraction algorithm are studied.

Queijo, M. J.↗

Satellite altimetry applied to marine geoid determination

The pioneering satellite radar altimeter aboard Skylab has provided a wealth of information about ocean surface topography for both the oceanographic and geodetic communities. This report describes typical satellite altimetry concepts and discusses the parameters measured, geometry utilized, and techniques employed to generate ocean geoid estimates. The standard deviation of the noise on the altitude measurements is shown to range from one to three meters when the altimeter antenna is nadir aligned. The altimeter is shown to sense short wavelength ocean surface features which are not included in present conventional global geoids. An estimate of a local geoid in the Atlantic, using only altimeter data, is presented. Finally, results demonstrate that the Skylab radar altimeter system capability is less than 10 meters RMS.

Leitao, C. D.↗

A Monte Carlo/response surface strategy for sensitivity analysis: application to a dynamic model of vegetative plant growth

We describe the application of a strategy for conducting a sensitivity analysis for a complex dynamic model. The procedure involves preliminary screening of parameter sensitivities by numerical estimation of linear sensitivity coefficients, followed by generation of a response surface based on Monte Carlo simulation. Application is to a physiological model of the vegetative growth of soybean plants. The analysis provides insights as to the relative importance of certain physiological processes in controlling plant growth. Advantages and disadvantages of the strategy are discussed.

Non-NASA Center↗

The effects of correlation on goodness of fit

Autocorrelated normal random variates were generated via computer and the effects of various levels of correlation on goodness of fit problems were studied. The results are useful in determining the distribution or estimating the parameters of populations that correlate observations such as wind speeds and temperature. The model used to generate the autocorrelated data is an autoregressive process of order 1. The Kolmogorov-Smirnov and chi-square statistics are used in the analysis. It was observed in the simulation that high positive correlations tend to shift the sample mean away from the population mean and negative correlations tend to shift the sample mean towards the population mean. In many cases, it was observed that positive and negative correlations tend to decrease the standard deviation. However, since this did not occur in all cases, no definite conclusion can be made regarding the standard deviation. Since the autoregressive process is a linear transformation, it is not surprising that normality was preserved. However, a possible extension of this problem could be to generate non-normal data and observe how the distribution is affected by correlation. Another extension might utilize another model such as autoregressive of order k or a moving average process of order k.

Kitchens, L. J.↗

Study of the energy spectrum of primary cosmic rays: EAS size fluctuations at a fixed primary energy

During the initial period of the Samarkand EAS array operations the showers were selected on the basis of charged-particle flux density, and during the subsequent periods the showers were selected on the basis of Cerenkov light flux density. This procedure made it possible to measure the shower energy, to estimate the EAS size fluctuations at a fixed primary energy, and to experimentally obtain the scaling factor K(Ne, Eo) from the EAS size spectrum to the primary energy spectrum. Six scintillators of area S = 2 sq m each were added to the array. The fluctuations of EAS sizes in the showers of fixed primary energies and the scaling factors K(Ne, Eo) were inferred from the data obtained. The showers with zenith angles 30 deg were selected. The EAS axis positions were inferred from the amplitude data of the scintillators. The primary energy Eo was determined by the method of least squares for the known EAS axis position using the data of the Cerenkov detector located at 80 to 150 m EAS axis. It is shown that the Cerenkov light flux fluctuations at 100 m from EAS axis, q sub 100, do not exceed 10% at a fixed EAS energy, so the parameter q sub 100 may be used to estimate the EAS-generating primary particle-energy.

Allev, N.↗

Machine Learning Methods for Estimating Propeller Source Noise Spheres

In this work, several neural network function approximations are compared for inter- polating, storing, and sampling acoustic source spheres with applications to propeller noise estimation. These methods are compared using an acoustic model of the three bladed GL-10 propeller at different flight conditions, with training data generated using NASA’s ANOPP-PAS module. The source spheres used to train the networks capture the tonal propeller noise due to both the blade thickness and loading. This tonal noise prediction method allows the vehicle noise to be estimated for auralization and acoustic control. Three radial basis function neural network architectures are compared in this work. The first two networks directly estimate the parameters of the source sphere at different flight conditions but differ in the number of layers used. The third network estimates the parameters of the source sphere using a weighted combination of spherical basis functions. These networks are trained on numerically generated source spheres, with operating points given in terms of the propeller rotation rate, freestream speed, and propeller angle of attack. The performance of the neural network is determined using a validation dataset of withheld data points. This performance is quantified in terms of the approximation error, training time, and sample time. The third network, which estimates the weights of the spherical basis functions, performs the best in both average and maximum approximation errors in all cases. This network’s worst case performance is 5.6 % relative dif- ference of a model parameter associated with acoustic pressure. The direct estimation network with a single layer has the worst approximation error in all cases. Additionally, the spherically defined network has the slowest sample time at 0.05 seconds per thousand points. Both direct estimation methods produce a thousand sample points in approximately 0.001 seconds.

Acoustics↗

Model and simulation development for turbopump health monitoring by parameter estimation

The nonlinear equations describing the flow, pressure and temperature dynamics of the High Pressure Fuel Turbopump of the Space Shuttle Main Engine are summarized and implemented in a digital simulation. Some closed form approximations to the operating curves of the turbopump are made so that closed form derivatives exist. These equations and approximations are then used to develop an extended Kalman filter that estimates the dynamic states of the turbopump and a parameter that can reflect turbopump degradation. The filter is implemented as a digital computer program and applied to data generated by the digital simulation of the turbopump with substantial noise added to the output signals. The results indicate that the parameter estimate converges quickly and accurately. This suggests that the parameter estimate can be used to monitor for turbopump degradations affecting its value.

Walker, Bruce K.↗

Shuttle /STS-1/ entry trajectory reconstruction

The methods and data used to reconstruct the Shuttle entry trajectory aerodynamics from 180 km to landing are reviewed. Onboard accelerometer and gyro measurements are used with a weighted least squares filter along with ground tracking data to provide the evolving spacecraft state. The software development is described, noting that computations include linear acceleration and angular rate data, aerodynamic coefficient, and inertial measurement units, sampled at 170 Hz. Ground tracking data was gathered on S- and C-bands; Guam data is considered critical as it was taken during the blackout at the beginning of entry. The generation of a best estimate trajectory, combining flight and ground data, yields inplane parameters of altitude, flight path angle, and velocity for comparison with navigational instrumentation. Predicted lift/drag ratios were found to be accurate from Mach 1-25, and up to 23% low below Mach 1.

Compton, H. R.↗

Low Order Equivalent System Identification for the Tu-144LL Supersonic Transport Aircraft

Low order equivalent system models were identified from flight test data for the Tu-144LL supersonic transport aircraft. Flight test maneuvers were executed by Russian and American test Pilots flying the aircraft from Zhukovsky airfield outside Moscow, Russia. Flight tests included longitudinal and lateral / directional maneuvers at supersonic cruise flight conditions. Piloted frequency sweeps and multi-step maneuvers were used to generate data for closed loop low order equivalent system modeling. Model parameters were estimated using a flexible. high accuracy Fourier transform and an equation error / output error (EE/OE) formulation in the frequency domain. Results were compared to parameter estimates obtained using spectral estimation and subsequent least squares fit to frequency response data in Bode plots. Modeling results from the two methods agreed well for both a frequency sweep and multiple concatenated multi-step maneuvers. For a single multi-step maneuvers the EE/OE method gave a better model fit with improved prediction capability. A summary of closed loop low order equivalent system identification results for the Tu-144LL, including estimated parameters, standard errors, and flying qualities level predictions, were computed and tabulated.

Morelli, Eugene A.↗

Using explanatory crop models to develop simple tools for Advanced Life Support system studies

System-level analyses for Advanced Life Support require mathematical models for various processes, such as for biomass production and waste management, which would ideally be integrated into overall system models. Explanatory models (also referred to as mechanistic or process models) would provide the basis for a more robust system model, as these would be based on an understanding of specific processes. However, implementing such models at the system level may not always be practicable because of their complexity. For the area of biomass production, explanatory models were used to generate parameters and multivariable polynomial equations for basic models that are suitable for estimating the direction and magnitude of daily changes in canopy gas-exchange, harvest index, and production scheduling for both nominal and off-nominal growing conditions. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

NASA Discipline Life Support Systems↗

The state of meteoritic material on the moon

Velocity distributions obtained from earth-based meteor observations and corrected to constant meteoroid mass are transformed to meteoroid impact velocity distributions at the moon. Average velocities at the moon thus obtained range from 13 to 18 km/sec. This information is then combined with impact heating estimates to determine the amounts of resident lunar material and incoming meteoritic material that is melted or vaporized. It is found that about 5% of the resulting melt and about 25% of the impact generated vapor should be of meteoritic content. The uncertainties in these estimates are rather large, however, because of uncertainties in the various experimental results required to establish the parameters used in this analysis. The impact generated melts and impact generated vapor deposits, if the latter can be found, should provide additional means for chemically separating out the meteoritic component in the lunar soil.

Zook, H. A.↗

Implementation of an Integrated On-Board Aircraft Engine Diagnostic Architecture

An on-board diagnostic architecture for aircraft turbofan engine performance trending, parameter estimation, and gas-path fault detection and isolation has been developed and evaluated in a simulation environment. The architecture incorporates two independent models: a realtime self-tuning performance model providing parameter estimates and a performance baseline model for diagnostic purposes reflecting long-term engine degradation trends. This architecture was evaluated using flight profiles generated from a nonlinear model with realistic fleet engine health degradation distributions and sensor noise. The architecture was found to produce acceptable estimates of engine health and unmeasured parameters, and the integrated diagnostic algorithms were able to perform correct fault isolation in approximately 70 percent of the tested cases

Armstrong, Jeffrey B.↗

A normative price for energy from an electricity generation system: An Owner-dependent Methodology for Energy Generation (system) Assessment (OMEGA). Volume 1: Summary

The utility owned solar electric system methodology is generalized and updated. The net present value of the system is determined by consideration of all financial benefits and costs (including a specified return on investment). Life cycle costs, life cycle revenues, and residual system values are obtained. Break even values of system parameters are estimated by setting the net present value to zero. While the model was designed for photovoltaic generators with a possible thermal energy byproduct, it applicability is not limited to such systems. The resulting owner-dependent methodology for energy generation system assessment consists of a few equations that can be evaluated without the aid of a high-speed computer.

Chamberlain, R. G.↗

GEODYN system description, volume 1

A computer program for the estimation of orbit and geodetic parameters is presented. The areas in which the program is operational are defined. The specific uses of the program are given as: (1) determination of definitive orbits, (2) tracking instrument calibration, (3) satellite operational predictions, and (4) geodetic parameter estimation. The relationship between the various elements in the solution of the orbit and geodetic parameter estimation problem is analyzed. The solution of the problems corresponds to the orbit generation mode in the first case and to the data reduction mode in the second case.

Chin, M. M.↗

Laser angle sensor development

Electrical and optical parameters were developed for a two axis (pitch/roll) laser angle sensor. The laser source and detector were mounted in the plenum above the model. Two axis optical distortion measurements of flow characteristics in a 0.3 transonic cryogenic tunnel were made with a shearing interferometer. The measurement results provide a basis for estimating the optical parameters of the laser angle sensor. Experimental and analytical information was generated on model windows to cover the reflector. A two axis breadboard was assembled to evaluate different measurement concepts. The measurement results were used to develop a preliminary design of a laser angle sensor. Schematics and expected performance specifications are included.

Pond, C. R.↗

Mars Rover/Sample Return - Phase A cost estimation

This paper presents a preliminary cost estimate for the design and development of the Mars Rover/Sample Return (MRSR) mission. The estimate was generated using a modeling tool specifically built to provide useful cost estimates from design parameters of the type and fidelity usually available during early phases of mission design. The model approach and its application to MRSR are described.

Stancati, Michael L.↗

Low Order Equivalent System for the Tu-144LL Supersonic Transport Aircraft

Low order equivalent system models were identified from flight test data for the Tu- 144LL supersonic transport aircraft. Flight test maneuvers were executed by Russian and American test pilots flying the aircraft from Zhukovsky airfield outside Moscow, Russia. Flight tests included longitudinal and lateral/directional maneuvers at supersonic cruise flight conditions. Piloted frequency sweeps and multi-step maneuvers were used to Generate data for p closed loop low order equivalent system modeling Model parameters were estimated using a flexible, high accuracy Fourier transform and an equation error output error (EE/OE) formulation in the frequency domain. Results were compared to parameter estimates obtained using spectral estimation and subsequent least squares fit to frequency response data in Bode plots. Modeling results from the two methods a-reed well for both a frequency sweep and multiple concatenated multi-step maneuvers. For a single multi-step maneuver, the EE/OE method gave a better model fit with improved prediction capability. A summary of closed loop low order equivalent system identification results for the Tu-144LL. including estimated parameters, standard errors, and flying qualities level predictions, were computed and tabulated.

Morelli, Eugene A.↗