Search NASA⌕ Search

SEARCH · Search NASA

Results for “graphite microstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Effects of graphite porosity and anisotropy on measurements of elastic modulus using laser untrasonics

Laser ultrasonic techniques can be used to study the ultrasonic properties of nuclear graphites and can serve as tools in establishing relationships between materials microstructure and the macroscopic stiffnesses of graphite. Establishing structure-property relationships permits improved ultrasonic sensing of graphite microstructural changes related to service-induced degradation. Laser ultrasonic measurements were made using a pulsed Nd:YAG laser source and detection was performed using a Michelson-type interferometer. This source-receiver combination provides for non-contacting, highly linear transduction of broadbanded, ultrasonic pulses permitting simultaneous determination of longitudinal and shear stiffnesses. Measurements show that among the graphites examined, a change in density of 0.26 g/cm3 (average 1.8 g/cm3) results in a change in the longitudinal elastic stiffness of 9.2 GPa (average 11.3 GPa) and 3.2 GPa (average 4.3 GPa) for the shear stiffness. Larger variations in density were produced by controlled oxidation of IG-110 and NBG-18. Shear wave birefringence measurements using laser line sources in IG-110 and PCEA indicate that IG-110 behaves isotropically while PCEA displays texture characteristic of transversely isotropic materials.

ANISOTROPY↗

Tunable mechanical behavior of graphene nanoribbon-metal composites fabricated through an electrocharge-assisted process

This work investigates the role of a carbon nanophase on the local mechanical behavior of nanocarbon metal matrix composites (NCMCs) produced through an electrocharge-assisted process. Nanoindentation experiments on single crystal Al, Al 1350 parent alloys, and Al 1350 NCMCs revealed variable mechanical properties, caused by an interplay between microstructure and graphitic reinforcements. TEM and AFM studies also reveal nanoscale structural changes based on the incorporation of a carbon nanophase. In order to decouple the effects of the aforementioned mechanical behaviors, molecular dynamics nanoindentation simulations were performed on the (111) surface of Al and Al NCMC samples containing semi-infinite graphene nanoribbons to examine the evolution of plasticity over time. Findings indicate that the arrangement of a finite graphene nanophase within a host matrix can alter plasticity mechanisms and therefore yield strength in near-surface mechanical behavior with little effect on elastic properties. Here, this understanding enables further study into tunable bulk properties of Al-based NCMCs while isolating microstructural effects and reinforcement effects of the carbon phase. Such an understanding will lead to application-specific material geometries ranging from highperforming vehicle structures to next-generation electrical devices.

36 MATERIALS SCIENCE↗

Site specific, high-resolution characterisation of porosity in graphite using FIB-SEM tomography

Graphite is used as a moderator of fast neutrons in some types of nuclear reactors and for other industrial applications. The influence of smaller pores on the mechanical and physical properties of graphite remains to be fully understood. Here in this work, focused ion beam-scanning electron microscopy (FIB-SEM) tomography was applied to characterise the porosity of AGX graphite – an electrode material. FIB-SEM tomography consists in alternating the ion milling and SEM imaging at an area of interest with the objective of creating a 3D reconstruction. Regions containing a filler and a mixture of filler and binder were selected as the areas of interest. Resolutions of a few nanometers were achieved in volumes up to 1400 μm 3 for both regions. Typical porous structures were detected in the filler and binder regions such as thermal cracks, gas evolution porosity and lenticular pores. The resolution achieved with these experiments made possible detection of pores smaller than 150 nm in diameter, that is of the length scale of voids generated by neutron irradiation, and an improvement in spatial resolution of traditional x-ray tomography studies. The resolution achieved by FIB-SEM tomography may be essential for the study of the microstructure of graphite, providing complimentary data to x-ray tomography experiments.

36 MATERIALS SCIENCE↗

Nucleation and growth characteristics of graphite spheroids in bainite during graphitization annealing of a medium carbon steel

The evolution of microstructure in bainite during graphitization annealing at 680 °C of Jominy-quenched bars of an Al-Si bearing medium carbon (0.4C wt%) steel has been studied and compared with that in martensite by using light, scanning and transmission electron microscopy. The results show that the graphitization process in bainite is different from that in martensite in many aspects such as the initial carbon state, the behavior of cementite, the nucleation-growth feature and kinetics of formation of graphite spheroids during graphitization annealing, and the shape, size and distribution of these graphite spheroids. The fact that the graphitization in bainite can produce more homogeneous graphite spheroids with more spherical shape and finer size in a shorter annealing time without the help of preexisting coring particles implies that bainite should be a better starting structure than martensite for making graphitic steel. - Highlights: • This article presents a microstructural characterization of formation of graphite spheroids in bainite. • Nucleation and growth characteristics of graphite spheroids formed in bainite and martensite are compared. • Bainite should be a better starting structure for making graphitic steel as results show.

36 MATERIALS SCIENCE↗

Experimental evidence for ‘buckle, ruck and tuck’ in neutron irradiated graphite

The current mainstream theory for radiation-induced dimensional change of nuclear graphite is based on the notion that interstitially displaced carbon atoms will coalesce into dislocation loops (i.e., additional basal planes). This standard atomic-displacement model has been challenged by theories based on first principles calculations. Furthermore, the so-called ‘ruck and tuck’ of basal planes has been proposed as an alternative mechanism to explain the observed c-axis expansion under irradiation; however, no such defects have been observed experimentally so far. In this study, the first experimental evidence for the presence of a ‘ruck and tuck’ defect in high-temperature neutron-irradiated nuclear graphite is introduced.

36 MATERIALS SCIENCE↗

Stability and phase evolution of mullite in reducing atmosphere

The aim of this study is to investigate the stability of mullite and its phase evolution when heated at 1600-1650 deg. C in reducing atmosphere created by a carbon bed. The stoichiometric mullite (3Al{sub 2}O{sub 3}.2SiO{sub 2}) was synthesized by reacting the proper precursors at 1400 deg. C in air atmosphere. Samples containing the primary mullite and graphite or carbon were prepared by pressing the mix and heated at 1600-1650 deg. C. Products were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the stoichiometric mullite could decompose to corundum and alumina-rich mullite. During firing under reducing atmosphere, the stoichiometric mullite became richer in Al{sup 3+} cations. The gaseous SiO compound was found to be released from the sample and reacting with C to form SiC phase. Comparison of general mullite solid solution (Al{sub 4+2x}Si{sub 2-2x}O{sub 10-x}) with alumina-rich mullite obtained from decomposition revealed that x would take different values depending on temperature and atmosphere. The ultimate decomposition product was found to be corundum. - Research Highlights: {yields} This method is a new route for investigation of thermochemical stability of stoichimetric mullite under reducing condition which have done by the authors. {yields} This research has got very good results for stability of mullite at different conditions. {yields} This work has also studied the mechanism of stability of mullite under reducing atmosphere.

36 MATERIALS SCIENCE↗

EBSD characterization of the growth mechanism of SiC synthesized via direct microwave heating

Well-crystallized 3C-silicon carbide (SiC) grains/nanowires have been synthesized rapidly and conveniently via direct microwave heating, simply using silicon dioxide powders and artificial graphite as raw materials. The comprehensive characterizations have been employed to investigate the micro-structure of the obtained 3C-SiC products. Results indicated that, different from the classic screw dislocation growth mechanism, the 3C-SiC grains/nanowires synthesized via high-energy vacuum microwave irradiation were achieved through the two-dimension nucleation and laminar growth mechanism. Especially, the electron backscattered diffraction (EBSD) was employed to characterize the crystal planes of the as-grown SiC products. The calculated Euler angles suggested that the fastest-growing crystal planes (211) were overlapped gradually. Through the formation of the (421) transformation plane, (211) finally evolved to (220) which existed as the side face of SiC grains. The most stable crystal planes (111) became the regular hexagonal planes in the end, which could be explained by the Bravais rule. The characterization results of EBSD provided important experimental information for the evolution of crystal planes. - Graphical abstract: The formation of 3C-SiC prepared via direct microwave heating follows the mechanism of two-dimension nucleation and laminar growth. - Highlights: • 3C−SiC grains/nanowires were obtained via direct microwave heating. • 3C−SiC followed the mechanism of two-dimension nucleation and laminar growth. • In-situ EBSD analysis provided the experimental evidences of the growth.

36 MATERIALS SCIENCE↗

Microscopic and mesoscopic structural features of an activated carbon sample, prepared from sorghum via activation by phosphoric acid

Graphical abstract: Display Omitted Highlights: ► Preparation of a new activated carbon sample from sorghum. ► Characterization by adsorption/desorption methods. ► Determination of the structure by synchrotron X-ray diffraction. ► The sample is amorphous and contains distorted graphene fragments. ► A characteristic nanoscale distance is established from the radial distribution function. -- Abstract: An acidic chemical activation procedure has been used for preparing activated carbon with a surface area exceeding 1000 m{sup 2}/g from sorghum. In order to reveal structural features, synchrotron X-ray diffraction measurements have been performed. The structure of the material has been characterized by the total scattering structure factor and the radial distribution function describing short-range arrangement of atoms at distances of the order of a few atomic diameters as well as correlations at a longer scale, of the order of nanometers. The atomic arrangement has been found to be consistent with that of amorphous graphite-like carbon. As far as the mesoscopic structure is concerned, the presence of a characteristic distance is suggested on the basis of the clear nanometer scale oscillations of the radial distribution function, which distance may be assigned as the mesopore size in the material. It is suggested that the approach devized here may later be applied routinely for other activated carbon samples, too, for characterizing atomic and nanoscale order simultaneously.

36 MATERIALS SCIENCE↗

Nuclear Graphite

The basis for graphite in nuclear core components. Why graphite, what makes it tick, what is it's behavior, and some speculation on graphite behavior. How does graphite fit into the discussion for different types of reactors and what types of reactors are considering graphite. The importance of graphite for future reactor designs and what work needs to be conducted in characterizing nuclear graphite.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of the graphite electrode material on the characteristics of molten salt electrolytically produced carbon nanomaterials

The electrochemical erosion of a graphite cathode during the electrolysis of molten lithium chloride salt may be used for the preparation of nano-structured carbon materials. It has been found that the structures and morphologies of these carbon nanomaterials are dependent on those of the graphite cathodes employed. A combination of tubular and spherical carbon nanostructures has been produced from a graphite with a microstructure of predominantly planar micro-sized grains and a minor fraction of more irregular nano-sized grains, whilst only spherical carbon nanostructures have been produced from a graphite with a microstructure of primarily nano-sized grains. Based on the experimental results, a best-fit regression equation is proposed that relates the crystalline domain size of the graphite reactants and the carbon products. The carbon nanomaterials prepared possess a fairly uniform mesoporosity with a sharp peak in pore size distribution at around 4 nm. The results are of crucial importance to the production of carbon nanomaterials by way of the molten salt electrolytic method. - Highlights: {yields} Carbon nanomaterials are synthesised by LiCl electrolysis with graphite electrodes. {yields} The degree of crystallinity of graphite reactant and carbon product are related. {yields} A graphite reactant is identified that enables the preparation of carbon nanotubes. {yields} The carbon products possess uniform mesoporosity with narrow pore size distribution.

36 MATERIALS SCIENCE↗

Carbon Ores-Derived Critical Materials for Clean Energy Technology Applications

Presented at the 48th International Technical Conference on Clean Energy (Clearwater Clean Energy Conference), Clearwater, Florida, June 16-19, 2024. This presentation describes the Energy & Environmental Research Center’s development of the Upgraded Carbon Ores-to-Products (UCOP) technology to produce high‑quality graphite and other critical materials from coal and coal wastes for clean energy applications such as batteries and electrodes. It outlines the technical approach, including feedstock cleaning, controlled heat treatment, and graphitization, and presents results demonstrating high graphite purity, novel microstructures, and competitive performance relative to commercial graphite. The work highlights the potential for lower environmental impact and domestic supply chains for critical materials amid increasing global demand and supply‑chain constraints.

01 COAL, LIGNITE, AND PEAT↗

Effects of Microstructural Composition, Porosity, and Microcracks on the Elastic Moduli of Nuclear Graphites

The elastic responses of nuclear graphite not only depend on the graphitic content itself but are largely dictated by the microstructural constitution of the material. The types of raw materials combined with the manufacturing processes used to produce the graphite yield the microstructural content that primarily includes graphite filler, graphitized pitch binder, and voids/defects that typically occupy approximately 20% of the volume. Among these microstructural components, porosity and microcracking (considered to be part of voids/defects) heavily influence the overall properties of the material, including the elastic moduli. It is widely accepted that the primary effect of oxidation is to increase porosity, but the related effect on the moduli cannot be explained satisfactorily by simply noting changes to porosity. Models describing the elastic moduli of porous, polycrystalline graphite materials have been developed to interpret experimental determinations of Young's modulus and shear modulus in oxidized graphites. Beyond porosity, the moduli are heavily influenced by microcracks, and their effects can be assessed using physical property models based on orientation distribution coefficients and microcrack-modified, single-crystal moduli to represent the combined effects of crystallite orientation and microcracking. This work demonstrates how most modulus measurements in nuclear graphites can be understood using relatively simple models that describe the effects of porosity and microcracking. We also present directions to be pursued to account for microstructure-related effects that occur as a result of neutron irradiation.

Spicer, James B.↗

Thermophysical property and pore structure evolution in stressed and non-stressed neutron irradiated IG-110 nuclear graphite

The nuclear graphite, IG-110, was irradiated with and without a compressive load of 5 MPa at ~400 *C up to 9.3E25 n/m2 (E > 0.1 MeV). Following irradiation physical properties were studied to compare the effect of graphite irradiation on microstructure developed under compression and in stress-free conditions. Properties included: dimensional change, thermal conductivity, dynamic modulus, and CTE. The effect of stress on open internal porosity was determined through nitrogen adsorption. The IG-110 graphite experienced irradiation-induced creep that is differentiated from irradiation-induced swelling. Irradiation under stress resulted in somewhat greater thermal conductivity and coefficient of thermal expansion. While a significant increase in dynamic modulus occurs, no differentiation between materials irradiated with and without compressive stress was observed. Nitrogen adsorption analysis suggests a difference in pore evolution in the 0.3e40 nm range for graphite irradiated with and without stress, but this evolution is seen to be a small contributor to the overall dimensional change.

Snead, Lance↗

Theory and application of laser ultrasonic shear wave birefringence measurements to the determination of microstructure orientation in transversely isotropic, polycrystalline graphite materials

Laser ultrasonic line source methods have been used to study elastic anisotropy in nuclear graphites by measuring shear wave birefringence. Depending on the manufacturing processes used during production, nuclear graphites can exhibit various degrees of material anisotropy related to preferred crystallite orientation and to microcracking. In this paper, laser ultrasonic line source measurements of shear wave birefringence on NBG-25 have been performed to assess elastic anisotropy. Laser line sources allow specific polarizations for shear waves to be transmitted – the corresponding wavespeeds can be used to compute bulk, elastic moduli that serve to quantify anisotropy. These modulus values can be interpreted using physical property models based on orientation distribution coefficients and microcrack-modified, single crystal moduli to represent the combined effects of crystallite orientation and microcracking on material anisotropy. Finally, ultrasonic results are compared to and contrasted with measurements of anisotropy based on the coefficient of thermal expansion to show the relationship of results from these techniques.

36 MATERIALS SCIENCE↗