Search NASA⌕ Search

SEARCH · Search NASA

Results for “hadron accelerator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Four-dimensional phase space tomography from one-dimensional measurements of a hadron beam

In this paper, we use one-dimensional measurements to infer the four-dimensional phase space density of an accumulated proton beam in the Spallation Neutron Source (SNS) accelerator. The reconstruction was performed by maximizing the distribution’s entropy subject to the measurement constraints and thus represents the most conservative inference from the data. The reconstructed distribution reproduces the measured profiles down to the noise level, and simulations indicate that the problem is reasonably well constrained. Similar measurements could serve as benchmarks for beam dynamics simulations in the SNS or hadron accelerators.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Creating a High Energy Alert System for the HAWC Gamma Ray Observatory [Slides]

One of the greatest mysteries in astrophysics is exactly how Cosmic Rays (CRs) are accelerated up to extremely high energies within our galaxy. Hadronic models of possible CR accelerators, including supernova remnants and pulsars, require the production of both gamma rays and neutrinos at these sources. Searching for coincidences between neutrino and the highest energy gamma ray observations can help confirm these theories. The High Altitude Water Cherenkov (HAWC) observatory is a ground based gamma ray observatory located at 4100m in Puebla, Mexico. HAWC is able to detect gamma rays with energies greater than 100 TeV, has a wide field of view, and a 95% duty cycle, making it ideal for these types of coincidence searches. This work aims to create a high energy alert system for HAWC, sending out an alert to other experiments for gamma ray events it sees above 56 TeV.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Performance Before and After Irradiation of Pixelated 3D Silicon Sensors for the HL-LHC CMS Tracker

The Large Hadron Collider (LHC) particle accelerator at European Center for Nuclear Research (CERN) will be shut down starting in 2026 to achieve the High Luminosity Large Hadron Collider (HL-LHC) upgrade. The upgrade will allow for higher fluences, in order to increase the probability of detecting increasingly rare particles, and to obtain higher precision measurements of known particles. To accommodate the new accelerator conditions, many aspects of the Compact Muon Solenoid (CMS) detector will be upgraded; of particular interest for this thesis are the silicon pixel detectors located in the inner tracker. These will be replaced and upgraded to accommodate the higher fluences of the HL-LHC upgrade, as well as to replace existing sensors which have sustained radiation damage. In order for the new sensors to operate under high luminosity conditions, they must be increasingly radiation hard, and in order to detect rare particles, they must be increasingly more precise. The performance of one Centro Nacional de Microelectronica (CNM) 3D silicon sensor before and after undergoing irradiation at fluences similar to those which will be observed at the HL-LHC was investigated to determine radiation hardness and precision. Data was collected at Fermi National Laboratory (Fermilab), in the Fermi National Laboratory Test Beam Facility (FTBF) silicon tracker telescope, which can be used to determine the number of particles, and tracks made by high energy protons passing through. The sensor was also irradiated at Fermilab in the Irradiation Test Area (ITA). Prior to data collection a tuning procedure is carried out to determine ideal bias voltage operating conditions, mask noisy and dead pixels, adjust to the ideal threshold, and map sensor gain. Data is then collected at the FTBF, where the sensor is installed in the center of the FTBF silicon telescope. Variables, including angle and bias voltage, are varied throughout data collection. Data is then processed using an alignment software to determine the exact telescope geometry, along with the tracks which were observed passing through the sensor and telescope. Sensor performance was found to be comparable before and after irradiation, with irradiated results showing slightly lower efficiencies and cluster sizes. Position resolution is comparable both before and after irradiation, and similar distributions of cluster shape are observed. After irradiation, the sensor shows increasing collected charge with bias, an indication of increased width of the depletion region. Peak charge pre-irradiation is higher than post-irradiation peak charge, indicating the irradiated results are not taken under fully-depleted conditions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2006

The FLUKA Code: An Overview

FLUKA is a multipurpose Monte Carlo code which can transport a variety of particles over a wide energy range in complex geometries. The code is a joint project of INFN and CERN: part of its development is also supported by the University of Houston and NASA. FLUKA is successfully applied in several fields, including but not only, particle physics, cosmic ray physics, dosimetry, radioprotection, hadron therapy, space radiation, accelerator design and neutronics. The code is the standard tool used at CERN for dosimetry, radioprotection and beam-machine interaction studies. Here we give a glimpse into the code physics models with a particular emphasis to the hadronic and nuclear sector.

Ballarini, F.↗
DOE OSTI2023

Measurement of inclusive 𝐽/𝜓 pair production cross section in 𝑝⁢𝑝 collisions at √𝑠=13 TeV

The production cross section of inclusive J/ψ pairs in pp collisions at a center-of-mass energy $\sqrt{s}$ = 13 TeV is measured with ALICE. The measurement is performed for J/ψ in the rapidity interval 2.5 < y < 4.0 and for transverse momentum p T > 0. The production cross section of inclusive J/ψ pairs is reported to be 10.3 ±2.3(stat.) ±1.3(syst.) nb in this kinematic interval. The contribution from nonprompt J/ψ (i.e., originated from beauty-hadron decays) to the inclusive sample is evaluated. The effective double-parton scattering cross section is computed, neglecting the single-parton scattering contribution.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Conditioned quantum-assisted deep generative surrogate for particle-calorimeter interactions

Particle collisions at accelerators like the Large Hadron Collider (LHC), recorded by experiments such as ATLAS and CMS, enable precise standard model measurements and searches for new phenomena. Simulating these collisions significantly influences experiment design and analysis but incurs immense computational costs, projected at millions of CPU-years annually during the high luminosity LHC (HL-LHC) phase. Currently, simulating a single event with Geant4 consumes around 1000 CPU seconds, with calorimeter simulations especially demanding. To address this, we propose a conditioned quantum-assisted generative model, integrating a conditioned variational autoencoder (VAE) and a conditioned restricted Boltzmann machine (RBM). Our RBM architecture is tailored for D-Wave’s Pegasus-structured advantage quantum annealer for sampling, leveraging the flux bias for conditioning. This approach combines classical RBMs as universal approximators for discrete distributions with quantum annealing’s speed and scalability. We also introduce an adaptive method for efficiently estimating effective inverse temperature, and validate our framework on Dataset 2 of CaloChallenge.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

An extreme thermal cycling reliability test of ATLAS ITk Strips barrel modules

At the end of Run 3 of the Large Hadron Collider (LHC), the accelerator complex will be upgraded to the High-Luminosity LHC (HL-LHC) in order to increase the total amount of data provided to its experiments. To cope with the increased rates of data, radiation, and pileup, the ATLAS detector will undergo a substantial upgrade, including a replacement of the Inner Detector with a future Inner Tracker, called the ITk. The ITk will be composed of pixel and strip sub-detectors, where the strips portion will be composed of 17,888 silicon strip detector modules. During the HL-LHC running period, the ITk will be cooled and warmed a number of times from about -35°C to room temperature as part of the operational cycle, including warm-ups during yearly shutdowns. To ensure ITk Strips modules are functional after these expected temperature changes, and to ensure modules are mechanically robust, each module must undergo ten thermal cycles and pass a set of electrical and mechanical criteria before it is placed on a local support structure. This paper describes the thermal cycling Quality Control (QC) procedure, and results from the barrel pre-production phase (about 5% of the production volume). Additionally, in order to assess the headroom of the nominal QC procedure of 10 cycles and to ensure modules don't begin failing soon after, four representative ITk Strips barrel modules were thermally cycled 100 times — this study is also described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Demonstration of a Novel Phase-Space Painting Method in a Coupled Lattice to Mitigate Space Charge in High-Intensity Hadron Beams

Multiturn charge-exchange injection is the primary method of creating high-intensity hadron beams in circular accelerators, and phase space painting during injection enables tailoring of the accumulated phase space distribution. A technique we call eigenpainting allows injection of particles into a single mode of a coupled ring, providing full four-dimensional control of the phase space distribution. Under ideal conditions, uniform eigenpainting generates a linear-force equilibrium distribution in the transverse plane, with zero volume in four-dimensional transverse phase space, even including space charge. Here, we have implemented eigenpainting for the first time in the spallation neutron source accumulator ring. Injecting 8.8 μ⁢C of an 800 MeV beam, we obtain a final ratio of intrinsic transverse emittances of ≈2.4. We analyze the effect of space charge on the final distribution through comparison of the reconstructed phase space to particle-in-cell simulations.

Evans, Nicholas J. [Oak Ridge National Laboratory ↗
DOE OSTI2023

Measurement of the Λ hyperon lifetime

A new, more precise measurement of the Λ hyperon lifetime is performed using a large data sample of Pb-Pb collisions at $\sqrt{s_{NN}}$=5.02 TeV with ALICE. The Λ and $\bar{Λ}$ hyperons are reconstructed at midrapidity using their two-body weak decay channel Λ→p+π - and $\bar{Λ}$→$\bar{p}$+π + . The measured value of the Λ lifetime is τ Λ =[261.07±0.37(stat.)±0.72(syst.)] ps. The relative difference between the lifetime of Λ and $\bar{Λ}$, which represents an important test of CPT invariance in the strangeness sector, is also measured. The obtained value (τ Λ -τ $\bar{Λ}$ )/τ Λ =0.0013±0.0028(stat.)±0.0021(syst.) is consistent with zero within the uncertainties. Both measurements of the Λ hyperon lifetime and of the relative difference between τ Λ and τ $\bar{Λ}$ are in agreement with the corresponding world averages of the Particle Data Group and about a factor of three more precise.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Analysis of the Mechanical Performance of the 4.2-m-Long MQXFA Magnets for the Hi-Lumi LHC Upgrade

Under the U.S. High Luminosity LHC Accelerator Upgrade Project (HL-LHC AUP), the 150 mm bore, high-field Nb 3 Sn low-{eta}_MQXFA quadrupole magnets are being fabricated, assembled and tested, in the context of the CERN Hi-Luminosity LHC (HL-LHC) upgrade. These magnets have 4.2 m magnetic length and 4.56 m long iron yoke. To date, eight MQXFA magnets have been tested. One of the magnets additionally underwent a successful endurance test with 40 triggered quenches, and two magnets did not perform as expected. This work summarizes for the first time the available strain gauge data from eight identical Nb 3 Sn MQXFA tested magnets, focusing on the endurance test, and on a possible cause of underperformance of the two magnets that did not pass the vertical test. Here we applied methods to prevent this from happening in future MQXFA magnets, which shown to be effective for last two tested magnets.

43 PARTICLE ACCELERATORS↗
NASA NTRS1985

Theoretical study of EAS hadronic structure

The structure of extensive air showers (EAS) is determined mainly by the energetic hadrons. They are strongly collimated in the core of the shower and essential difficulties are encountered for resolution of individual hadrons. The properties for resolution are different from the variety of hadron detectors used in EAS experiments. This is the main difficulty in obtaining a general agreement between actually registered data with different detectors. The most plausible source for disagreement is the uncertainty in determination of the energy of individual hadrons. This research demonstrates that a better agreement can be obtained with the average tendency of hadronic measurements if one assumes a larger coefficient of inelasticity and stronger energy increase of the total inelastic cross section in high energy pion interactions. EAS data above 10 to the 5th power GeV are revealing a faster development of hadronic cascades in the air then can be expected by extrapolating the parameters of hadron interactions obtained in accelerator measurements.

Popova, L.↗
NASA NTRS1999

High Energy Observations of X-Ray Binaries and Gamma-Ray Blazars

The report discusses the CGRO observation of X-ray binary systems and studies of gamma-ray blasars. Numerous authors have suggested mechanisms for particle acceleration within X-Ray Binary (XRB) systems. Among the acceleration mechanisms that have been applied are pulsar acceleration, shock acceleration at an accretion shock front, shock acceleration at a pulsar wind termination shock, plasma turbulence excited by the accretion flow, and a number of electrodynamic mechanisms. There are therefore many mechanisms which are capable of generating very energetic particles in the XRB environment. If the reports of TeV/PeV gamma-ray generation in XRBs are correct, then one can show that the accelerated particles must be hadrons and that the most likely gamma-ray production mechanism is the decay of collisionally-produced (or photoproduced) neutral pions. At these ultra-high energies, the emission is so strongly beamed that the target conditions are constrained by the requirement that the column depth be large enough to efficiently generate gamma-rays, but not so large that the gamma-rays are absorbed. These constraints naturally lead to models that explain the periodic, narrow duty-cycle pulses observed at TeV/PeV energies as arising from interactions with, either, the atmosphere of the binary companion, an accretion column, or an accretion disk. The production of these TeV/PeV gamma-rays by the decay of pions from "leading isobars" must also be accompanied by a more isotropic emission component in the EGRET energy band from the decay of slower pions (i.e. the "pionization" component). Since the attenuation of 35 MeV-1 GeV photons by photon-photon pair production is not likely to be significant in most XRBs, the TeV/PeV reports therefore strongly suggest sporadic emission in the EGRET energy band. One of the key unresolved issues for understanding AGN is the relationship between XBLs and RBLs.To test the "reunification" hypothesis, authors conducted a multiwavelength campaign during Cycle 7 of the CGRO observing program. The analysis of the cycle 4 through cycle 6 CGRO measurements was completed. Two previously unknown EGRET sources was discovered.

Vestrand, W. Thomas↗
NASA NTRS2015

Fiat Lux, Let There Be Light!

Most of us think of light as helping us see things, but it is so much more important than that. Light is electromagnetic energy moving in waves through space, interacting with atoms and molecules as it goes. So are radio waves, microwaves, infrared light, ultraviolet, x-rays and gamma rays - all of them are electromagnetic energy, and the only real difference is the spacing between the wave crests. So light gives us communications with each other with radio and TV, and it gives us the ability to travel through the universe using telescopes and our imagination. But light also gives us access to scientific questions, such as: what holds the atoms and molecules together? How does the mysterious quantum mechanics work? And understanding all these, how can we build electronic devices for modern life? And if we are very ambitious, we build accelerators like the Large Hadron Collider, and particles collide and concentrate electromagnetic energy into tiny spaces, and according to Einstein's E equals mc squared, we turn energy into new particles to learn, perhaps what the universe was like when it was a tiny fraction of a second old.

telescopes↗
DOE OSTI2023

Creating a high energy alert system for the HAWC gamma ray observatory

One of the greatest mysteries in astrophysics is exactly how Cosmic Rays (CRs) are accelerated up to extremely high energies within our galaxy. The highest-energy galactic CRs are associated with gamma rays at ~100 TeV. Hadronic models of possible CR accelerators, including supernova remnants and pulsars, require the production of both gamma rays and neutrinos at these sources. Searching for coincidences between neutrino and the highest energy gamma ray observations can help confirm these theories. The High Altitude Water Cherenkov (HAWC) observatory is a ground based gamma ray observatory located in Puebla, Mexico. HAWC is able to detect gamma rays with energies greater than 100 TeV. It has a wide field of view and a 95% duty cycle, making it ideal for these types of coincidence searches. This work aims to create a high energy alert system for HAWC, sending out an alert to other experiments for high-energy gamma ray events it sees.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Updates to the NuMI Flux Simulation at MicroBooNE (V.1.0)

The NuMI flux prediction being used by all experiments at Fermilab that are sensitive to the NuMI beam is based on Geant v4.9.2.03 (G4.9) and uses the default FTFP-BERT physics list with no custom cross sections. In order to correct these predictions to match world data, PPFX, the Package to Predict the FluX, is used to reweight the flux prediction. In kinematic regions of overlap between the prediction and data, mainly NA49 measurements are used to correct for various hadron production processes. Specifcally, PPFX looks at the entire ancestry chain of the neutrino, up to the incident 120 GeV proton beam, and applies corrections for various hadron interactions based on said data. These corrections are implemented as a function of the Feynman-x (x F ) and transverse momentum (p T ) of the incident hadron.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

An experimental program with high duty-cycle polarized and unpolarized positron beams at Jefferson Lab

Positron beams, both polarized and unpolarized, are identified as important ingredients for the experimental programs at the next generation of lepton accelerators. In the context of the hadronic physics program at Jefferson Lab (JLab), positron beams are complementary, even essential, tools for a precise understanding of the electromagnetic structure of nucleons and nuclei, in both the elastic and deep-inelastic regimes. For instance, elastic scattering of polarized and unpolarized electrons and positrons from the nucleon enables a model independent determination of its electromagnetic form factors. Also, the deeply-virtual scattering of polarized and unpolarized electrons and positrons allows unambiguous separation of the different contributions to the cross section of the lepto-production of photons and of lepton-pairs, enabling an accurate determination of the nucleons and nuclei generalized parton distributions, and providing an access to the gravitational form factors of the energy-momentum tensor. Furthermore, positron beams offer the possibility of alternative tests of the Standard Model of particle physics through the search of a dark photon, the precise measurement of electroweak couplings, and the investigation of charged lepton flavor violation. This document discusses the perspectives of an experimental program with high duty-cycle positron beams at JLab.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Hadron Monitor Calibration System for NuMI

NuMI (Neutrinos at Main Injector) beamline at Fermi National Accelerator Laboratory provides neutrinos to various neutrino experiments. The hadron monitor consisting of a 5 by 5 array of ionization chambers is part of the diagnostics for the beamline. In order to calibrate the hadron monitor, a gamma source is needed. We present the status and progress of the development of the calibration system for the hadron monitor. The system based on Raspberry Pi controlled CNC system, motors, and position sensors would allow us to place the gamma source precisely to calibrate the signal gain of individual pixels. The ultimate outcome of the study is a prototype of the calibration system.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Celeritas R&D Report: Accelerating Geant4

Celeritas is a new Monte Carlo (MC) detector simulation code designed for computationally intensive applications on high-performance heterogeneous architectures. In the past two years Celeritas has advanced from prototyping a Graphics Processing Unit (GPU)-based single physics model in infinite medium to implementing a full set of electromagnetic (EM) physics processes in complex geometries. The current release of Celeritas, version 0.4, has incorporated full device-based navigation, an event loop in the presence of magnetic fields, and detector hit scoring. New functionality incorporates a scheduler to offload electromagnetic physics to the GPU within a Geant4-driven simulation, enabling straightforward integration of Celeritas into the high energy physics (HEP) experimental frameworks CMSSW and ATLAS FullSimLight. On the Perlmutter supercomputer, Celeritas performs EM physics between 3× and 18× faster using the machine’s Nvidia GPUs compared to using only CPUs, corresponding to an electrical power efficiency up to a factor of 5. When running a multithreaded Geant4 ATLAS test beam application with full hadronic physics, using Celeritas to accelerate the EM physics results in an overall simulation speedup of 1.7–2.2× on GPU and 1.2× on CPU. In a CMS test application using tt¯ events and the prototype Run 4 configuration, compared to Geant4 CPU, Celeritas with a Nvidia A100 improves overall throughput up to a factor of 2.7× but cannot be efficiently shared with more than 8 cores.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗