Search NASA⌕ Search

SEARCH · Search NASA

Results for “heat rectification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

64 records · Page 4

Near-field photonic thermal diode based on hBN and InSb films

A thermal diode is a two-terminal device that allows heat to transfer more easily in one direction (forward bias) than in the opposite direction (reverse bias). A photonic thermal diode operates in a contactless mode and may afford a large operating temperature range. Here, a near-field photonic thermal diode based on hexagonal boron nitride (hBN) and indium antimonide (InSb) films is theoretically demonstrated. In this work, the temperature dependence of the interband absorption of InSb is used to couple (or decouple) with the hyperbolic phonon polaritons in hBN. The numerical analysis predicts a rectification ratio greater than 17 for a 10 nm vacuum gap, when operating at an average temperature of 300 K and a temperature difference of 200 K. The calculated rectification ratio exceeds 35 at higher average temperatures with larger temperature differences.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Estimates of RF-induced erosion at antenna-connected beryllium plasma-facing components in JET

Radio-frequency (RF)-enhanced surface erosion of beryllium (Be) plasma-facing components is explored, for the first time, using the ERO code. We applied the code in order to measure the RF-enhanced edge Be line emission at JET Be outboard limiters, in the presence of high-power, ion cyclotronresonance heating (ICRH) in L-mode discharges. In this first modelling study, the RF sheath effect from an ICRH antenna on a magnetically connected, limiter region is simulated by adding a constant potential to the local sheath, in an attempt to match measured increases in local Be I and Be II emission of factors of 2 3. It was found that such increases are readily simulated with added potentials in the range of 100 200 V, which is compatible with expected values for potentials arising from rectification of sheath voltage oscillations from ICRH antennas in the scrape-off layer plasma. We also estimated absolute erosion values within the uncertainties in local plasma conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ICRF-enhanced plasma potentials in the SOL of Alcator C-Mod

We performed an extensive survey of the plasma potential in the scrape-off layer (SOL) of Ion Cyclotron Range-of Frequencies (ICRF)-heated discharges on Alcator C-Mod. Our results show that plasma potentials are enhanced in the presence of ICRF power and plasma potential values of >100 V are often observed. Such potentials are high enough to induce sputtering of high-Z molybdenum (Mo) plasma facing components by deuterium ions on C-Mod. For comparison, the plasma potential in Ohmic discharges is typically less than 10 V, well below the threshold needed to induce Mo sputtering by deuterium ions. ICRF-enhanced plasma potentials are observed in the SOL regions that both magnetically map and do not map to active ICRF antennas. Regions that magnetically map to active ICRF antennas are accessible to slow waves directly launched by the antennas and these regions experience plasma potential enhancement that is partially consistent with the slow wave rectification mechanism. One of the most defining features of the slow wave rectification is a threshold appearance of significant plasma potentials (>100 V) when the dimensionless rectification parameter Λ{sub −o} is above unity and this trend is observed experimentally. We also observe ICRF-enhanced plasma potentials >100 V in regions that do not magnetically map to the active antennas and, hence, are not accessible for slow waves launched directly by the active antennas. However, unabsorbed fast waves can reach these regions. The general trend that we observe in these 'un-mapped' regions is that the plasma potential scales with the strength of the local RF wave fields with the fast wave polarization and the highest plasma potentials are observed in discharges with the highest levels of unabsorbed ICRF power. Similarly, we find that core Mo levels scale with the level of unabsorbed ICRF power suggesting a link between plasma potentials in the SOL and the strength of the impurity source.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silicon Carbide High-Temperature Power Rectifiers Fabricated and Characterized

The High Temperature Integrated Electronics and Sensors (HTIES) team at the NASA Lewis Research Center is developing silicon carbide (SiC) for use in harsh conditions where silicon, the semiconductor used in nearly all of today's electronics, cannot function. Silicon carbide's demonstrated ability to function under extreme high-temperature, high power, and/or high-radiation conditions will enable significant improvements to a far ranging variety of applications and systems. These improvements range from improved high-voltage switching for energy savings in public electric power distribution and electric vehicles, to more powerful microwave electronics for radar and cellular communications, to sensors and controls for cleaner-burning, more fuel-efficient jet aircraft and automobile engines. In the case of jet engines, uncooled operation of 300 to 600 C SiC power actuator electronics mounted in key high-temperature areas would greatly enhance system performance and reliability. Because silicon cannot function at these elevated temperatures, the semiconductor device circuit components must be made of SiC. Lewis' HTIES group recently fabricated and characterized high-temperature SiC rectifier diodes whose record-breaking characteristics represent significant progress toward the realization of advanced high-temperature actuator control circuits. The first figure illustrates the 600 C probe-testing of a Lewis SiC pn-junction rectifier diode sitting on top of a glowing red-hot heating element. The second figure shows the current-versus voltage rectifying characteristics recorded at 600 C. At this high temperature, the diodes were able to "turn-on" to conduct 4 A of current when forward biased, and yet block the flow of current ($quot;turn-off") when reverse biases as high as 150 V were applied. This device represents a new record for semiconductor device operation, in that no previous semiconductor electronic device has ever simultaneously demonstrated 600 C functionality, and 4-A turn-on and 150-V rectification. The high operating current was achieved despite severe device size limitations imposed by present-day SiC wafer defect densities. Further substantial increases in device performance can be expected when SiC wafer defect densities decrease as SiC wafer production technology matures.

Source record↗

Electron Spin Polarization and Rectification Driven by Chiral Perylene Diimide-Based Nanodonuts

The chirality-induced spin selectivity (CISS) effect allows thin-film layers of chiral conjugated molecules to function as spin filters at ambient temperature. Through solvent-modulated dropcasting of chiral l- and d-perylene diimide (PDI) monomeric building blocks, two types of aggregate morphologies, nanofibers and nanodonuts, may be realized. Spin-diode behavior is evidenced in the nanodonut structures. Stacked PDI units, which form the conjugated core of these nanostructures, dominate the nanodonut–Au electrode contact; in contrast, the AFM tip contacts largely the high-resistance solubilizing alkyl chains of the chiral monomers that form these nanodonuts. Current–voltage responses of the nanodonuts, measured by magnetic conductive AFM (mC-AFM), demonstrate substantial spin polarizations as well as spin current rectification ratios (>10) that exceed the magnitudes of those determined to date for other chiral nanoscale systems. Furthermore, these results underscore the potential for chiral nanostructures, featuring asymmetric molecular junctions, to enable CISS-based nanoscale spin current rectifiers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Power Generation from a Radiative Thermal Source Using a Large-Area Infrared Rectenna

Electrical power generation from a moderate-temperature thermal source by means of direct conversion of infrared radiation is important and highly desirable for energy harvesting from waste heat and micropower applications. Here, we demonstrate direct rectified power generation from an unbiased large-area nanoantenna-coupled tunnel diode rectifier called a rectenna. Using a vacuum radiometric measurement technique with irradiation from a temperature-stabilized thermal source, a generated power density of 8 nW / cm 2 is observed at a source temperature of 450°C for the unbiased rectenna across an optimized load resistance. The optimized load resistance for the peak power generation for each temperature coincides with the tunnel diode resistance at zero bias and corresponds to the impedance matching condition for a rectifying antenna. Current-voltage measurements of a thermally illuminated large-area rectenna show current zero crossing shifts into the second quadrant indicating rectification. Photon-assisted tunneling in the unbiased rectenna is modeled as the mechanism for the large short-circuit photocurrents observed where the photon energy serves as an effective bias across the tunnel junction. Furthermore, the measured current and voltage across the load resistor as a function of the thermal source temperature represents direct current electrical power generation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Introduction of Interfacial Charges to Black Phosphorus for a Family of Planar Devices

The capabilities to tune the conduction properties of materials by doping or electric fields are essential for the design of electronic devices. However, in two-dimensional materials substitutional doping has been achieved in only a few systems, such as Nb substitutional doping in MoS 2 . Surface charge transfer is still one of the popular ways to control whether the conduction is dominated by holes or electrons. Here, we demonstrate that a capping layer of cross-linked poly(methyl methacrylate) modifies the potential in a black phosphorus (BP) layer so that conduction in the absence of an external electric field is dominated by electrons, rather than holes. Using this technique to form adjoining regions dominated by hole and electron conduction, a family of novel planar devices, such as BP-gated diodes, BP bidirectional rectifier, and BP logic inverters, can be fabricated. The devices are potentially useful for electronic applications, including rectification and switching.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Radial Broadening of DC potential structures in front of ICRF antennas by transverse exchange of RF currents

Measurements show that the vicinity of powered Ion Cyclotron Range of Frequency (ICRF) antennae is biased positively with respect to its environment. This is attributed to RF-sheaths. The radial penetration of DC potentials into Tokamak SOL determines the power deposition on the walls and especially on the antenna structure, which is a key point for long time clean discharges. Within independent flux tube models of RF-sheath rectification the radial penetration of DC potentials is determined by the skin depth x{sub 0} = c/{omega}{sub pe} for the slow wave. When self-consistent exchanges of transverse RF currents are allowed between neighboring flux tubes, such a structure can be broadened radially up to a characteristic transverse length L. Broadening arises as soon as L>r{sub 0}. A linear modeling gives a first evaluation of the theoretical length L{approx_equal}(L{sub parallel} {rho}{sub ci}/){sup 1/2}. Within the 'flute assumption' it scales with the length L{sub parallel} of open flux tubes and the ion Larmor radius {rho}{sub ci}. This has been confirmed by the SEM code which takes into account non-linear rectifications. Applying our model to several potential maps generated by an ITER antenna, it comes out that L ranges between 1 and 10 cm depending on local L{sub parallel} and on typical ITER plasma parameters. Langmuir probe measurements on Tore Supra suggest that the broadening is lower than predicted by the code, which supposes that currents do not occur all over the parallel magnetic lines but on a fraction of it.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterizing W sources in the all-W wall, all-RF WEST tokamak environment

In this work, experimental data, together with interpretive modeling tools, are examined to study trends in the tungsten (W) source in the all-W environment of the WEST tokamak, both from the divertor and from the main chamber. In particular, a poloidal limiter protecting an ion cyclotron resonance heating (ICRH) antenna is used as proxy for main chamber sourcing. The key study is carried out by stepping up lower hybrid current drive (LHCD) power, as the only auxiliary power source. Limiter and divertor W sources exhibit a qualitatively similar proportionality to the total power crossing the separatrix, P SEP , although the main chamber source remains substantially lower than the divertor source, for the range of P SEP accessible in the experiments. Intepretive modeling of the limiter source is carried out with a particle-in-cell (PIC) sheath model coupled to a surface sputtering model. Oxygen is used as a proxy for all light impurity species allowing for characterization of the critical W erosion regions. To get a good quantitative match to the data, it is necessary to assume that the oxygen arrives at the surface mostly at high ionization stages (4+ and above). A separate simulation with SOLEDGE-EIRENE, constrained to measured upstream scrape-off-layer plasma profiles, gives oxygen fractional abundances that are compatible with the PIC simulation result. This is understood to arise from transport processes that dominate over recombination. Substituting the LHCD by ICRH, in an equivalent experiment, the local W source exhibits a 3× enhancement. This can be matched by the simulation, by assuming local RF electric field rectification, based on ~100 eV peak-to-peak, near-antennna electric field. This work has highlighted the particular importance of understanding the ion charge state balance of light impurities as these are most likely the dominant sputtering species in fusion devices with high-Z walls.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulations of ICRF Heating for SPARC during First Campaign and Primary Reference-Like Discharge using the Stix Code

High magnetic field tokamaks, like SPARC, rely on ion cyclotron radio frequency heating (ICRF) to reach fusion relevant temperatures. The SPARC tokamak will have 14 ICRF antennas in 7 toroidal locations delivering > 20 MW of power to the plasma. New capabilities with the full wave cold plasma solver, Stix, now allow for resolving the wave-particle resonances using lower order thermal corrections to capture core absorption of Landau damping and ion resonances in devices like SPARC. Favorable comparisons to the TORIC codes give confidence in the single pass absorption of this model to accurately capture the strength of edge interactions of the RF. Using this new dielectric formulation in the Stix code, simulations of the 2D poloidal cross section of SPARC are completed for the first campaign and primary reference-like discharges (PRD-like). A scan of the minority ion concentrations of helium-3 is performed and shows the expected behavior that as the helium-3 decreases the amount of single pass absorption also decreases which is seen in both scenarios. Additionally, both scenarios show only slight differences in single-pass absorption for the range of 3% to 5% helium-3 allowing for more flexibility in experiments. This study also highlights the differences between the first campaign and PRD-like with the first campaign discharges showing much more multi-pass absorption and an effect of confining the wave to a smaller portion of the cross-section due to the fast wave cut-off. This latter result suggests that far-field sheath rectification at the high-field side would be minimal for the first campaign scenario.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗