Search NASA⌕ Search

SEARCH · Search NASA

Results for “helium ion microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

68 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Synthesis of magnesiowüstite nanocrystallites embedded in an amorphous silicate matrix via low energy multiple ion implantations

The synthesis process is presented for experimentally simulating modifications in cosmic dust grains using sequential ion implantations or irradiations followed by thermal annealing. Cosmic silicate dust analogues were prepared via implantation of 20–80 keV Fe - , Mg - , and O - ions into commercially available p-type silicon (100)wafers. The as-implanted analogues are amorphous with a Mg/(Fe+Mg) ratio of 0.5 tailored to match theoretical abundances in circumstellar dusts. Before the ion implantations were performed, Monte-Carlo-based ion-solid interaction codes were used to model the dynamic redistribution of the implanted atoms in the silicon substrate. 600 keV helium ion irradiation was performed on one of the samples before thermal annealing. Two samples were thermally annealed at a temperature appropriate for an M-class stellar wind, 1000 K, for 8.3 h in a vacuum chamber with a pressure of 1 x 10 -7 torr. The elemental depth profiles were extracted utilizing Rutherford Backscattering Spectrometry (RBS) in the samples before and after thermal annealing. X-ray diffraction (XRD)analysis was employed for the identification of various phases in crystalline minerals in the annealed analogues. Transmission electron microscopy (TEM) analysis was utilized to identify specific crystal structures. RBS analysis shows redistribution of the implanted Fe, Mg, and O after thermal annealing due to incorporation into the crystal structures for each sample type. XRD patterns along with TEM analysis showed nanocrystalline Mg and Fe oxides with possible incorporation of additional silicate minerals.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Unraveling the Early-Stage Ordering of Krypton Solid Bubbles in Molybdenum: A Multimodal Study

Self-organization of defects such as fission gas bubbles in materials can lead to high inventory capacity for fission gas storage and help mitigate swelling caused by fission gases in nuclear fuel materials under radiation in nuclear reactors. Here, we report the physical mechanism of self-organization of krypton (Kr) gas bubbles in molybdenum (Mo) under ion implantation. The ion fluence and temperature-dependent formation of Kr solid bubble superlattice (SBS) in Mo were investigated by using both synchrotron-based small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). Early stage self-organization of gas bubbles is observed at a fluence of 2.5 × 10 16 ions/cm 2 at temperatures of 300–400 °C. The bubble lattice constant increases with increasing implantation temperature from 300 to 400 °C. Both experiments and atomic kinetic Monte Carlo modeling indicate that the Kr solid bubbles are weakly ordered in comparison to previously studied helium (He) gas bubble superlattice (GBS) while the lattice constant are relatively smaller for Kr SBS compared to that of He GBS. The irradiation conditions suggest that spinodal decomposition, which is a form of phase separation, probably precedes gas bubble ordering in Mo. Altogether, our work sheds light on the formation mechanism of noble gas superlattice toward the development of radiation-tolerant materials which are important for the design of advanced nuclear reactors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Printed graphene oxide-based membranes for gas separation and carbon capture

Graphene oxide (GO)-based separation membranes have demonstrated the great potential to separate molecules and ions by the interlayer spacing with tunable nano-sized channels. The scalable fabrication of GO-based gas separation membranes, however, remains challenging, although a few preparation approaches have been reported. Here in this work, we present for the first time that the co-solvent ink-jet printing, as a fast and scalable method, can be utilized for scalable GO-based gas separation membrane preparation. Large-area (>100 cm 2 ), ultrathin, and high-quality GO membrane was successfully deposited on commercial polysulfone (PS) support, and characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction, et al., Selective hydrogen (H 2 ) and helium (He) transport over carbon dioxide (CO 2 ) and nitrogen (N 2 ) was demonstrated for the printed GO membrane. To further explore the separation potential of the printed GO-based gas membrane, additives for facilitated molecular transport were incorporated during the membrane printing process. By inserting CO 2 -philic agents into the printed GO membrane, highly efficient separation of CO 2 from N 2 was achieved with CO 2 /N 2 selectivity of 70 and CO 2 permeance as high as 2,500 GPU. The strategy proposed here may provide guidance for large-scale GO-based gas separation membrane production and a versatile approach for applying other functional 2-dimensional materials towards the membrane separation application.

42 ENGINEERING↗
DOE OSTI2024

Study of Helium Irradiation Effect on Al6061 Alloy Fabricated by Additive Friction Stir Deposition

Additive friction stir deposition (AFS-D) is considered a productive method of additive manufacturing (AM) due to its ability to produce dense mechanical parts at a faster deposition rate compared to other AM methods. Al6061 alloy finds extensive application in aerospace and nuclear engineering; nevertheless, exposure to radiation or high-energy particles over time tends to deteriorate their mechanical performance. However, the effect of radiation on the components manufactured using the AFS-D method is still unexamined. In this work, samples from the as-fabricated Al6061 alloy, by AFS-D, and the Al6061 feedstock rod were irradiated with He+ ions to 10 dpa at ambient temperature. The microstructural and mechanical changes induced by irradiation of He+ were examined using a scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and nanoindentation. This study demonstrates that, at 10 dpa of irradiation damage, the feedstock Al6061 produced a bigger size of He bubbles than the AFS-D Al6061. Nanoindentation analysis revealed that both the feedstock Al6061 and AFS-D Al6061 samples have experienced radiation-induced hardening. These studies provide a valuable understanding of the microstructural and mechanical performance of AFS-D materials in radiation environments, offering essential data for the selection of materials and processing methods for potential application in aerospace and nuclear engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Crystallographic analysis of nano-tendril bundle vs fuzz growth on tungsten exposed to helicon wave-coupled helium plasma

The propensity for nano-tendril bundle (NTB) vs widespread nano-tendril growth (i.e., fuzz) on polycrystalline W under varying ion energy modulation conditions, from DC to peak-to-peak energy modulation of 42 eV at 13.56 MHz, is correlated with the crystal orientation of the underlying grains. Grains that are vicinal to crystal orientations with high surface diffusivity (e.g., {101} for a body centered cubic crystal structure) exhibit NTB growth at lower ion energy modulation amplitude than grains that are vicinal to low surface diffusivity orientations, such as {100}. Adatom mobility considerations are presented to describe the experimental observations. These results support that surface diffusion or W adatom mobility enhanced by ion bombardment plays a key role in the surface morphology evolution of W under He irradiation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Emulation of neutron-irradiated microstructure of austenitic 21Cr32Ni model alloy using dual-ion irradiation

Here, in this study, the capability of heavy-ion irradiation to emulate neutron irradiation was demonstrated on an austenitic 21Cr32Ni type ternary model alloy. The model alloy used in this study is chemically analogous but compositionally simpler than of alloy 800H, which is a candidate austenitic Ni alloy which has been proposed for use in Generation IV reactors. The microstructure of the 21Cr32Ni model alloy irradiated in the BOR-60 fast reactor to 17.1 dpa and 35 dpa at ~380°C was characterized using transmission electron microscopy (TEM). The 17.1 dpa BOR-60 irradiated microstructure was then compared with the microstructure of the same material developed under dual-ion (DI) irradiation using various He/dpa ratios between 0.1 and 16.6 appm He/dpa in the temperature range of 430°C-500°C. The results showed that both neutron and DI irradiation of 21Cr32Ni model alloy produced dislocations in the form of a dislocation network as well as {111}-type faulted dislocation loops, cavities, and radiation-induced Ni enrichment at radiation-induced sinks. When the dose and the He/dpa ratio were kept similar to those in neutron irradiation, DI irradiation of the 21Cr32Ni model alloy at 460°C resulted in over-nucleation of small cavities and in a high density of faulted dislocation loops compared to those observed in the fast-neutron irradiated alloy of the same heat irradiated at ~380°C. The optimal condition for reproducing the neutron-irradiated microstructure was DI irradiation at 460°C and 0.1 appm He/dpa. In that case, the faulted loop and cavity size distributions in the BOR-60 irradiated 21Cr32Ni model alloy samples closely matched with those measured in the DI irradiated 21Cr32Ni model alloy sample. The fact that the He/dpa is an order of magnitude smaller than the helium generation rate for fast neutron irradiation, stops over nucleation and allows for the development of a similar microstructure as for neutron irradiation.

21Cr32Ni model alloy↗
DOE OSTI2025

Bulk synthesis of radiation resistant W – Ti – Cr – V compositionally complex alloys

Refractory compositionally complex alloys are candidate material systems for next generation advanced nuclear reactors. This work showcases the first successful bulk synthesis of low activation W–Ti based refractory compositionally complex alloys using arc melting and provides insights on using additive manufacturing for these compositions using directed energy deposition. Both techniques produce equiaxed grains composed of a tungsten matrix with Ti–V–Cr dendritic boundaries. The arc melted specimen possesses a multi-modal grain size distribution, while the directed energy deposition specimen possesses a more gaussian distribution of grain size. Both arc melted and directed energy deposition specimens demonstrate high thermal stability up to 900 °C, as well as promising radiation resistance with low loop formation and the presence of homogeneously distributed helium cavities maintaining small diameters at ≥10 dpa under simultaneous light (helium) and heavy (krypton) ion irradiation at 900 °C.

Arc melting (AM)↗
DOE OSTI2022

Implications of Microstructure in Helium-Implanted Nanocrystalline Metals

Helium bubbles are known to form in nuclear reactor structural components when displacement damage occurs in conjunction with helium exposure and/or transmutation. If left unchecked, bubble production can cause swelling, blistering, and embrittlement, all of which substantially degrade materials and—moreover—diminish mechanical properties. On the mission to produce more robust materials, nanocrystalline (NC) metals show great potential and are postulated to exhibit superior radiation resistance due to their high defect and particle sink densities; however, much is still unknown about the mechanisms of defect evolution in these systems under extreme conditions. Here, the performances of NC nickel (Ni) and iron (Fe) are investigated under helium bombardment via transmission electron microscopy (TEM). Bubble density statistics are measured as a function of grain size in specimens implanted under similar conditions. While the overall trends revealed an increase in bubble density up to saturation in both samples, bubble density in Fe was over 300% greater than in Ni. To interrogate the kinetics of helium diffusion and trapping, a rate theory model is developed that substantiates that helium is more readily captured within grains in helium-vacancy complexes in NC Fe, whereas helium is more prone to traversing the grain matrices and migrating to GBs in NC Ni. Our results suggest that (1) grain boundaries can affect bubble swelling in grain matrices significantly and can have a dominant effect over crystal structure, and (2) an NC-Ni-based material can yield superior resistance to irradiation-induced bubble growth compared to an NC-Fe-based material and exhibits high potential for use in extreme environments where swelling due to He bubble formation is of significant concern.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of thermal oxidation on helium implanted 316L stainless steel

The effect of thermal oxide layer on He implanted 316L stainless steel was studied to evaluate experimentally how thermal oxidation affects the diffusion and distribution of He in the material. In the case of thermal oxidation of a He implanted sample, with an increase in oxidation time, the max swelling height increases logarithmically as a function of time and finally saturates for all samples except for the lowest dose of implanted He. Concerning TEM results, two void regions are identified. Similar to the calculation, the total irradiated depth was around 250 nm and the large void region was formed around 100–150 nm depth. On the other hand, the small void region was observed immediately under oxide layer from the thermal oxidation. In contrast, there were no voids in the altered zone near the metal/oxide interface in the non-thermal oxidized/He implanted sample. This description of the phenomena was justified using the Kirkendall effect and the Point Defect Model.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Selective modulation of electronic transport in VO 2 induced by 10 keV helium ion irradiation

Vanadium dioxide (VO 2 ) manifests an abrupt metal–insulator transition (MIT) from monoclinic to rutile phases, with potential use for tunable electronic and optical properties and spiking neuromorphic devices. Understanding pathways to modulate electronic transport in VO 2 , as well as its response to irradiation (e.g., for space applications), is critical to better enable these applications. In this work, we investigate the selective modulation of electronic transport in VO 2 films subject to different 10 keV helium ion (He + ) fluences. Under these conditions, the resistivity in the individual monoclinic and rutile phases varied by 50%–200%, while the MIT transformation temperature remains constant within 4 °C independent of irradiation fluence. Importantly, different trends in the resistivity of the monoclinic and rutile phases were observed both as a function of total He fluence as well as in films grown on different substrates (amorphous SiO 2 /Si vs single crystal Al 2 O 3 ). Through a combination of measurements including majority carrier sign via Seebeck, low frequency noise, and TEM, our investigation supports the presence of different kinds of point defects (V in; O in), which may arise due to grain boundary defect interactions. Our work suggests the utility of He irradiation for the selective modulation of VO 2 transport properties for neuromorphic, in contrast to other established but non-selective methods, like doping.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of thermal oxidation on helium implanted pure iron

The impact of thermal oxidation on Helium (He) implanted pure iron (Fe) was investigated to experimentally evaluate how thermal oxidation influences the diffusion and distribution of He within the material. In case of the sample with the lowest dose (2 × 10 17 ions/cm 2 ), the thinnest oxide layer was observed compared to the non-implanted pure Fe. It is due to He nano bubbles implanted in the material, which hinder the diffusion of Fe ions necessary for forming the oxide layer. For the medium dose sample (5 × 10 17 ions/cm 2 ), the oxide layer was slightly thicker than that of the lowest dose, however it had more porous structure due to the numerous nano He bubbles. In addition, a large bubble region around 150–200 nm depth was generated. Here, the highest dose sample (1 × 10 18 ions/cm 2 ) was observed that the escape of He was accelerated by the large amount of nano He bubbles from within the metal, forming a porous Fe matrix on the top surface and an oxide layer that is very porous but thicker than those of lower doses.

He implantation↗
DOE OSTI2022

Sample Preparation and Experimental Design for In Situ Multi-Beam Transmission Electron Microscopy Irradiation Experiments

We discuss the need to understand materials exposed to overlapping extreme environments such as high temperature, radiation, or mechanical stress. When these stressors are combined there may be synergistic effects that enable unique microstructural evolution mechanisms to activate. Understanding of these mechanisms is necessary for the input and refinement of predictive models and critical for engineering of next generation materials. The basic physics and underlying mechanisms require advanced tools to be investigated. The in situ ion irradiation transmission electron microscope (I 3 TEM) is designed to explore these principles. To quantitatively probe the complex dynamic interactions in materials, careful preparation of samples and consideration of experimental design is required. Particular handling or preparation of samples can easily introduce damage or features that obfuscate the measurements. There is no one correct way to prepare a sample; however, many mistakes can be made. The most common errors and things to consider are highlighted within. The I 3 TEM has many adjustable variables and a large potential experimental space, therefore it is best to design experiments with a specific scientific question or questions in mind. Experiments have been performed on large number of sample geometries, material classes, and with many irradiation conditions. The following are a subset of examples that demonstrate unique in situ capabilities utilizing the I 3 TEM. Au nanoparticles prepared by drop casting have been used to investigate the effects of single ion strikes. Au thin films have been used in studies on the effects of multibeam irradiation on microstructure evolution. Zr films have been exposed to irradiation and mechanical tension to examine creep. Ag nanopillars were subjected to simultaneous high temperature, mechanical compression, and ion irradiation to study irradiation induced creep as well. These results impact fields including: structural materials, nuclear energy, energy storage, catalysis, and microelectronics in space environments.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Influence of helium bubbles on the bulk equation of state of gold under static compression

Nuclear materials often evolve into two-phase systems comprising a bulk matrix with dispersed inert-gas bubbles. The presence of these bubbles can have consequences to the thermomechanical response of materials and is a key life-limiting factor in some nuclear fuel forms. Understanding the behavior of these two-phase, bubble-matrix systems is, thus, important to improved predictive models and frameworks for many nuclear materials applications. While temperature excursions of these two-phase systems have been characterized, fewer studies have focused on the evolution of inert-gas bubbles under pressure. Here, in this paper, we use x-ray tools to interrogate a He-implanted gold foil to determine the pressure-dependent evolution of the individual components (Au matrix + bubbles), and we compare that total pressure dependence to theoretical equation-of-state descriptions based on mixing rules.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Understanding the effect of minor alloying elements on helium bubble formation in ferritic-martensitic steels

Ferritic-martensitic steels are promising structural materials for advanced nuclear reactors. To minimize long-term radioactivity, reduced-activation ferritic-martensitic steels have been developed by substituting high-activation elements like Ni and Mo with low-activation elements such as W. However, the impact of these alloying modifications on helium bubble formation, which plays a key role in material swelling, remains unclear. Here, in this study, we compared helium bubble formation in ferritic-martensitic steel T91 and reduced-activation ferritic-martensitic steel F82H. Both materials were irradiated with sequential 100 keV, 150 keV, and 200 keV helium ions to a dose of 0.5 dpa and a helium concentration of 9,000 appm at 500°C. The helium bubbles in F82H exhibited a larger average size and a lower density than those in T91, suggesting differences in minor alloying elements may influence the bubble growth. Here, to investigate the effects of these alloying elements, we characterized radiation-induced segregation near bubbles and grain boundaries. Prominent Ni-Mn-Si enriched clusters were found near bubbles in T91, while only Mn-Si enriched clusters were found near bubbles in F82H. In addition, the obvious Cr enrichment near grain boundaries was absent around bubbles in both steels. The different segregation trends among elements revealed the variations in element diffusion mechanisms and the different sink biases between bubbles and grain boundaries. Cr enrichment near grain boundaries is mostly driven by interstitial-mediated diffusion. However, since bubble growth relies on net vacancy flux, vacancy-mediated diffusion plays a dominant role in controlling element segregation near bubbles. Therefore, Cr enrichment was not found near bubbles. Because of preferential vacancy-drag diffusion for Ni, Si and Mn, these elements were enriched near bubbles. Due to the strong binding energies of vacancies with these solute atoms, the vacancy diffusivity can be reduced near these solutes. Therefore, the more prominent Ni-Si-Mn clustered near helium bubbles in T91 lead to stronger suppression of helium bubble growth compared to F82H.

36 MATERIALS SCIENCE↗