SEARCH · Search NASA

Results for “heterogeneous nucleation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Condensation and its growth down the test-section of the Langley 0.3-m transonic cryogenic tunnel

Four total pressure probes were used to measure the growth of condensation down the test section of the Langley 0.3-m tunnel, and the condensation data were employed to verify a mathematical model which assumes condensation results from heterogeneous nucleation on preexisting seed particles. The onset of effects occurs throughout the test section at the same total temperature but the magnitude of the effects increases with increasing length down the test section. Condensation is important because it determines the minimum operating temperature of transonic cryogenic wind tunnels.

Hall, R. M.↗

NASA NTRS1979

Onset of condensation effects with an NACA 0012-64 airfoil tested in the Langley 0.3-meter transonic cryogenic tunnel

The onset of condensation effects as determined by varying the stagnation temperature was found to correlate better with the amount of supercooling in the free stream than it did with the supercooling in the region of maximum local Mach number over the air foil. Effects in the pressure distribution over the air foil were seen to appear over its entire length at nearly the same total temperature. Both observations suggest that heterogeneous nucleation does occur in the free stream. The benefits realized from supercooling are presented in terms of increased Reynolds number capability at a given tunnel total pressure and reduced drive-fan power and liquid nitrogen consumption if Reynolds number is held constant. Depending on total pressure and free-stream Mach number, these three benefits are found to vary respectively from 8 to 19 percent, 12 to 24 percent, and 9 to 19 percent. The data analysis and error estimates are given.

Hall, R. M.↗

NASA NTRS1981

Onset of condensation effects in cryogenic wind tunnels

The onset of condensation effects in cryogenic wind tunnels which limits their minimum operating temperatures is examined. If this onset of effects occurs below saturation temperature, then the tunnels may be operated at the lower temperatures and additional benefits to cryogenic tunnel operation resulting in increased Reynolds number capability and reduced operating costs. Both homogeneous and heterogeneous nucleation processes are discussed as they pertain to continuous flow cryogenic wind tunnels. Examples from condensation experiments in the 0.3 m Transonic Cryogenic Tunnel are also reviewed.

Hall, R. M.↗

NASA NTRS1981

Derivation of a heterogeneous lithic fragment in the Bovedy L-group chondrite from impact-melted porphyritic chondrules

Results are presented of petrographic, compositional and dating analyses of a light-colored lithic fragment in the L-group Bovedy meteorite that has a composition different from that of the host chondrite. Polished thin sections of the lithic fragment, host, and the fragment-host boundary were examined microscopically and analyzed by electron microprobe, metallic Ni-Fe, and instrumental neutron activation techniques; chips of the fragment were also used for Ar-39/Ar-40 dating and oxygen isotope analyses. The poikilitic textures, olivine, low-Ca pyroxene and kamacite composition and low Na2O, K2O and P2O5 contents of the fragment indicate that it represents a solidified, slightly fractionated impact melt formed from a source rich in porphyritic chondrules. A progressive increase on MgO content across the fragment is accounted for by the heterogeneous nucleation of MgO-rich phases. The Ar data indicate that the Bovedy lithic fragment and its host were partly degassed of radiogenic Ar less than 0.94 billion years ago, probably due to shock. The data are consistent with a cooling rate of about 5 C/million years through 500 C, which must have resulted from the burial of the assemblage beneath insulating material on the parent body at depths of at least several km.

Rubin, A. E.↗

NASA NTRS1982

Meteorological assessment of SRM exhaust products' environmental impact

The environmental impact of solid rocket motor (SRM) exhaust products discharged into the free air stream upon the launching of space vehicles that depend upon SRM boosters to obtain large thrust was assessed. The emission of Al2O3 to the troposphere from the SRMs in each Shuttle launch is considered. The Al2O3 appears as particles suitable for heterogeneous nucleation of hydrochloric acid which under frequently occurring atmospheric conditions may form a highly acidic rain capable of damaging property and crops and of impacting upon the health of human and animal populations. The cloud processes leading to the formation of acid rain and the concentration of the acid that then reaches the ground, and the atmospheric situations that lead to the production of cloud and rain at and near a launch site, and the prediction of weather conditions that may permit or prohibit a launch operation are studied.

Dingle, A. N.↗

NASA NTRS1982

Containerless processing of Nb-Ge alloys in a long drop tube

The thirty-two meter drop tube at the Marshall Space Flight Center was used to study the effect of zero gravity containerless processing on the structure and properties of materials. The concept involves the suppression of heterogeneous nucleation of solid in liquid and, therefore, solidification accompanied by large degrees of undercooling. Under these conditions metastable phases can be formed or, at the very least, unique nonequilibrium microstructures (containing equilibrium phases) with unique properties can be produced. The drop tube solidification was applied to niobium base alloys with emphasis on the Nb-Ge binary system in an effort to produce metastable phases with high superconducting transition temperatures in bulk specimens. In the past, only lower Ge alloys (Nb-13 a/o, Nb-18 a/o, and Nb-22 a/o) could be undercooled. Higher Ge alloys (e.g., Nb-25 a/o Ge and Nb-27 a/o Ge) can now be undercooled on a routine basis.

Bayuzick, R. J.↗

NASA NTRS1983

Review of the containerless processing technologies and facilities

Material processing techniques which can most fully utilize the advantages provided by space are related to containerless processing. An avoidance of physical contact between the melt and the walls of a container leads to an elimination of container-induced contamination and heterogeneous nucleation. Containerless processing facilities development by NASA will provide a basis for the performance of precursor experiments and processing technologies studies prior to Space Shuttle flights. Attention is given to acoustic containerless processing, electromagnetic containerless processing, electrostatic levitation technology, drop tubes, and the use of zero-G KC-135 aircraft flights for tests and training purposes.

Wang, T. G.↗

NASA NTRS1984

Dynamic crystallization of silicate melts

Two types of furnaces with differing temperature range capabilities were used to provide variations in melt temperatures and cooling rates in a study of the effects of heterogeneous nucleation on crystallization. Materials of chondrule composition were used to further understanding of how the disequilibrium features displayed by minerals in rocks are formed. Results show that the textures of natural chondrules were duplicated. It is concluded that the melt history is dominant over cooling rate and composition in controlling texture. The importance of nuclei, which are most readily derived from preexisting crystalline material, support an origin for natural chondrules based on remelting of crystalline material. This would be compatible with a simple, uniform chondrule forming process having only slight variations in thermal histories resulting in the wide range of textures.

Russell, W. J.↗

NASA NTRS1985

Gel Precursors as Glass and Ceramic Starting Materials for Space Processing Applications Research

The crystallization kinetics and glass forming ability of reluctant glass formers is investigated. This could ultimately aid the formation of bulk samples of unique glass compositions outside of normal glass forming regions allowing the optimization of certain properties of the glass. One important aspect of processing in space is the containerless undercooling of molten substances. Theoretically, the extent of undercooling can be greatly enhanced by solidifying in the absence of heterogeneous nucleation resulting from contact with crucibles or molds. Techniques were established for the measurement of crystallization kinetics and critical cooling rates. The glass formation ability and crystallization kinetics of Ga2O-43CaO and several Al2O3-CaO compositions were measured. An apparatus was set up to measure the temperature of spherical samples on a thermocouple at large cooling rates. The time and temperature of nucleation is recorded and the probability of nucleation at various cooling rates can be measured.

Downs, R. L.↗

NASA NTRS1985

Glass Formation in Reluctant Glass Formers

The crystallization kinetics and glass forming ability of reluctant glass formers is investigated. This could ultimately aid the formation of bulk samples of unique glass compositions outside of normal glass forming regions allowing the optimization of certain properties of the glass. One important aspect of processing space is the containerless undercooling of molten substances. Theoretically, the extent of undercooling can be greatly enhanced by solidifying in the absence of heterogeneous nucleation resulting from contact with crucibles or molds. Techniques were established for the measurement of crystallization kinetics and critical cooling rates. The glass formation ability and crystallization kinetics of Ga2O-43CaO and several Al2O3-CaO compositions were measured. An apparatus was set up to measure the temperature of spherical samples on a thermocouple at large cooling rates. The time and temperature of nucleation is recorded and the probability of nucleation at various cooling rates can be measured.

Ethridge, E. C.↗

NASA NTRS1986

Containerless processing of hypermonotectic and glass forming alloys using the Marshall Space Flight Center 100 meter drop tube facility

Two separate projects were carried out to study alloys whose solidification structures can be strongly influenced by the presence of a container during melting and solidifications. One project involved containerless solidification of hypermonotectic Au35Rh65 alloys. This alloy exhibits liquid immiscibility over a temperature range. It has been suggested that containerless melting might be one solution to the problem of sedimentation in the dispersions of immiscible liquid phases. However, surface tension driven flows could also lead to accumulation of the minority liquid phase at the external surface of a containerlessly melted alloy. The research underway is a first step in determining the influence of containerless, microgravity processing on immiscible alloys. Nickel-niobium alloys were studied using the drop tube facility. One alloy in this system, a Ni60Nb40 alloy, is a good candidate for the formation of a bulk metallic glass. Amorphous alloys of this composition were produced using thin film and mechanical alloying techniques. However, theory indicates that if heterogeneous nucleation can be avoided, it should be possible to produce an amorphous structure in this system using a moderate cooling rate from the melt. The containerless melting and solidification capabilities of the drop tube faciltiy provide ideal conditions for a study of this type. To date, several Ni60Nb40 samples have been levitated, melted and cooled during 4.6 seconds of free fall in the 100 meter drop tube. Structures obtained are discussed.

Andrews, J. B.↗

NASA NTRS1985

Balloon-borne observation of Aitken nuclei in the Antarctic stratosphere and troposphere

Aitken nuclei (0.002 or = r or = 0.1 microns in the atmosphere are produced through gas-to-particle conversion processes, and they grow in size by heterogeneous nucleation processes and others to produce larger aerosol particles. In the study of global background aerosol pollution, full knowledge of such aerosol processes in the clean atmosphere is essentially required. In this sense, it is important to examine the behavior of aerosols in a clean atmosphere which is not contaminated directly by aerosols and gases emitted from the Earth's surface. The Antarctic atmosphere is thought to be such a clean atmosphere. From an extensive surface observation of aerosols carried out at Syowa Station (69 deg 00'S, 39 deg 35'E) Antarctica, it has been revealed that various phenomena relating to long-range transport of trace constituents and/or photochemical processes resulting in production or growth of aerosol particles are clearly observed in Antarctica. This paper gives a preliminary report of observations made by balloon-borne Aitken nuclei sonde in 1983, at Syowa Station.

Ito, T.↗

NASA NTRS1986

Glass formation and crystallization of high lead content PbO-B2O3 compositions

The glass-forming and undercooling ability of PbO-B2O3 melts in the 2PbO.B2O3 to 4PbO.B2O3 composition range were studied. The glass formation propensities were investigated as a function of cooling rate and sample mass. A qualitative investigation of the crystallization process(es) preventing glass formation was made, and it was concluded that under normal circumstances heterogeneous nucleation was the common occurrence. Hence, it was concluded that such compositions are prime candidates for containerless experiments aboard the Space Shuttle.

Weinberg, Michael C.↗

NASA NTRS1987

Experimental constraints on heating and cooling rates of refractory inclusions in the early solar system

The refractory inclusions in carbonaceous chondrites were the subject of considerable interest since their discovery. These inclusions contain minerals that are predicted to be some of the earliest condensates from the solar nebula, and contain a plethora of isotopic anomalies of unknown origin. Of particular interest are those coarse-grained inclusions that contain refractory metal particles (Fe, Ni, Pt, Ru, Os Ir). Experimental studies of these inclusions in terrestrial laboratories are, however, complicated because the dense particles tend to settle out of a molten or partially molten silicate material. Heating experiments in the Space Station technology and microgravity in order to observe the effects of metal nuggets (which may act as heterogeneous nucleation sites) on nucleation rates in silicate systems and to measure simultaneously the relative volatilization rate of siderophile and lithophile species. Neither experiment is possible in the terrestrial environment.

Boynton, W. V.↗

NASA NTRS1988

P/M aluminum metal matrix composites

Development of lightweight, high specific stiffness engineered materials has been the long term goal of many investigators. Recently, this quest has focused on discontinuously reinforced aluminum metal matrix composites. This paper reviews the fabrication of powder metallurgy discontinuously reinforced metal matrix composites. Emphasis is given to the differences in heat treatment response reported between unreinforced and reinforced powder metallurgy materials. It is proposed that these observations can be rationalized by considering the effects of pre-existing heterogeneous nucleation sites, i.e., the dislocation substructure developed during rapid cooling of discontinuously reinforced aluminum metal matrix composites, on precipitation in reinforced aluminum alloys.

Rack, H. J.↗

NASA NTRS1990

Experiments for electromagnetic levitation in microgravity

Containerless processing is a promising research tool for investigating the properties of undercooled melts and their solidification. For conducting samples RF-electromagnetic levitation offers the possibility to obtain large undercoolings by avoiding heterogeneous nucleation at container walls. On earth, however, strong magnetic fields are needed to compensate the gravitational force which imposes a lower limit on the available temperatures and on the accessible undercooling range. Under microgravity conditions the magnetic positioning fields can be minimized and hence, undercooling becomes feasible under ultra-high vacuum conditions and lower temperatures become accessible. In contrast to other undercooling and solidification techniques, electromagnetic levitation allows for diagnostic measurements during the early steps of nucleation and phase selection. Experiments cover a wide field of research topics: nucleation, directional solidification at high velocities, generation of metastable phases, evolution of microstructures, properties of undercooled liquids. Examples from these classes including experiments selected for the IML-2 mission are discussed with emphasis on technical requirements. An overview is given on the German TEMPUS (electromagnetic levitation facility) program.

Willnecker, R.↗

NASA NTRS1990

Reluctant glass formers and their applications in optical lens design

Over ten years ago, it was shown that glasses with high index of refraction and some with low dispersion could be produced from a number of pure refractory oxides, including the lanthanides, by containerless processing. By containerless processing it is possible to minimize surface heterogeneous nucleation and produce larger glass samples of the materials than by other methods. The use of proposed high temperature containerless processing facilities in space permits the fabrication of benchmark samples of new unique glass compositions for optical property determination as well as for glass formation. It was shown that glasses with high refractive indices and large Abbe numbers can be formulated using this technology. These glasses lie in the classical forbidden region of the glass map. Preliminary study of the impact of having such unusual glasses available for the lens designer was made. Results indicate that significant improvements can be realized over the use of only conventional glasses. A cursory survey of a number of nationally recognized lens designers indicated a general agreement that such glasses would be highly desired and could be expected to lead to completely new designs as well as simplifying existing designs.

Ethridge, Edwin C.↗

NASA NTRS1990

The mechanisms of dispersion strengthening and fracture in Al-based XD(tm) alloys, part 1

The influence of reinforcement size, volume fraction, and matrix deformation behavior on room and elevated temperature strength; the fracture toughness; and the fatigue crack growth rate of metal matrix composites of Al-4(pct)Cu-1.5(pct)Mg with TiB2 were examined. The influence of reinforcement volume fraction was also examined for pure aluminum with TiB2. Higher TiB2 volume fractions increased the tensile yield strength at both room and elevated temperatures, and reduced the elongation to fracture. Tensile tests also indicate that small particles provided a greater increase in strength for a given volume fraction than larger particles, whereas elongation to fracture appeared to be insensitive to reinforcement size. Interparticle spacing appears to be the factor that controls the strength of these alloys, with the exact nature of the dependence relying on the nature of dislocation slip in the matrix (planar vs. diffuse). The isothermal aging response of the precipitation strengthened Al-4(pct)Cu-1.5(pct)Mg alloys was not accelerated by the presence of TiB2. Cold work prior to artificial aging created additional geometrically necessary dislocations which serve as heterogeneous nucleation sites leading to accelerated aging, a finer precipitate size, and an increase in the strength of the alloy.

Aikin, R. M., Jr.↗