TC2.1 High Aspect Ratio Optimal Wing (HARW)
Explore the source record for details and available documents.
Daniel M Williams↗
SEARCH · Search NASA
Results for “high aspect ratio wing”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Winglet effects on the flutter of twin-engine-transport type wing
Flutter characteristics of a cantilevered high aspect ratio wing with winglet were investigated. The configuration represented a current technology, twin-engine airplane. A low-speed and a high-speed model were used to evaluate compressibility effects through transonic Mach numbers and a wide range of mass-density ratios. Four flutter mechanisms were obtained in test, as well as analysis from various combinations of configuration parameters. The coupling between wing tip vertical and chordwise motions was shown to have significant effect under some conditions. It is concluded that, for the flutter model configurations studied, the winglet related flutter was amenable to the conventional flutter analysis techniques.
Bhatia, K. G.↗
An experimental investigation of an oblique-wing and body combination at Mach numbers between 0.60 and 1.40
An experimental investigation was conducted in an 11- by 11-foot wind tunnel to determine the aerodynamic characteristics of an oblique high aspect ratio wing in combination with a high fineness-ratio Sears-Haack body. Longitudinal and lateral-directional stability data were obtained at wing yaw angles from 0 deg to 60 deg over a test Mach number range from 0.6 to 1.4 for angles of attack between minus 6 deg and 9 deg. The effects of changes in Reynolds number, dihedral, and trailing-edge angle were studied along with the effects of a roughness strip on the upper and lower surfaces of the wing. Flow-visualization studies were made to determine the nature of the flow on the wing surfaces.
Graham, L. A.↗
An experimental investigation of three oblique-wing and body combinations at Mach numbers between 0.60 and 1.40
An experimental investigation was conducted in an 11- by 11-foot transonic wind tunnel to determine the aerodynamic characteristics of three oblique high aspect ratio wings in combination with a high fineness-ratio Sears-Haack body. The three wings had the same elliptical planform and base line curvature but had different airfoil sections. One wing had an airfoil section designed to have a lift coefficient of 1.0 at a Mach number of 0.7, another to have shock-free supersonic flow over the upper surface, and the other to have a lift coefficient of 1.3 at a Mach number of 0.6. Longitudinal and lateral-directional stability data were obtained at wing yaw angles of 0 deg, 45 deg, 50 deg, and 60 deg over a test Mach number range from 0.6 to 1.4 for angles of attack between minus 7 deg and 9 deg. Reynolds numbers for the study were 4 and 6 million per foot. Flow-visualization studies were made to examine the nature of the flow on the wing surfaces. Notable differences were found in the aerodynamic characteristics of the three wing-body combinations, particularly in the lateral-directional characteristics.
Graham, L. A.↗
Elastic deformation effects on aerodynamic characteristics for a high-aspect-ratio supercritical-wing model
The results of an investigation of the deformations of a high-aspect-ratio, force/pressure, supercritical-wing model during wind tunnel tests and the effects these deformations have on the wing aerodynamics are presented. A finite element model of the wing was developed, and then, for conditions corresponding to wind tunnel test points, experimental aerodynamic loads and theoretical aerodynamic loads were applied to the finite element model. Comparisons were made between the results of these load conditions for changes in structural deflections and for changes in aerodynamic characteristics. The results show that the deformations are quite small and that the pressure data are not significantly affected by model deformation.
Watson, J. J.↗
Low-speed wind-tunnel studies relating to pitch-up on a supersonic transport model with a high-aspect-ratio variable-sweep wing
Low speed wind tunnel testing of high aspect ratio variable sweep wing supersonic transport model for determining methods of reducing pitch-up tendency
PITCH CONTROL↗
A study of high-altitude manned research aircraft employing strut-braced wings of high-aspect-ratio
The effect of increased wing aspect ratio of subsonic aircraft on configurations with and without strut bracing. Results indicate that an optimum cantilever configuration, with a wing aspect ratio of approximately 26, has a 19% improvement in cruise range when compared to a baseline concept with a wing aspect ratio of approximately 10. An optimum strut braced configuration, with a wing aspect ratio of approximately 28, has a 31% improvment in cruise range when compared to the same baseline concept. This improvement is mainly due to the estimated reduction in wing weight resulting from use of lifting struts. All configurations assume the same mission payload and fuel. The drag characteristics of the wings are enhanced with the use of laminar flow airfoils. A method for determining the extent of attainable natural laminar flow, and methods for preliminary structural design and for aerodynamic analysis of wings lifting struts are presented.
Smith, P. M.↗
Investigation at Low Speeds of Deflectors and Spoilers as Gust Alleviators on a Model of the Bell X-5 Airplane with 35 Degree Swept Wings and on a High-aspect-ratio 35 Degree Swept-wing-fuselage Model
Results of an investigation at low speeds to determine the gust-alleviation capabilities (reduction in lift-curve slope) of spoilers and deflectors on a 35 degree swept-wing model of high aspect ratio and on a 1/4-scale model of the X-5 airplane with 35 degree swept wings indicate that deflector and spoiler-deflector types of controls can be designed to provide considerable gust alleviation for a swept-wing airplane while still maintaining stability and control.
CONTROLS, SPOILER - COMPLETE WINGS↗
Steady State Thermal Analyses of SCEPTOR X-57 Wingtip Propulsion
Electric aircraft concepts enable advanced propulsion airframe integration approaches that promise increased efficiency as well as reduced emissions and noise. NASA's fully electric Maxwell X-57, developed under the SCEPTOR program, features distributed propulsion across a high aspect ratio wing. There are 14 propulsors in all: 12 high lift motor that are only active during take off and climb, and 2 larger motors positioned on the wingtips that operate over the entire mission. The power electronics involved in the wingtip propulsion are temperature sensitive and therefore require thermal management. This work focuses on the high and low fidelity heat transfer analysis methods performed to ensure that the wingtip motor inverters do not reach their temperature limits. It also explores different geometry configurations involved in the X-57 development and any thermal concerns. All analyses presented are performed at steady state under stressful operating conditions, therefore predicting temperatures which are considered the worst-case scenario to remain conservative.
Thermal↗
Flutter parametric studies of cantilevered twin-engine-transport type wing with and without winglet. Volume 1: Low-speed investigations
Flutter characteristics of a cantilevered high aspect ratio wing with winglet were investigated. The configuration represented a current technology, twin-engine airplane. A low-speed and high-speed model were used to evaluate compressibility effects through transonic Mach numbers and a wide range of mass-density ratios. Four flutter mechanisms were obtained in test, as well as analysis from various combinations of configuration parameters. The coupling between wing tip vertical and chordwise motions was shown to have significant effect under some conditions. It is concluded that for the flutter model configurations studied, the winglet related flutter was amenable to the conventional flutter analysis techniques.
Bhatia, K. G.↗
Novel Control Effectors for Truss Braced Wing
At cruise flight conditions very high aspect ratio/low sweep truss braced wings (TBW) may be subject to design requirements that distinguish them from more highly swept cantilevered wings. High aspect ratio, short chord length and relative thinness of the airfoil sections all contribute to relatively low wing torsional stiffness. This may lead to aeroelastic issues such as aileron reversal and low flutter margins. In order to counteract these issues, high aspect ratio/low sweep wings may need to carry additional high speed control effectors to operate when outboard ailerons are in reversal and/or must carry additional structural weight to enhance torsional stiffness. The novel control effector evaluated in this study is a variable sweep raked wing tip with an aileron control surface. Forward sweep of the tip allows the aileron to align closely with the torsional axis of the wing and operate in a conventional fashion. Aft sweep of the tip creates a large moment arm from the aileron to the wing torsional axis greatly enhancing aileron reversal. The novelty comes from using this enhanced and controllable aileron reversal effect to provide roll control authority by acting as a servo tab and providing roll control through intentional twist of the wing. In this case the reduced torsional stiffness of the wing becomes an advantage to be exploited. The study results show that the novel control effector concept does provide roll control as described, but only for a restricted class of TBW aircraft configurations. For the configuration studied (long range, dual aisle, Mach 0.85 cruise) the novel control effector provides significant benefits including up to 12% reduction in fuel burn.
White, Edward V.↗
The Edge supersonic transport
As intercontinental business and tourism volumes continue their rapid expansion, the need to reduce travel times becomes increasingly acute. The Edge Supersonic Transport Aircraft is designed to meet this demand by the year 2015. With a maximum range of 5750 nm, a payload of 294 passengers and a cruising speed of M = 2.4, The Edge will cut current international flight durations in half, while maintaining competitive first class, business class, and economy class comfort levels. Moreover, this transport will render a minimal impact upon the environment, and will meet all Federal Aviation Administration Part 36, Stage III noise requirements. The cornerstone of The Edge's superior flight performance is its aerodynamically efficient, dual-configuration design incorporating variable-geometry wingtips. This arrangement combines the benefits of a high aspect ratio wing at takeoff and low cruising speeds with the high performance of an arrow-wing in supersonic cruise. And while the structural weight concerns relating to swinging wingtips are substantial, The Edge looks to ever-advancing material technologies to further increase its viability. Heeding well the lessons of the past, The Edge design holds economic feasibility as its primary focus. Therefore, in addition to its inherently superior aerodynamic performance, The Edge uses a lightweight, largely windowless configuration, relying on a synthetic vision system for outside viewing by both pilot and passengers. Additionally, a fly-by-light flight control system is incorporated to address aircraft supersonic cruise instability. The Edge will be produced at an estimated volume of 400 aircraft and will be offered to airlines in 2015 at $167 million per transport (1992 dollars).
Agosta, Roxana↗
Extensible Traffic Management (xTM) - High-altitude Operations and Beyond
The technology development of balloons, airships, and high-altitude long-endurance (HALE) high-aspect-ratio wing aerial vehicles has expedited the deployment of high-altitude operations above Flight Level (FL) 600. It allows broader communication service area coverage than at ground level and enables efficient and precise earth observation to help address global climate change. Meanwhile, a record number of orbital launches were conducted in 2021. New mission concepts including those for small satellites, satellite constellations, suborbital tourism and point to point cargo transport are being developed. To enable efficient and safe operations of new-entrant vehicles and to alleviate the potential burden on air traffic controllers, the concept of Unmanned aircraft systems Traffic Management (UTM) explored a different approach requiring cooperative operations among operators/pilots through operational intent sharing and coordination. This concept has been extended and proposed by the community to handle traffic management for high-altitude operations. While the concept and basic system were tested in UTM, there are many critical capabilities needed for high-altitude operations. This talk will introduce the challenges brought by high-altitude operations and space operations and on-going research activities in developing critical capabilities for extensible traffic management at NASA.
Extensible Traffic Management↗
The EET Horizontal Tails Investigation and the EET Lateral Controls Investigation
In the energy efficient transport (EET) Horizontal Tails Investigation, aerodynamic data were measured for five different horizontal tails on a full span model with a wide body fuselage. Three of the horizontal tails were low tail configurations and two were T tail configurations. All tails were tested in conjunction with two wings, a current wide body wing and a high aspect ratio supercritical wing. Local downwash angles and dynamic pressures in the vicinity of the tails were measured using a yaw head rake. The results provide a comparison of the aerodynamic characteristics of the two wing configurations at trimmed conditions for Mach numbers between 0.60 and 0.90. In the EET Lateral Controls Investigation, the control effectiveness of a conventional set of lateral controls was measured over a Mach number range from 0.60 to 0.90 on a high aspect ratio supercritical wing semispan model. The conventional controls included a high speed aileron, a low speed aileron, and six spoiler segments. The wing was designed so that the last 25% of the chord is removable to facilitate testing of various control systems. The current status and an indication of the data obtained in these investigations are presented.
Jacobs, P. F.↗
Flutter parametric studies of cantilevered twin-engine transport type wing with and without winglet. Volume 2: Transonic and density effect investigations
Flutter characteristics of a cantilevered high aspect ratio wing with winglet were investigated. The configuration represented a current technology, twin engine airplane. Compressibility effects through transonic Mach numbers and a wide range of mass-density ratios were evaluated on a low speed and high speed model. Four flutter mechanisms were obtained from test, and analysis from various combinations of configuration parameters. It is shown that the coupling between wing tip vertical and chordwise motions have significant effect under some conditions. It is concluded that for the flutter model configurations studied, the winglet related flutter is amenable to the conventional flutter analysis techniques. The low speed model flutter and the high-speed model flutter results are described.
Bhatia, K. G.↗
A compilation of the pressures measured on a wing and aileron with various amounts of sweep in the Langley 8-foot high-speed tunnel
A compilation is made in tabular form of all the pressures measured on a thin high-aspect-ratio wing and aileron with no sweep and with 30 degree and 45 degree of sweepback and sweepforward at high subsonic Mach numbers in the Langley 8-foot high-speed tunnel.
MACH NUMBER EFFECTS - COMPLETE WINGS↗
Transonic swept-wing analysis using asymptotic and other numerical methods
The paper presents asymptotic methods for high-aspect-ratio wings in transonic flow developed for straight unyawed wings and for oblique wings. They show that the three-dimensional mixed-flow calculations may be reduced to solving a set of two-dimensional problems at each span station; the development of this theory and the related computational studies are reviewed. Differences between the piloted (oblique) wing, the swept-back wing, and the swept-forward-wing in the induced upwash are discussed; examples of similarity solutions are demonstrated for high subcritical and slightly supercritical component flows, and comparisons made with relaxation solutions of a full potential equation. The examples include oblique and symmetric swept wings, and the adequacy of the existing full-potential computer code is examined.
Cheng, H. K.↗
Validation of a transonic analysis code for use in preliminary design of advanced transport configurations
The WBPPW code has the capability of analyzing flow-field effects about configurations which include wing pylons and engine nacelles or pods in addition to the basic wing/fuselage combination. Using the concept of grid embedding, the code solves the extended small disturbance transonic flow equation for complex flow interactions of the various configuration components. A general description of the code and solution algorithm is included. Results are presented and compared with experiment for various configurations which encompass the code capabilities. These include wing planform and wing contour modifications and variations in nacelle position beneath a high-aspect-ratio wing. Results are analyzed in the light of preliminary design, where the capability to accurately compute flow-field effects resulting from various configuration perturbations is important. The comparisons show that the computational results are sensitive to subtle design modifications and that the code could be used as an effective guide during the design process for transport configurations.
Waggoner, E. G.↗