Search NASA⌕ Search

SEARCH · Search NASA

Results for “high crystallinity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Discovering and Designing a Chimeric Hyperthermophilic Chitinase for Crystalline Chitin Degradation

Chitin is one of the most abundant renewable biopolymers on earth. However, it is highly crystalline and recalcitrant to degrade. Here, we report a hyperthermophilic chitinase (ActChi) to directly hydrolyze crystalline chitin at its optimal temperature of 80 °C. It contains a malectin domain, a fibronectin type-III (Fn3) domain, and a catalytic domain (CD chi ). Both Fn3 and malectin have the function of chitin binding domain (ChBD) to increase the activity. Fn3 also significantly increases thermostability, but malectin decreases it. To enhance both activity and thermostability, here we introduced a heterogeneous and hyperthermophilic ChBD at the N-terminus of CD chi to obtain ChBD-CD chi . The activity of this hybrid enzyme is 201 U/μmol for crystalline chitin, which has increased 400% compared with that of ActChi. In addition, ChBD-CD chi can continuously degrade crystalline chitin for more than 4 days at 70 °C to increase the overall hydrolysis rate. The strategy is a good example of green sustainable degradation for crystalline biopolymer in nature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Characterization of Shallow, Undoped Ge/SiGe Quantum Wells Commercially Grown on 8-in. (100) Si Wafers

Hole spins in Ge quantum wells have shown success in both spintronic and quantum applications, thereby increasing the demand for high-quality material. We performed material analysis and device characterization of commercially grown shallow and undoped Ge/SiGe quantum well heterostructures on 8-in. (100) Si wafers. Material analysis reveals the high crystalline quality, sharp interfaces, and uniformity of the material. We demonstrate a high mobility (1.7 × 10 5 cm 2 V –1 s –1 ) 2D hole gas in a device with a conduction threshold density of 9.2 × 10 10 cm –2 . We study the use of surface preparation as a tool to control barrier thickness, density, mobility, and interface trap density. We report interface trap densities of 6 × 10 12 eV –1 . Our results validate the material’s high quality and show that further investigation into improving device performance is needed. We conclude that surface preparations which include weak Ge etchants, such as dilute H 2 O 2 , can be used for postgrowth control of quantum well depth in Ge-rich SiGe while still providing a relatively smooth oxide–semiconductor interface. Our results show that interface state density is mostly independent of our surface preparations, thereby implying that a Si cap layer is not necessary for device performance. Transport in our devices is instead limited by the quantum well depth. Commercially sourced Ge/SiGe, such as studied here, will provide accessibility for future investigations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Two-Dimensional Palladium Diselenide with Strong In-Plane Optical Anisotropy and High Mobility Grown by Chemical Vapor Deposition

Two-dimensional (2D) palladium diselenide (PdSe 2 ) has strong interlayer coupling and a puckered pentagonal structure, leading to remarkable layer-dependent electronic structures and highly anisotropic in-plane optical and electronic properties. However, the lack of high-quality, 2D PdSe 2 crystals grown by bottom-up approaches limits the study of their exotic properties and practical applications. In this work, chemical vapor deposition growth of highly crystalline few-layer (≥2 layers) PdSe 2 crystals on various substrates is reported. The high quality of the PdSe 2 crystals is confirmed by low-frequency Raman spectroscopy, scanning transmission electron microscopy, and electrical characterization. In addition, strong in-plane optical anisotropy is demonstrated via polarized Raman spectroscopy and second-harmonic generation maps of the PdSe 2 flakes. A theoretical model based on kinetic Wulff construction theory and density functional theory calculations is developed and described the observed evolution of “square=like” shaped PdSe 2 crystals into rhombus due to the higher nucleation barriers for stable attachment on the (1,1) and (1,-1) edges, which results in their slower growth rates. Finally, few-layer PdSe 2 field-effect transistors reveal tunable ambipolar charge carrier conduction with an electron mobility up to ≈294 cm 2 V -1 s -1 , which is comparable to that of exfoliated PdSe 2 , indicating the promise of this anisotropic 2D material for electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Inelastic Neutron Scattering from Thin Film Biaxially Oriented Polyethylene Terephthalate

Recent interest in emerging processes for polymer manufacturing and bio-based chemistries for direct chemical recycling/upcycling has motivated new research focused on a deeper understanding of atomic-scale polymer properties and how they influence macroscopic phenomena. Uncovering the fundamental properties of polymers that give rise to macroscopic behavior could enable new pathways for improved recyclability or utilization of alternative “greener” polymer analogues. In this study, the neutron vibrational spectrum was measured for a film of biaxially oriented polyethylene terephthalate (BoPET) using inelastic neutron scattering (INS), to investigate the relationship between the structure and dynamics of a widely used polymer. Compared to conventional spectroscopic techniques, the use of INS is advantageous for polymeric materials due to the absence of selection rules (i.e., all transitions are allowed), broad-band energy range, and considerable sensitivity to hydrogen modes. In order to distinguish the vibrational modes caused by trans and gauche rotational isomerism, the normal modes of vibration were calculated from a density functional theory-optimized structure of crystalline PET (cPET), representative of the all-trans state, and compared with INS from “highly crystalline” PET powder. Although in- and out-of-plane wagging of hydrogens on the ring structure exhibit significant contribution to both BoPET and cPET spectra, the wagging, rocking, and twisting modes of hydrogen on the ethylene glycol group are, in most cases, conformation-specific. These results were further rationalized by investigating the role of hyperconjugation in stabilizing both conformations using the natural bond order method. Here, through comparison of experimental and calculated INS results, this work provides the fundamental basis for discovering the role of structure and dynamics in shaping the macroscopic properties of PET and polymer analogues.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Baking and plasma pretreatment of sapphire surfaces as a way to facilitate the epitaxial plasma-enhanced atomic layer deposition of GaN thin films

The growth of high-quality epitaxial gallium nitride (GaN) thin films is achieved by using a baking and plasma pretreatment of the substrate prior to the GaN plasma-enhanced atomic layer deposition (PE-ALD). In this work, it is found that such pretreatment makes the GaN films grow coherently on sapphire substrates, following a layer-by-layer growth mechanism. The deposited GaN film shows high crystalline quality, a sharp GaN/sapphire interface, and a flat surface. The possibility of growing high-quality GaN epilayers in this way broadens the range of applications for PE-ALD in GaN-based devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

CRADA Number NFE-18-07342 with Lux Semiconductors, LLC (CRADA Final Report)

Lux Semiconductors is a flexible microelectronics startup developing a new class of Systemon-Foil electronics for rapidly emerging Internet-of-Things (IoT) markets. By leveraging its patent pending breakthrough in thin-film recrystallization, Lux is able to produce highly crystalline and flexible silicon substrates on a thin metal backing. This novel platform allows for high-speed silicon circuitry to be patterned directly into the substrate alongside low-cost printed electronics. The System-on-Foil approach has potential to enable the fabrication and integration of all core IoT functionality, including microprocessors, sensors, antennas, interconnects, and power supplies, required to enable highly durable, low profile, flexible electronics.

42 ENGINEERING↗
DOE OSTI2023

Sensitive and robust thin film X-ray detector using 2D layered perovskite diodes

A radiation detector includes a p-i-n architecture including a p-type contact layer, an n-type contact layer, and an intrinsic layer between the p-type contact layer and the n-type contact layer. The intrinsic layer includes a thin film comprising a highly crystalline 2D layered perovskite material. The radiation detectors according to embodiments of the present disclosure generate high open circuit voltages, have good detecting photon density limits and high sensitivities, and can be self-powered.

Tsai, Hsinhan↗
DOE OSTI2024

Impact of Linker Engineering in Core‐Linked Dimeric Acceptors for High‐Performance Organic Solar Cells

Abstract The dimerization of small molecule acceptors (SMAs) is a promising strategy for enhancing the long‐term stability and power conversion efficiency (PCE) of organic solar cells (OSCs). However, the reported DSMAs are primarily limited to end‐linked molecular configurations, highlighting the need for further exploration of various dimer architectures. Herein, the development of two distinct core‐linked dimerized SMAs (DYF‐V and DYF‐E) are reported with tailored linker structures (vinylene and ethynyl, respectively), achieving high‐performance OSCs (PCE = 18.53%). Interestingly, a subtle change in the linker structures results in markedly different molecular properties and photovoltaic performances of the dimer acceptors. DYF‐E with an ethynyl linker exhibits more twisted backbone conformation and mitigated aggregation property compared to DYF‐V, inducing desirable blend morphologies with a polymer donor including high crystallinity, face‐on oriented packing structures, and well‐intermixed domains. Thus, the DYF‐E‐based OSCs exhibit a high PCE (17.02%), which significantly outperforms the DYF‐V‐based OSCs (PCE = 9.98%). Furthermore, the ternary OSCs based on DYF‐E achieve a higher PCE of 18.53%. Thus, this study highlights the significance of selecting an appropriate linker in core‐linked dimerized SMAs for producing high‐performance OSCs.

Oh, Shinbee↗
DOE OSTI2021

Synergy between Photoluminescence and Charge Transport Achieved by Finely Tuning Polymeric Backbones for Efficient Light-Emitting Transistor

The lack of design principle for developing high-performance polymer materials displaying strong fluorescence and high ambipolar charge mobilities limited their performance in organic light-emitting transistors (OLETs), electrically pumped organic laser, and other advanced electronic devices. Here, a series of semiladder polymers by copolymerization of weak acceptors (TPTQ or TPTI) and weak donors (fluorene (F) or carbazole (C)) have been developed for luminescent and charge transporting properties. It was found that enhanced planarity, high crystallinity, and a delicate balance in interchain aggregation obtained in the new copolymer, TPTQ-F, contributed to high ambipolar charge mobilities and photoluminescent quantum yield. TPTQ-F showed excellent performance in solution-processed multilayered OLET devices with an external quantum efficiency (EQE) of 5.3%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ionic Pairs-Engineered Fluorinated Covalent Organic Frameworks Toward Direct Air Capture of CO 2

The covalent organic frameworks (COFs) possessing high crystallinity and capability to capture low-concentration CO 2 (400 ppm) from air are still underdeveloped. The challenge lies in simultaneously incorporating high-density active sites for CO 2 insertion and maintaining the ordered structure. Herein, a structure engineering approach is developed to afford an ionic pair-functionalized crystalline and stable fluorinated COF (F-COF) skeleton. The ordered structure of the F-COF is well maintained after the integration of abundant basic fluorinated alcoholate anions, as revealed by synchrotron X-ray scattering experiments. The breakthrough test demonstrates its attractive performance in capturing (400 ppm) CO 2 from gas mixtures via O$-$C bond formation, as indicated by the in situ spectroscopy and operando nuclear magnetic resonance spectroscopy using 13 C-labeled CO 2 sources. Both theoretical and experimental thermodynamic studies reveal the reaction enthalpy of ≈-40 kJ mol -1 between CO 2 and the COF scaffolds. This implies weaker interaction strength compared with state-of-the-art amine-derived sorbents, thus allowing complete CO 2 release with less energy input. The structure evolution study from synchrotron X-ray scattering and small-angle neutron scattering confirms the well-maintained crystalline patterns after CO 2 insertion. In conclusion, the as-developed proof-of-concept approach provides guidance on anchoring binding sites for direct air capture (DAC) of CO 2 in crystalline scaffolds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Co-synthesis of Hydrogen and High-Value Carbon Products from Methane Pyrolysis

The ARPA-E Methane Pyrolysis Project successfully developed a scalable technology for hydrogen production with low-CO x emission through methane pyrolysis, co-producing high-value carbon nanotubes (CNTs). The project focused on optimizing reactor design, enhancing catalyst performance, and assessing techno-economic feasibility to create a commercially viable and environmentally sustainable process. The fluidized bed reactor achieved over 90% methane (CH 4 ) conversion by using a 5% CO 2 co-feed, which stabilizes carbon yields and minimizes catalyst deactivation. This setup allowed for continuous operation across ten cycles, each consisting of a 14-minute pyrolysis phase followed by a 10-minute dislodging phase to remove a fraction of the accumulated carbon, resulting in stable performance and high-quality CNT production. In parallel, monolith reactors coated with Fe demonstrated a sustained methane conversion of 73% while producing CNTs with high crystallinity. Although promising for continuous operation, monolith reactors face challenges in coating durability and scalability, highlighting areas for further optimization in commercial applications. Catalyst formulation played a key role in enhancing process efficiency. The core catalyst used was 5%Fe/Al 2 O 3 (wt%), optimized through wet impregnation, which improved CNT morphology, yielding longer and more uniform CNTs. The catalyst's performance was further enhanced by adding promoters: 2.5 wt% Ni increased methane conversion close to the thermodynamic limit, while 2.5 wt% Mn improved CNT alignment and crystallinity, and 1.5 wt% NaCl boosted CNT morphology but slightly lowered methane conversion. These adjustments allowed the reactor to maintain high methane conversion while producing high-quality CNTs, enabling stable performance over multiple cycles. To address carbon buildup and ensure uninterrupted operation, a pneumatic conveying tube was implemented for effective carbon dislodging in the fluidized bed configuration. CO 2 and H 2 O co-feeds were also introduced to enhance carbon removal, with CO 2 boosting CNT yield by approximately 15%. This setup enabled stable reactor operation across multiple cycles, preventing clogging and minimizing catalyst wear, making the process suitable for industrial scaling. Techno-economic analysis (TEA) projected hydrogen production costs between $\$$1.00 and $\$$1.64 per kilogram, with CNT values assumed at $\$$375/ton and $\$$100/ton. The life cycle assessment showed that CO 2 emissions could be as low as 0.64 kg CO 2 e/kg H 2 at 95% methane conversion assuming an electricity input of 50 kg CO 2 e/MWh. Even at 50% methane conversion, emissions remained below 1 kg CO 2 e/kg H 2 , demonstrating the process's low-emission potential and making it a viable alternative to traditional steam methane reforming. Overall, the results from this project demonstrate the feasibility of a pyrolysis process where carbon is continuously removed from the catalyst surface and hydrogen is continuously produced until a catalyst regeneration step is required to fully clean the catalyst surface and renew catalyst performance. Major open challenges are related to avoiding the loss of catalyst material in the dislodged carbon during fluidized bed conditions, since our best result demonstrated a carbon purity of ~70 wt. % (rest being iron and alumina). A monolith reactor was used to favor dislodgement of carbon compared to fluidized bed conditions but our results do not demonstrate an advantage of the monolith configuration. Catalyst performance was similar to fluidized bed conditions with slower deactivation rates overall, but we could not observe carbon dislodging in any of the tens of experiments that were run at Stanford. Our results show that the most relevant areas of improvement are related to the fundamental understanding of the iron-carbon interface for dislodging, and the development of catalyst that can produce CNTs via a base-growth mechanism such that catalyst is not lost in the dislodgement steps. The final report documents all findings and methodologies in detail, providing a valuable resource for the scientific community. By building on these results, researchers can further advance methane pyrolysis technology, moving toward a more sustainable, scalable pathway for hydrogen production. This work lays the foundation for future research and commercial efforts to reduce emissions in hydrogen production while generating valuable carbon products.

08 HYDROGEN↗
DOE OSTI2026

Oxide-nitride heteroepitaxy for low-loss dielectrics in superconducting quantum circuits

Superconducting qubits show great promise for the realization of fault-tolerant quantum computing, but lossy, amorphous dielectrics limit current technology. Identifying highly crystalline and stoichiometric dielectrics with intrinsically low microwave loss is therefore a central materials challenge, yet experimentally validated platforms remain scarce. In this work, we integrate a crystalline dielectric into a heteroepitaxial TiN/$γ$-Al$_2$O$_3$/TiN trilayer grown via pulsed laser deposition. Correlative high-resolution imaging, diffraction, and spectroscopy measurements confirm the single-crystal quality and chemical integrity of all layers, with minimal defects and limited anion interdiffusion across the oxide-nitride interfaces. Using microwave lumped-element resonators with parallel-plate capacitors, we report the first direct measurement of the dielectric loss of epitaxial $γ$-Al$_2$O$_3$, for which we find a low intrinsic two-level system loss, $δ_{\text{TLS}}^0 = (2.8 \pm 0.1) \times 10^{-5}$. These results establish heteroepitaxial oxides on transition metal nitrides as an attractive materials platform for superconducting quantum circuits, particularly for integration into compact device architectures such as merged-element transmons and microwave kinetic inductance detectors.

Garcia-Wetten, David A. [Northwestern U.]↗
DOE OSTI2023

Subtle Molecular Changes Largely Modulate Chiral Helical Assemblies of Achiral Conjugated Polymers by Tuning Solution-State Aggregation

Understanding the solution-state aggregate structure and the consequent hierarchical assembly of conjugated polymers is crucial for controlling multiscale morphologies during solid thin-film deposition and the resultant electronic properties. However, it remains challenging to comprehend detailed solution aggregate structures of conjugated polymers, let alone their chiral assembly due to the complex aggregation behavior. Herein, we present solution-state aggregate structures and their impact on hierarchical chiral helical assembly using an achiral diketopyrrolopyrrole-quaterthiophene (DPP-T4) copolymer and its two close structural analogues wherein the bithiophene is functionalized with methyl groups (DPP-T2M2) or fluorine atoms (DPP-T2F2). Combining in-depth small-angle X-ray scattering analysis with various microscopic solution imaging techniques, we find distinct aggregate in each DPP solution: (i) semicrystalline 1D fiber aggregates of DPP-T2F2 with a strongly bound internal structure, (ii) semicrystalline 1D fiber aggregates of DPP-T2M2 with a weakly bound internal structure, and (iii) highly crystalline 2D sheet aggregates of DPP-T4. These nanoscopic aggregates develop into lyotropic chiral helical liquid crystal (LC) mesophases at high solution concentrations. Intriguingly, the dimensionality of solution aggregates largely modulates hierarchical chiral helical pitches across nanoscopic to micrometer scales, with the more rigid 2D sheet aggregate of DPP-T4 creating much larger pitch length than the more flexible 1D fiber aggregates. Combining relatively small helical pitch with long-range order, the striped twist-bent mesophase of DPP-T2F2 composed of highly ordered, more rigid 1D fiber aggregate exhibits an anisotropic dissymmetry factor (g-factor) as high as 0.09. This study can be a prominent addition to our knowledge on a solution-state hierarchical assembly of conjugated polymers and, in particular, chiral helical assembly of achiral organic semiconductors that can catalyze an emerging field of chiral (opto)electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Oxidation Behavior and Property Degradation of Nuclear Graphites

During its multidecade operation in the core of nuclear reactors, graphite components are subjected to aggressive and continuous exposure to a high field of ionizing and neutron irradiation, high temperature, and various types of present and postulated chemical attacks. High density, high crystallinity polygranular synthetic graphite is unique among other materials for its extraordinary capacity of resisting and adapting to the aggression inflicted by high temperature, high energy neutron bombardment and ionizing gamma radiation. But, as a carbonaceous material, even though of very high purity, graphite is reactive towards common oxidizing agents: oxygen, carbon dioxide, water. Safe operation of HTGRs relies, among other aspects, on engineered safeguard systems for efficient and continuous protection of graphite components against oxidation. Graphite oxidation behavior was, and continues to be, an important direction of theoretical and experimental research, engineering analyses, models and simulations, and design and safety regulations. The avalanche of publications, reports, experimental data, computer codes, and regulatory documents related to oxidation behavior of nuclear graphite is now accelerating to new levels, prompted by the increased interest for nuclear energy as a clean, carbon-free energy source. Even though public’s perception of nuclear energy advantages may still be influenced by the memories of past accidents of nuclear reactors from generations II and III, the community of informed scientists and engineers, regulators and statemen knows that generation IV of nuclear reactors is designed at very high safety standards, doubled by great advances of scientific knowledge and technological progress. One of routes of these recent advances is directed at better understanding of graphite oxidation behavior, its relationship with graphite manufacturing and microstructural properties, along with the effects of various environmental factors and process variables. Together, the recent progress in manufacturing, properties characterization, and modeling of intricated physical and chemical processes that concur to the oxidation behavior led to development of powerful simulation codes able to analyze various scenarios of normal operation and hypothetical off-normal events, and thus to clearly specify the allowable parameters envelopes for the designers, constructors, and operators of current and future modular HTGRs. This review begins with an introduction on manufacturing methods, structure, and properties of nuclear graphite, including basic requirements that this specialty graphite type must satisfy for nuclear use. It continues with a chapter on environmental effects on nuclear graphite, where emphasis is placed less on irradiation and much more on oxidation phenomena, their safety implications, and the basic traits of chronic and acute oxidation by air (oxygen) and water (humidity, steam). Particular attention is placed on the three graphite grades of interest for this document (IG-110, NBG-18, PCEA). A chapter on properties degradation induced by oxidation follows, with focus on density, dimensional, and mechanical properties changes. The next chapter is intended as a brief review of various approaches used for modeling of graphite oxidation behavior. It summarizes the progress of oxidation models, from the early attempts to complex computational approaches interfaced with specialized computer codes designed for nuclear reactor simulations. Last, a list is presented of knowledge gaps where more research is needed. A short summary concludes the review.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tailorable Cellulose II Nanocrystals (CNC II) Prepared in Mildly Acidic Lithium Bromide Trihydrate (MALBTH)

Preparing cellulose II nanocrystals (CNC II) requires a polymorph transformation of natural cellulose I feedstocks. The transformation is usually achieved via a process such as mercerization or dissolution–regeneration. This study demonstrated a new method to prepare CNC II directly from bleached kraft pulp (BKP, a commercially available cellulose I feedstock) in a mildly acidic lithium bromide trihydrate (MALBTH) system, a concentrated (~61 wt%) solution of LiBr in water with a very low concentration (2.5 mM) of sulfuric acid. First, the BKP was treated in the MALBTH system to generate a cellulose II hydrolysis solid residue (CHR) with a yield of 64–86%, during which the selective hydrolysis of disordered cellulose and the polymorph transformation were completed simultaneously. Then, subsequent oxidation of the CHR by ammonium persulfate (APS, 0.1–0.6 M) resulted in the CNC II with high yield (up to 62%), high crystallinity (over 90%), rich surface carboxyl group (0.3–1.2 mmol g-1 cellulose), excellent colloidal stability (up to -59 mV zeta potential), and high thermal stability. The CNC II had a tunable length (26–57 nm), determined by the conditions of the MALBTH hydrolysis and the APS oxidation, but similar lateral dimension (8–10 nm). The characterization of the CHR by wide-angle X-ray diffraction and Fourier transform infrared spectroscopy verified the polymorphic transformation from cellulose I to II during the MALBTH treatment. The swelling of the BKP in the MALBTH enabled cellulose crystallites to slide and reassemble, which completed the rearrangement of cellulose chains from parallel to anti-parallel conformation (polymorph transformation from cellulose I to II). This study provided an efficient and green method to produce cellulose II nanocrystals with controllable aspect ratios via the simultaneous hydrolysis and polymorph transformation of cellulose I feedstocks.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗