Search NASA⌕ Search

SEARCH · Search NASA

Results for “high-temperature electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

The NATA code: Theory and analysis, volume 1

A computer program for calculating quasi-one-dimensional gas flow in axisymmetric and two-dimensional nozzles and rectangular channels is presented. Flow is assumed to start from a state of thermochemical equilibrium at a high temperature in an upstream reservoir. The program provides solutions based on frozen chemistry, chemical equilibrium, and nonequilibrium flow with finite reaction rates. Electronic nonequilibrium effects can be included using a two-temperature model. An approximate laminar boundary layer calculation is given for the shear and heat flux on the nozzle wall. Boundary layer displacement effects on the inviscid flow are considered also. Chemical equilibrium and transport property calculations are provided by subroutines. The code contains precoded thermochemical, chemical kinetic, and transport cross section data for high-temperature air, CO2-N2-Ar mixtures, helium, and argon. It provides calculations of the stagnation conditions on axisymmetric or two-dimensional models, and of the conditions on the flat surface of a blunt wedge. The primary purpose of the code is to describe the flow conditions and test conditions in electric arc heated wind tunnels.

Bade, W. L.↗
NASA NTRS1975

A review of chromium, molybdenum, and tungsten alloys

The mechanical properties of chromium, molybdenum, and tungsten alloys are reviewed with particular emphasis on high-temperature strength and low-temperature ductility. Precipitate strengthening is highly effective at 0.4 to 0.8 times the melting temperature in these metals, with HfC being most effective in tungsten and molybdenum, and Ta(B,C) most effective in chromium. Low-temperature ductility can be improved by alloying to promote rhenium ductilizing or solution softening. The low-temperature mechanical properties of these alloys appear related to electronic interactions rather than to the usual metallurgical considerations.

Klopp, W. D.↗
NASA NTRS1975

An upper limit on interstellar C IV in the spectrum of gamma-2 Velorum

An upper limit on the column density of C IV along the line of sight to gamma-2 Vel is derived from upper limits placed on the equivalent widths of the interstellar C IV doublet with rest wavelengths at 1548.20 A and 1550.77 A. A lower limit of 250,000 K is calculated for the electron temperature of O VI emitting regions by combining the C IV results with a measurement of the column density of interstellar O VI for the same star and using calculations for the relative ionization of some abundant elements as a function of electron temperature in a low-density plasma. Since gamma-2 Vel is in the central part of the Gum Nebula, the high temperature suggested by these results is shown to support the idea that a high-temperature phase of the interstellar medium, possibly maintained by supernova explosions, may exist.-

Lengyel-Frey, D.↗
NASA NTRS1976

Iron line emission from a high-temperature plasma in Cassiopeia A

The letter reports a measurement of the X-ray spectrum of Cas A with a proportional counter on board OSO-8. The high-energy data (greater than 7 keV) are found to agree equally well with a power law having a number index of about 4.5 and with a thermal spectrum having kT of about 3.9 keV. A narrow iron line predicted by the thermal model is also observed; this line is centered at about 6.67 keV and has an equivalent width of approximately 1270 eV. The low-energy data (below 6 keV) are not fully accounted for by the above thermal spectrum, but are fitted well by an additional low-temperature thermal component with kT not exceeding 0.7 keV and an atomic hydrogen column density of approximately 10 to the 22nd power per sq cm. The iron abundance in the plasma at an electron temperature of 40 keV is estimated from the observed line-to-continuum ratio, and it is shown that a normal cosmic iron abundance is adequate to explain the observation.

Pravdo, S. H.↗
NASA NTRS1977

A high-temperature wideband pressure transducer

A condenser microphone AM carrier system, which has been developed to measure pressure fluctuations at elevated temperatures, consists of the following components: a condenser microphone designed for operation at elevated temperatures; existing carrier electronics developed under two previous research grants but adapted to meet present requirements; a 6 m cable operating as a half-wavelength transmission line between the microphone and carrier electronics; and a voltage-controlled oscillator used in a feedback loop for automatic tuning control. Both theoretical and practical aspects of the development program are considered. The three predominant effects of temperature changes are changes in the membrane-backplate gap, membrane tension, and air viscosity. The microphone is designed so that changes in gap and membrane tension tend to have compensating effects upon the microphone sensitivity.

Zuckerwar, A. J.↗
NASA NTRS1977

Is the common definition of the Mie-Grueneisen equation of state inconsistent

Anharmonic models are used to describe the high temperatures and the electronic effects characteristic of shock wave phenomena and planetary interiors. It is found that a generalized Grueneisen function dependent on temperature and volume is necessary for the self-consistent application of the Mie-Grueneisen equation at the physical conditions encountered in shock wave phenomena or in the interior of planets. It is noted that at temperatures of a few thousand degrees Kelvin, by deriving the function in terms of anharmonic lattice dynamics, the difference between gamma and gamma(th) is of the same order of a magnitude as gamma. This leads to the conclusions that (1) gamma is not a function of temperature and (2) gamma?gamma(th) does not explain either the equation of state of planetary interiors or high-temperature shock wave phenomena.

Mulargia, F.↗
NASA NTRS1977

Multiple loop activations and continuous energy release in the solar flare of June 15, 1973

The spatial and temporal evolution of the high-temperature plasma in the solar flare of June 15, 1973, is studied using XUV spectroheliograms and X-ray filtergrams obtained from Skylab. The analysis focuses on the changing forms and brightness of Fe XXIII 263-A and Fe XXIV 255-A images. Temperatures and emission measures computed for different times during the flare are compared with those derived from Solrad-9 flux data, the electron temperature in the bright compact core of the Fe XXIV image is determined, and a coronal origin is suggested for this bright core. The observational evidence shows that the overall flare event involved a number of different preexisting loops and arches which were activated in succession. The activation and heating are found to have persisted well past the end of the burst phase, implying that the energy release did not end when the impulsive phase was over. The overall development of the flare is summarized on the basis of the observed order of appearance of the loops.

Widing, K. G.↗
NASA NTRS1978

Helium /3/ rich solar flares

Several aspects of a solar flare model that emphasizes evidence for the formation of current filaments as mechanisms of field dissipation are discussed. The origin of flare magnetic fields is considered, along with the thermal distribution, electron density, and high-energy X ray emission of flares. It is suggested that the extreme He-3 enrichment in some solar flares is due to spallation and the subsequent confinement of spallation products in a high-temperature high-density plasma associated with the magnetic instability that produces the flare. A current filament is assumed to produce the spallation and maintain the temperature that yields the high-energy X-ray spectrum and depletes the isotopes D, Li, Be, and B, as observed.

Colgate, S. A.↗
NASA NTRS1980

Thermal bremsstrahlung from high-temperature plasmas

Analytic expressions are derived for the total bremsstrahlung energy-loss rate per unit volume and the spectral emission rate of a very hot (10 million K to 1 billion K) plasma. At these temperatures the principal contribution to emission can be computed from the nonrelativistic limit of electron-ion bremsstrahlung in the Born approximation. Modifications to this rate are evaluated from (1) relativistic corrections to the thermal-electron velocity distribution function, (2) relativistic and spin corrections to the nonrelativistic electron-ion bremsstrahlung cross section, (3) electron-electron bremsstrahlung, and (4) first-order Born approximation corrections to electron-ion bremsstrahlung.

Gould, R. J.↗
NASA NTRS1981

Amorphous metallizations for high-temperature semiconductor device applications

The initial results of work on a class of semiconductor metallizations which appear to hold promise as primary metallizations and diffusion barriers for high temperature device applications are presented. These metallizations consist of sputter-deposited films of high T sub g amorphous-metal alloys which (primarily because of the absence of grain boundaries) exhibit exceptionally good corrosion-resistance and low diffusion coefficients. Amorphous films of the alloys Ni-Nb, Ni-Mo, W-Si, and Mo-Si were deposited on Si, GaAs, GaP, and various insulating substrates. The films adhere extremely well to the substrates and remain amorphous during thermal cycling to at least 500 C. Rutherford backscattering and Auger electron spectroscopy measurements indicate atomic diffussivities in the 10 to the -19th power sq cm/S range at 450 C.

Wiley, J. D.↗
NASA NTRS1981

High-temperature Complementary Metal Oxide Semiconductors (CMOS)

The results of an investigation into the possibility of using complementary metal oxide semiconductor (CMOS) technology for high temperature electronics are presented. A CMOS test chip was specifically developed as the test bed. This test chip incorporates CMOS transistors that have no gate protection diodes; these diodes are the major cause of leakage in commercial devices.

Mcbrayer, J. D.↗
NASA NTRS1982

Small area silicon diffused junction X-ray detectors

The low-temperature performance of silicon diffused junction detectors in the measurement of low energy X-rays is reported. The detectors have an area of 0.04 sq cm and a thickness of 100 microns. The spectral resolutions of these detectors were found to be in close agreement with expected values, indicating that the defects introduced by the high-temperature processing required in the device fabrication were not deleteriously affecting the detection of low-energy X-rays. Device performance over a temperature range of 77 K to 150 K is given. These detectors were designed to detect low-energy X-rays in the presence of minimum ionizing electrons. The successful application of silicon-diffused junction technology to X-ray detector fabrication may facilitate the development of other novel silicon X-ray detector designs.

Walton, J. T.↗
NASA NTRS1983

Dielectronic recombination rates, ionization equilibrium, and radiative emission rates for Mn ions in low-density high-temperature plasmas

The analysis of optically-thin far-ultraviolet and X-ray emission lines of multiply-charged ions is one of the basic methods for determining the temperatures and densities of laboratory and astrophysical plasmas. In addition, the energy balance in these plasmas can be significantly influenced by the emission of radiation from relatively low concentrations of multiple-charged atomic ions. Because the populations of the excited levels are expected to depart substantially from their local thermodynamic equilibrium values a detailed treatment of the elementary collisional and radiative processes must be employed in order to predict the emission line intensities. In this investigation the authors present the results of calculations based on a corona equilibrium model in which a detailed evaluation is made of the dielectronic recombination rate coefficients. The ionization and autoionization following inner-shell electron excitation from each ground state are balanced by direct radiative and dielectronic recombination. The spectral line intensities emitted by the low-lying excited states, which are assumed to undergo spontaneous radiative decay in times that are short compared with the collision time, are evaluated in terms of the corona ionization equilibrium distributions of the ground states and their electron-impact excitation states.

Jacobs, V. L.↗
NASA NTRS1983

Thermal and electrical interaction of tantalum with a low temperature chemically active plasma flow

The paper deals with an experimental study of radiative heat transfer and charge transfer processes from the surface of tantalum plates under conditions of unsteady high-temperature heating and oxidation. It is shown that at plate temperatures of 1800 K, the heat flux may be as high as 400 kW/sq m. Heating is shown to stimulate the emissivity of tantalum and the temperature of the free electrons which surface, through a gas boundary layer, from the plasma onto the metal.

Zake, M. V.↗
NASA NTRS1984

High-temperature erosion of plasma-sprayed, yttria-stabilized zirconia in a simulated turbine environment

A series of rig calibration and high temperature tests simulating gas path seal erosion in turbine engines were performed at three impingement angles and at three downstream locations. Plasma sprayed, yttria stablized zirconia specimens were tested. Steady state erosion curves presented for 19 test specimens indicate a brittle type of material erosion despite scanning electron microscopy evidence of plastic deformation. Steady state erosion results were not sensitive to downstream location but were sensitive to impingement angle. At difference downstream locations specimen surface temperature varied from 1250 to 1600 C (2280 to 2900 F) and particle velocity varied from 260 to 320 m/s (850 to 1050 ft/s). The mass ratio of combustion products to erosive grit material was typically 240.

Hanschuh, R. F.↗
NASA NTRS1984

High-temperature thermoelectric energy conversion. II - Materials survey

The current status of materials research for high-temperature thermoelectric energy conversion is reviewed. Two general classes of materials show promise for high temperature figure of merit (Z) values, viz, the rare-earth chalcogenides and the boron-rich borides. The electronic transport properties of the rare-earth chalcogenides are explicable on the basis of degenerate or partially degenerate n-type semiconductors. Boron and boron-rich borides exhibit p-type hopping conductivity, with detailed explanations proposed for the transport differing from compound to compound. Some discussion is presented on the reasons for the low thermal conductivities in these materials. Also, ZTs greater than one appear to have been realized at high temperature in many of these compounds.

Wood, C.↗
NASA NTRS1958

X-15 conditioning and pressurization system

The cooling system for the X-15 airplane incorporates insulation partial protection against high-temperature effects plus liquid and gaseous nitrogen to control specifically environmental and equipment temperatures. Electronic-equipment cooling represents the largest load; however, other items to be considered are the pressure-suit ventilation, aerodynamic-heating effects, sensor-head cooling, and windshield antifogging. A review of various types of cooling systems indicates that an expendable, stored, cooling system is the most efficient for short-duration missions. This paper presents a description including a simplified schematic diagram of the subject system. (author)

Bouman, C P↗
NASA NTRS2005

Characterization of Ternary NiTiPt High-Temperature Shape Memory Alloys

Pt additions substituted for Ni in NiTi alloys are known to increase the transformation temperature of the alloy but only at fairly high Pt levels. However, until now only ternary compositions with a very specific stoichiometry, Ni50-xPtxTi50, have been investigated and then only to very limited extent. In order to learn about this potential high-temperature shape memory alloy system, a series of over twenty alloys along and on either side of a line of constant stoichiometry between NiTi and TiPt were arc melted, homogenized, and characterized in terms of their microstructure, transformation temperatures, and hardness. The resulting microstructures were examined by scanning electron microscopy and the phase compositions quantified by energy dispersive spectroscopy."Stoichiometric" compositions along a line of constant stoichiometry between NiTi to TiPt were essentially single phase but by any deviations from a stoichiometry of (Ni,Pt)50Ti50 resulted in the presence of at least two different intermetallic phases, depending on the overall composition of the alloy. Essentially all alloys, whether single or two-phase, still under went a martensitic transformation. It was found that the transformation temperatures were depressed with initial Pt additions but at levels greater than 10 at.% the transformation temperature increased linearly with Pt content. Also, the transformation temperatures were relatively insensitive to alloy stoichiometry within the range of alloys examined. Finally, the dependence of hardness on Pt content for a series of Ni50-xPtxTi50 alloys showed solution softening at low Pt levels, while hardening was observed in ternary alloys containing more than about 10 at.% Pt. On either side of these "stoichiometric" compositions, hardness was also found to increase significantly.

Rios, Orlando↗