Search NASA⌕ Search

SEARCH · Search NASA

Results for “hull structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

EV30: Structural Design and Analysis Division

EV30 provides support to customers with structural design, analysis, and definition of induced environments. These disciplines are responsible for assuring the structural integrity of spacecraft and launch vehicle primary structures, subsystems, mechanisms, and components to ensure designs for this hardware meet structural requirements and performance goals.

Patrick V Hull↗

A study of design trade (OFFS) using a computer model

The interaction between the efficiency of the structural design and the cost of the structure used was studied. It is shown that future effort is best directed at producing a low cost structure of medium efficiency, but with the ability to withstand normal service wear. The trade-off between aerodynamic drag and structure weight in selecting a length to diameter ratio for the hull is evaluated along with the implications of power plan type and fuel cost on the economics of the airship. The choice of lifting gas is considered.

Coughlin, S.↗

Predicting the Reliability of Solar-Cell Interconnections

The reduction of life expectancy by thermal cycling calculated during design. Connections between solar cells critical parts of solarcell arrays generating electric power. Reliability affects life expectancy of modules, panels, and arrays. Used to predict stress-cycle lifetimes of such structures as arches, walkways, cylindrical ribbing of aircraft fuselages and submarine hulls, and pipeline expansion loops. Testing costs reduced by about 90 percent.

Mon, G. R.↗

Disposing of waste package with respect to physico-chemical characteristics - 15041

The waste inventory to be taken into account for the design of the Cigeo project is defined in the industrial program for waste management established in cooperation between nuclear operators (EDF, AREVA, CEA) and Andra. This waste inventory has been constituted with a list of different families of radioactive waste packages from High Level Waste (HLW) to Intermediate Level Long-lived Waste (IL-LLW). IL-LLW include a large variety of items such as structural elements from fuel assemblies (cladding from the fuel rods called 'hulls', end pieces called 'end caps' and assembly spacer grids, etc.), sludge from effluent treatment or miscellaneous equipment (filters, pumps, etc.). Most ILLW (except solidified sludges) are basically metallic but organic and inorganic components such as plastics (cellulose, PVC...) and salts may also be included. The rules used for designing Cigeo are based on the separation of waste having different physico-chemical characteristics in different cells. However it could be possible to dispose of waste packages with different physico-chemical characteristics in the same cell if we can demonstrate that a type of waste does not generate significant physico-chemical perturbations on other co-stored families. The first step of our analysis has been the identification of categories of materials present in waste likely to interact with each other. The second step consisted in analysing qualitatively the physico-chemical interactions between these materials. In the third step, we defined criteria allowing evaluation of the consequences of these interactions on (i) gas production (mainly H{sub 2}), (ii) radionuclide release and transfer and (iii) degradation of concrete components of the disposal cell. We built then a table allowing qualitative comparison of the consequences of the interactions between the materials types defined in the first step. The conclusion of this study shows that it is necessary to pay a very careful attention before disposing of waste packages containing organic components nearby waste packages containing actinides radionuclides. The geochemical phenomena coupling must also be quantitatively evaluated so as to analyse possible interaction processes between the released organic compounds and the cementitious components of the cells, the near-field clay-stone and the radionuclides migration. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Aeroelastic effects in multi-rotor vehicles with application to a hybrid heavy lift system. Part 1: Formulation of equations of motion

This report presents a set of governing coupled differential equations for a model of a hybrid aircraft. The model consists of multiple rotor systems connected by an elastic interconnecting structure, with options to add any combination of or all of the following components; i.e., thrusters, a buoyant hull, and an underslung weight. The dynamic equations are written for the individual blade with hub motions, for the rigid body motions of the whole model, and also for the flexible modes of the interconnecting structure. One of the purposes of this study is to serve as the basis of a numerical study aimed at determining the aeroelastic stability and structural response characteristics of a Hybrid Heavy Lift Airship (HHLA). It is also expected that the formulation may be applicable to analyzing stability and responses of dual rotor helicopters such as a Heavy Lift Helicopter (HLH). Futhermore, the model is capable of representing coupled rotor/body aeromechanical problems of single rotor helicopters.

Venkatesan, C.↗

Theoretical search for possible Li–Ni–B crystal structures using an adaptive genetic algorithm

The structural diversity of rare-earth and transition metal borides indicates that alkali-transition metal borides (A-T-B) show tremendous promise in exhibiting a variety of crystal structures with different dimensionalities of T-B frameworks. On the other hand, the A-T-B ternary systems are severely underexplored because of the synthetic challenges associated with their preparation. Accurate and efficient computational predictions of low-energy stable and metastable phases can identify the optimal compositions of the hypothetical compounds in the A-T-B systems to guide the synthesis. As such, in this work, we have computationally discovered several new phases in the Li–Ni–B ternary system. The newly discovered LiNiB, Li 2 Ni 3 B, and Li 2 NiB phases expand the existing theoretical database, and the convex-hull surface of Li–Ni–B has been re-constructed. The lowest energy structure of the LiNiB compound has been found by an adaptive genetic algorithm with layered motif, which matches with the experimentally determined structure. According to our electrochemical calculations, LiNiB and another predicted layered Li 2 NiB compounds have great potential as anode materials for lithium batteries. The Li 2 Ni 3 B compound with the space group P4 3 32 was predicted to crystallize in a cubic structure composed of distorted octahedral units of BNi 6 , which is isostructural to two noncentrosymmetric superconductors Li 2 Pd 3 B and Li 2 Pt 3 B. While we were unable to experimentally confirm the Li 2 Ni 3 B compound utilizing the hydride synthetic route, attempts to synthesize this compound by alternate methods remain highly desirable, considering its potential superconducting properties.

36 MATERIALS SCIENCE↗

The Li–F–H ternary system at high pressures

Evolutionary crystal structure prediction searches have been employed to explore the ternary Li-F-H system at 300 GPa. Metastable phases were uncovered within the static lattice approximation, with LiF 3 H 2 , LiF 2 H, Li 3 F 4 H, LiF 4 H 4 , Li 2 F 3 H and LiF 3 H lying within 50 meV/atom of the 0 K convex hull. All of these phases contain H n F¯ n+1 (n = 1; 2) anions, and Li + cations. Other structural motifs such as LiF slabs, $H$ $^{+}_{3}$ molecules and F δ- ions are present in some of the low enthalpy Li-F-H structures. The bonding within the H n F¯ n+1 molecules, which may be bent or linear, symmetric or asymmetric, is analyzed. The five phases closest to the hull are insulators, while LiF 3 H is metallic and predicted to have a vanishingly small superconducting critical temperature. Li 3 F 4 H is predicted to be stable at zero pressure. Furthermore, this study lays the foundation for future investigations of the role of temperature and anharmonicity on the stability and properties of compounds and alloys in the Li-F-H ternary system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Data mining the missing ordered phases of Li/Na metal oxides

Data-driven discovery of Li-ion and Na-ion battery materials has been pioneered by generic materials data platforms such as the Materials Project. After decades of progress, it is timely to ask whether there remain underexplored compositional spaces. Here, in this work, we present a systematic data-mining effort to uncover missing ordered binary, ternary and quaternary Li/Na-containing metal oxides using high-throughput density functional theory (DFT). Building on 19,120 stable and metastable oxides entries from the Materials Project, we performed 13,245 additional calculations through isovalent substitutions of known ground states, experimentally reported compounds, and specific prototype structures. Our study identifies 36 new ground states within the GGA/GGA + U convex hull and 45 within the r 2 SCAN convex hull. Additionally, we identified 840 metastable compounds from GGA/GGA + U and 979 from r 2 SCAN that are absent in the present Materials Project databases. Moreover, we have tripled the metastable materials in compositional spaces with a molar ratio of cation/anion >1, highlighting the overlooked opportunities in this compositional space.

25 ENERGY STORAGE↗

Fielding An Amphibious UAV: Development, Results, and Lessons Learned

This report summarizes the work completed on the design and flight-testing of a small, unmanned, amphibious demonstrator aircraft that flies autonomously. The aircraft named ACAT (Autonomous Cargo Amphibious Transport) is intended to be a large cargo carrying unmanned aircraft that operates from water to avoid airspace and airfield conflict issues between manned and unmanned aircraft. To demonstrate the feasibility of this concept, a demonstrator ACAT was designed, built, and flown that has a six-foot wingspan and can fly autonomously from land or water airfield. The demonstrator was designed for a 1-hour duration and 1-mile telemetry range. A sizing code was used to design the smallest demonstrator UAV to achieve these goals. The final design was a six-foot wingspan, twin hull configuration that distributes the cargo weight across the span, reducing the wing structural weight. The demonstrator airframe was constructed from balsa wood, fiberglass, and plywood. A 4-stroke model airplane engine powered by methanol fuel was mounted in a pylon above the wing and powers the ACAT UAV. Initial flight tests from land and water were conducted under manual radio control and confirmed the amphibious capability of the design. Flight avionics that were developed by MLB for production UAVs were installed in the ACAT demonstrator. The flight software was also enhanced to permit autonomous takeoff and landing from water. A complete autonomous flight from ahard runway was successfully completed on July 5, 2001 and consisted of a take-off, rectangular flight pattern, and landing under complete computer control. A completely autonomous flight that featured a water takeoff and landing was completed on October 4, 2001. This report describes these activities in detail and highlights the challenges encountered and solved during the development of the ACAT demonstrator. hard runway was successfully completed on July 5, 2001 and consisted of a take-off, rectangular flight pattern, and landing under complete computer control. A completely autonomous flight that featured a water takeoff and landing was completed on October 4, 2001. This report describes these activities in detail and highlights the challenges encountered and solved during the development of the ACAT demonstrator.

Pisanich, Greg↗

A review of lighter-than-air progress in the United States and its technological significance

Lighter-than-air craft for transportation and communications systems are discussed, with attention given to tethered balloons used to provide stable platforms for airborne surveillance equipment, freight-carrying balloons, manned scientific research balloons such as Atmosat, high-altitude superpressure aerostats employed in satellite communications systems, airport feeder airships, and naval surveillance airships. In addition, technical problems associated with the development of advanced aerostats, including the aerodynamics of hybrid combinations of large rotor systems and aerostat hulls, the application of composites to balloon shells, computer analyses of the complex geometrical structures of aerostats and propulsion systems for airships, are considered.

Mayer, N. J.↗

Data reduction using cubic rational B-splines

A geometric method is proposed for fitting rational cubic B-spline curves to data that represent smooth curves including intersection or silhouette lines. The algorithm is based on the convex hull and the variation diminishing properties of Bezier/B-spline curves. The algorithm has the following structure: it tries to fit one Bezier segment to the entire data set and if it is impossible it subdivides the data set and reconsiders the subset. After accepting the subset the algorithm tries to find the longest run of points within a tolerance and then approximates this set with a Bezier cubic segment. The algorithm uses this procedure repeatedly to the rest of the data points until all points are fitted. It is concluded that the algorithm delivers fitting curves which approximate the data with high accuracy even in cases with large tolerances.

Chou, Jin J.↗

Candidate Inorganic Photovoltaic Materials from Electronic Structure-Based Optical Absorption and Charge Transport Proxies

Approximately 33,000 valence-precise, ordered inorganic compounds tabulated in the Inorganic Crystal Structure Database have been screened for their potential as photovoltaic (PV) absorbers. This has been accomplished through the use of proxies for charge carrier mobilities and optical absorption properties from electronic structure calculations, in addition to constraints on thermodynamic stability. Preliminary screening of computed properties tabulated in the Materials Project Database, with subsequent high(er)-fidelity electronic structure calculations of optical properties and band gap corrections, indicates ≈200 known compounds on or near the convex hull which exhibit spectroscopic limited maximum efficiency (SLME) in excess of 25% for a 500 nm thin film, in addition to possessing low effective masses for both electrons and holes. Among the predicted high performers are nearly all the typical commercial inorganic thin-film PV materials and several previously unexplored candidates. The new candidates are drawn from a diverse set of chemical and structural families, including many chalcogenides and pnictides as well as antiperovskites, skutterudites, and semiconducting intermetallics. Here, carrier effective masses, SLME, corrected band gaps, and other relevant information for ≈800 compounds are made available for further analyses via the Materials Project MPContribs Framework.

14 SOLAR ENERGY↗

Structural Optimization (Final Technical Report V.2.0)

The overall Project (Project) objective is to materially decrease the leveled cost of energy (LCOE) of the Columbia Power (CPwr) StingRAY utility-scale wave energy converter (WEC). This will be achieved by reducing structural material and manufacturing costs and increasing energy output. In this Project, improving the overall Power-to-Weight ratio (PWR) is accomplished through lowering design margins - allowing for weight reduction and more efficient, cost-effective WEC manufacturing and assembly - and by optimizing mass-related WEC performance parameters, such as center of gravity and system inertia. A mixed materials approach to further structural optimization was developed under this Project and validated with extensive laboratory structural testing. This approach substitutes fiber-reinforced plastic (FRP) for steel where appropriate. The benefits of steel are maintained where most useful, for instance at structural joints where the stiffness of steel is required, and the complex geometry is more readily fabricated with steel. However, there are structural spans whose simple shapes are readily fabricated with mandrel-wound FRP and where significant cost and weight savings can be found. An adhesive, double lap shear joint is used to join the FRP and steel subcomponents.

16 TIDAL AND WAVE POWER↗

Worst case estimation of homology design by convex analysis

The methodology of homology design is investigated for optimum design of advanced structures. for which the achievement of delicate tasks by the aid of active control system is demanded. The proposed formulation of homology design, based on the finite element sensitivity analysis, necessarily requires the specification of external loadings. The formulation to evaluate the worst case for homology design caused by uncertain fluctuation of loadings is presented by means of the convex model of uncertainty, in which uncertainty variables are assigned to discretized nodal forces and are confined within a conceivable convex hull given as a hyperellipse. The worst case of the distortion from objective homologous deformation is estimated by the Lagrange multiplier method searching the point to maximize the error index on the boundary of the convex hull. The validity of the proposed method is demonstrated in a numerical example using the eleven-bar truss structure.

Yoshikawa, N.↗

Crystal structure, energetics, and phase stability of strengthening precipitates in Mg alloys: A first-principles study

Magnesium alloys have attracted increasing interest due to their potential use as light-weight structural materials but their application is limited by their low strength compared to conventional alloys. Age hardening is commonly employed to form strengthening precipitates in such alloys, which impedes the motion of dislocations, and leads to improved strength. However, the exact composition, crystal structure, and energetics of many of these strengthening precipitates are either unknown or not clearly resolved, making the precise engineering and design of such alloys difficult. Toward this end, we use first-principles density functional theory calculations to elucidate the crystal structures and energetics of a very large set of precipitates in magnesium alloys. For cases where the precipitate crystal structure is not known, we comprehensively search over decorations of many prototype structures, including hcp superstructures, and in addition, perform global structural optimization using the Minima Hopping Method to predict suitable crystal structures. For all the strengthening precipitates, we calculate the formation energies, construct the respective zero temperature convex hulls, and analyze their stabilities. Here, we show that the bulk formation energies per solute atom (essentially, the solute chemical potentials) decrease along the observed sequences of precipitation, validating our calculations in Mg-{Nd, Gd, Y, Y-Nd, Nd-Zn, Gd-Zn, Y-Zn, Al, Zn, Sn, Al-Ca, Ca-Zn} alloy systems. In addition, we construct a monolayer model for the Guinier-Preston zones (GP zones) observed in the Mg-Nd-Zn system during early stages of age hardening, and thereby explain the formation of the γ" (Mg 5 (Nd,Zn)) phase from the GP zones, as observed in experiments.

36 MATERIALS SCIENCE↗

Search for Stable and Low-Energy Ce–Co–Cu Ternary Compounds Using Machine Learning

Cerium-based intermetallics have garnered significant research attention as potential new permanent magnets. In this study, we explore the compositional and structural landscape of Ce−Co−Cu ternary compounds using a machine learning (ML)- guided framework integrated with first-principles calculations. We employ a crystal graph convolutional neural network (CGCNN), which enables efficient screening for promising candidates, significantly accelerating the material discovery process. With this approach, we predict five stable compounds, Ce 3 Co 3 Cu, CeCoCu 2 , Ce 12 Co 7 Cu, Ce 11 Co 9 Cu, and Ce 10 Co 11 Cu 4 , with formation energies below the convex hull, along with hundreds of low-energy (possibly metastable) Ce−Co−Cu ternary compounds. Firstprinciples calculations reveal that several structures are both energetically and dynamically stable. Notably, two Co-rich low-energy compounds, Ce 4 Co 33 Cu and Ce 4 Co 31 Cu 3 , are predicted to have high magnetizations.

Chemical structure↗

Ultrafast Yttrium Hydride Chemistry at High Pressures via Non-equilibrium States Induced by an X-ray Free Electron Laser

Controlling the formation and stoichiometric content of the desired phases of materials has become of central interest for a variety of fields. The possibility of accessing metastable states by initiating reactions by X-ray-triggered mechanisms over ultrashort time scales has been enabled by the development of X-ray free electron lasers (XFELs). Utilizing the exceptionally high-brilliance X-ray pulses from the EuXFEL, we report the synthesis of a previously unobserved yttrium hydride under high pressure, along with nonstoichiometric changes in hydrogen content as probed at a repetition rate of 4.5 MHz using time-resolved X-ray diffraction. Furthermore, exploiting non-equilibrium pathways, we synthesize and characterize a hydride in a Weaire–Phelan structure type at pressures as low as 125 GPa, predicted using a crystal structure search, with a hydrogen content of 4.0–5.75 hydrogens per cation, that is enthalpically metastable on the convex hull.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine Learning-Guided Discovery of Ternary Compounds Containing La, P, and Group 14 Elements

In this work, we integrate a deep machine learning (ML) method with first-principles calculations to efficiently search for the energetically favorable ternary compounds. Using La–Si–P as a prototype system, we demonstrate that ML-guided first-principles calculations can efficiently explore crystal structures and their relative energetic stabilities, thus greatly accelerate the pace of material discovery. A number of new La–Si–P ternary compounds with formation energies less than 30 meV/atom above the known ternary convex hull are discovered. Among them, the formation energies of La 5 SiP 3 and La 2 SiP phases are only 2 and 10 meV/atom, respectively, above the convex hull. These two compounds are dynamically stable with no imaginary phonon modes. Moreover, by replacing Si with heavier-group 14 elements in the eight lowest-energy La–Si–P structures from our ML-guided predictions, a number of low-energy La–X–P phases (X = Ge, Sn, Pb) are predicted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗