Search NASA⌕ Search

SEARCH · Search NASA

Results for “humidity measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Optical Breath Gas Extravehicular Activity Sensor for the Advanced Portable Life Support System

The function of the infrared gas transducer used during extravehicular activity (EVA) in the current space suit is to measure and report the concentration of carbon dioxide (CO2) in the ventilation loop. The next generation portable life support system (PLSS) requires highly accurate CO2 sensing technology with performance beyond that presently in use on the International Space Station extravehicular mobility unit (EMU). Further, that accuracy needs to be provided over the full operating pressure range of the suit (3 to 25 psia). Accommodation within space suits demands that optical sensors meet stringent size, weight, and power requirements. A laser diode (LD) sensor based on infrared absorption spectroscopy is being developed for this purpose by Vista Photonics, Inc. Version 1.0 prototype devices were delivered to NASA Johnson Space Center (JSC) in September 2011. The prototypes were upgraded with more sophisticated communications and faster response times to version 2.0 and delivered to JSC in July 2012. The sensors incorporate a laser diode based CO2 channel that also includes an incidental water vapor (humidity) measurement. The prototypes are controlled digitally with an field-programmable gate array microcontroller architecture. Based on the results of the iterative instrument development, further prototype development and testing of instruments were performed leveraging the lessons learned where feasible. The present development extends and upgrades the earlier hardware for the advanced PLSS 2.5 prototypes for testing at JSC. The prototypes provide significantly enhanced accuracy for water vapor measurement and eliminate wavelength drift affecting the earlier versions. Various improvements to the electronics and gas sampling are currently being advanced including the companion development of engineering development units that will ultimately be capable of radiation tolerance. The combination of low power electronics with the performance of a long wavelength laser spectrometer enables multi-gas sensors with significantly increased performance over that presently offered in the EMU.

Wood, William R.↗
DOE OSTI2021

Understanding of the factors slowing down metakaolin reaction in limestone calcined clay cement (LC3) at late ages

Factors which could explain the slowing down of the metakaolin reaction in LC{sup 3} blends are investigated. Portlandite availability and the presence of aluminium ions in the pore solution are shown not to be limiting factors. Hydrates can only precipitate in solution filled pores. Internal relative humidity measurements indicate that at 28 days solution is present only in pores with radii below 13 nm. An enhancement of metakaolin reaction was obtained at late ages when the larger capillaries are filled with solution. The lower limit of the water filled pores was more difficult to analyse since there is a lack of precision in determining interfacial energies of hydrates and pore solution of the system. However, this study gives an indication of order of magnitude where the growth of hydrates could be slowed down.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Relationships Between Precipitation Properties and Large-Scale Conditions During Subsidence at the Eastern North Atlantic Observatory

Three years of reanalysis and ground-based observations collected at the Eastern North Atlantic (ENA) observatory are analyzed to document the properties of rain and boundary layer clouds, and their relationship with the large-scale environment during general subsidence conditions and following cold front passages. Clouds in the wake of cold fronts exhibit on average a 10% higher propensity to precipitate and higher rain-to-cloud fraction than cloud found in general subsidence conditions. Similarities in the seasonal cycle of rain and of large-scale properties suggest that the large-scale conditions created by the cold front passage are responsible for the unique properties of the rain forming in its wake. The identification of monotonic relationships between rain-to-cloud fraction and rain rate with surface forcing and boundary layer stability parameters as well as between virga base height with stability and humidity measures further supports that large-scale conditions impact precipitation variability. Likewise, these relationships between the large-scale and rain properties are less clear than those established between cloud and rain properties suggesting that cloud macrophysics have a more direct impact on the properties of rain than the large-scale environment. The applicability of previously documented relationships between rain properties and cloud thickness is tested and the relationships adjusted to accommodate the complex shallow clouds and melting precipitation observed to occur in the ENA region. Furthermore, establishing these relationships opens up opportunities for parametrization development and suggest that a realistic representation of precipitation properties in models relies on the accurate representation of both clouds and the large-scale environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Quantifying UAS Observation Error Variance Used in Data Assimilation Systems and Its Impact on Predictive Skill

Observation error determines the weights of the observations and background state used in data assimilation to generate analyses. Quantifying observation error is critical for the optimal assimilation of observational data sets. Uncrewed Aircraft System (UAS) observations have shown potential benefits in filling observational gaps in the lower atmosphere; however, characterization of their error characteristics has been limited. To optimize the use of UAS observations in numerical weather prediction, UAS observation error is estimated based on the 3‐cornered hat diagnostic approach which uses three independent estimates of the atmospheric state. This approach is applied to data from the 2018 Lower Atmospheric Profiling Studies at Elevation‐a Remotely‐piloted Aircraft Team Experiment field campaign using collocated UAS and rawinsonde observations along with output from a set of convection‐permitting model simulations. The estimated observation error values for UAS temperature, wind, and relative humidity measurements were found to be only weakly dependent on height AGL with mean values equal to 0.5°C, 0.8 m s −1 , and 3%, respectively. Only the newly estimated observation error for temperature differed from that previously used to assimilate commercial aircraft observations into global models (1.0°C). However, using this reduced temperature observation error produced more accurate mesoscale analyses and forecasts of both terrain‐driven flows and convection initiation generated by colliding outflow boundaries within the San Luis Valley of Colorado.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1973

Development and characteristics of free convection in the clear air as seen by radar and aircraft

Observations of the development of a convective field in clear air were made simultaneously using radar and an instrumented aircraft. The growth of the field as seen by the radar was compared with the characteristics of the temperature and humidity measurements made by aircraft at various times and locations within the convective depth. Probability distributions of the temperature and mixing ratio fluctuations exhibit distinct, identifiable characteristics for different regions within the field. The altitude of the aircraft measurement, referenced to the maximum altitude of the convective field at the time of the measurement, was found to be a usable parameter in the comparison of aircraft data and in the characterization of convective field growth. Using the relative height parameter, it was found that the area covered by convective cells (modified air) varies linearly with height in the upper reaches of the convective field. The characteristics of individual cells as seen by the radar and as deduced from the aircraft measurements are also discussed.

Konrad, T. G.↗
NASA NTRS1985

Lidar profiling of thermodynamic properties of the atmosphere

Principles and applications of pulsed laser methods for temperature, pressure, density, and humidity measurements in the altitude range 0-100 km are discussed. The differential absorption lidar (DIAL) method requires that at least one of the transmitted laser pulses be carefully tuned onto an absorption feature of the species, whereas Raman backscatter methods do not require tunability. OH and Na fluorescence require tuning of the excitation, and are the most suitable methods for high altitude where the atomic and molecular reemission is relatively unquenched by collisions.

Wilkerson, T. D.↗
NASA NTRS1994

Differential absorption lidar measurements of atmospheric water vapor using a pseudonoise code modulated AlGaAs laser

Lidar measurements using pseudonoise code modulated AlGaAs lasers are reported. Horizontal path lidar measurements were made at night to terrestrial targets at ranges of 5 and 13 km with 35 mW of average power and integration times of one second. Cloud and aerosol lidar measurements were made to thin cirrus clouds at 13 km altitude with Rayleigh (molecular) backscatter evident up to 9 km. Average transmitter power was 35 mW and measurement integration time was 20 minutes. An AlGaAs laser was used to characterize spectral properties of water vapor absorption lines at 811.617, 816.024, and 815.769 nm in a multipass absorption cell using derivative spectroscopy techniques. Frequency locking of an AlGaAs laser to a water vapor absorption line was achieved with a laser center frequency stability measured to better than one-fifth of the water vapor Doppler linewidth over several minutes. Differential absorption lidar measurements of atmospheric water vapor were made in both integrated path and range-resolved modes using an externally modulated AlGaAs laser. Mean water vapor number density was estimated from both integrated path and range-resolved DIAL measurements and agreed with measured humidity values to within 6.5 percent and 20 percent, respectively. Error sources were identified and their effects on estimates of water vapor number density calculated.

Rall, Jonathan A. R.↗
NASA NTRS1999

An Inexpensive Radiosonde Chilled Mirror Sensor: An Old Technology With New Impact

The availability of an inexpensive chilled mirror dewpoint sensor has made improved atmospheric relative humidity measurements accessible. Comparisons between the chilled mirror sensor and routine radiosonde sensors have provided new information on the limitation and reliability of the routine measurements. The chilled mirror has observed detailed moisture profiles at cirrus cloud levels when cirrus was not visible, a feature that routine sensors fail to observe. Comparison measurements between the chilled mirror, the carbon resistive (hygristor) and, the capacitive sensors will be discussed. Measurements from three locations (Wallops Island; Andros Island, Bahamas; and Camborne, UK) will be highlighted. It is conceivable that the chilled mirror sensor, when its capability is fully understood, may be sufficiently reliable to serve as a reference.

Schmidlin, F. J.↗
NASA NTRS2002

The Aura Mission and the "A-Train"

By the end of 2004 the A-Train will have been assembled in orbit. The A-Train consists of five low earth orbit satellites flying within 15 minutes of each other. The first in the train is Aqua, launched early this year, in an ascending node orbit with 1 :30 PM crossing time. In January 2004, Aura will be launched, following 15 minutes behind Aqua. Aura's focus is atmospheric chemistry, with both forward looking, and backward looking instruments along with nadir sounders. Aura's limb microwave instrument will also be able to make temperature and humidity measurements into the troposphere. By mid-2004, CALIPSO, a cloud lidar mission and CloudSat, a cloud radar mission will be co-manifested. These two spacecraft will follow, and maneuver about 1 minute behind Aqua. The lidar on CALIPSO will provide aerosol and cloud height information which can enhance the aerosol information from Aqua s MODIS instrument. CloudSat s radar will enhance the information from AMSR-E, AIRS and HSB on Aqua. The fifth satellite to be launched in 2004 is PARASOL which will use the POLDER instrument to provide polarization information which can be used to determine aerosol composition and size distribution.

Schoeberl, Mark R.↗
NASA NTRS2003

Accuracy and Precision in the Southern Hemisphere Additional Ozonesondes (SHADOZ) Dataset 1998-2000 in Light of the JOSIE-2000 Results

A network of 12 southern hemisphere tropical and subtropical stations in the Southern Hemisphere ADditional OZonesondes (SHADOZ) project has provided over 2000 profiles of stratospheric and tropospheric ozone since 1998. Balloon-borne electrochemical concentration cell (ECC) ozonesondes are used with standard radiosondes for pressure, temperature and relative humidity measurements. The archived data are available at:http: //croc.gsfc.nasa.gov/shadoz. In Thompson et al., accuracies and imprecisions in the SHADOZ 1998- 2000 dataset were examined using ground-based instruments and the TOMS total ozone measurement (version 7) as references. Small variations in ozonesonde technique introduced possible biases from station-to-station. SHADOZ total ozone column amounts are now compared to version 8 TOMS; discrepancies between the two datasets are reduced 2\% on average. An evaluation of ozone variations among the stations is made using the results of a series of chamber simulations of ozone launches (JOSIE-2000, Juelich Ozonesonde Intercomparison Experiment) in which a standard reference ozone instrument was employed with the various sonde techniques used in SHADOZ. A number of variations in SHADOZ ozone data are explained when differences in solution strength, data processing and instrument type (manufacturer) are taken into account.

Witte, J. C.↗
NASA NTRS2005

NASA Tech Briefs, June 2005

Topics covered include: Apparatus Characterizes Transient Voltages in Real Time; Measuring Humidity in Sealed Glass Encasements; Adaptable System for Vehicle Health and Usage Monitoring; Miniature Focusing Time-of-Flight Mass Spectrometer; Cryogenic High-Sensitivity Magnetometer; Wheel Electrometer System; Carbon-Nanotube Conductive Layers for Thin-Film Solar Cells; Patch Antenna Fed via Unequal-Crossed-Arm Aperture; LC Circuits for Diagnosing Embedded Piezoelectric Devices; Nanowire Thermoelectric Devices; Code for Analyzing and Designing Spacecraft Power System Radiators; Decision Support for Emergency Operations Centers; NASA Records Database; Real-Time Principal- Component Analysis; Fuzzy/Neural Software Estimates Costs of Rocket- Engine Tests; Multicomponent, Rare-Earth-Doped Thermal-Barrier Coatings; Reactive Additives for Phenylethynyl-Containing Resins; Improved Gear Shapes for Face Worm Gear Drives; Alternative Way of Shifting Mass to Move a Spherical Robot; Parylene C as a Sacrificial Material for Microfabrication; In Situ Electrochemical Deposition of Microscopic Wires; Improved Method of Manufacturing SiC Devices; Microwave Treatment of Prostate Cancer and Hyperplasia; Ferroelectric Devices Emit Charged Particles and Radiation; Dusty-Plasma Particle Accelerator; Frozen-Plug Technique for Liquid-Oxygen Plumbing; Shock Waves in a Bose-Einstein Condensate; Progress on a Multichannel, Dual-Mixer Stability Analyzer; Development of Carbon- Nanotube/Polymer Composites; Thermal Imaging of Earth for Accurate Pointing of Deep-Space Antennas; Modifications of a Composite-Material Combustion Chamber; Modeling and Diagnostic Software for Liquefying- Fuel Rockets; and Spacecraft Antenna Clusters for High EIRP.

Source record↗
NASA NTRS2009

The Phoenix Mars Lander Robotic Arm

The Phoenix Mars Lander Robotic Arm (RA) has operated for over 150 sols since the Lander touched down on the north polar region of Mars on May 25, 2008. During its mission it has dug numerous trenches in the Martian regolith, acquired samples of Martian dry and icy soil, and delivered them to the Thermal Evolved Gas Analyzer (TEGA) and the Microscopy, Electrochemistry, and Conductivity Analyzer (MECA). The RA inserted the Thermal and Electrical Conductivity Probe (TECP) into the Martian regolith and positioned it at various heights above the surface for relative humidity measurements. The RA was used to point the Robotic Arm Camera to take images of the surface, trenches, samples within the scoop, and other objects of scientific interest within its workspace. Data from the RA sensors during trenching, scraping, and trench cave-in experiments have been used to infer mechanical properties of the Martian soil. This paper describes the design and operations of the RA as a critical component of the Phoenix Mars Lander necessary to achieve the scientific goals of the mission.

Bonitz, Robert↗
NASA NTRS1999

The Chilled-Mirror Humidity Sensor: Improved Radiosonde Measurements

Chilled-mirror humidity sensor technology recently was adapted for use with the VIZ radiosonde. The principle of the chilled-mirror operation is to lower its temperature until dew forms on the mirror, at that point the dew point temperature is noted and the mirror is then heated to evaporate the moisture. The cycle is repeated. Research conducted from NASA's Wallops Flight Facility has provided comparisons between the chilled-mirror sensor and the carbon hygristor of VIZ, and the capacitive sensors of AIR Inc. and Vaisala Co. We believe the chilled-mirror sensor is accurate and would serve as a reference standard for evaluating operational radiosonde relative humidity sensors. Thus, differences seen in the comparisons are beginning to furnish insight into developing better humidity sensors. We discuss these comparison results as well as reproducibility results from a dual chilled-mirror measurement.

Schmidlin, F. J.↗
NASA NTRS1967

Fluidic oscillator used as humidity sensor

Fluidic oscillator measures the humidity of the hydrogen stream leaving a hydrogen-oxygen fuel cell. The instrument provides continuous readings with a certain speed of response.

Prokopius, P. R.↗