Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydration layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Investigation on nanoscale material removal process of BK7 and fused silica glass during chemical‐mechanical polishing

Abstract Understanding the nanoscale material removal process in chemical mechanical polishing (CMP) is of fundamental importance for the operation and further development of CMP. In this study, the nanoscale material removal processes of both fused silica glass and BK7 glass were investigated based on single‐pad‐asperity polishing experiments. The results indicate that the material removal characteristics are highly dependent on the composition and structure of glass materials. In the mechanically induced chemical bonding removal mode, only atoms locate near the outermost several layers can participate in the formation and breakage of interfacial bridge bonds. Moreover, the force on the abrasive particle must exceed a threshold value to induce significant removal of Si atoms from the glass substrate, because as the breakage of Si glass –O backbonds does not occur in low‐stress conditions. We reveal for the first time that the chemical and mechanical properties of the topmost layer, which is recognized as densification, hydrated, or redeposition layer, have not been significantly affected by the mechanical action of the abrasive particles when polishing in this kind of material removal mode. The results are expected to provide a deeper insight into the nanoscale material removal mechanism during glass CMP.

Wang, Lin↗
DOE OSTI2022

Radiolytic Gas Production from Aluminum Coupons (Alloy 1100 and 6061) in Helium Environments—Assessing the Extended Storage of Aluminum Clad Spent Nuclear Fuel

Corrosion of aluminium alloy clad nuclear fuel, during reactor operation and under subsequent wet storage conditions, promotes the formation of aluminium hydroxide and oxyhydroxide layers. These hydrated mineral phases and the chemisorbed and physisorbed waters on their surfaces are susceptible to radiation-induced processes that yield molecular hydrogen gas (H 2 ), which has the potential to complicate the long-term storage and disposal of aluminium clad nuclear fuel through flammable and explosive gas mixture formation, alloy embrittlement, and pressurization. Here, we present a systematic study of the radiolytic formation of H 2 from aluminium alloy 1100 (AA1100) and 6061 (AA6061) coupons in “dry” (~0% relative humidity) and “wet” (50% relative humidity) helium environments. Cobalt-60 gamma irradiation of both aluminium alloy types promoted the formation of H 2 , which increased linearly up to ~2 MGy, and afforded G-values of 1.1 ± 0.1 and 2.9 ± 0.1 for “dry” and “wet” AA1100, and 2.7 ± 0.1 and 1.7 ± 0.1 for “dry” and “wet” AA6061. The negative correlation of H 2 production with relative humidity for AA6061 is in stark contrast to AA1100 and is attributed to differences in the extent of corrosion and varying amounts of adsorbed water in the two alloys, as characterized using optical profilometry, scanning electron microscopy, Raman spectroscopy, and X-ray diffraction techniques.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Uniaxial stress increases layer stacking disorder in calcium silicate hydrates with low calcium content

The long-term stress response of concrete is controlled by the intergrain and intragrain interactions of calcium-silicate-hydrates (C-S-H), nanocrystalline forms of tobermorites. To investigate both types of interactions, we examined the deviatoric stress response of 11 Å tobermorite powder with X-ray diffraction, finding that its layer stacking (i.e., sliding) disorder significantly increases. A similar experiment was performed on nanocrystalline C-S-H powders before and after applying a 360 MPa uniaxial stress. Layer stacking disorder (in the form of intragrain deformation) increases when there is low water content and when the basal spacing is large. We also find that grains with a smaller thickness-to-diameter aspect ratio are first to develop preferred orientation (in the form of intergrain sliding), facilitated by gel water. Furthermore, these findings show that intragrain deformations in C-S-H can occur at relatively low stresses and provide insights into the creep mechanism of C-S-H.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Site-Selective Atomic Layer Deposition on Rutile TiO 2 : Selective Hydration as a Route to Target Point Defects

Routes to area-and especially site-selective atomic layer deposition (ALD) remain an enticing challenge in precision surface science, despite the potentially game-changing capability for many energy applications. An unparalleled level of surface reaction control is required to direct ALD to select sites on the same nominal material, for example, targeted growth on distinct phases, facets, step-edges, and/or defects. However, as a sequential surface synthesis method, ALD is uniquely suited to these challenges, including the possibility of selective deposition at defective surface atom arrangements. Here, we computationally identify conditions for site-selective ALD through hydration of surface defects, including oxygen vacancies and titanium interstitials on low-index rutile TiO 2 facets. First-principles computation is used to predict, as a function of temperature, the hydroxylation of defects that are targeted by proton-exchange-mediated ALD processes. In situ ellipsometric measurements of ALD Al 2 O 3 nucleation on TiO 2 (110) single crystals prepared with and without abundant oxygen vacancies demonstrate striking contrast, corroborating computational predictions and revealing a mechanistically clear path to site-selective ALD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Stripping away ion hydration shells in electrical double-layer formation: Water networks matter

Significance For centuries the double layer at the solid/electrolyte interface has been a central concept in electrochemistry. Today, it is still crucial for virtually all renewable energy storage and conversion technologies. Here, the double-layer formation is probed by THz spectroscopy with ultrabright synchrotron light as a source. Our results capture the molecular details of double-layer formation at positively/negatively charged Au electrodes for an NaCl electrolyte. We reveal a contrasting response applying positive versus negative bias, which is dictated by the interfacial water network and rationalized by accompanying molecular dynamics simulations and electronic-structure calculations. While Na + is directly attracted toward the negatively charged electrode, stripping of the Cl − hydration shell is observed only at larger potential values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ion complexation waves emerge at the curved interfaces of layered minerals

Abstract Visualizing hydrated interfaces is of widespread interest across the physical sciences and is a particularly acute need for layered minerals, whose properties are governed by the structure of the electric double layer (EDL) where mineral and solution meet. Here, we show that cryo electron microscopy and tomography enable direct imaging of the EDL at montmorillonite interfaces in monovalent electrolytes with ångstrom resolution over micron length scales. A learning-based multiple-scattering reconstruction method for cryo electron tomography reveals ions bound asymmetrically on opposite sides of curved, exfoliated layers. We observe conserved ion-density asymmetry across stacks of interacting layers in cryo electron microscopy that is associated with configurations of inner- and outer-sphere ion-water-mineral complexes that we term complexation waves. Coherent X-ray scattering confirms that complexation waves propagate at room-temperature via a competition between ion dehydration and charge interactions that are coupled across opposing sides of a layer, driving dynamic transitions between stacked and aggregated states via layer exfoliation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Hydrogen Bonding Inside Anionic Polymeric Brush Layer: Machine Learning-Driven Exploration of the Relative Roles of the Polymer Steric Effect, Charging, and Type of Screening Counterions

This paper employs a combination of all-atom molecular dynamics (MD) simulations and unsupervised machine learning (ML) for studying the water-water hydrogen bonds (HBs) inside the anionic poly-acrylic acid (PAA) brushes modeled using all-atom MD simulations. PAA brush layer with different charge fraction (f), namely f=0, f=0.25, and f=1, is considered. Water-water interactions, both inside and outside the brush layer, are represented through distinct clusters of tupules of variables representing distances associated with the interacting water molecules. While clusters representing the HBs are present for water inside and outside the brushes, several clusters representing the long-range water-water interactions are missing for the water molecules inside the highly charged (f=1) PAA brushes. More importantly, inside highly charged brushes, the edge of the clusters representing the water-water HBs is progressively shortened, as compared to that in the bulk. Both these results stem from the presence of the PAA brushes imparting the steric effect and the charge effect, or the effect associated with enhanced interactions of water molecules with PE charges and counterions, thereby disrupting the water connectivity. This water-charged-species interaction also increases the water-water HB angle, i.e., makes the water-water HBs less stable inside the highly charged PAA brush layer. The narrowing of the clusters representing the HBs and the alteration of the angle characterizing the HBs confirm that the conditions defining the water-water HBs change inside the PAA brush layer as a function of the charges on the PAA brush layer. Furthermore, we show that the use of the generic definition of HBs, as compared to using our simulation-motivated modified definition of water-water HBs, overpredict the number of water-water HBs inside the PAA brush layer. Finally, we employ this all-atom-MD-ML framework to quantify the effect of other types of screening counterions (Li + , Ca 2+ , and Y 3+ ions) in determining the water-water interactions and water-water HB properties inside the PAA brush layer. Furthermore, the findings of the present study, confirming the weakening of water-water HBs inside the PAA brush layer, points to the possibility that the water molecules will be more available for hydrating the brush layer and counterions, thereby leading to a more pronounced wetting of the PAA brush layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Mechanism of ion pairing–induced co-ion penetration into the stern layer

In classical electric double layer (EDL) theory, co-ions—ions carrying the same charge as the electrode—are assumed to be excluded from the Stern layer because of electrostatic repulsion. However, ion pairing with adsorbed counterions may enable co-ions to access the EDL, a phenomenon that remains underexplored. Key questions therefore remain unresolved, including how deeply co-ions penetrate, how ion-specific properties govern them, and how ion pairing within the EDL differs from bulk solution. Here, in this study, we employ molecular dynamics simulations combined with well-tempered metadynamics to quantify co-ion penetration and ion-pairing thermodynamics at positively charged Mg-Al layered double hydroxide interfaces (σ = +20.6 μC/cm 2 ) in aqueous chloride electrolytes across 0.005–3 M range. We reveal a concentration-driven crossover: at dilute conditions, counterion–co-ion contact ion pairing (CIP) is thermodynamically unfavorable or only weakly favorable (ΔG CIP = +0.12 kcal/mol for Li + to −0.42 kcal/mol for K + ), leading to co-ion exclusion. As concentration increases (≥0.5 M), enhanced screening reduces surface repulsion and stabilizes CIP thermodynamics (ΔG CIP = −0.89 kcal/mol for Li + to −1.05 kcal/mol for K + at 3 M), enabling monovalent co-ions to penetrate the Stern layer following the hydration hierarchy K + > Na + > Li + , while divalent co-ions (Mg 2+ , Ca 2+ ) remain in the diffuse layer, forming only solvent-separated pairs. Comparison with bulk solution shows interfacial ion pairing is suppressed at low concentrations but converges to bulk-like thermodynamics at high concentrations, indicating surface effects vanish under strong screening. These results establish a quantitative framework linking ion-pairing thermodynamics to co-ion penetration and providing strategies to design electrochemical interfaces.

Co-ion penetration↗
DOE OSTI2025

Subsurface fluvial sediments beneath InSight on Mars from geophysical constraints

Subsurface structure investigation on Mars is crucial for understanding its geological evolution and past hydrological conditions. Elysium Planitia (EP), located near the hypothesized ancient ocean shorelines, could contain clues for past water activity and paleoclimate. Here we present better-constrained subsurface models beneath InSight extending to ~800 m depth, obtained from joint inversion of seismic and seismoacoustic coupling data, and use the well-resolved subsurface structure to explore the lithological profile through rock physics models. The derived subsurface lithology agrees well with local geological context and exhibits a shallow 60-m-thick low-rigidity layer consistent with hydrated sedimentary materials. Despite possible contributions of aeolian and volcanic deposits, we favor the interpretation that the low-rigidity layer originated from fluvial activity in EP during the Hesperian or Hesperian-to-Amazonian epoch, as supported by adjacent paleo-shoreline morphology observations. These results hint at a period of warmer paleoclimate at low latitudes, possibly during high-obliquity phases of Mars’ rotational axis.

58 GEOSCIENCES↗
DOE OSTI2022

Analysis of short‐ and long‐term system response during gas production from a gas hydrate deposit at the UBGH2‐6 site of the Ulleung Basin in the Korean East Sea

Abstract This study is a continuation of an investigation into the feasibility of long‐term production from a marine hydrate accumulation that has the properties and conditions of the UBGH2‐6 (UBGH2, Ulleung Basin Gas Hydrates 2; 2 is the number of the scientific expedition) site at the Ulleung Basin in the Korean East Sea. The 12.7 m‐thick system is in deep water (2157 m), but at 140 m below the seafloor. It is characterized by alternating hydrate‐free clays and muds and hydrate‐rich sand layers. The layered stratigraphy and the presence of mud layers favours the use of vertical wells rather than horizontal wells for production. The analysis indicates that production from such a hydrate accumulation is technically feasible, but the gas production rates are generally low. Water production accompanying gas production from this deposit appears manageable under all the scenarios investigated in this study, however, the water‐to‐gas ratio is high. Subsidence at the ocean floor at the end of a 14 day test is quite limited. However, there is significant uncertainty in the predictions of the geomechanical system's behaviour because they are not based on measured system properties but only on estimates/assumptions from analogues. The long‐term production potential of the reservoir at the site investigated here appears challenging because of the limited effectiveness of dissociation and large water production, in addition to substantial subsidence.

Moridis, George J.↗
DOE OSTI2022

Selective Hydration of Rutile TiO 2 as a Strategy for Site-Selective Atomic Layer Deposition

In this report the feasibility of a site-selective hydration strategy that enables site-selective atomic layer deposition (ALD) is investigated among four rutile TiO 2 facets [(110), (100), (101) and (001)] and their most prevalent step edges. First-principles simulations of asymmetric slab models were utilized to create accurate representations of pristine terrace and step edge sites. The adsorption free energies for molecular and dissociative adsorption of H 2 O were calculated to evaluate this strategy as a viable route to step edge selectivity. We predict that selective hydroxylation is possible on the 110 and 001 step edges and further computationally evaluate three metalorganic ALD precursors for their compatibility with the selective hydration strategy. Experimental evidence for delayed nucleation of ALD on rutile (001), (110), and (100) TiO2 single crystals corroborates predictions of the dehydration of the surface and suggests the possibility of site-selective ALD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Preparation of: I. intercalative metal oxide/conductive polymer composites as electrode materials for rechargeable batteries; II. sodium rich manganese oxide hydrate with capacity for aqueous Na-ion electrochemical energy storage

The present invention is directed at intercalative metal oxide/conductive polymer composites suitable for use as electrode materials for rechargeable batteries. The composites can be prepared by agitation of the metal oxide and the conductive polymer in aqueous media. The present invention is also directed at a sodium rich layered manganese oxide hydrate prepared by annealing manganese (II, III) oxide and sodium hydroxide. The sodium rich manganese (III, IV) oxide so formed indicates an enhanced capacity for Na-ion storage suitable for the use of electrode materials for aqueous energy storage.

Xiaowei, Teng↗
DOE OSTI2020

Structure analysis of supported disordered molybdenum oxides using pair distribution function analysis and automated cluster modelling

Molybdenum oxides and sulfides on various low-cost high-surface-area supports are excellent catalysts for several industrially relevant reactions. The surface layer structure of these materials is, however, difficult to characterize due to small and disordered MoO x domains. Here, it is shown how X-ray total scattering can be applied to gain insights into the structure through differential pair distribution function (d-PDF) analysis, where the scattering signal from the support material is subtracted to obtain structural information on the supported structure. MoO x catalysts supported on alumina nanoparticles and on zeolites are investigated, and it is shown that the structure of the hydrated molybdenum oxide layer is closely related to that of disordered and polydisperse polyoxometalates. By analysing the PDFs with a large number of automatically generated cluster structures, which are constructed in an iterative manner from known polyoxometalate clusters, information is derived on the structural motifs in supported MoO x .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electrochemical Proton Insertion Modulates the Hydrogen Evolution Reaction on Tungsten Oxides

Development of new electrocatalysts for the hydrogen evolution reaction (HER) could reduce dependence on Pt and other rare metals and enable large-scale production of hydrogen with near-zero carbon emissions. Mechanistic insight into the electrocatalytic activity of a material helps to accelerate the development of new electrocatalysts. Alternative electrocatalyst materials such as transition metal oxides and sulfides can undergo insertion reactions that change their properties. Recent reports indicate that the presence of inserted ions can influence electrocatalytic activity. In this work, we utilized a materials chemistry approach to understand the role of proton insertion on the HER activity of layered tungsten oxide hydrates (WO 3 ∙xH 2 O, x = 1, 2). We synthesized a series of tungsten oxide hydrates along with an octylamine-pillared tungsten oxide (OA-WO 3 ). We used cyclic voltammetry to study the electrochemical reactivity of each material and performed ex situ X-ray diffraction and Raman spectroscopy to understand bulk and surface structural changes during electrochemical cycling. We show an inverse relationship between the degree of proton insertion and HER overpotential in tungsten oxides: the lack of proton insertion leads to a high overpotential for the HER. We discuss three hypotheses for how proton insertion leads to HER activity in WO 3 ∙xH 2 O: 1) proton insertion changes the electronic band structure of WO 3 ∙xH 2 O, 2) the presence of bulk protons can influence ΔG H,ads at the surface sites, and 3) inserted protons may participate in the HER mechanism on WO 3 ∙xH 2 O. Overall, this work shows the critical role of proton insertion in enabling high HER activity in tungsten oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Transuranium Sulfide via the Boron Chalcogen Mixture Method and Reversible Water Uptake in the NaCu T S 3 Family

The behavior of 5f electrons in soft ligand environments makes actinides, and especially transuranium chalcogenides, an intriguing class of materials for fundamental studies. Due to the affinity of actinides for oxygen, however, it is a challenge to synthesize actinide chalcogenides using non-metallic reagents. Using the Boron Chalcogen Mixture (BCM) method, we achieved the synthesis of the transuranium sulfide NaCuNpS 3 starting from the oxide reagent, NpO 2 . Via the same synthetic route, the isostructural composition of NaCuUS 3 was synthesized and the material contrasted with NaCuNpS 3 . Single crystals of the U-analog, NaCuUS 3 , were found to undergo an unexpected reversible hydration process to form NaCuUS 3 ·xH 2 O (x ≈ 1.5). Here, a large combination of techniques was used to fully characterize the structure, hydration process, and electronic structures, specifically a combination of single crystal, powder, high temperature powder X-ray diffraction, extended X-ray ab-sorption fine structure, infrared, and inductively coupled plasma spectroscopies, thermogravimetric analysis, and density functional theory calculations. The outcome of these analyses enabled us to determine the composition of NaCuUS 3 ·xH 2 O and obtain a structural model that demonstrated the retention of the local structure within the [CuUS 3 ] – layers throughout the hydration-dehydration process. Band structure, density of states, and Bader charge calculations for NaCuUS 3 , NaCu-US 3 ·xH 2 O, and NaCuNpS 3 along with X-ray absorption near edge structure, UV-vis-NIR and work function measurements on ACuUS 3 (A = Na, K, and Rb) and NaCuUS 3 ·xH 2 O samples were carried out to demonstrate that electronic properties arise from the [CuTS 3 ] – layers and show surprisingly little dependence on the interlayer distance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Small Molecule Sorting: A Fluorescence Study of Microemulsions

The application of microemulsions to a wide range of industries relies on their ability to solubilize small molecules with vastly different structures. Herein, we use multiple fluorescence techniques to probe ionic (rhodamine 6g, r6g), polar (coumarin 153, c153), nonpolar (diphenylanthracene, DPA), and amphiphilic (laurdan) small molecules in a nonionic, bicontinuous microemulsion of varying hydration. All fluorophores investigated were found to associate with the surfactant region despite their different structures and properties. The hydration of the surfactant layer was found to increase linearly with water addition, but while this initially increases the fluidity of the surfactant layer, fluorescence anisotropy of c153 and r6g indicates a stiffening of the surfactant at water content >60%. This stiffening of the surfactant layer at higher water content correlates with a morphological change in the microemulsion from a bicontinuous structure to droplets. In contrast, the nonpolar DPA shows a change in partitioning as hydration changes, increasing its association with the oil domain. Altogether, these studies elucidate not only the capability of these microemulsions to host a range of small molecules in the surfactant layer with tunable position but also the ability to probe the driving force of bulk structural changes in these heterogeneous fluids.

25 ENERGY STORAGE↗
DOE OSTI2023

Liquid Phase Exfoliation of Chemically Prelithiated Bilayered Vanadium Oxide in Aqueous Media for Li-Ion Batteries

Bilayered vanadium oxides are attractive for energy storage due to their high initial specific capacities, which could be stabilized by integrating the bilayers with conductive nanoflakes often produced in a form of aqueous dispersions. Therefore, exfoliation of the bilayered vanadium oxides in water with high yield is desirable. Here, this work introduces the first aqueous exfoliation of chemically prelithiated bilayered vanadium oxide (i.e., δ-Li x V 2 O 5 ·nH 2 O or LVO) followed by vacuum filtration to produce a free-standing film, exhibiting a lamellar stacking of the bilayered vanadium oxide nanoflakes as evidenced by scanning electron microscopy. Due to the hydrated nature of bilayered vanadium oxides, the relationship between interlayer water content and the vacuum drying temperature (105 °C vs 200 °C) was studied using X-ray diffraction, thermogravimetric analysis, and Raman spectroscopy. It was found that vacuum drying the LVO nanoflakes at 200 °C enabled more efficient removal of crystallographic water than drying at 105 °C, and did not induce a phase transformation. Scanning transmission electron microscopy confirmed the layered structure of the samples, which was more well-ordered in the 200 °C case and had no clear boundaries between flakes at the atomic scale. Furthermore, electrochemical testing in nonaqueous Li-ion cells revealed that vacuum drying at 200 °C led to improvements in ion storage capacity and electrochemical stability. Improvements in electrochemical charge storage properties of the electrodes obtained via LVO exfoliation and free-standing film assembly in water dried at 200 °C reveal that conventional battery electrode drying protocols need to be revised as new electrochemically active materials are synthesized, such as hydrated layered oxides with expanded interlayer regions. The remaining capacity fading can be attributed to the structural LVO degradation, dissolution of vanadium oxide in electrolyte, and parasitic effects of the remaining interlayer water molecules. Our results establish an environmentally friendly and safe approach to obtain two-dimensional (2D) bilayered vanadium oxide nanoflakes and create a pathway to constructing novel 2D heterostructures for improved performance in energy storage applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Leveraging Hydration Forces for Size-Specific Nanoparticle Enrichment with a Redox-Responsive Silica-Binding Elastin-Like Polypeptide

Elastin-like polypeptides (ELPs) are low-complexity proteins that coacervate above a characteristic lower critical solution temperature (LCST). While the thermoresponsiveness of ELPs has been widely exploited in the biomedical and biomaterials fields, their ability to mediate nanoparticle assembly below their transition temperature remains largely unexplored. Here, we show that unmodified ELPs induce the reversible flocculation of silica nanoparticles (SiNPs) by forming backbone hydrogen bonds with surface silanols. Interparticle bridging is modulated by ELP length and concentration and by the presence of N- and C-terminal anchoring groups such as a cysteine residue and a Car9 silica-binding peptide. Using a redox-responsive fusion protein consisting of disulfide-bonded ELP domains terminated by Car9 segments, we stabilize 20 nm SiNPs under oxidizing conditions while triggering particle flocculation upon addition of reductant. We find that SiNP sedimentation under reducing conditions exhibits a sharp dependency on particle size that arises from the curvature-dependent structure of surface silanols. While the isolated silanols of SiNPs smaller than 30 nm are efficiently engaged by the ELP domains of Car9-anchored proteins, repulsion forces associated with the presence of a layer of molecular water together with increased electrostatic repulsion preclude efficient engagement of H-bonded silanols displayed on the surface of SiNPs larger than 60 nm. We harness these findings to selectively enrich SiNPs based on size and expand the concept to titania (TiO2) by demonstrating that rutile nanoparticles can be stabilized or sedimented with solid-binding ELPs by adjusting the solution pH to promote or discourage the formation of a hydration layer. These strategies should prove broadly useful for the separation of other oxides and their polymorphs and provide a tunable strategy for nanoparticle assembly and bioinspired colloidal design.

ELP↗