Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrogen redistribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Study of Magnetic Motions in the Solar Photosphere and their Implications for Heating the Solar Atmosphere

We continued our program of CO observations with the McMath-Pierce facility at Kitt Peak National Solar Observatory. Uitenbroek has developed a two-and three dimensional radiative transfer code that now includes chemical equilibrium calculations. This code allows us to compute a CO spectrum from for instance a snapshot of a solar granulation simulation (e.g. Stein & Nordlund 1989, Apj 342, L95) and compare these theoretical spectra with our spatially resolved CO spectroscopy. Van Ballegooijen and Uitenbroek have started calculations of two-dimensional fluxtube models that account consistently for hydrogen ionization in the calculation of the electron density. To this end we solve radiative transfer for hydrogen (bound-bound and bound-free transitions) in the two-dimensional models, including the effect of partial frequency redistribution (PRD) in the Lyman (alpha) and (beta) lines. From our internally consistent models we will calculate emergent spectra and the way these vary with location of some well-known spectral diagnostics and compare our results with observed line profiles. We can readily compare theoretical CO profiles from out models with our spatially resolved CO observations. Also we can compare with spatially resolved Ca II (ground based) and Mg II (we have observations done with the UVSP/SMM instrument), and Lyman (alpha) observations that should be available from SUMER/SOHO.

Noyes, Robert W.↗
DOE OSTI2024

The nontrivial effects of annealing on superconducting properties of Nb single crystals

The effect of annealing on the superconducting properties of niobium single crystals was studied using optical, magnetic, and scanning tunneling microscopy (STM) methods. Pieces of the same crystal boule were studied before and after the annealing at 800 ${^\circ}\textrm{C}$, 1400 ${^\circ}\textrm{C}$, and near the melting point of niobium (2477 ${^\circ}\textrm{C}$). The initial samples had a high hydrogen content and low-temperature imaging revealed large hydrides (hundreds of micrometers) appearing below 190 K. The formation of these large precipitates is already completely suppressed by annealing at 800 ${^\circ}\textrm{C}$. However, the overall superconducting properties of the annealed samples did not improve and, in fact, worsened. In particular, the superconducting transition temperature decreased, the upper critical field increased, and the pinning strength increased. In the STM study, the sample was annealed initially at 400 ${^\circ}\textrm{C}$, measured, annealed at 1700 ${^\circ}\textrm{C}$, and measured again. The STM revealed a ‘dirty’ superconducting gap with a significant spatial variation in tunneling conductance after annealing at 400 ${^\circ}\textrm{C}$. The clean gap was recovered after annealing at 1700 ${^\circ}\textrm{C}$. This is likely due to oxygen redistribution near the surface, which is always covered by oxide layers in as-grown crystals. Our results indicate that vacuum annealing at least up to 1400 ${^\circ}\textrm{C}$, while removing a large percentage of hydrogen, introduces additional nanosized defects, likely hydride precipitates, that act as efficient pair-breaking and pinning centers. The dimensionless scattering rate is estimated to have increased from $\Gamma = 0.2$ to about $\Gamma = 0.4$ after annealing at 1400 ${^\circ}\textrm{C}$. These results on single crystals differ drastically from those obtained in polycrystalline bulk niobium (i.e. cut from superconducting radio-frequency cavities), where annealing is known to have a significant positive effect that is attributed to the improvement of the crystalline structure masking the more subtle influence of the hydrides.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Symmetrization of Strong Hydrogen Bond under High Pressure in Bihydroxide-Ion-Containing NaCu 2 (SO 4 ) 2 ·H 3 O 2 Revealed by Experimental Charge Density, Single-Crystal Electron Diffraction, and Neutron Diffraction Studies

In minerals and inorganic compounds, strong hydrogen bonding can lead to the formation of complex ionic species such as the H 3 O 2 – bihydroxide anion and Zundel cation H 5 O 2 + . We studied [NaCu 2 (SO 4 ) 2 ·H 3 O 2 ] natrochalcite, which contains bihydroxide anions and undergoes hydrogen bond symmetrization at the lowest pressure reported so far among inorganic compounds. Hydrogen bond symmetrization leads to changes in the bulk modulus, seismic wave velocities, and proton mobility and plays a primary role in high-temperature superconductivity, but its characteristics are not well understood due to a lack of systematic studies and limitations of experimental methods sensitive to this subtle change. In this work, we applied experimental charge density analysis based on in situ single-crystal X-ray diffraction data, along with the single-crystal neutron and electron diffraction experiments, to probe the behavior of hydrogen atoms during the hydrogen bond symmetrization process under high-pressure conditions. On the way to the symmetrical H-bonding, natrochalcite undergoes a series of complex redistributions of electron density, which we trace with multipole refinement and detailed analysis of changes in the Laplacian of electron density values. Additionally, we deconvoluted the equation of state (volume of the unit cell vs pressure relation) into the atomic equation of states describing dependencies of atomic charges or volumes vs pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1981

Development of a polysilicon process based on chemical vapor deposition, phase 1

The development of a dichlorosilane-based reductive chemical vapor deposition process for the production of polycrystalline silicon is discussed. Experimental data indicate that the ease of ignition and explosion severity of dichlorosilane (DCS)/air mixtures is substantially attenuated if the DCS is diluted with hydrogen. Redesign of the process development unit to accommodate safety related information is described. Several different sources of trichlorosilane were used to generate a mixture of redistributed chlorosilanes via Dowex ion exchange resin. The unseparated mixtures were then fed to an experimental reactor in which silicon was deposited and the deposited silicon analyzed for electrically active impurities. At least one trichlorosilane source provided material of requisite purity. Silicon grown in the experimental reactor was converted to single crystal material and solar cells fabricated and tested.

Mccormick, J.↗
DOE OSTI2023

Robust Copper-Based Nanosponge Architecture Decorated by Ruthenium with Enhanced Electrocatalytic Performance for Ambient Nitrogen Reduction to Ammonia

Electrochemical conversion of nitrogen to green ammonia is an attractive alternative to the Haber–Bosch process. However, it is currently bottlenecked by the lack of highly efficient electrocatalysts to drive the sluggish nitrogen reduction reaction (N2RR). In this work, we strategically design a cost-effective bimetallic Ru–Cu mixture catalyst in a nanosponge (NS) architecture via a rapid and facile method. The porous NS mixture catalysts exhibit a large electrochemical active surface area and enhanced specific activity arising from the charge redistribution for improved activation and adsorption of the activated nitrogen species. Benefiting from the synergistic effect of the Cu constituent on morphology decoration and thermodynamic suppression of the competing hydrogen evolution reaction, the optimized Ru 0.15 Cu 0.85 NS catalyst presents an impressive N 2 RR performance with an ammonia yield rate of 26.25 μg h –1 mg cat. –1 (corresponding to 10.5 μg h –1 cm –2 ) and Faradic efficiency of 4.39% as well as superior stability in alkaline medium, which was superior to that of monometallic Ru and Cu nanostructures. Additionally, this work develops a new bimetallic combination of Ru and Cu, which promotes the strategy to design efficient electrocatalysts for electrochemical ammonia production under ambient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1978

Travelling neutral disturbances and minor constituent particle mass

The mass cut-offs for critical or resonant coupling of minor species acoustic waves (so-called travelling neutral disturbances) and acoustic-gravity waves in the main atmosphere are shown and explained. The effects of vertical temperature gradients and the diffusion of the minor species on the mass cut-offs are also demonstrated. The wave characteristics of these minor species waves are examined. The wave number surface is shown to be such that energy and group velocity directions are more nearly vertical than those of gravity waves for the same phase velocity direction. It is expected that these coupled waves, when properly excited, will act to damp gravity waves and redistribute energy vertically. Implications for the thermosphere and mesosphere are discussed. Under ordinary conditions such resonant coupling is judged more likely for lighter mass species, such as helium and hydrogen.

Gross, S. H.↗
NASA NTRS1992

Recombination line intensities for hydrogenic ions. III - Effects of finite optical depth and dust

The effect on the recombination spectrum of hydrogen arising from: (1) finite optical thickness in the Lyman lines; (2) the overlapping of Lyman lines near the series limit; (3) the absorption of Lyman lines by dust or photoionization, and (4) the long-wave radiation emitted by dust is examined. Full account is taken of electron and heavy particle collisions in redistributing energy and angular momentum. It is seen that each of these deviations from the classical Case B leads to observable effects, and that dust influences the recombination spectrum in characteristic ways that may make possible new observational constraints on dust properties in nebulosities. On the basis of these calculations it is believed that the uncertainty in the determination of the helium-to-hydrogen abundance ratio in the universe may be larger than currently claimed.

Hummer, D. G.↗
DOE OSTI2021

Defying Thermodynamics: Stabilization of Alane Within Covalent Triazine Frameworks for Reversible Hydrogen Storage

Metastable metal hydrides such as AlH 3 have many attractive features as hydrogen storage media, but generally require complex reaction schemes for regeneration following H 2 release. Here in this paper, we demonstrate that the highly unfavorable thermodynamics of direct aluminum hydrogenation can be overcome by stabilizing alane within a nanoporous bipyridine-functionalized Covalent Triazine Framework (AlH 3 @CTF-bipyridine). This material and the counterpart AlH 3 @CTF-biphenyl rapidly desorb H 2 between 95 and 154 °C, with desorption complete at 250 °C. Sieverts measurements, 27 Al MAS NMR and 27 Al{ 1 H} REDOR experiments, and computational spectroscopy reveal that AlH 3 @CTF-bipyridine dehydrogenation is reversible at 60 °C under 700 bar hydrogen, >10 times lower pressure than that required to hydrogenate bulk aluminum. DFT calculations and EPR measurements support an unconventional mechanism whereby strong AlH 3 binding to bipyridine results in single-electron transfer to form AlH 2 (AlH 3 ) n clusters. The resulting size-dependent charge redistribution alters the dehydrogenation/rehydrogenation thermochemistry, suggesting a novel strategy to enable reversibility in high-capacity metal hydrides.

Coordination Chemistry↗
DOE OSTI2021

Defying Thermodynamics: Stabilization of Alane Within Covalent Triazine Frameworks for Reversible Hydrogen Storage

The highly unfavorable thermodynamics of direct aluminum hydrogenation can be overcome by stabilizing alane within a nanoporous bipyridine-functionalized covalent triazine framework (AlH 3 @CTF-bipyridine). This material and the counterpart AlH 3 @CTF-biphenyl rapidly desorb H 2 between 95 and 154°C, with desorption complete at 250°C. Sieverts measurements, 27 Al MAS NMR and 27 Al{ 1 H} REDOR experiments, and computational spectroscopy reveal that AlH 3 @CTF-bipyridine dehydrogenation is reversible at 60°C under 700 bar hydrogen, >10 times lower pressure than that required to hydrogenate bulk aluminum. DFT calculations and EPR measurements support an unconventional mechanism whereby strong AlH 3 binding to bipyridine results in single-electron transfer to form AlH 2 (AlH 3 ) n clusters. Here the resulting size-dependent charge redistribution alters the dehydrogenation/rehydrogenation thermochemistry, suggesting a novel strategy to enable reversibility in high-capacity metal hydrides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Photocatalytic Overall Water Splitting at the Integrated Rh–MoRhO x Cluster Heterostructure on InGaN/GaN Nanowires

The quest for efficient solar-driven water splitting, a promising avenue for clean fuel production, faces challenges due to limited solar energy conversion efficiency. Traditional approaches study the overall water splitting as two spatially separate half reactions on two unrelated sites, hindering full utilization of photogenerated charge and water molecules. To overcome these limitations, an integrated cluster heterostructure catalyst on InGaN/GaN semiconductor nanowires is proposed for the effective utilization of photogenerated charge carriers and water molecules on the same redox localization. By establishing the fast charge extraction kinetics based on InGaN/GaN nanowires, the integration of Rh and MoRhOx clusters on the nanowire surface enables simultaneous and fast hydrogen/oxygen evolution reactions at the cluster heterostructure. Furthermore, the integrated strategy can enhance the charge redistribution across the heterostructure between the two clusters, further optimizing adsorption of reaction intermediates on each cluster for boosted photocatalytic water splitting activity. Consequently, the integrated heterostructure triggers a 40-fold increased hydrogen production efficiency in an artificial leaf system. This study provides valuable insights for the rational design of advanced heterostructured photocatalysts for water splitting and beyond.

GaN nanowire↗
NASA NTRS1980

A probabilistic approach to radiative energy loss calculations for optically thick atmospheres - Hydrogen lines and continua

An approximate probabilistic radiative transfer equation and the statistical equilibrium equations are simultaneously solved for a model hydrogen atom consisting of three bound levels and ionization continuum. The transfer equation for L-alpha, L-beta, H-alpha, and the Lyman continuum is explicitly solved assuming complete redistribution. The accuracy of this approach is tested by comparing source functions and radiative loss rates to values obtained with a method that solves the exact transfer equation. Two recent model solar-flare chromospheres are used for this test. It is shown that for the test atmospheres the probabilistic method gives values of the radiative loss rate that are characteristically good to a factor of 2. The advantage of this probabilistic approach is that it retains a description of the dominant physical processes of radiative transfer in the complete redistribution case, yet it achieves a major reduction in computational requirements.

Canfield, R. C.↗
DOE OSTI2026

Controlling Exsolution Dynamics in High‐Entropy Oxides for Highly Active and Selective Acetylene Semi‐Hydrogenation

Exsolution-derived catalysts feature robust metal–support interactions that enhance catalytic performance; yet achieving precise control over exsolution dynamics in multicomponent oxides remains challenging. In this study, we demonstrate that exsolution behavior in high-entropy oxides (HEOs) can be rationally tuned through coupled lattice- and valence-engineering to create a highly active and selective catalyst for acetylene semi-hydrogenation. Incorporation of Li + into a rock salt-structured HEO (LiNiMgCuZnCoO x and LiHEO) induces local lattice distortion, generates oxygen vacancies, and partially oxidizes Co sites from Co 2+ to Co 3+ , collectively modulating local charge redistribution. This strategy enables facilitated Cu nanoparticle exsolution and alters the exsolution sequence from Cu 0 > Ni 0 > Co 0 in pristine HEO to Cu 0 > Co 0 > Ni 0 in the LiHEO. The resulting catalyst via controlled exsolution exhibits superior activity and ethylene selectivity, outperforming state-of-the-art transition metal systems. This work establishes entropy-enabled lattice and valence engineering as a facile route to programmable exsolution for enhanced catalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Protonic nickelate device networks for spatiotemporal neuromorphic computing

Computation in biological neural circuits arises from the interplay of nonlinear temporal responses and spatially distributed dynamic network interactions. Replicating this richness in hardware has remained challenging, as most neuromorphic devices emulate only isolated neuron- or synapse-like functions. Here we introduce an integrated neuromorphic computing platform in which both nonlinear spatiotemporal processing and programmable memory are realized within a single perovskite nickelate material system. By engineering symmetric and asymmetric hydrogenated NdNiO 3 junction devices on the same wafer, we combine ultrafast, proton-mediated transient dynamics with stable multilevel resistance states. Networks of symmetric NdNiO 3 junctions exhibit emergent spatial interactions mediated by proton redistribution, while each node simultaneously provides short-term temporal memory, enabling nanosecond-scale operation with an energy cost of ~0.2 nJ per input. When interfaced with asymmetric output units serving as reconfigurable long-term weights, these networks allow both feature transformation and linear classification in the same material system. Leveraging these emergent interactions, the platform enables real-time pattern recognition and achieves high accuracy in spoken digit classification and early seizure detection, outperforming temporal-only or uncoupled architectures. These results position protonic nickelates as a compact, energy-efficient, CMOS-compatible platform that integrates processing and memory for scalable intelligent hardware.

Electrical and electronic engineering↗
DOE OSTI2022

A new perspective on the initial hydrogenation of $\mathrm{TiFe_{0.9}M_{0.1}}$ ($\mathrm{M = V, Cr, Fe, Co, Ni}$) gained from surface oxide analysis and nucleation thermodynamics

Despite the promise of TiFe-based alloys as low-cost solid-state hydrogen storage materials with mild operating conditions and reasonable hydrogen capacity, their initial hydrogenation process is difficult, hindering broad utilization. The effect of alloying element on the initial hydrogenation kinetics of TiFe alloys, TiFe 0.9 M 0.1 (M = V, Cr, Fe, Co and Ni), was evaluated by analyzing changes to the passivating surface oxide layer that inhibits hydrogen permeation, as well as the ease of initial-stage hydrogen absorption into the underlying matrix. X-ray photoelectron spectroscopy and atom probe tomography revealed key variations in surface oxide compositions and thinning of the passivating oxide layer compared to pure TiFe, which suggests suppressed oxide growth by alloying-induced elemental redistribution. At the same time, density functional theory calculations predicted exothermic formation of hydride nuclei when alloying with V or Cr, as well as a reduced nucleation barrier when alloying with Co or Ni. Overall, these results are consistent with the observed experimental trend of the activation kinetics. We propose that improvements in activation kinetics of TiFe with alloying arises from the combined effect of reduced passivating oxide thickness and easier hydride nucleation, offering a starting point for alloy design strategies towards further improvement.

25 ENERGY STORAGE↗
DOE OSTI2024

Understanding electronic structure tunability by metal dopants for promoting MgB 2 hydrogenation

Hydrogen is a promising energy carrier, but its onboard application is limited by the need for compact, low-pressure storage solutions. Solid-state complex metal hydride systems, such as MgB 2 /Mg(BH 4 ) 2 , offer high storage capacities but suffer from sluggish kinetics and poor reversibility. One avenue for improving reactivity is to introduce metal dopants to alter electronic and atomic properties, but the role of these chemical additives remains poorly understood, particularly for the hydrogenation reaction. In this work, we used density functional theory calculations on model MgB 2 systems to rationalize the potential role of metal dopants in destabilizing B–B bonding within the MgB 2 lattice. We carried out detailed electronic structure analyses for 28 different metal dopant adatoms to identify properties that contribute to a dopant’s efficacy. Based on the simulation results, we propose that an intermediate ionic and covalent character of the bonds between adatoms and B atoms is desirable for facilitating charge redistribution, disrupting the B–B bond network, and promoting H 2 dissociation and H atom chemisorption on MgB 2 .

08 HYDROGEN↗
NASA NTRS1980

The implications of hydrogen emission line ratios in quasi-stellar objects

The results of multilevel, depth-dependent, fully interlocked radiative transfer calculations for hydrogen emission line strengths in a single QSO emission line cloud (ELC) are summarized. The hydrogen-line forming region of the ELC is found to be quite thick (tau sub el between 1,000 and 100,000), which is consistent with heating of a pure hydrogen cloud by photoionization. Results indicate that the volume-averaged escape probability approach introduces large errors by assuming, in effect, that a single point in the ELC is representative of the emergent radiation; that the influence of frequency redistribution on the photon escape probability in resonance and subordinate lines must be explicitly recognized, and that full consistency between excitation and ionization processes must be maintained.

Canfield, R. C.↗
DOE OSTI2024

Gas-phase surface modification to control catalyst structure and yields in methane dehydroaromatization

Methane dehydroaromatization (MDA) is a promising approach for direct methane transformation to aromatics and hydrogen. The benchmark catalyst Mo/H-ZSM-5 struggles to find commercial adoption because of thermodynamically-limited yields and rapid coking on Brønsted acid and molybdenum carbide species, especially on zeolite external surfaces. Here, gas-phase atomic layer deposition (ALD) overcoats H-ZSM-5 external surfaces with SiO 2 or Al 2 O 3 . NH 3 -TPD, HRTEM, and textural properties show that these overcoats exclusively passivate zeolite external surfaces. Under MDA conditions, SiO 2 gives softer coke and increases cumulative benzene yields by 25%, while Al 2 O 3 strongly decreases yields. H 2 -TPR and UV-visible and Raman spectroscopy show how the overcoats redisperse the MoO x precatalysts, especially over multiple deactivation and isothermal oxidative regeneration cycles. Combined with 27 Al-MAS NMR, MoO x redistribution and dealumination are seen as the causes of long-term deactivation over multiple regeneration cycles, and this process continues to occur regardless of the overcoat. Altogether, the deposition of a small amount of silica on the outer surface of Mo/H-ZSM-5 reduces the formation of hard coke, which could be regenerated by milder methods such as hydrogen treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

pH‐Mediated Strong Metal‐Support Interaction Construction Through Dynamic Fermi Level Tuning

The metal–support interface is central to governing catalytic transformations. While strong metal–support interaction (SMSI) is an established strategy to tailor the morphology and electronic properties of supported metal catalysts, the role of interfacial charge redistribution in SMSI formation remains poorly understood and rarely leveraged. Here, in this study, we report a dual-stimuli approach that combines pH modulation with ultrasonication to mediate SMSI construction in aqueous solution through dynamic Fermi level tuning. By leveraging in situ pH-driven charge redistribution at the metal–support interface, we achieve controllable SMSI encapsulation of metal nanoparticles, as verified by electrochemical analysis, work function measurements, and x-ray-based techniques. The resulting catalysts exhibit tunable SMSI features and deliver enhanced activity and selectivity in hydrogenation reactions. This work establishes a facile strategy to modulate catalyst structure and electronic properties by exploiting Fermi level variation as a driving force, thereby advancing rational SMSI design and catalytic performance across diverse environments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗