Search NASA⌕ Search

SEARCH · Search NASA

Results for “hysteresis loops”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Magnetoelastic properties of multiferroic hexagonal ErMnO 3

Here, the strength and dynamics of magnetoelastic coupling through the paramagnetic (PM) – antiferromagnetic (AFM) – ferrimagnetic (FIM) transitions in multiferroic hexagonal ErMnO 3 have been investigated by Resonant Ultrasound Spectroscopy. Elastic stiffening by up to 2% below the PM – AFM transition at 80 K arises from biquadratic coupling between strain and the magnetic order parameter with relaxation times longer than ~10 -6 s for the response of spins to changes in strain. In contrast with YMnO 3 , the PM – AFM transition in ErMnO 3 is accompanied by a peak in acoustic loss immediately below the Néel point which is interpreted in terms of strain relaxation accompanying ordering of spins of Er 3+ at 4b sites. Changes in the magnetic ordering scheme at the AFM – FIM transition near 3 K are accompanied by elastic softening of ~0.03 %. During poling of the low temperature ferrimagnetic structure round magnetic hysteresis loops, small changes in elastic stiffness which arise due to the contribution of piezomagnetic and/or piezoelectric moduli are detected. Contributions of piezoelectric moduli to acoustic resonance frequencies also permit changes in the configuration of ferroelectric domains to be detected in response both to cycling through this transition and to application of a magnetic field. A peak in acoustic loss in the vicinity of 250 K is attributed to strain-mediated pinning/freezing of some aspect of the domain microstructure with an activation energy of ~0.25–0.3 eV. A return to the original elastic properties on heating to temperatures above ~250 K is interpreted in terms of backswitching of domains to the configuration they had at the start. These observations confirm the existence of subtle variations in magnetoelastic coupling behaviour relating to both the magnetic order parameters and magnetic domain structures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Structure and magnetism of AlCoCrCuFeNi high-entropy alloy

We report on the investigation of magnetic and structural properties of AlCoCrCuFeNi, which is known to crystallize in a dual phase solid solution: the face-centred cubic (FCC) or the body-centred cubic (BCC). The results of neutron (NPD) and synchrotron powder diffraction (SXRD) allow to partially resolve magnetic information coming from BCC and FCC phases, which is impossible in the bulk magnetic measurements. Electron diffraction (PED) revealed that AlCoCrCuFeNi forms dendritic microstructure with the Cu-rich FCC phase and the Ni-rich BCC phase. Lattice parameters obtained from PED method are in good agreement with parameters obtained after refinement on the basis of powder X-ray diffraction measurements. The local crystal and electronic structure around Co was studied using Co K X-ray Absorption Spectroscopy (XAS). The magnetic measurements show that AlCoCrCuFeNi reveal a ferromagnetic transition at about 330K and displays magnetic hysteresis loop at the room temperature. Results from NPD suggest that the magnetic moment is mostly located in the BCC subsystem. The alloy shows soft magnetic properties. Saturated magnetizations (M s ), remanence ratio (M r /M s ) and coercivity (H c ) of the cast are estimated to be 45.10emu/g, 5.1% and 56 Oe at 300K, respectively. Finally, the BCC-FCC phase transformation up to 673K (400°C) was investigated using temperature dependent NPD, where a possible second BCC phase was identified.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Unusual superparamagnetic behavior in bulk Ba 0.198 La 0.784 Ti 0.096 Fe 0.8 O 3-δ

Here, we report the observation of superparamgnetic behavior induced by the substitution La 3+ by Ba 2+ at A-sites and Fe +3 by Ti 4+ at B-sites. Ba 0.198 La 0.784 Ti 0.096 Fe 0.8 O 3-δ was synthesized via solid state reaction. The Rietveld refinements revealed an orthorhombic (Pbnm). The low-mag STEM results showed that the particles were found to exhibit square like shape and formed in single crystal with high degree of crystallinity. The particle size ranges of 50 300 nm. Element mapping demonstrates a complementary distribution between Ba and La, while homogenous distribution is found for Fe and O. The optical band gap determined from UV-vis analysis is equal to 1.93 eV which is smaller than the reported one for LaFeO 3 and BaTiO 3 . The hysteresis loops at 300 K and 10 K show superparamagnetic behavior, which deviate extremely from the antiferromagnetic nature of LaFeO 3 perovskite. The temperature dependent magnetization demonstrates that the material kept a net magnetization of 12.29 (emu/g) at very low temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Hydrogen influences thermal activation parameters for dislocation glide during low cycle fatigue of 316L stainless steel

Measurements of activation areas are used to investigate the effect of hydrogen on the kinetics of dislocation glide during cyclic deformation in cold-worked 316L stainless steel. Non-charged and hydrogen-precharged (H-precharged) specimens were tested in low cycle fatigue (LCF) under plastic strain control. A series of plastic strain rate changes was performed periodically at the peak true plastic strain from the first cycle to half-life, and at various plastic strain values around stable hysteresis loops near half-life to determine the operational activation area, Δ a ∗. Both material conditions demonstrate a rapid increase in Δ a ∗ during the initial rapid softening followed by a region of approximately constant values coinciding with a reduced rate of softening. Near half-life, hydrogen reduces Δ a ∗ at a given true stress due to its effect on the activation distance and obstacle spacing. The magnitudes of Δ a ∗ reveal that bypassing solutes, cutting forest dislocations, and initiating cross slip are important mechanisms of thermally activated dislocation glide at all amplitudes, except hydrogen suppresses cross slip at the lowest plastic strain amplitudes. These results are supported by electron microscopy characterization of deformed microstructures. A Haasen plot analysis indicates that forest dislocations control the kinetics of deformation in both material conditions. It also reveals the presence of athermal obstacles in both non-charged and H-precharged conditions, likely dense dislocation tangles and cell walls. Additionally, the effect of hydrogen on microstructure evolution (by reducing the propensity for cross slip) leads to a dependence of athermal stress on plastic strain amplitude.

Activation area↗
DOE OSTI2025

Synthesis, Stability, and Magnetic Properties of Antiperovskite Co 3 PdN

Experimental synthesis and characterization of theoretically predicted compounds are important steps in the materials discovery pipeline. Here, we report on the synthesis of Co 3 PdN, which was recently predicted to be a stable magnetic antiperovskite. The Co 3 PdN thin films were grown by reactive sputtering and were confirmed to form in an antiperovskite crystal structure. The thermal stability of the compound is demonstrated up to 600 K by in situ X-ray diffraction, though the phase persists at slightly higher temperatures (700 K) in an air-free magnetometer. Both ab initio calculations and magnetization measurements find Co 3 PdN to be ferromagnetic with an experimentally determined Curie temperature of T C = 560 ± 5 K. The saturation magnetization of 1.2 μ B /Co found in the experiment is slightly lower than the 1.7 μ B /Co value expected by theory. A narrow magnetic hysteresis loop with a coercive field of 100 Oe at low temperature suggests that Co 3 PdN might be useful in electronic applications requiring fast switching of the magnetization vector. While prior prediction of Co 3 PdN showed a gapped electronic band structure for each spin channel, we show that this was due to incomplete sampling of Brillouin zone paths and that band crossings exist along R-X|M and X|M-R paths. The metallic nature of Co 3 PdN is further confirmed by temperature-dependent transport measurements, which also show a considerable anomalous Hall effect. Altogether, this work represents an appreciable step toward understanding the synthesis, structure, stability, and properties of a new magnetic material.

14 SOLAR ENERGY↗
DOE OSTI2024

Ferromagnetic Exchange and Slow Magnetic Relaxation in Cobalt Bis(1,2-dithiolene)-Bridged Dilanthanide Complexes

The construction of multinuclear lanthanide-based molecules with significant magnetic exchange interactions represents a key challenge in the realization of single-molecule magnets with high operating temperatures. Here, we report the synthesis and magnetic characterization of two series of heterobimetallic compounds, (Cp* 2 Ln) 2 (μ-Co(pdt) 2 ) (Ln = Y 3+ , Gd 3+ , Dy 3+ ; pdt 2– = 1,2-diphenylethylenedithiolate) and [K(18-crown-6)][(Cp* 2 Ln) 2 (μ-Co(pdt) 2 )] (Ln = Y 3+ , Gd 3+ ), featuring two lanthanide centers bridged by a cobalt bis(1,2-dithiolene) complex. Dc magnetic susceptibility data collected for the Gd congeners indicate significant Gd–Co ferromagnetic exchange interactions with fits affording J = +11.5 and +7.33 cm –1 , respectively. Magnetization decay and ac magnetic susceptibility measurements carried out on the single-molecule magnet (Cp* 2 Dy) 2 (μ-Co(pdt) 2 ) reveal full suppression of quantum tunneling and open-loop hysteresis persisting up to 3.5 K. These results, along with those of high-field EPR spectroscopy, suggest that transition metalloligands can enforce strong exchange interactions with adjacent lanthanide centers while maintaining a geometry that preserves molecular anisotropy. Furthermore, the magnetic properties of [K(18-crown-6)][(Cp* 2 Gd) 2 (μ-Co(pdt) 2 )] show that increasing the spin of the ground state of the bridging complex may be a viable alternative to increasing J in obtaining well-isolated, strongly coupled magnetic ground states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Achieving High Permittivity Paraelectric Behavior in Mesogen-Free Sulfonylated Chiral Polyethers with Smectic C Liquid Crystalline Self-Assembly

Ferroelectric liquid crystalline polymers (LCPs) with a high spontaneous polarization (P s ) are of great interest for the fabrication of advanced electronic devices. However, conventional ferroelectric LCPs typically exhibit low spontaneous polarization, only around 1 mC/m 2 . To increase the orientational polarization for ferroelectric LCPs, in this work, we designed mesogen-free comb-shaped LCPs based on isotactic polyepichlorohydrin, which contained highly dipolar sulfonyl groups (dipole moment of 4.5 Debye) in the side chains. The goal was to increase dipole density and induce ferroelectric switching. In this new series of mesogen-free LCPs, the sulfonyl groups were first moved away from the main chain to mitigate strong dipole–dipole interactions. Second, methyl-branched alkyl side chains were implemented to decrease the crystallizability and induce the Smectic C (SmC) self-assembly. Intriguingly, these SmC samples, for the first time, exhibited typical paraelectric behavior (i.e., slim S-shaped single hysteresis loops) with a high dielectric constant in the range of 20–30. Finally, learning from the knowledge obtained from this study, we will be able to design new mesogen-free LCPs with tailor-made dipole–dipole interactions and realize ferroelectricity.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Magnon-Magnon Interaction Induced by Dynamic Coupling in a Hybrid Magnonic Crystal

We report a combined experimental and numerical investigation of spin-wave dynamics in a hybrid magnonic crystal consisting of a CoFeB artificial spin ice (ASI) of stadium-shaped nanoelements patterned atop a continuous NiFe film separated by a 5 nm Al 2 O 3 spacer. Using Brillouin light scattering spectroscopy, we probe the frequency dependence of thermal spin waves as functions of applied magnetic field and wavevector, revealing the decisive role of interlayer dipolar coupling in the magnetization dynamics. Micromagnetic simulations complement the experiments, showing a strong interplay between ASI edge modes and backward volume modes in the NiFe film. The contrast in saturation magnetization between CoFeB and NiFe enhances this coupling, leading to a pronounced hybridization manifested as a triplet of peaks in the BLS spectra predicted by simulations and observed experimentally. This magnon−magnon coupling persists over a wide magnetic field range, shaping both the spin-wave dispersion at fixed fields and the full frequency-field response throughout the magnetic hysteresis loop. Our findings establish how ASI geometry can selectively enhance specific spin-wave wavelengths in the underlying film, thereby boosting their amplitude and identifying them as preferential channels for spin wave transmission and manipulation.

Brillouin light scattering spectroscopy↗
DOE OSTI2025

Flux-Closure Domain Structures in Ferroelectric K 0.5 Na 0.5 NbO 3 Thin Films

Topological domain structures in ferroelectric materials have garnered increasing attention due to their intriguing physical properties and promising applications. While most existing topological structures in ferroelectric perovskite oxides originate from tetragonal or rhombohedral bulk phases, much less is understood about their counterparts in orthorhombic ferroelectrics. Here, in this work, we employ ferroelectric K 0.5 Na 0.5 NbO 3 (KNN) thin films as a model system and leverage phase-field simulations to theoretically predict the static structures and dynamic behaviors of three types of flux-closure domain configurations: in-plane (Type-I), out-of-plane (Type-II), and superdomain (Type-III) flux-closure structures. We systematically investigate the effects of finite size, misfit strains, and electrical boundary conditions on the formation and switching of these topological structures. For the Type-I structure, size reduction or small misfit strain facilitates a transition of the flux-closure pattern to polar vortices. Type-II structures emerge under open-circuit electrical boundary conditions of the film, forming at the junctions of specific domain walls with the film surface or the film–substrate interface. The formation mechanisms of these two flux-closure structures are rationalized from an energy perspective. We demonstrated switching capabilities of Type-II and Type-III structures by obtaining polarization–electric field hysteresis loops. Our simulations also reveal a reversible electric-field-induced transition between the orthorhombic and rhombohedral ferroelectric phases with a checkerboard domain pattern, during which the integrity of the flux-closure structure is preserved. These findings provide theoretical insights and practical guidance for identifying and manipulating topological structures in low-symmetry ferroelectrics, paving the way for developing energy-efficient microelectronic devices based on topological structures.

P-E loop↗
DOE OSTI2023

Stress and Curvature Effects in Layered 2D Ferroelectric CuInP 2 S 6

Nanoscale ferroelectric 2D materials offer the opportunity to investigate curvature and strain effects on materials functionalities. Among these, CuInP 2 S 6 (CIPS) has attracted tremendous research interest in recent years due to combination of room temperature ferroelectricity, scalability to a few layers thickness, and ferrielectric properties due to coexistence of 2 polar sublattices. Here, we explore the local curvature and strain effect on polarization in CIPS via piezoresponse force microscopy and spectroscopy. To explain the observed behaviors and decouple the curvature and strain effects in 2D CIPS, we introduce the finite element Landau–Ginzburg–Devonshire model, revealing strong changes in hysteresis characteristics in regions subjected to tensile and compressive strain. The piezoresponse force microscopy (PFM) results show that bending induces ferrielectric domains in CIPS, and the polarization-voltage hysteresis loops differ in bending and nonbending regions. Furthermore, these studies offer insights into the fabrication of curvature-engineered nanoelectronic devices.

2D materials↗
DOE OSTI2024

Precise Modulation of CO 2 Sorption in Ti 8 Ce 2 –Oxo Clusters: Elucidating Lewis Acidity of the Ce Metal Sites and Structural Flexibility

Investigating the structure-property correlation in porous materials is a fundamental and consistent focus in various scientific domains, especially within sorption research. Metal oxide clusters with capping ligands, characterized by intrinsic cavities formed through specific solid-state packing, demonstrate significant potential as versatile platforms for sorption investigations due to their precisely tunable atomic structures and inherent long-range order. This study presents a series of Ti 8 Ce 2 -oxo clusters with subtle variations in coordinated linkers and explores their sorption behavior. Notably, Ti 8 Ce 2 -BA (BA denotes benzoic acid) manifests a distinctive two-step profile during CO 2 adsorption, accompanied by a hysteresis loop. This observation marks a new instance within the metal oxide cluster field. Of intrigue, the presence of unsaturated Ce(IV) sites was found to be correlated with the stepped sorption property. Moreover, the introduction of an electrophilic fluorine atom, positioned ortho or para to the benzoic acid, facilitated precise control over gate pressure and stepped sorption quantities. Advanced in-situ techniques systematically unraveled the underlying mechanism behind this unique sorption behavior. The findings elucidate that robust Lewis base-acid interactions are established between CO 2 molecules and Ce ions, consequently altering the conformation of coordinated linkers. Conversely, the F atoms primarily contribute to gate pressure variation by influencing the Lewis acidity of the Ce sites. This research advances the understanding in fabricating metal-oxo clusters with structural flexibility and provides profound insights into their host-guest interaction motifs. Furthermore, these insights hold substantial promise across diverse fields and offer valuable guidance for future adsorbent designs grounded in fundamental theories of structure-property relationships.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Three-dimensional strain dynamics govern the hysteresis in heterogeneous catalysis

Understanding catalysts strain dynamic behaviours is crucial for the development of cost-effective, efficient, stable and long-lasting catalysts. Here, we reveal in situ three-dimensional strain evolution of single gold nanocrystals during a catalytic CO oxidation reaction under operando conditions with coherent X-ray diffractive imaging. We report direct observation of anisotropic strain dynamics at the nanoscale, where identically crystallographically-oriented facets are qualitatively differently affected by strain leading to preferential active sites formation. Interestingly, the single nanoparticle elastic energy landscape, which we map with attojoule precision, depends on heating versus cooling cycles. The hysteresis observed at the single particle level is following the normal/inverse hysteresis loops of the catalytic performances. This approach opens a powerful avenue for studying, at the single particle level, catalytic nanomaterials and deactivation processes under operando conditions that will enable profound insights into nanoscale catalytic mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2021

In-plane quasi-single-domain BaTiO 3 via interfacial symmetry engineering

The control of the in-plane domain evolution in ferroelectric thin films is not only critical to understanding ferroelectric phenomena but also to enabling functional device fabrication. However, in-plane polarized ferroelectric thin films typically exhibit complicated multi-domain states, not desirable for optoelectronic device performance. Here we report a strategy combining interfacial symmetry engineering and anisotropic strain to design single-domain, in-plane polarized ferroelectric BaTiO 3 thin films. Theoretical calculations predict the key role of the BaTiO 3 /PrScO 3 (110) O substrate interfacial environment, where anisotropic strain, monoclinic distortions, and interfacial electrostatic potential stabilize a single-variant spontaneous polarization. A combination of scanning transmission electron microscopy, piezoresponse force microscopy, ferroelectric hysteresis loop measurements, and second harmonic generation measurements directly reveals the stabilization of the in-plane quasi-single-domain polarization state. This work offers design principles for engineering in-plane domains of ferroelectric oxide thin films, which is a prerequisite for high performance optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Tunable symmetry breaking in a hexagonal-stacked moiré magnet

Symmetry plays a central role in defining magnetic phases, making tunable symmetry breaking across magnetic transitions highly desirable for discovering non-trivial magnetism. Magnetic moiré superlattices, formed by twisting two-dimensional magnetic crystals, have been theoretically proposed and experimentally explored as platforms for unconventional magnetic states. However, despite recent advances, the ability to tune symmetry breaking in moiré magnetism remains limited, as twisted two-dimensional magnets predominantly inherit the magnetic properties and symmetries of their constituent layers. Here, in this work, we demonstrate a clear evolution of symmetry in hexagonal-stacked twisted double-bilayer CrI 3 as the twist angle increases from 180° to 190°. Although the net magnetization remains zero across this twist-angle range, the magnetic phase breaks only the threefold rotational symmetry at 180°, but it breaks all the rotational, mirror and time-reversal symmetries at intermediate twist angles between 181° and 185°, and all broken symmetries are recovered at 190°. This pronounced symmetry breaking at intermediate twist angles is accompanied by metamagnetic behaviour, evidenced by symmetric double hysteresis loops around zero magnetic field. Together, these results reveal that hexagonal-stacked twisted double-bilayer CrI3 at intermediate twist angles hosts a distinct moiré magnetic phase, featuring periodic in-plane spin textures with broken rotational, mirror and time-reversal symmetries.

Sun, Zeliang (ORCID:0009000770748064)↗
DOE OSTI2025

Inhomogeneity in electronic phase and flat band in magnetic kagome metal Co 3 Sn 2 S 2

Co 3 Sn 2 S 2 has been reported to be a Weyl semimetal with c-axis ferromagnetism below a Curie temperature of 177 K. Despite the large interest in Co 3 Sn 2 S 2 , the magnetic structure is still unclear. Recent studies have challenged the magnetic phase diagram of Co 3 Sn 2 S 2 by reporting unusual magnetic phases including the presence of exchange bias. Here we show, using X-ray Magnetic Circular Dichroism, a shift in the magnetization hysteresis loop, reminiscent of exchange bias and establish that the magnetic moment in Co arises from the spin, with negligible orbital moment. At 6 K, using spatially-resolved angle-resolved photoemission spectroscopy, we detect a butterfly-shaped electronic band structure at small regions of the sample distinct from the known ferromagnetic band structure. Our density functional theory calculations suggest that the butterfly bands correspond to an antiferromagnetic phase. Separately, we detect a sharp flat band at the Fermi level at some regions in the sample, which we attribute to a surface state. These different electronic states found in a stoichiometric intermetallic invite further efforts to explore the origin and nature of the electronic inhomogeneity associated to magnetism on the mesoscale.

Electronic properties and materials↗
DOE OSTI2024

Emergence of exchange bias in van der Waals magnetic alloy CrxPt1−xTe2

Abstract Cr x Pt 1− x Te 2 is a recently developed van der Waals magnetic alloy noted for its stability under ambient conditions. Here, we report the emergence of an exchange bias effect in Cr x Pt 1− x Te 2 , without typical exchange bias sources such as an adjacent antiferromagnetic layer. We find that the exchange bias is present for x = 0.45 and absent for x = 0.35, which is correlated to the presence of a Cr modulation where the Cr concentration alternates each vdW layer (modulation period of 2 layers) for x ≥ 0.4. We perform Monte Carlo simulations utilizing exchange parameters from first-principles calculations, which recreate the exchange bias in hysteresis loops of Cr 0.45 Pt 0.55 Te 2 . From our simulations, we infer the source of exchange bias to be magnetic moments locked into free energy minima that resist magnetization reversal. This work presents a way to introduce desirable magnetic properties to van der Waals magnets.

Bailey-Crandell, Ryan↗
DOE OSTI2020

Study of the magnetic interface and its effect in Fe/NiFe bilayers of alternating order

We present a comprehensive study on the magnetization reversal in the Fe/NiFe bilayer system by alternating the order of the magnetic layers. All the samples show growth-induced uniaxial magnetic anisotropy due to the oblique angle deposition technique. Strong interfacial exchange coupling between the Fe and NiFe layers leads to single-phase hysteresis loops in the bilayer system. The strength of coupling being dependent on the interface changes upon alternating the order of magnetic layers. The magnetic parameters such as coercivity H C , and anisotropy field H K become almost doubled when a NiFe layer is grown over the Fe layers. This enhancement in the magnetic parameters is primarily dependent on the increase of the thickness and magnetic moment of the Fe–NiFe interfacial layer as revealed from the polarized neutron reflectivity (PNR) data of the bilayer samples. The difference in the thickness and magnetization of the Fe–NiFe interfacial layer indicates the modification of the microstructure by alternating the order of the magnetic layers of the bilayers. The interfacial magnetic moment increased by almost 18% when the NiFe layer was grown over the Fe layer. In spite of the different values of anisotropy fields and modified interfacial exchange coupling, the Gilbert damping constant values of the ferromagnetic bilayers remain similar to the single NiFe layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Giant spontaneous polarization for enhanced ferroelectric properties of biaxially oriented poly(vinylidene fluoride) by mobile oriented amorphous fractions

Poly(vinylidene fluoride) (PVDF) and its random copolymers exhibit the most distinctive ferroelectric properties; however, their spontaneous polarization (60–105 mC m -2 ) is still inferior to those (>200 mC m -2 ) of the ceramic counterparts. In this work, we report an unprecedented spontaneous polarization ( P s = 140 mC m -2 ) for a highly poled biaxially oriented PVDF (BOPVDF) film, which contains a pure β crystalline phase. Given the crystallinity of ~0.52, the P s for the β phase ( P s,β ) is calculated to be 279 mC m -2 , if a simple two-phase model of semicrystalline polymers is assumed. This high P s,β is invalid, because the theoretical limit of P s,β is 185 mC m -2 , as calculated by density functional theory. To explain such a high P s for the poled BOPVDF, a third component in the amorphous phase must participate in the ferroelectric switching to contribute to the P s . Namely, an oriented amorphous fraction (OAF) links the lamellar crystal and the mobile amorphous fraction. From the hysteresis loop study, the OAF content was determined to be ~0.28, more than 50% of the amorphous phase. Because of the high polarizability of the OAFs, the dielectric constant of the poled BOPVDF reached nearly twice the value of conventional PVDF. Overall, the fundamental knowledge obtained from this study will provide a solid foundation for the future development of PVDF-based high performance electroactive polymers for wearable electronics and soft robotic applications.

36 MATERIALS SCIENCE↗