Search NASA⌕ Search

SEARCH · Search NASA

Results for “imaging radar interferometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Topography estimation with interferometric synthetic aperture radar using fringe detection

Methods are presented for using Synthetic Aperture Radar (SAR) interferometry data to estimate surface topography. An expression is given to relate the elevation of a ground point to the phase difference of SAR images received from two spatially separated antennas. An iterative algorithm which solves for the position and elevation of each point in the image simultaneously is developed. One of the critical issues that determines the accuracy of the terrain mapping is the phase unwrapping. An approach to the problem by fringe line detection is proposed. The algorithms are tested with two Seasat SAR images of terrain near Yellowstone National Park. The resultant elevation map is compared with a USGS terrain elevation model. The error of the SAR elevation with respect to the digital terrain map is about 8.2 percent of the total terrain variation.

Lin, Qian↗
NASA NTRS1988

Satellite radar interferometry - Two-dimensional phase unwrapping

Interferometric synthetic aperture radar observations provide a means for obtaining high-resolution digital topographic maps from measurements of amplitude and phase of two complex radar images. The phase of the radar echoes may only be measured modulo 2 pi; however, the whole phase at each point in the image is needed to obtain elevations. An approach to 'unwrapping' the 2 pi ambiguities in the two-dimensional data set is presented. It is found that noise and geometrical radar layover corrupt measurements locally, and these local errors can propagate to form global phase errors that affect the entire image. It is shown that the local errors, or residues, can be readily identified and avoided in the global phase estimation. A rectified digital topographic map derived from the unwrapped phase values is presented.

Goldstein, Richard M.↗
NASA NTRS1993

Satellite Radar Interferometry for Monitoring Ice-Sheet Motion: Application to an Antarctic Ice Stream

As a new means of monitoring the flow velocities and grounding-line positions of ice streams, which are indicators of response of the Antarctic and Greenland ice sheets to climatic change or internal instability, the method of satellite radar interferometry (SRI) is here proposed and applied to the Rutford Ice Stream, Antarctica. The method uses phase comparison of the radar signal obtained for a pair of SAR images taken a few days apart to plot an interferogram which directly displays relative ground motions that have occurred in the time interval between images. The detection limit is about 1.5 mm for vertical motions and about 4 mm for horizontal motions in the radar beam direction. In the Rutford Ice Stream, SRI velocities agree fairly well with earlier ground-truth data over a longitudinal interval of 29 km; the comparison suggests a secular decrease in velocity of about 2 percent from 1978-80 to 1992...

Goldstein, R. M.↗
NASA NTRS1993

Satellite Radar Interferometry for Monitoring Ice-Sheet Motion: Application to an Antarctic Ice Stream

As a new means of monitoring the flow velocities and grounding-line positions of ice streams, which are indicators of response of the Antarctic and Greenland ice sheets to climatic change or internal instability, the method of satellite radar interferometry (SRI) is here proposed and applied to the Rutford Ice Stream, Antarctica. The method uses phase comparison of the radar signal obtained for a pair of SAR images taken a few days apart to plot an interferogram which directly displays relative ground motions that have occurred in the time interval between images. The detection limit is about 1.5 mm for vertical motions and about 4 mm for horizontal motions in the radar beam direction. In the Rutford Ice Stream, SRI velocities agree fairly well with earlier ground-truth data over a longitudinal interval of 29 km; the comparison suggests a secular decrease in velocity of about 2 percent from 1978-80 to 1992...

Goldstein, R. M.↗
NASA NTRS2008

Observations and Mitigation of RFI in ALOS PALSAR SAR Data; Implications for the Desdyni Mission

Initial examination of ALOS PALSAR synthetic aperture radar (SAR) data has indicated significant radio frequency interference (RFI) in several geographic locations around the world. RFI causes significant reduction in image contrast, introduces periodic and quasi-periodic image artifacts, and introduces significant phase noise in repeat pass interferometric data reduction. The US National Research Council Decadal Survey of Earth Science has recommended DESDynI, a Deformation, Ecosystems, and Dynamics of Ice satellite mission comprising an L-band polarimetric radar configured for repeat pass interferometry. There is considerable interest internationally in other future L-band and lower frequency systems as well. Therefore the issues of prevalence and possibilities of mitigation of RFI in these crowded frequency bands is of considerable interest. RFI is observed in ALOS PALSAR in California, USA, and in southern Egypt in data examined to date. Application of several techniques for removing it from the data prior to SAR image formation, ranging from straightforward spectral normalization to time-domain, multi-phase filtering techniques are considered. Considerable experience has been gained from the removal of RFI from P-band acquired by the GeoSAR system. These techniques applied to the PALSAR data are most successful when the bandwidth of any particular spectral component of the RFI is narrow. Performance impacts for SAR imagery and interferograms are considered in the context of DESDynI measurement requirements.

InSAR↗
NASA NTRS1993

Spaceborne Imaging Radar-C instrument

The Spaceborne Imaging Radar-C is the next radar in the series of spaceborne radar experiments, which began with Seasat and continued with SIR-A and SIR-B. The SIR-C instrument has been designed to obtain simultaneous multifrequency and simultaneous multipolarization radar images from a low earth orbit. It is a multiparameter imaging radar that will be flown during at least two different seasons. The instrument operates in the squint alignment mode, the extended aperture mode, the scansar mode, and the interferometry mode. The instrument uses engineering techniques such as beam nulling for echo tracking, pulse repetition frequency hopping for Doppler centroid tracking, generating the frequency step chirp for radar parameter flexibility, block floating-point quantizing for data rate compression, and elevation beamwidth broadening for increasing the swath illumination.

Huneycutt, Bryan L.↗
NASA NTRS1992

Measuring ocean coherence time with dual-baseline interferometry

Using the Jet Propulsion Laboratory (JPL) Airborne Synthetic Aperture Radar (AIRSAR) interferometer, measurements of the ocean coherence time at L and C band can be made at high spatial resolution. Fundamental to this measurement is the ability to image the ocean interferometrically at two different time-lags, or baselines. By modifying the operating procedure of the existing two antenna interferometer, a technique was developed make these measurements. L band coherence times are measured and presented.

Carande, Richard E.↗
NASA NTRS2022

Measurement of Surface Deformation Related to the December 2018 Mt. Etna Eruption Using Time-Series Interferometry and Magma Modeling for Hazard Zone Mapping

Mount Etna has erupted several times since it was first formed. Recently, Mount Etna began erupting again over 24–27 December 2018. Because it erupts frequently, Mount Etna should be observed on a frequent basis. From June 2018 to October 2019, 34 and 56 interferometric synthetic aperture radar (InSAR) images were acquired from the ascending and descending tracks of the Sentinel-1 satellite, respectively. We employed the Stanford Method for Persistent Scatterers (StaMPS) and a refined small baseline subset (SBAS) InSAR method to produce a surface deformation time-series map. In the time-series analysis, the phase signal remained unaltered with time. The Okada model was then applied to the result to generate a modeled interferogram, and the Q-LavHA program was run to generate a lava flow prediction model. A direct comparison of the results showed that Persistent Scatterers Interferometry (PSI)-StaMPS and the refined SBAS technique were comparable in terms of the displacement pattern, with slightly different velocity values obtained for individual points. In particular, a velocity range of −25 to 21 cm/yr was obtained from PSI-StaMPS, whereas a range of −30 to 25 cm/yr was obtained from the refined SBAS method. Upon computation of the vertical and east-west displacement components based on ascending and descending track data using both methods, deformation velocities of 51.5 and 52.5 cm/yr in the westerly direction on the western flank of Mount Etna were obtained from PSI-StaMPS and the refined SBAS method, respectively, whereas on the eastern flank, deformation toward the east was estimated to occur at a velocity of 50.1 or 54.2 cm/yr, respectively. PSIStaMPS estimated a vertical deformation velocity of −5.3 to 18.3 cm/yr, whereas the refined SBAS method produced a velocity range of approximately −7 to 19 cm/yr. The interferogram obtained via Okada modeling showed two fault sources in the 2018 Mount Etna eruption and a total volume change of approximately 12.39 × 10 6 m 3 . From the modeling results, a lava flow prediction model was generated using the Q-LavHA program. The approaches described in this study can be used by government officials, authorities, and other decision-makers to monitor and assess the risk of volcanic activity in the region.

Suci Ramayanti↗
NASA NTRS1993

Interferometric synthetic aperture radar imagery of the Gulf Stream

The advent of interferometric synthetic aperture radar (INSAR) imagery brought to the ocean remote sensing field techniques used in radio astronomy. Whilst details of the interferometry differ between the two fields, the basic idea is the same: Use the phase information arising from positional differences of the radar receivers and/or transmitters to probe remote structures. The interferometric image is formed from two complex synthetic aperture radar (SAR) images. These two images are of the same area but separated in time. Typically the time between these images is very short -- approximately 50 msec for the L-band AIRSAR (Airborne SAR). During this short period the radar scatterers on the ocean surface do not have time to significantly decorrelate. Hence the two SAR images will have the same amplitude, since both obtain the radar backscatter from essentially the same object. Although the ocean surface structure does not significantly decorrelate in 50 msec, surface features do have time to move. It is precisely the translation of scattering features across the ocean surface which gives rise to phase differences between the two SAR images. This phase difference is directly proportional to the range velocity of surface scatterers. The constant of proportionality is dependent upon the interferometric mode of operation.

Ainsworth, T. L.↗
NASA NTRS2000

Topographic Phase Recovery from Stacked ERS Interferometry and a Low-Resolution Digital Elevation Model

A hybrid approach to topographic recovery from ERS interferometry is developed and assessed. Tropospheric/ionospheric artifacts, imprecise orbital information, and layover are key issues in recovering topography and surface deformation from repeat-pass interferometry. Previously, we developed a phase gradient approach to stacking interferograms to reduce these errors and also to reduce the short-wavelength phase noise (see Sandwell arid Price [1998] and Appendix A). Here the method is extended to use a low-resolution digital elevation model to constrain long-wavelength phase errors and an iteration scheme to minimize errors in the computation of phase gradient. We demonstrate the topographic phase recovery on 16-m postings using 25 ERS synthetic aperture radar images from an area of southern California containing 2700 m of relief. On the basis of a comparison with 81 GPS monuments, the ERS derived topography has a typical absolute accuracy of better than 10 m except in areas of layover. The resulting topographic phase enables accurate two-pass, real-time interferometry even in mountainous areas where traditional phase unwrapping schemes fail. As an example, we form a topography-free (127-m perpendicular baseline) interferogram spanning 7.5 years; fringes from two major earthquakes and a seismic slip on the San Andreas Fault are clearly isolated.

Sandwell, David T.↗
NASA NTRS1998

Analysis of Daily, Seasonal, and Interannual Changes in Hofsjokull Ice Cap, Iceland, using Satellite Data

Analysis of a time series of European Remote Sensing Satellite (ERS)-1 and -2, RADARSAT ScanSAR synthetic aperture radar (SAR) and Landsat images from 1973 to 1998, shows daily to interannual changes in Hofsjokull, a 923 sq km ice cap in central Iceland. A digital elevation model of Hofsjokull was constructed using interferometry, and then SAR backscatter coefficient (d) was plotted with elevation, and air temperature along a transect across the ice cap. Most of the a' changes measured along the transect are caused by a change in the state (frozen or thawed) of the surficial snow or ice when air temperature rises above or below about -5 to O C. Seasonal (sigma)deg patterns are identified in a 4-year time series of 57 ERS-1 and -2 images. In addition, June 1997 ScanSAR images display rapid changes in brightness that are tied closely to daily meteorological events. SAR and Landsat data were also used to measure changes in the areal extent of Hofsjokull, from 1973 to 1997, and to locate (sigma)deg and reflectance boundaries that relate to the glacier facies. Late-summer 1997 (sigma)deg and reflectance boundaries agree and are coincident with the approximate location of the fim line, and the January 1998 position of the equilibrium line as determined from ERS-2 data.

Hall, D. K.↗
NASA NTRS1992

Topographic mapping from ERS-1 and SEASAT radar interferometry

A radar interferometric technique for topographic mapping of surfaces yields a high resolution, globally consistent approach to generation of digital elevation models. The technique is illustrated with maps generated from SEASAT and European Space Agency Remote Sensing Satellite (ERS-1) data. A SEASAT interferometric image of a forested area which includes some unvegetated lava flows is analyzed. An analysis of errors expected from application of the technique to maps generated from ERS-1 data is presented. An orbital scenario for a global mapping mission is outlined.

Zebker, Howard A.↗
NASA NTRS1990

Innovative operating modes and techniques for the spaceborne imaging radar-C instrument

The operation of the spaceborne imaging radar-C (SIR-C) is discussed. The SIR-C instrument has been designed to obtain simultaneous multifrequency and simultaneous multipolarization radar images from a low earth orbit. It is a multiparameter imaging radar which will be flown during at least two different seasons. The instrument has been designed to operate in innovative modes such as the squint alignment mode, the extended aperture mode, the scansar mode, and the interferometry mode. The instrument has been designed to demonstrate innovative engineering techniques such as beam nulling for echo tracking, pulse-repetition frquency hopping for Doppler centroid tracking, generating the frequency step chirp for radar parameter flexibility, block floating point quantizing for data rate compression, and elevation beamwidth broadening for increasing the swath illumination.

Huneycutt, Bryan L.↗
NASA NTRS2016

First Image Products from EcoSAR - Osa Peninsula, Costa Rica

Designed especially for forest ecosystem studies, EcoSAR employs state-of-the-art digital beamforming technology to generate wide-swath, high-resolution imagery. EcoSARs dual antenna single-pass imaging capability eliminates temporal decorrelation from polarimetric and interferometric analysis, increasing the signal strength and simplifying models used to invert forest structure parameters. Antennae are physically separated by 25 meters providing single pass interferometry. In this mode the radar is most sensitive to topography. With 32 active transmit and receive channels, EcoSARs digital beamforming is an order of magnitude more versatile than the digital beamforming employed on the upcoming NISAR mission. EcoSARs long wavelength (P-band, 435 MHz, 69 cm) measurements can be used to simulate data products for ESAs future BIOMASS mission, allowing scientists to develop algorithms before the launch of the satellite. EcoSAR can also be deployed to collect much needed data where BIOMASS satellite wont be allowed to collect data (North America, Europe and Arctic), filling in the gaps to keep a watchful eye on the global carbon cycle. EcoSAR can play a vital role in monitoring, reporting and verification schemes of internationals programs such as UN-REDD (United Nations Reducing Emissions from Deforestation and Degradation) benefiting global society. EcoSAR was developed and flown with support from NASA Earth Sciences Technology Offices Instrument Incubator Program.

InSAR↗
NASA NTRS1992

Temporal decorrelation in repeat pass-radar interferometry

Correlation in pass-to-pass, interferometric radar can be degraded by thermal noise, lack of parallelism between the radar flight tracks, spatial baseline noise, and surficial change. The effects of decorrelation due to thermal noise can be easily evaluated and removed, while those due slight angular changes between flight tracks are negligible for data acquired using near-repeat orbits. Empirical results obtained using images of Death Valley confirm that as the baseline increases, the overall correlation decreases due to spatial baseline noise. It is shown that areas of Cottonball Basin in Death Valley remained unchanged over the three-week period for which data was obtained, while a heavily forested area in Oregon exhibited significant temporal decorrelation. Lava in central Oregon also appeared to decorrelate. The results demonstrate that generation of height maps of heavily vegetated areas using pass-to-pass interferometry is practical, provided that the time between passes is at most several weeks.

Villasenor, John↗