Search NASA⌕ Search

SEARCH · Search NASA

Results for “incorporation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Temperature-Dependent Sn Incorporation and Defect Formation in Pseudomorphic SiSn Layers on Si (001) via Molecular Beam Epitaxy

SiSn alloys have attracted growing interest for group-IV bandgap engineering, although their epitaxial growth remains challenging due to the extremely low equilibrium solubility of Sn in Si. In this work, fully strained (pseudomorphic) SiSn epitaxial layers were grown on Si (001) substrates by means of molecular beam epitaxy. A systematic investigation reveals a strong inverse correlation between growth temperature and Sn incorporation efficiency. Despite a constant Sn flux, the incorporated Sn composition decreases from 5.5% to 3.2% as the growth temperature increases, indicating a pronounced temperature dependence of Sn incorporation. Reflection high-energy electron diffraction indicates a gradual transition of the growth from two-dimensional to three-dimensional with increasing film thickness. Structural characterization by means of X-ray diffraction, atomic force microscopy, and transmission electron microscopy confirms the pseudomorphic growth and smooth surface morphology and reveals twins and stacking faults near the surface region. These results establish a quantitative reference for SiSn growth kinetics and provide guidance for future studies of SiSn and SiGeSn alloys in silicon-compatible electronic and optoelectronic applications.

SiSn alloys↗
DOE OSTI2023

The combined effects of Mg 2+ and Sr 2+ incorporation during CaCO 3 precipitation and crystal growth

Calcite (CaCO 3 ) composition and properties are defined by the chemical environment in which CaCO 3 forms. However, a complete understanding of the relationship between aqueous chemistry during calcite precipitation and resulting chemical and physical CaCO 3 properties remains elusive; therefore, we present an investigation into the coupled effects of divalent cations Sr 2+ and Mg 2+ on CaCO 3 precipitation and subsequent crystal growth. Through chemical analysis of the aqueous phases and microscopy of the resulting calcite phases in compliment with density functional theory calculations, we elucidate the relationship between crystal growth and the resulting composition (elemental and isotopic) of calcite. The results of this experimental and modeling work suggest that Mg 2+ and Sr 2+ have cation-specific impacts that inhibit calcite crystal growth, including: (1) Sr 2+ incorporates more readily into calcite than Mg 2+ (D Sr > D Mg ), and increasing [Sr 2+ ] t or [Mg 2+ ] t increases D Sr ; (2) the inclusion of Mg 2+ into structure leads to a reduction in the calcite unit cell volume, whereas Sr 2+ leads to an expansion; (3) the inclusion of both Mg 2+ and Sr 2+ results in a distribution of unit cell impacts based on the relative positions of the Sr 2+ and Mg 2+ in the lattice. These experiments were conducted at saturation indices of CaCO 3 of ~4.1, favoring rapid precipitation. This rapid precipitation resulted in observed Sr isotope fractionation confirming Sr isotopic fractionation is dependent upon the precipitation rate. We further note that the precipitation and growth of calcite favors the incorporation of the lighter 86 Sr isotope over the heavier 87 Sr isotope, regardless of the initial solution conditions, and the degree of fractionation increases with D Sr . In sum, these results demonstrate the impact of solution environment to influence the incorporation behavior and crystal growth behavior of calcite. These factors are important to understand in order to effectively use geochemical signatures resulting from calcite precipitation or dissolution to gain specific information.

58 GEOSCIENCES↗
DOE OSTI2022

Impact of Remdesivir Incorporation along the Primer Strand on SARS-CoV-2 RNA-Dependent RNA Polymerase

Remdesivir was the first antiviral drug that received emergency use authorization from the United States Food and Drug Administration and is now formally approved to treat COVID-19. Remdesivir is a nucleotide analogue that targets the RNA-dependent RNA polymerase (RdRp) of coronaviruses, including SARS-CoV-2. The solution of multiple RdRp structures has been one of the main axes of research in the race against the SARS-CoV-2 virus. Several hypotheses of the mechanism of inhibition of RdRp by remdesivir have been proposed, although open questions remain. This work uses molecular dynamics simulations to explore the impact of remdesivir and two analogues as incoming nucleotides and of up to four incorporations of remdesivir along the primer strand on RdRp. The simulation results suggest that the overall structure and the dynamical behavior of RdRp are destabilized by remdesivir and the two analogues in the incoming position. The incorporation of remdesivir along the primer strand impacts specific non-bonded interactions between the nascent RNA and the polymerase subunit, as well as the overall dynamical networks on RdRp. The strongest impact on the structure and dynamics are observed after three incorporations, when remdesivir is located at position -A3, in agreement with previously reported experimental and computational results. Our results provide atomic-level details of the role played by remdesivir on the disruption of RNA synthesis by RdRp and the main drivers of these disruptions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Cationic α-Diimine Nickel and Palladium Complexes Incorporating Phenanthrene Substituents: Highly Active Ethylene Polymerization Catalysts and Mechanistic Studies of syn/anti Isomerization

α-Diimine palladium complexes incorporating phenanthryl- and 6,7-dimethylphenanthrylimino groups have been synthesized and characterized. The (diimine)PdMeCl complexes prepared from 2,3-butanedione and acenaphthenequinone bearing the unsubstituted phenanthrylimino groups, 12a and 14a, respectively, exist as a mixture syn and anti isomers in a ca. 1:1 ratio. Separation and X-ray diffraction analysis of 14a-syn and 14a-anti isomers confirms the syn/anti assignments. The barrier to interconversion of 14a-syn and 14a-anti via ligand rotation, ΔG ‡ , was found to be 25.5 kcal/mol. The corresponding (diimine)PdMeCl complex prepared from acenaphthenequinone and incorporating the 6,7-dimethylphenanthrylimino group exists solely as the anti isomer, 14b, due to steric crowding which destabilizes the syn isomer. Analogous (diimine)NiBr2 complexes were prepared from 2,3-butanedione incorporating the phenanthrylimino group, 16a, and the 6,7-dimethylphenanthrylimino group, 16b. Nickel-catalyzed polymerizations of ethylene were carried out by activation of the dibromide complexes 16a and 16b using various aluminum alkyl activators. Complex 16a yields a bimodal distribution polymer, the low molecular weight fraction originating from the syn isomer and the high molecular weight fraction arising from the anti isomer. Polymerizations carried out by 16b yield only high molecular weight polymers with monomodal distributions due to the existence of a single isomer (anti) as the active catalyst. All polymers are linear or nearly so. All catalysts are highly active but catalysts derived from 16b are somewhat more active than 16a and exhibit turnover frequencies general over 10 6 and up to 5 × 10 6 per hour (40 °C, 27.2 atm ethylene, 15 min). Here, active palladium ethylene oligomerization catalysts were generated by conversion of the neutral methyl chloride complexes 14a and 14b to the cationic nitrile complexes 15a and 15b via halide abstraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Elucidating the Structural and Electronic Effects of Ni and Mn Cationic Incorporation on CoOOH for Efficient Benzyl Alcohol Electrooxidation

Transition-metal oxyhydroxides such as CoOOH are promising low-cost electrocatalysts for the selective electrooxidation of organic molecules, yet the influence of ubiquitous transition-metal impurities on their performance and durability remains poorly understood. Here, we experimentally probed the individual and synergistic electrochemical and structural effects of Ni and Mn incorporations into model CoOOH electrocatalysts toward an efficient benzyl alcohol oxidation reaction (BAOR). Comprehensive electrochemical, microscopic, and spectroscopic analyses reveal that Ni incorporation enhances charge-transfer kinetics and overall activity through the formation of catalytically active Ni 3+ sites, whereas Mn exhibited a more complex but interesting role. At the early stages of operation, Mn 4+ acts as a stabilizing surface layer that mitigates catalyst degradation but partially blocks Co sites before they undergo gradual leaching. The concurrent incorporation of both Ni and Mn yields a trimetallic 2NMC@NF electrocatalyst that integrates the activity benefits of Ni with the stability conferred by Mn, achieving 92.9% benzyl alcohol conversion and 91.4% Faradaic efficiency after 24 h at 1.5 V vs RHE. These findings elucidate how trace Ni and Mn impurities, often introduced from electrolytes or external sources, can modulate the lattice and electronic structure of CoOOH, offering a design strategy for enhancing both activity and long-term stability in electrocatalytic organic oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hidden role of Bi incorporation in nonradiative recombination in methylammonium lead iodide

Bismuth incorporation has been shown to significantly decrease the performance of perovskite solar cells, which has led to the common belief that Bi Pb is a strong nonradiative recombination center in hybrid perovskites. Using rigorous first-principles calculations, we demonstrate that Bi Pb is not an efficient recombination center. However, Bi acts as a donor, and pushes the Fermi level closer to the conduction band; this shift promotes the formation of iodine interstitials, which are the actual nonradiative recombination centers. Here, these insights explain why Bi incorporation is detrimental for the photovoltaic performance. More generally, it draws attention to the detrimental role unintentionally incorporated impurities can play, not by acting as nonradiative recombination centers themselves, but by shifting the Fermi level and thereby promoting the formation of efficiency-killing defects.

36 MATERIALS SCIENCE↗
DOE OSTI2021

An accurate, non-empirical method for incorporating decoherence into Ehrenfest dynamics

In mixed quantum-classical nonadiabatic molecular dynamics methods, the anchoring of the electronic wave function to a single nuclear geometry results in both quantitative and qualitative errors in the dynamics. In the context of both Ehrenfest and trajectory surface hopping methods, methods for incorporating decoherence are widely used to eliminate these errors. However, the accuracy of these methods often depends strongly on the parameterization of the decoherence time and/or other related quantities. Here, we present a refinement of the recently introduced collapse to a block (TAB) scheme for incorporating decoherence into Ehrenfest dynamics. The proposed approach incorporates an approximation to the history of the population dynamics and treats the coherence decay as Gaussian, rather than exponential. This method uses parameters that can be obtained from first principles, rather than empirical fitting. Application to one-dimensional models indicates excellent agreement with numerically exact simulations. We also introduce a second refinement to the TAB method: a robust linear least-squares algorithm for determining collapse probabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Increasing aggregate size reduces single-cell organic carbon incorporation by hydrogel-embedded wetland microbes

Abstract Microbial degradation of organic carbon in sediments is impacted by the availability of oxygen and substrates for growth. To better understand how particle size and redox zonation impact microbial organic carbon incorporation, techniques that maintain spatial information are necessary to quantify elemental cycling at the microscale. In this study, we produced hydrogel microspheres of various diameters (100, 250, and 500 μm) and inoculated them with an aerobic heterotrophic bacterium isolated from a freshwater wetland (Flavobacterium sp.), and in a second experiment with a microbial community from an urban lacustrine wetland. The hydrogel-embedded microbial populations were incubated with 13C-labeled substrates to quantify organic carbon incorporation into biomass via nanoSIMS. Additionally, luminescent nanosensors enabled spatially explicit measurements of oxygen concentrations inside the microspheres. The experimental data were then incorporated into a reactive-transport model to project long-term steady-state conditions. Smaller (100 μm) particles exhibited the highest microbial cell-specific growth per volume, but also showed higher absolute activity near the surface compared to the larger particles (250 and 500 μm). The experimental results and computational models demonstrate that organic carbon availability was not high enough to allow steep oxygen gradients and as a result, all particle sizes remained well-oxygenated. Our study provides a foundational framework for future studies investigating spatially dependent microbial activity in aggregates using isotopically labeled substrates to quantify growth.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Thermodynamics of boron incorporation in BGaN

We study the thermodynamics of boron (B) incorporation into gallium nitride (GaN) using first-principles calculations. In the dilute limit, we have calculated the formation energies of different configurations of the B impurity in GaN and found that substitution on the cation site is favored over substitution on the anion site. Furthermore, under p-type conditions, interstitial boron can become the more favorable configuration and will ultimately limit the p-type conductivity. At higher B concentrations we use the generalized quasi-chemical approximation to elucidate the thermodynamic stability of boron gallium nitride (BGaN) alloys. We also investigate the effects of strain, which will be present if BGaN alloys are grown pseudomorphically on a GaN substrate.Without strain, B incorporation at typical growth conditions is limited to about 1.4% at 800 °C. Pseudomorphic strain raises the limit to 3.0% at the same temperature, close to experimentally observed levels of B incorporation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Warming and elevated CO 2 promote rapid incorporation and degradation of plant‐derived organic matter in an ombrotrophic peatland

Abstract Rising temperatures have the potential to directly affect carbon cycling in peatlands by enhancing organic matter (OM) decomposition, contributing to the release of CO 2 and CH 4 to the atmosphere. In turn, increasing atmospheric CO 2 concentration may stimulate photosynthesis, potentially increasing plant litter inputs belowground and transferring carbon from the atmosphere into terrestrial ecosystems. Key questions remain about the magnitude and rate of these interacting and opposing environmental change drivers. Here, we assess the incorporation and degradation of plant‐ and microbe‐derived OM in an ombrotrophic peatland after 4 years of whole‐ecosystem warming (+0, +2.25, +4.5, +6.75 and +9°C) and two years of elevated CO 2 manipulation (500 ppm above ambient). We show that OM molecular composition was substantially altered in the aerobic acrotelm, highlighting the sensitivity of acrotelm carbon to rising temperatures and atmospheric CO 2 concentration. While warming accelerated OM decomposition under ambient CO 2 , new carbon incorporation into peat increased in warming × elevated CO 2 treatments for both plant‐ and microbe‐derived OM. Using the isotopic signature of the applied CO 2 enrichment as a label for recently photosynthesized OM, our data demonstrate that new plant inputs have been rapidly incorporated into peat carbon. Our results suggest that under current hydrological conditions, rising temperatures and atmospheric CO 2 levels will likely offset each other in boreal peatlands.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Short-Term Stable Isotope Probing of Proteins Reveals Taxa Incorporating Inorganic Carbon in a Hot Spring Microbial Mat

The upper green layer of the chlorophototrophic microbial mats associated with the alkaline siliceous hot springs of Yellowstone National Park consists of oxygenic cyanobacteria ( Synechococcus spp.), anoxygenic Roseiflexus spp., and several other anoxygenic chlorophototrophs. Synechococcus spp. are believed to be the main fixers of inorganic carbon (C i ), but some evidence indicates that Roseiflexus spp. also contribute to inorganic carbon fixation during low-light, anoxic morning periods. Contributions of other phototrophic taxa have not been investigated. In order to follow the pathway of C i incorporation into different taxa, mat samples were incubated with [ 13 C]bicarbonate for 3 h during the early-morning, low-light anoxic period. Extracted proteins were treated with trypsin and analyzed by mass spectrometry, leading to peptide identifications and peptide isotopic profile signatures containing evidence of 13 C label incorporation. A total of 25,483 peptides, corresponding to 7,221 proteins, were identified from spectral features and associated with mat taxa by comparison to metagenomic assembly sequences. A total of 1,417 peptides, derived from 720 proteins, were detectably labeled with 13 C. Most 13 C-labeled peptides were derived from proteins of Synechococcus spp. and Roseiflexus spp. Chaperones and proteins of carbohydrate metabolism were most abundantly labeled. Proteins associated with photosynthesis, C i fixation, and N 2 fixation were also labeled in Synechococcus spp. Importantly, most proteins of the 3-hydroxypropionate bi-cycle for C i fixation in Roseiflexus spp. were labeled, establishing that members of this taxocene contribute to C i fixation. Other taxa showed much lower [ 13 C]bicarbonate incorporation. IMPORTANCE Yellowstone hot spring mats have been studied as natural models for understanding microbial community ecology and as modern analogs of stromatolites, the earliest community fossils on Earth. Stable-isotope probing of proteins (Pro-SIP) permitted short-term interrogation of the taxa that are involved in the important process of light-driven C i fixation in this highly active community and will be useful in linking other metabolic processes to mat taxa. Here, evidence is presented that Roseiflexus spp., which use the 3-hydroxypropionate bi-cycle, are active in C i fixation. Because this pathway imparts a lower degree of selection of isotopically heavy C i than does the Calvin-Benson-Bassham cycle, the results suggest a mechanism to explain why the natural abundance of 13 C in mat biomass is greater than expected if only the latter pathway were involved. Understanding how mat community members influence the 13 C/ 12 C ratios of mat biomass will help geochemists interpret the 13 C/ 12 C ratios of organic carbon in the fossil record.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Incorporating new locations into a hydrodynamic model using ArcGIS Pro

ALGE3D is a 3-D hydrodynamic model developed at the Savannah River National Laboratory to predict pollutant dispersion. The model has several predefined locations incorporated, however adding new locations into ALGE3D is manually intensive and time-consuming. In the event of an emergency, ALGE3D can only be used if an event occurs at one of the predefined locations incorporated into the GUI. This project focuses on streamlining the integration of new locations into ALGE3D by utilizing tools in ArcGIS Pro. The Stream Order tool was used to delineate streams and assign them an order, using the Strahler method, versus manually defining these streams in Microsoft Excel. This work advances development to turn ALGE3D into a product for emergency response use by allowing the user to incorporate a new location into ALGE3D quickly, should an event occur at a location that is not already predefined.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1972

Space shuttle propulsion systems on-board checkout and monitoring system development study (extension). Volume 2: Guidelines for for incorporation of the onboard checkout and monitoring function on the space shuttle

Guidelines are presented for incorporation of the onboard checkout and monitoring function (OCMF) into the designs of the space shuttle propulsion systems. The guidelines consist of and identify supporting documentation; requirements for formulation, implementation, and integration of OCMF; associated compliance verification techniques and requirements; and OCMF terminology and nomenclature. The guidelines are directly applicable to the incorporation of OCMF into the design of space shuttle propulsion systems and the equipment with which the propulsion systems interface. The techniques and general approach, however, are also generally applicable to OCMF incorporation into the design of other space shuttle systems.

Source record↗
NASA NTRS1988

Influence of substrate misorientation on defect and impurity incorporation in GaAs/AlGaAs heterostructures grown by molecular-beam epitaxy

GaAS/AlGaAs heterostructures have been grown by molecular-beam epitaxy on GaAs substrates intentionally oriented (tilted) a few degrees (0-6.5) off the (001) plane towards either (111)A, (111)B, or (011). It was observed that the 4-K photoluminescence and low-field electron transport properties of these structures may be functions of the substrate tilt angle and tilt direction, depending on the concentration of impurities incorporated during growth. A substrate tilt during molecular-beam epitaxy is observed to have the largest effect on these properties when the background impurity concentration in the molecular-beam epitaxial machine is high. This supports the contention that the observed changes in material characteristics are due to differences in the incorporation of defects and impurities. The incorporation of defects and impurities are reduced by using substrates tilted toward (111)A, in comparison to nominally flat (001) substrates or substrates tilted toward (111)B.

Radulescu, D. C.↗
NASA NTRS2003

Glucose-dependent insulinotropic peptide stimulates thymidine incorporation in endothelial cells: role of endothelin-1

We have previously characterized the receptor for glucose-dependent insulinotropic polypeptide (GIPR) in vascular endothelial cells (EC). Different EC types were found to contain distinct GIPR splice variants. To determine whether activation of the GIPR splice variants resulted in different cellular responses, we examined GIP effects on human umbilical vein endothelial cells (HUVEC), which contain two GIPR splice variants, and compared them with a spontaneously transformed human umbilical vein EC line, ECV 304, which contains four GIPR splice variants. GIP dose-dependently stimulated HUVEC and ECV 304 proliferation as measured by [3H]thymidine incorporation. GIP increased endothelin-1 (ET-1) secretion from HUVEC but not from ECV 304. Use of the endothelin B receptor blocker BQ-788 resulted in an inhibition of [3H]thymidine incorporation in HUVEC but not in ECV 304. These findings suggest that, although GIP increases [3H]thymidine incorporation in both HUVEC and ECV 304, this proliferative response is mediated by ET-1 only in HUVEC. These differences in cellular response to GIP may be related to differences in activation of GIPR splice variants.

NASA Discipline Clinical Medicine↗
NASA NTRS2016

Incorporation of Damage and Failure into an Orthotropic Elasto-Plastic Three-Dimensional Model with Tabulated Input Suitable for Use in Composite Impact Problems

A material model which incorporates several key capabilities which have been identified by the aerospace community as lacking in the composite impact models currently available in LS-DYNA(Registered Trademark) is under development. In particular, the material model, which is being implemented as MAT 213 into a tailored version of LS-DYNA being jointly developed by the FAA and NASA, incorporates both plasticity and damage within the material model, utilizes experimentally based tabulated input to define the evolution of plasticity and damage as opposed to specifying discrete input parameters (such as modulus and strength), and is able to analyze the response of composites composed with a variety of fiber architectures. The plasticity portion of the orthotropic, three-dimensional, macroscopic composite constitutive model is based on an extension of the Tsai-Wu composite failure model into a generalized yield function with a non-associative flow rule. The capability to account for the rate and temperature dependent deformation response of composites has also been incorporated into the material model. For the damage model, a strain equivalent formulation is utilized to allow for the uncoupling of the deformation and damage analyses. In the damage model, a diagonal damage tensor is defined to account for the directionally dependent variation of damage. However, in composites it has been found that loading in one direction can lead to damage in multiple coordinate directions. To account for this phenomena, the terms in the damage matrix are semi-coupled such that the damage in a particular coordinate direction is a function of the stresses and plastic strains in all of the coordinate directions. The onset of material failure, and thus element deletion, is being developed to be a function of the stresses and plastic strains in the various coordinate directions. Systematic procedures are being developed to generate the required input parameters based on the results of experimental tests.

Finite Element Method↗
DOE OSTI2024

Gender Mainstreaming in Nuclear Security: Strategies for Incorporating Gender Equality by Design in the IAEA Milestones Approach

Gender mainstreaming has emerged as a critical mechanism towards achieving gender equality in the development and implementation of laws, policies, and programs, including those related to national security. Gender mainstreaming is generally defined as the process of assessing the implications for women and men of any planned action, including legislation, policies, and programs, in all areas and at all levels, with the ultimate goal to achieve gender equality. Gender mainstreaming, which in essence can be thought of as “gender equality by design,” is an important element for building a robust nuclear security infrastructure. To date, however, gender mainstreaming has not been fully operationalized in the nuclear sector. For instance, the IAEA Milestones Approach, which provides important guidance to states seeking to develop nuclear power programs, has not yet incorporated or addressed gender considerations in its various phases or nuclear infrastructure issues, including those related to nuclear security. Therefore, this paper will argue that specifically for nuclear newcomer states, gender mainstreaming could serve as a powerful tool to integrate gender considerations into the design of laws, policies, programs, and entities necessary to successfully implement a nuclear power program. The objective of this study is twofold: first, to explore the concept of gender mainstreaming and its relevance to nuclear security, and second, to identify how gender can be incorporated into the IAEA Milestones Approach. The paper will emphasize the importance of developing guidance for the IAEA and nuclear newcomer states on how gender considerations could be incorporated throughout the development of a nuclear security program.

Siserman-Gray, Ioana-Cristina↗
DOE OSTI2020

Incorporating Lanthanum into Mesoporous Silica Foam Enhances Enzyme Immobilization and the Activity of Penicillin G Acylase Due to Lewis Acid-Base Interactions

Penicillin G acylase (PGA) has been immobilized on a lanthanum-incorporated mesostructured cellular foam (La-MCF) support by using the interaction between the strong Lewis acid sites on the surface of La-MCF and the free amino groups of lysine residues of PGA. The La-MCF support was successfully synthesized in situ through the addition of a citric acid (CA) complexant. The results of pyridine-IR spectroscopy show the presence of strong Lewis acid sites on the surface of the prepared La-MCF (with CA), attributed to the incorporation of lanthanum species into the framework of MCF. Through interaction with the strong Lewis acid sites, the enzymes can be firmly immobilized on the surface of the support. The results indicate that PGA/La-MCF (with CA) exhibits a high specific activity and greatly enhanced operational stability. For the hydrolysis of penicillin G potassium salt, the initial specific activity of PGA/La-MCF (with CA) reaches 10023 U/g. Finally, even after being recycled 10 times, PGA/La-MCF (with CA) retains 89 % of its initial specific activity, much higher than the 77 % of PGA/Si-MCF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗