Search NASA⌕ Search

SEARCH · Search NASA

Results for “information complexity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

A biophysical approach to the performance diagnosis of human–building energy interaction: Information (bits) modeling, algorithm, and indicators of energy flow complexity

Highlights: • Energy-related human-building interaction is analyzed at the biophysical system scale. • Energy flow-networking model of environmental building performance is suggested. • Information is suggested as a holistic building performance metric. - Abstract: This article addresses the utmost upstream impacts of human–building energy interaction by proposing a network-based model, algorithms, and indicators. Hypothesizing that human behavior is a key factor for the symbiotic development of building and the geobiosphere system, the author seeks emergy (spelled with an “m”)-information integrated measures to indicate dynamic system-level performance of the interaction with building energy flow topology. To validate the hypothesis and methods, four representative building cases were tested on the building form (envelope) of (i) a building with no occupant intervention (baseline), (ii) a building controlled by responsive human behavior (bioclimatic adaptation), (iii) a building with reinforced insulation and behavior-dominated control (passive design), and (iv) a net-zero energy building (NZEB). The results demonstrate that adaptive human behavior in building operation increases the information content and complexity of energy-flow networking, improving performance and sustainability. Findings also reveal that increasing information, complexity, and power (energy availability over time) parallel the general energetic features of developing biophysical systems (greater feedback, internalization, and recycling of materials and energies). It becames clear that active behavioral response is a dominant agent of sustainable environments even on a far broader system scale.

54 ENVIRONMENTAL SCIENCES↗

A Theoretical Approach for Reliability Within Information Supply Chains With Cycles and Negations

Complex networks of information processing systems, or information supply chains, present challenges for performance analysis. Here, we establish a mathematical setting, in which a process within an information supply chain can be analyzed in terms of the functionality of the system’s components. Principles of this methodology are rigorously defended and induce a model for determining the reliability for the various products in these networks. Our model does not limit us from having cycles in the network, as long as the cycles do not contain negation. It is shown that our approach to reliability resolves the nonuniqueness caused by cycles in a probabilistic Boolean network. An iterative algorithm is given to find the reliability values of the model, using a process that can be fully automated. This automated method of discerning reliability is beneficial for systems managers. As a systems manager considers systems modification, such as the replacement of owned and maintained hardware systems with cloud computing resources, the need for comparative analysis of system reliability is paramount. The model is extended to handle conditional knowledge about the network, allowing one to make predictions of weaknesses in the system. Finally, to illustrate the model’s flexibility over different forms, it is demonstrated on a system of components and subcomponents.

97 MATHEMATICS AND COMPUTING↗

Machine-Learning Architecture for Ultrasonic Thermometry

Temperature distribution in solids can be inverted from the speed of sound (SOS) measurements, as has been shown feasible by timing the propagation of the excitation pulse and the train of echoes in ultrasonically segmented waveguides (WGs) and metal components. However, complicated geometries and closely-space echogenic features (EFs) create complex waveforms, from which the segmental time of flights (TOFs) are impossible to estimate using traditional methods. This work describes a machine learning architecture shown to extract temperature information from complex ultrasonic waveforms without explicit measurements of segmental TOFs. We accomplish this by using an autoencoder neural network (NN) to map ultrasonic waveforms into a low-dimensional latent space. A second NN then maps the latent space into unknown temperature distribution along the WG. The proposed architecture was tested in simulations and experimentally. The autoencoder accurately reconstructs the waveforms from their latent representation, several orders of magnitude lower in dimensionality. The obtained latent space was successfully mapped into the temperature of the propagation path.

John, Mason↗

Final Report for the Advanced Outage Control Center Dashboard with Predictive Tools

The “Advanced Outage Control Center” (AOCC) pilot project was part of the Light Water Reactor Sustainability (LWRS) program and was a multi-year effort targeted at NPP outage improvement. The primary purpose of this pilot project was to improve management of NPP outages through the development of AOCC features and facilities designed specifically to maximize the usefulness of communication and collaboration technologies for outage coordination and problem resolution activities. Later stages of the project focused more on tools that utilize technology to improve the outage manager’s understanding of the true outage status. The primary tool that resulted from this research was an innovative outage information dashboard with built-in data analysis and predictive capabilities. In its present form, the dashboard specifically takes advantage of visualization techniques that allow users to view and understand the status of the outage at a glance, without the need to drill down to find detail information. The dashboard also incorporates historical performance data to help evaluate current performance. The key innovation in this dashboard concept is not only its ability to avoid the complexity of raw data presentation, but also to predict the completion of the current outage using data analysis of the current schedule and historical performance of the plant. Through the LWRS program, a relationship between Idaho National Laboratory and Arizona Public Service (APS) was established to investigate the application of specialized techniques to analyze and visualize complex outage information. APS has supported efforts to implement advanced methods to improve the management of outages at the three units of the Palo Verde Nuclear Generating Station (PVNGS). The project has produced the basic principles and methodology for the development of sophisticated outage information analysis and presentation tools.

99 GENERAL AND MISCELLANEOUS↗

Resolving Lipid Structures for Threat-Agnostic Signatures

Development of threat-agnostic biosignatures is critical for the detection of and response to biological threats that go beyond the historical list-based approach. Lipids are a class of structurally diverse biomolecules that hold great promise as relevant threat-agnostic biosignatures, yet the fundamental challenge of resolving and decoding structural differences among lipids remains an obstacle in the pursuit of signature development. Structural analysis of complex lipids remains stymied due to spectral complexity and the inability to resolve low abundance lipids. To address these challenges, we integrated ozonolysis with ion mobility mass spectrometry (IMS-MS) analysis to determine the structural information for complex lipid species and (2) reduced lipid sample complexity prior to introduction into the IMS-MS using normal phase high pressure liquid chromatography (HPLC) to enable the ozonolysis of low abundance lipids. We applied these new capabilities to define the lipid structures in antimicrobial resistant (AMR) and antimicrobial susceptible (AMS) biothreat organism Yersinia pestis and cells infected with Severe Acute Respiratory Syndrome coronavirus 2 (SARS-CoV-2) variants.

59 BASIC BIOLOGICAL SCIENCES↗

A Generalization of Threshold-Based and Probability-Based Models of Information Diffusion

Diffusion of information through complex networks is of interest in studies such as propagation prediction and influence maximization, both of which have applications in viral marketing and rumor controlling. There are a variety of information diffusion models, all of which simulate the adoption and spread of information over time. However, there is a lack of understanding of whether, despite their conceptual differences, these models represent the same underlying generative structures. For instance, if two different models utilize different conceptual mechanisms, but generate the same results, does the choice of model matter? A classification of diffusion of information models is developed based on the neighbor knowledge of the model infection requirement and the stochasticity of the model. This classification allows for the identification of models that fall into each respective category. The study involves the analysis of the following agent-based models on directed scale-free networks: (1) a linear absolute threshold model (LATM), (2) a linear fractional threshold model (LTFM), (3) the independent cascade model (ICM), (4) Bass-Rand-Rust model (BRRM) (5) a stochastic linear absolute threshold model (SLATM) (6) a stochastic fractional threshold model (SLFTM), and (7) Dodds–Watts model (DWM). Through the execution of simulations and analysis of the experimental results, the distinctive properties of each model are identified. Our analysis reveals that similarity in conceptual design does not imply similarity in behavior concerning speed, final state of nodes and edges, and sensitivity to parameters. Therefore, we highlight the importance of considering the unique behavioral characteristics of each model when selecting a suitable information diffusion model for a particular application.

97 MATHEMATICS AND COMPUTING↗

Robotics Technologies on Knowledge Management Information Tool (KM-IT) Platform - 16465

The Knowledge Management Information Tool (KM-IT) is a web-based system developed to maintain and preserve the deactivation and decommissioning (D and D) knowledge base across the Department of Energy (DOE) complex. The system was developed by the Applied Research Center (ARC) at Florida International University (FIU) with the support of the D and D community, including the DOE Office of Environmental Management (DOE EM), and with the active collaboration and support of the DOE's Energy Facility Contractors Group (EFCOG). The KM-IT system is a D and D community driven system tailored to serve the technical issues faced by the D and D workforce across the DOE Complex. New information, including vendors and technologies related to D and D, are researched and added to KM-IT on an ongoing basis. In late 2014, DOE EM provided a database of 471 robotic technologies, originally developed by NuVision Engineering and Cogentus Consulting, with a request to evaluate the potential for integrating the data into the KM-IT framework for ongoing hosting/maintenance of the information. All of the data from the original database as well as photographs, documents, and videos are now available on KM-IT. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Methods and algorithms for computer synthesis of holographic elements to obtain a complex impulse response of optical information processing systems based on modern spatial light modulators

The possibilities of designing optical devices for data processing and imaging based on the manipulation of coherent light beams by means of spatial light modulators (SLMs) are investigated. A review of commercially available SLMs is presented and the limitations of their complex modulation characteristics are analysed. The main problem of using present-day SLMs is the lack of the ability to modulate directly all states within a unit circle in the complex plane. In this regard, the characteristics of current methods for the synthesis of holographic elements are described that implement a given complex impulse response of the optical system and are optimal for using SLMs with purely amplitude, purely phase, and hybrid amplitude – phase modulation. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Gamma-ray probes of dark matter substructure

The substructure content of dark matter halos is interesting because it can be affected by complex galaxy physics and dark matter particle physics. However, observing the small scale structure of dark matter is a challenge. The subhalo abundance (mass function, minimum mass) and morphology (density profile, subhalo shape, subsubstructure) contain information about complex astrophysics (halo formation processes) and new exotic fundamental physics (dark matter interactions). Indirect detection of dark matter annihilation radiation (DMAR) in gamma rays may be the most direct method for observing small scale structure. I outline the ways in which gamma rays may probe halo substructure. If substructure is bountiful, it may be responsible for the eventual discovery of DMAR, for instance in galaxy clusters or the diffuse gamma-ray background. Otherwise, the observation of DMAR in places without much substructure, such as the Galactic center, would lead to strict limits on the properties of small scale structure. Properties of the gamma-ray angular power spectrum will also provide information or constraints on Milky Way halo substructure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Incorporation of Pump-and-Treat Data in the New Tracking Restoration and Closure (TRAC)Web-Based Mapping Tool - 20339

Groundwater pump-and-treat (P and T) systems are a common remediation strategy for sites with contaminated groundwater within the U.S. Department of Energy (DOE) Office of Environmental Management (EM). Currently, there are six DOE-EM sites with active P and T systems, but integrated information on individual systems is only primarily available in separate annual reports. To provide a broad view of both current and historical P and T operations, data has been collected on all of the P and T systems. This summary information not only includes capital and average annual costs, but also identifies contaminants treated and forecasted P and T closure dates. Principal contaminants of concern treated with P and T systems include trichloroethylene, chromium (VI), strontium-90, technetium-99, and uranium. DOE-EM is continuing to create a web-based mapping tool that compiles information on groundwater contaminants, remediation strategies and, current data related to plumes and cleanup progress within all DOE-EM sites. The information collected on P and T systems will be added to the TRAC (Tracking Restoration and Closure) tool using interactive maps to quickly access and share information. This information sharing supports the transition from active to passive remediation methods and long-term monitoring approaches. TRAC can ensure that managers, stakeholders, regulators, and contractors remain up to date on cleanup progress for all sites within the complex. The information on P and T systems expands the use of TRAC and can assist in project monitoring and budget planning and support potential shifts in management plans based on plume data. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

What more can be done with XPS? Highly informative but underused approaches to XPS data collection and analysis

Because of the importance of surfaces and interfaces in many scientific and technological areas, the use of x-ray photoelectron spectroscopy (XPS) has been growing exponentially. Although XPS is being used to obtain useful information about the surface composition of samples, much more information about materials and their properties can be extracted from XPS data than commonly obtained. This paper describes some of the areas where alternative analysis methods or experimental design can obtain information about the near-surface region of a sample, often information not available in other ways. Experienced XPS analysts are familiar with many of these methods, but they may not be known to new or casual XPS users, and sometimes, they have not been used because of an inappropriately assumed complexity. The information available includes optical, electronic, and electrical properties; nanostructure; expanded chemical information; and enhanced analysis of biological materials and solid/liquid interfaces. Many of these analyses can be conducted on standard laboratory XPS systems, with either no or relatively minor system alterations. Topics discussed include (1) considerations beyond the “traditional” uniform surface layer composition calculation, (2) using the Auger parameter to determine a sample property, (3) use of the D parameter to identify sp 2 and sp 3 carbon information, (4) information from the XPS valence band, (5) using cryocooling to expand range of samples that can be analyzed and minimize damage, and (6) using electrical potential effects on XPS signals to extract chemically resolved electrical measurements including band alignment and electrical property information.

Baer, Donald R. [Pacific Northwest National Labora↗

Basic Research of Intrinsic Tamper Indication Markings and Patterns Defined by Pulsed Laser Irradiation (Final Report)

Pulsed laser irradiation has been used to create complex, intrinsic markings that can be used as unique identifiers for authentication and asset protection. Markings have been made on the surface of various materials by rapidly scanning a focused laser beam across a designated area as large as several square inches. Markings include macro-scale patterns, such as barcodes, that contain encrypted information. More complex markings are comprised of macro-scale patterns and embedded, unique micro-scale features. Micro-scale features form spontaneously during scanned laser irradiation and have different shapes, spacings, color and other characteristics that are virtually impossible to recreate. The macro-scale patterns can be interrogated rapidly in the field using a digital camera, while the embedded micro-scale features are best evaluated in the laboratory using microscopy or related optical techniques. Interrogated markings are compared with archived maps of the original patterns (obtained at the time of their manufacture) to determine component authenticity. The majority of experiments have involved marking planar solids. A new instrument that marks non-planar substrates is described for future work.

36 MATERIALS SCIENCE↗

Analyzing critical material demand: A revised approach

Apparent consumption has been widely used as a metric to estimate material demand. However, with technology advancement and complexity of material use, this metric has become less useful in tracking material flows, estimating recycling feedstocks, and conducting life cycle analysis of critical materials. Here, we call for future research efforts to focus on building a multi-tiered consumption database for the global trade network of critical materials. This approach will help track how raw materials are processed into major components (e.g., motor assemblies) and eventually incorporated into complete pieces of equipment (e.g., wind turbines). Foreseeable challenges would involve: 1) difficulty in obtaining a comprehensive picture of trade partners due to business sensitive information, 2) complexity of materials going into components of a machine, and 3) maintaining such a database. We propose ways to address these challenges such as making use of digital design, learning from the experience of building other databases, and developing a strategy for financial sustainability. Additionally, we recommend that, with the advancement of information technology, small steps toward building such a database will contribute significantly to our understanding of material flows in our society and the associated human impacts on the environment.

54 ENVIRONMENTAL SCIENCES↗

Composing complex EXAFS problems with severe information constraints

In recent work, a model for the structural environment of Hg bound to a catalytic DNA sensor was proposed on the basis of EXAFS data analysis. Although severely constrained by limited data quality and scant supporting structural data, a compelling structural model was found which agreed with a similar but less detailed model proposed on the basis on NMR data. I discuss in detail the successes and limitations of the analytical strategy that were implemented in the earlier work. I then speculate on future software requirements needed to make this and similarly complex analytical strategies more available to the wider audience of EXAFS practitioners.

59 BASIC BIOLOGICAL SCIENCES↗

An artificial intelligence’s interpretation of complex high-resolution in situ transmission electron microscopy data

Complicated nano- and atomic-scale processes with sub-angstrom spatial resolution and millisecond time resolution visualized by in situ transmission electron microscopy (TEM) are often highly dynamical and time consuming to analyze and interpret. Here, we report how variational autoencoders (VAEs) can provide an artificial intelligence’s interpretation of high-resolution in situ TEM data by condensing and deconvoluting complicated atomic-scale dynamics into a latent space with reduced dimensionality. We designed a VAE model with high latent dimensions capable of deconvoluting information from complex high-resolution TEM data. We demonstrate how this model, with high latent dimensions trained on atomically resolved TEM images of lead sulfide (PbS) nanocrystals, is able to capture movements and perturbations of periodic lattices in both simulated and real in situ TEM data. Importantly, the VAE model shows the capability of detecting and deconvoluting dynamical nanoscale physical processes, such as the rotation of crystal lattices and intra-particle ripening during the annealing of semiconductor nanocrystals.

47 OTHER INSTRUMENTATION↗

Domain Adaptive Graph Neural Networks for Constraining Cosmological Parameters Across Multiple Data Sets

Deep learning models have been shown to outperform methods that rely on summary statistics, like the power spectrum, in extracting information from complex cosmological data sets. However, due to differences in the subgrid physics implementation and numerical approximations across different simulation suites, models trained on data from one cosmological simulation show a drop in performance when tested on another. Similarly, models trained on any of the simulations would also likely experience a drop in performance when applied to observational data. Training on data from two different suites of the CAMELS hydrodynamic cosmological simulations, we examine the generalization capabilities of Domain Adaptive Graph Neural Networks (DA-GNNs). By utilizing GNNs, we capitalize on their capacity to capture structured scale-free cosmological information from galaxy distributions. Moreover, by including unsupervised domain adaptation via Maximum Mean Discrepancy (MMD), we enable our models to extract domain-invariant features. We demonstrate that DA-GNN achieves higher accuracy and robustness on cross-dataset tasks. Using data visualizations, we show the effects of domain adaptation on proper latent space data alignment. This shows that DA-GNNs are a promising method for extracting domain-independent cosmological information, a vital step toward robust deep learning for real cosmic survey data.

79 ASTRONOMY AND ASTROPHYSICS↗

Bridging the Gap between Cosmological Simulations with Graph Neural Networks and Domain Adaptation

Deep learning models have been shown to outperform methods that rely on summary statistics, like the power spectrum, in extracting information from complex cosmological data sets. However, due to differences in the subgrid physics implementation and numerical approximations across different simulation suites, models trained on data from one cosmological simulation show a drop in performance when tested on another. Similarly, models trained on any of the simulations would also likely experience a drop in performance when applied to observational data. Training on data from two different suites of the CAMELS hydrodynamic cosmological simulations, we examine the generalization capabilities of Domain Adaptive Graph Neural Networks (DA-GNNs). By utilizing GNNs, we capitalize on their capacity to capture structured scale-free cosmological information from galaxy distributions. Moreover, by including unsupervised domain adaptation via Maximum Mean Discrepancy (MMD), we enable our models to extract domain-invariant features. We demonstrate that DA-GNN achieves higher accuracy and robustness on cross dataset tasks (up to 28% better relative error and up to almost an order of magnitude better χ 2 ). Using data visualizations, we show the effects of domain adaptation on proper latent space data alignment. This shows that DA-GNNs are a promising method for extracting domain-independent cosmological information, a vital step toward robust deep learning for real cosmic survey data.

97 MATHEMATICS AND COMPUTING↗