Search NASA⌕ Search

SEARCH · Search NASA

Results for “infrared interferometer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

The Palomar Testbed Interferometer

The Palomar Testbed Interferometer (PTI) is a long-baseline infrared interferometer located at Palomar Observatory, California. It was built as a testbed for interferometric techniques applicable to the Keck Interferometer. First fringes were obtained in 1995 July. PTI implements a dual-star architecture, tracking two stars simultaneously for phase referencing and narrow-angle astrometry. The three fixed 40 cm apertures can be combined pairwise to provide baselines to 110 m. The interferometer actively tracks the white-light fringe using an array detector at 2.2 microns and active delay lines with a range of +/-38 m. Laser metrology of the delay lines allows for servo control, and laser metrology of the complete optical path enables narrow-angle astrometric measurements. The instrument is highly automated, using a multiprocessing computer system for instrument control and sequencing.

Colavita, M. M.↗

Belt-zone variations in the Jovian cloud structure

Voyager Infrared Interferometer Spectrometer (IRIS) observations of Jupiter in the far infrared (180-1200/cm) are sensitive to emission originating from pressures less than 2 bars, while the 5-micrometer (1800-2300/cm) observations are primarily sensitive to emission originating from pressures greater than 2 bars. We use these differences in the location of the peak emission level to constrain the properties of the upper tropospheric cloud structure from the far-infrared observations and then use the 5-micrometer observations, with the upper tropospheric cloud structure fixed, to constrain the deep cloud structure. The relationship between observed 45- and 5-micrometer brightness temperatures reveals three distinct regions between +/- 25 deg latitude: North Equatorial Belt hot spots, which are 'hot' at both 45 and 5 micrometers; Equatorial Zone spectra, which are 'warm' at 45 micrometers and 'cold' at 5 micrometers; and North Tropical Zone spectra, which are 'cold' at both 45 and 5 micrometers. We find that the hot extreme spectral ensemble is unique to belts, and the cold extreme spectral ensembles are unique to zones, but that all other intermediate spectral ensembles are common to both regions. Analyses of these spectra using an anisotropic multiple scattering radiative transfer model reveal that the primary difference between belts and zones is the increased opacity and vertical extent of clouds in zones relative to their belt counterparts. In addition, we find a shift in the location of the para hydrogen gradient toward lower pressures in zones, with an increase in the 'equilibrated' cloud-top para fraction. We suggest that all of the variations in gas abundance profiles, temperature, and cloud structure are consistent with the effects of a simple mean circulation and large-scale wave motions.

Carlson, Barbara E.↗

Large Interferometer for Exoplanets (Life) I. Improved Exoplanet Detection Yield Estimates for A Large Mid-Infrared Space-Interferometer Mission

Context. One of the long-term goals of exoplanet science is the atmospheric characterization of dozens of small exoplanets in order to understand their diversity and search for habitable worlds and potential biosignatures. Achieving this goal requires a space mission of sufficient scale that can spatially separate the signals from exoplanets and their host stars and thus directly scrutinize the exoplanets and their atmospheres. Aims. We seek to quantify the exoplanet detection performance of a space-based mid-infrared (MIR) nulling interferometer that measures the thermal emission of exoplanets. We study the impact of various parameters and compare the performance with that of large single-aperture mission concepts detecting exoplanets in reflected light. Methods. We have developed an instrument simulator that considers all major astrophysical noise sources and coupled it with Monte Carlo of a synthetic exoplanet population around main-sequence stars within 20 pc. This allows us to quantify the number (and types) of exoplanets that our mission concept could detect over a certain time period. Two different scenarios to distribute the observing time among the stellar targets are discussed and different apertures sizes and wavelength ranges are considered. Results. An interferometer consisting of four 2 m apertures working in the 4–18.5 μ.m wavelength range with a total instrument throughput of 5% could detect up to ≈550 exoplanets with radii between 0.5 and 6 R ⊕ with an integrated S/N ≥ 7. At least ≈160 of the detected exoplanets have radii ≤1.5 R ⊕ . Depending on the observing scenario, ≈25–45 rocky exoplanets (objects with radii between 0.5 and 1.5 R ⊕ ) orbiting within the empirical habitable zone (eHZ) of their host stars are among the detections. With four 3.5 m apertures, the total number of detections can increase to up to ≈770, including ≈60–80 rocky eHZ planets. With four times 1 m apertures, the maximum detection yield is ≈315 exoplanets, including ≤20 rocky eHZ planets. The vast majority of small, temperate exoplanets are detected around M dwarfs. The impact of changing the wavelength range to 3–20 μm or 6–17 μm on the detection yield is negligible. Conclusions. A large space-based MIR nulling interferometer will be able to directly detect hundreds of small, nearby exoplanets, tens of which would be habitable world candidates. In terms of predicted detection yield, such a mission can compete with large single-aperture reflected light missions. Given that we assumed only 2.5 years for the search phase, a significant sub-set of the detected exoplanets can be followed-up in a second mission phase to obtain high SNR thermal emission spectra, leveraging the superior diagnostic power of the MIR wavelength regime compared to shorter wavelengths.

planets and satellites: terrestrial planets↗

Interferometer Designs for the Terrestrial Planet Finder

The Terrestrial Planet Finder (TPF) is a space-based infrared interferometer that will combine high sensitivity and spatial resolution to detect and characterize planetary systems within 15 pc of our sun. TPF is a key element in NASA's Origins Program and is currently un- der study in its Pre-Project Phase. We review some of the interferometer designs that have been considered for starlight nulling, with particular attention to the architecture and subsystems of the central beam-combiner.

Lawson, P. R.↗

Interferometer Designs for the Terrestrial Planet Finder

The Terrestrial Planet Finder (TPF) is a space-based infrared interferometer that will combine high sensitivity and spatial resolution to detect and characterize planetary systems within 15 pc of our sun. TPF is a key element in NASA's Origins Program and is currently under study in its Pre-Project Phase. We review some of the interferometer designs that have been considered for starlight nulling, with particular attention to the architecture and subsystems of the central beam-combiner.

Lawson, P. R.↗

Fourier emission infrared microspectrophotometer for surface analysis. I - Application to lubrication problems

A far-infrared interferometer was converted into an emission microspectrophotometer for surface analysis. To cover the mid-infrared as well as the far-infrared the Mylar beamsplitter was made replaceable by a germanium-coated salt plate, and the Moire fringe counting system used to locate the moveable Michelson mirror was improved to read 0.5 micron of mirror displacement. Digital electronics and a dedicated minicomputer were installed for data collection and processing. The most critical element for the recording of weak emission spectra from small areas was, however, a reflecting microscope objective and phase-locked signal detection with simultaneous referencing to a blackbody source. An application of the technique to lubrication problems is shown.

Lauer, J. L.↗

Indirect planet detection with ground-based long-baseline interferometry

Narrow-angle astrometry with long-baseline infrared interferometers can provide extremely high accuracies as required for indirect planet detection. Narrow-angle astrometric interferometry exploits the properties of atmospheric turbulence over fields smaller than the interferometer baseline divided by the atmospheric scale height. For such fields, accuracy is linear with star separation, and nearly inversely proportional to baseline length. To exploit these properties, the interferometer observes a relatively bright (less than 13 mag(sub K)) target in the near infrared at 2.2 micrometers, and uses phase referencing to find a reference star within the 2.2-micrometers isoplanatic patch. With this technique faint references can be found for most targets. With baselines greater than 100 m, which also minimize photon-noise errors, and with careful control of systematic errors by using laser metrology, accuracies of tens of microarcseconds/square root of (hour) should be possible.

Colavita, M. M.↗

Organic Ices in Titan's Stratosphere

Titan’s stratospheric ice clouds are by far the most complex of any observed in the solar system, with over a dozen organic vapors condensing out to form a suite of pure and co-condensed ices, typically observed at high winter polar latitudes. Once these stratospheric ices are formed, they will diffuse throughout Titan’s lower atmosphere and most will eventually precipitate to the surface, where they are expected to contribute to Titan’s regolith. Early and important contributions were first made by the InfraRed Interferometer Spectrometer (IRIS) on Voyager 1, followed by notable contributions from IRIS’ successor, the Cassini Composite InfraRed Spectrometer (CIRS), and to a lesser extent, from Cassini’s Visible and Infrared Mapping Spectrometer (VIMS) and the Imaging Science Subsystem (ISS) instruments. All three remote sensing instruments made new ice cloud discoveries, combined with monitoring the seasonal behaviors and time evolution throughout Cassini’s 13-year mission tenure. A significant advance by CIRS was the realization that co-condensing chemical compounds can account for many of the CIRS-observed stratospheric ice cloud spectral features, especially for some that were previously puzzling, even though some of the observed spectral features are still not well understood. Relevant laboratory transmission spectroscopy efforts began just after the Voyager encounters, and have accelerated in the last few years due to new experimental efforts aimed at simulating co-condensed ices in Titan’s stratosphere. This review details the current state of knowledge regarding the organic ice clouds in Titan’s stratosphere, with perspectives from both observational and experimental standpoints.

Astronomy↗

Organic Ices in Titan's Stratosphere

Titan’s stratospheric ice clouds are by far the most complex of any observed in the solar system, with over a dozen organic vapors condensing out to form a suite of pure and co-condensed ices, typically observed at high winter polar latitudes. Once these stratospheric ices are formed, they will diffuse throughout Titan’s lower atmosphere and most will eventually precipitate to the surface, where they are expected to contribute to Titan’s regolith. Early and important contributions were first made by the InfraRed Interferometer Spectrometer (IRIS) on Voyager 1, followed by notable contributions from IRIS’ successor, the Cassini Composite InfraRed Spectrometer (CIRS), and to a lesser extent, from Cassini’s Visible and Infrared Mapping Spectrometer (VIMS) and the Imaging Science Subsystem (ISS) instruments. All three remote sensing instruments made new ice cloud discoveries, combined with monitoring the seasonal behaviors and time evolution throughout Cassini’s 13-year mission tenure. A significant advance by CIRS was the realization that co-condensing chemical compounds can account for many of the CIRS-observed stratospheric ice cloud spectral features, especially for some that were previously puzzling, even though some of the observed spectral features are still not well understood. Relevant laboratory transmission spectroscopy efforts began just after the Voyager encounters, and have accelerated in the last few years due to new experimental efforts aimed at simulating co-condensed ices in Titan’s stratosphere. This review details the current state of knowledge regarding the organic ice clouds in Titan’s stratosphere, with perspectives from both observational and experimental standpoints.

C. M. Anderson↗

Organic Ices in Titan’s Stratosphere

Titan’s stratospheric ice clouds are by far the most complex of any observed in the solar system, with over a dozen organic vapors condensing out to form a suite of pure and co-condensed ices, typically observed at high winter polar latitudes. Once these stratospheric ices are formed, they will diffuse throughout Titan’s lower atmosphere and most will eventually precipitate to the surface, where they are expected to contribute to Titan’s regolith. Early and important contributions were first made by the InfraRed Interferometer Spectrometer (IRIS) on Voyager 1, followed by notable contributions from IRIS’ successor, the Cassini Composite InfraRed Spectrometer (CIRS), and to a lesser extent, from Cassini’s Visible and Infrared Mapping Spectrometer (VIMS) and the Imaging Science Subsystem (ISS) instruments. All three remote sensing instruments made new ice cloud discoveries, combined with monitoring the seasonal behaviors and time evolution throughout Cassini’s 13-year mission tenure. A significant advance by CIRS was the realization that co-condensing chemical compounds can account for many of the CIRS-observed stratospheric ice cloud spectral features, especially for some that were previously puzzling, even though some of the observed spectral features are still not well understood. Relevant laboratory transmission spectroscopy efforts began just after the Voyager encounters, and have accelerated in the last few years due to new experimental efforts aimed at simulating co-condensed ices in Titan’s stratosphere. This review details the current state of knowledge regarding the organic ice clouds in Titan’s stratosphere, with perspectives from both an observational and experimental standpoint.

Ices↗

The Wide-Field Spatio-Spectral Interferometer: System Overview, Data Synthesis and Analysis

The Wide-field Imaging Interferometry Testbed (WIIT) is a double Fourier (DF) interferometer operating at optical wavelengths, and provides data that are highly representative of those from a space-based far-infrared interferometer like SPIRIT. We have used the testbed to observe both geometrically simple and astronomically representative test scenes. Here we present an overview of the astronomical importance of high angular resolution at the far infrared, followed by the description of the optical set-up of WIIT, including the source simulator CHIP (Calibrated Hyperspectral Image Projector). We describe our synthesis algorithms used in the reconstruction of the input test scenes via a simulation of the most recent measurements. The updated algorithms, which include instruments artifacts that allow the synthesis of DF experimental data, are presented and the most recent results analyzed.

Juanola-Parramon, Roser↗

Retrieval of temperature profiles from Martian infrared spectra

In theory, a thermal emission spectrum of Mars (220-1600 cm(exp -1)) contains a wealth of information about the composition and thermal structure of the atmosphere and surface. However, in practice, the ability to retrieve quantitative information from the spectrum is limited by a number of factors including (1) the ill-posed nature of the spectral inversion problem and the resulting nonuniqueness of all solutions; (2) assumptions built into any spectral inversion program; (3) uncertainties in surface pressure, temperature, and emissivity; and (4) uncertainties in the optical properties of atmospheric aerosols. Below, factors (1) and (2) are discussed as fundamental limitations on temperature retrievals from Mariner 9 Infrared Interferometer Spectrometer (IRIS) spectra. In preparation for the Mars Observer mission and the return of tens of thousands of infrared spectra per day from the Thermal Emission Spectrometer (TES), we have developed a fast inversion algorithm to retrieve temperature structure and aerosol opacity from the infrared spectra. The derived atmospheric models will be used to provide the atmospheric contribution to the TES spectra, so that the thermal emission spectra of the underlying surface can be determined for making mineralogical identifications. As a test of our algorithm, we are undertaking a systematic analysis of the entire Mariner 9 Infrared Interferometric Spectrometer (IRIS) dataset of 21,000 plus spectra. While portions of the IRIS dataset have been previously analyzed, the lack of a speedy and robust algorithm to invert the IRIS spectra to retrieve temperature profiles and aerosol opacities has been a major impediment to a truly comprehensive analysis.

Mcmillan, W. Wallace↗

Determination of stratospheric temperature and height gradients from Nimbus 3 radiation data

To improve the specification of stratospheric, horizontal, temperature and geopotential height fields needed for high-flying aircraft, we derived a technique to estimate data between satellite tracks using interpolated infrared interferometer spectrometer 15-micron radiation data from Nimbus 3. The interpolation is based on the observed gradients of the medium resolution infrared 15-micron radiances between subsatellite tracks. The technique was verified with radiosonde data taken within 6 hr of the satellite data. Comparison indicates that the technique developed here produces analyses that are in general agreement with those from radiosonde data. In addition, this technique provides details over areas of sparse data not shown by conventional techniques.

Nicholas, G. W.↗

Detection of Propene in Titan's Stratosphere

The Voyager 1 flyby of Titan in 1980 gave a first glimpse of the chemical complexity of Titan's atmosphere, detecting many new molecules with the infrared interferometer spectrometer (IRIS). These included propane (C3H8) and propyne (CH3C2H), while the intermediate-sized C3Hx hydrocarbon (C3H6) was curiously absent. Using spectra from the Composite Infrared Spectrometer on Cassini, we show the first positive detection of propene (C3H6) in Titan's stratosphere (5(sigma) significance), finally filling the three-decade gap in the chemical sequence. We retrieve a vertical abundance profile from 100-250 km, that varies slowly with altitude from 2.0 +/- 0.8 ppbv at 125 km, to4.6 +/- 1.5 ppbv at 200 km. The abundance of C3H6 is less than both C3H8 and CH3C2H, and we remark on an emerging paradigm in Titans hydrocarbon abundances whereby alkanes greater than alkynes greater than alkenes within the C2Hx and C3Hx chemical families in the lower stratosphere. More generally, there appears to be much greater ubiquity and relative abundance of triple-bonded species than double-bonded, likely due to the greater resistance of triple bondsto photolysis and chemical attack.

Titan↗

An Investigation of the Correlation of Water-Ice and Dust Retrievals Via the MGS TES Data Set

Water-ice in the Martian atmosphere was first identified in the Mariner 9 Infrared Interferometer Spectrometer (IRIS) spectra. The Viking Imaging Subsystem (VIS) instruments aboard the Viking orbiter also observed water-ice clouds and hazes in the Martian atmosphere. The MGS TES instrument is an infrared inferometer/spectrometer which covers the spectral range 6-50 micron with a selectable sampling resolution of either 5 or 10 per cm. Using the relatively independent and distinct spectral signatures for dust and water-ice, these two retrieved quantities have been retrieved simultaneously. Although the interrelations among the two quantities have been analyzed by Smith et al. and the retrievals are thought to be robust, understanding the impact of each quantity on the other during their retrievals as well as the impact from the surface for retrievals is important for correctly interpreting the science, and therefore requires close examination. An understanding of the correlation or a-correlation between dust and water-ice would aid in understanding the physical processes responsible for the transport of aerosols in the Martian atmosphere. In this presentation, we present an investigation of the correlation between water-ice and dust in the MGS TES data set.

Qu, Z.↗