Search NASA⌕ Search

SEARCH · Search NASA

Results for “inputs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Historical Land Management Alters New Soil Carbon Inputs by Annual and Perennial Bioenergy Crops

Bioenergy and bioproduct markets are expanding to meet demand for climate-friendly goods and services. Perennial biomass crops are particularly well suited for this goal because of their high yields, low input requirements, and potential to increase soil carbon (C). However, it is unclear how much C is allocated into belowground pools by perennial bioenergy crops and whether the belowground benefits vary with nitrogen (N) fertilizer inputs. Using in situ 13 C pulse-chase labeling, we tested whether the sterile perennial grass Miscanthus × giganteus (miscanthus) or annual maize transfers more photosynthetic C to belowground pools. The experiment took place at two sites in Central and Northwest (NW) Iowa with different management histories and two nitrogen (N) fertilizer rates (0 and 224 kg N ha −1 year −1 ) to determine if the fate of plant-derived soil C depends on soil fertility and crop type (perennial or annual). Maize allocated a greater percentage of total new 13 C to roots than miscanthus, but miscanthus had greater new 13 C in total and belowground plant biomass. We found strong interactions between site and most soil measurements—including new 13 C in mineral and particulate soil organic matter (SOM) pools—which appears to be driven by differences in historical fertilizer management. The NW Iowa site, with a history of manure inputs, had greater plant-available nutrients (phosphorus, potassium, and ammonium) in soils, and resulted in less 13 C from miscanthus in SOM pools compared to maize (approximately 64% less in POM and 70% less in MAOM). In more nutrient-limited soils (Central site), miscanthus transferred 4.5 times more 13 C than maize to the more stable mineral-associated SOM pool. Our results suggest that past management, including historical manure inputs that affect a site's soil fertility, can influence the net C benefits of bioenergy crops.

13C↗
DOE OSTI2024

Rhizosphere microbial community structure in high-producing, low-input switchgrass families

Switchgrass ( Panicum virgatum L.) is a native, low-input North American perennial crop primarily grown for bioenergy, livestock forage, and industrial fiber. To achieve no-input switchgrass production that meets biomass needs, several switchgrass genotypes have been identified that have a low or negative response to nitrogen fertilizer, i . e ., the biomass accumulation with added nitrogen is less than or equal to that when grown without nitrogen. In order to improve the viability of low-input switchgrass production, a more detailed understanding of the biogeochemical mechanisms active in these select genotypes is needed. 16S and ITS amplicon sequencing and qPCR of key functional genes were applied to switchgrass rhizospheres to elucidate microbial community structure in high-producing, no-input switchgrass families. Rhizosphere microbial community structure differed strongly between sites, and nitrogen responsiveness.

Stonoha-Arther, Christina (ORCID:0000000263964507)↗
DOE OSTI2025

Machine learning model inputs, outputs, and scripts associated with “Artificial intelligence-guided iterations between observations and modeling significantly improve environmental predictions”

NOTE: The manuscript associated with this data package is currently in review. The data may be revised based on reviewer feedback. Upon manuscript acceptance, this data package will be updated with the final dataset and additional metadata. This data package is associated with the manuscript “Artificial intelligence-guided iterations between observations and modeling significantly improve environmental predictions” (Malhotra et al., in prep). This effort was designed following ICON (integrated, coordinated, open, and networked) principles to facilitate a model-experiment (ModEx) iteration approach, leveraging crowdsourced sampling across the contiguous United States (CONUS). New machine learning models were created every month to guide sampling locations. Data from the resulting samples were used to test and rebuild the machine learning models for the next round of sampling guidance. Associated sediment and water geochemistry and in situ sensor data can be found at https://data.ess-dive.lbl.gov/datasets/doi:10.15485/1923689, https://data.ess-dive.lbl.gov/datasets/doi:10.15485/1729719, and https://data.ess-dive.lbl.gov/datasets/doi:10.15485/1603775. This data package is associated with two GitHub repositories found at https://github.com/parallelworks/dynamic-learning-rivers and https://github.com/WHONDRS-Hub/ICON-ModEx_Open_Manuscript. In addition to this readme, this data package also includes two file-level metadata (FLMD) files that describes each file and two data dictionaries (DD) that describe all column/row headers and variable definitions. This data package consists of two main folders (1) dynamic-learning-rivers and (2) ICON-ModEx_Open_Manuscript which contain snapshots of the associated GitHub repositories. The input data, output data, and machine learning models used to guide sampling locations are within dynamic-learning-rivers. The folder is organized into five top-level directories: (1) “input_data” holds the training data for the ML models; (2) “ml_models” holds machine learning (ML) models trained on the data in “input_data”; (3) “examples” contains files for direct experimentation with the machine learning model, including scripts for setting up “hindcast” run; (4) “scripts” contains data preprocessing and postprocessing scripts and intermediate results specific to this data set that bookend the ML workflow; and (5) “output_data” holds the overall results of the ML model on that branch. Each trained ML model resides on its own branch in the repository; this means that inputs and outputs can be different branch-to-branch. There is also one hidden directory “.github/workflows”. This hidden directory contains information for how to run the ML workflow as an end-to-end automated GitHub Action but it is not needed for reusing the ML models archived here. Please see the top-level README.md in the GitHub repository for more details on the automation. The scripts and data used to create figures in the manuscript are within ICON-ModEx_Open_Manuscript. The folder is organized into four folders which contain the scripts, data, and pdf for each figure. Within the “fig-model-score-evolution” folder, there is a folder called “intermediate_branch_data” which contains some intermediate files pulled from dynamic-learning-rivers and reorganized to easily integrate into the workflows. NOTE: THIS FOLDER INCLUDES THE FILES AT THE POINT OF PAPER SUBMISSION. IT WILL BE UPDATED ONCE THE PAPER IS ACCEPTED WITH ANY REVISIONS AND WILL INCLUDE A DD/FLMD AT THAT POINT. We thank the United States Forest Service, Washington Department of Fish and Wildlife, Washington Department of Natural Resources, Cowiche Canyon Conservatory, Washington State Parks and Recreation Commission (Scientific Research Permit #210901), and the Confederated Tribes and Bands of the Yakama Nation for access to field locations where the samples labeled “SSS” were collected. We also thank the Yakama Nation Tribal Council and Yakama Nation Fisheries for working with us to facilitate sample collection and optimization of data usage according to their values and worldview. WHONDRS consortium members were asked to provide any acknowledgments for the collection of samples labeled “CM” and the following is a list of acknowledgments that were submitted with their corresponding Site IDs: (MART) Research activities were conducted in part on the Wind River Experimental Forest within the Gifford Pinchot National Forest; (MP- 100379) Philadelphia is part of Lenapehoking, the ancestral homelands of the Lenape peoples; (MP-102398) Land surveyed is the ancestral homelands of the Nookhose'iinenno (Arapaho), Tsis tsis'tas (Cheyenne), and Nuuchu (Ute); (MP-100749 and MP- 100747) Georgia Coastal Ecosystem LTER, OCE-1832178; (SP-70 and SP-72) Eastern Shoshone, Shoshone-Bannock; (MP- 102944) Funded by Oregon Watershed Enhancement Board. On the traditional lands of the Confederated Tribes of the Siletz, Confederated Tribes of the Grand Rhonde, and the Clatsop-Nehalem Confederated Tribe; (MP- 100607) Holiday Creek is located on the traditional territory of the Monacan Indian Nation; (SP-45) Lafayette Blue Springs State Park; (MP-102420) NSF DEB-2016749; (MP-100019) New Hampshire Agriculture Experiment Station; (SP-35) Rayonier (land owner; https://www.rayonier.com/); (MP- 101276) US Department of Energy, Office of Science, Biological and Environmental Research, Subsurface Biogeochemical Research, Watershed Dynamics and Evolution SFA at ORNL; (MP- 103224) Watershed Dynamics and Evolution SFA at ORNL; (MP- 101584) Traditional lands of the Oceti Sakowin (Dakota, Lakota, Nakoda) and Anishinaabe Peoples.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Procedure for Creating, Reviewing, and Submitting Input Files into the Benchmark Library

Los Alamos National Laboratory (LANL) has a number of criticality benchmark input files, modeled for use with MCNP, developed and maintained by various organizations including the Nuclear Criticality Safety (NCS) Division, XCP-3, and XCP-5. The purpose of this procedure is to standardize input file creation, review, and maintenance. This procedure incorporates existing practices used by IRSN as documented in the original report and the translation from French in addition to practices used by the LANL NCS Division as documented in. The report relates to input files used for the validation of the continuous energy Monte Carlo code MCNP6 but is general enough to be extended to other codes. This report describes the procedure on how to prepare and use benchmarks (taken mainly from the ICSBEP Handbook) for the validation of calculation routes. In particular, this report describes the procedure to follow in the creation of the input files and their integration in the experimental validation databases.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

A Comparison of Adverse Meteorology Inputs for Emergency Management and Safety Basis Dispersion Modeling Applications at SRS

The MELCOR Accident Consequence Calculation System (MACCS), used for safety basis accident analyses at SRS, implements adjustment factors to consider the increased vertical turbulence associated with local surface roughness and the increased lateral turbulence associated with time-based plume meander. The two models used for SRS emergency planning radiological consequence assessment, i.e., Hotspot and Puff/Plume, currently do not have an option to input or apply diffusion adjustments for meander or surface roughness. Adverse meteorology conditions at SRS have been determined as E stability class and 1.3 meters per second wind speed for ground level releases. This is the input used for emergency planning models. Contrastingly safety basis analyses use a different input, representing adverse meteorology values as F stability class and wind speeds of 1.3 meters per second (for a ground level release). This results in an apparent discrepancy between the two approaches. In this report we document the differing modeling assumptions, discuss the logic behind each modeling approach used to represent local roughness and plume meander conditions, and numerically compare dispersion coefficients and concentration estimates obtained from each set of model inputs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Going under the hood of MontePy: A python API for MCNP input files [Slides]

MontePy is an open-source python software library for reading, editing, and writing MCNP input files. This presentation was given to a university research group interested in it. MontePy provides an object-oriented interface for working with these MCNP input files. It uses a lexer and parser system in order to create a concrete syntax tree representing the input from the input file.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Nutrient Inputs Stimulate Mercury Methylation by Syntrophs in a Subarctic Peatland

Climate change dramatically impacts Arctic and subarctic regions, inducing shifts in wetland nutrient regimes as a consequence of thawing permafrost. Altered hydrological regimes may drive changes in the dynamics of microbial mercury (Hg) methylation and bioavailability. Important knowledge gaps remain on the contribution of specific microbial groups to methylmercury (MeHg) production in wetlands of various trophic status. Here, we measured aqueous chemistry, potential methylation rates (k meth ), volatile fatty acid (VFA) dynamics in peat-soil incubations, and genetic potential for Hg methylation across a groundwater-driven nutrient gradient in an interior Alaskan fen. We tested the hypotheses that (1) nutrient inputs will result in increased methylation potentials, and (2) syntrophic interactions contribute to methylation in subarctic wetlands. We observed that concentrations of nutrients, total Hg, and MeHg, abundance of hgcA genes, and rates of methylation in peat incubations (k meth ) were highest near the groundwater input and declined downgradient. hgcA sequences near the input were closely related to those from sulfate-reducing bacteria (SRB), methanogens, and syntrophs. Hg methylation in peat incubations collected near the input source (FPF2) were impacted by the addition of sulfate and some metabolic inhibitors while those down-gradient (FPF5) were not. Sulfate amendment to FPF2 incubations had higher k meth relative to unamended controls despite no effect on k meth from addition of the sulfate reduction inhibitor molybdate. The addition of the methanogenic inhibitor BES (25 mM) led to the accumulation of VFAs, but unlike molybdate, it did not affect Hg methylation rates. Rather, the concurrent additions of BES and molybdate significantly decreased k meth , suggesting a role for interactions between SRB and methanogens in Hg methylation. The reduction in k meth with combined addition of BES and molybdate, and accumulation of VFA in peat incubations containing BES, and a high abundance of syntroph-related hgcAsequences in peat metagenomes provide evidence for MeHg production by microorganisms growing in syntrophy. Collectively the results suggest that wetland nutrient regimes influence the activity of Hg methylating microorganisms and, consequently, Hg methylation rates. Our results provide key information about microbial Hg methylation and methylating communities under nutrient conditions that are expected to become more common as permafrost soils thaw.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Historical land management alters new soil carbon inputs by annual and perennial bioenergy crops

Bioenergy and bioproduct markets are expanding to meet demand for climate friendly goods and services. Perennial biomass crops are particularly well suited for this goal because of their high yields, low input requirements, and potential to increase soil carbon (C). However, it is unclear how much C is allocated into belowground pools by perennial bioenergy crops and whether the belowground benefits vary with nitrogen (N) fertilizer inputs. Using in situ 13C pulse-chase labeling, we tested whether the sterile perennial grass Miscanthus × giganteus ( miscanthus ) or annual maize transfers more photosynthetic C to belowground pools. The experiment took place at two sites in Central and Northwest (NW) Iowa with different management histories and two nitrogen (N) fertilizer rates (0 and 224 kg N ha-1 yr-1) to determine if the fate of plant-derived soil C depends on soil fertility and crop type (perennial or annual). Maize allocated a greater percentage of total new 13C to roots than miscanthus, but miscanthus had greater new 13C in total and belowground plant biomass. We found strong interactions between site and most soil measurements – including new 13C in mineral and particulate soil organic matter (SOM) pools –which appear to be driven by differences in historical fertilizer management. The NW Iowa site, with a history of manure inputs, had greater plant-available nutrients (phosphorus, potassium, and ammonium) in soils, and resulted in less 13C from miscanthus in SOM pools compared to maize (approximately 64% less in POM and 70% less in MAOM). In more nutrient-limited soils (Central site), miscanthus transferred 4.5 times more 13C than maize to the more stable mineral-associated SOM pool. Our results suggest that past management, including historical manure inputs that affect a site’s soil fertility, can influence the net C benefits of bioenergy crops.

Keiser, Ashley [Stockbridge School of Agriculture,↗
DOE OSTI2025

Sensitivity analysis of numerical modeling input parameters on floating offshore wind turbine loads in extreme idling conditions

Abstract. Floating offshore wind turbine (FOWT) systems are subject to complex environmental loads, with significant potential for damage in extreme storm conditions. Design simulations in these conditions are required to assess the survivability of the device with some level of confidence. Aero-hydro-servo-elastic engineering tools can be used with a reasonable balance of accuracy and computational efficiency. The models require many input parameters to describe the air and water conditions, the system properties, and the load calculations. Each of these parameters has some possible range, due to either statistical uncertainty or variations with time. Variation in the input parameters can have important effects on the uncertainty in the resulting loads, but it is not practical to perform detailed assessments of the impact of this uncertainty for every input parameter. This work demonstrates a method to identify the input parameters that have the most impact on the loads to focus further inspection. The process is done specifically for extreme storm load cases defined in the International Electrotechnical Commission design requirements for floating offshore wind turbines. The analysis was performed using the International Energy Agency Wind 15 MW offshore reference wind turbine atop the University of Maine VolturnUS-S reference platform in two US offshore wind regions, the Gulf of Maine and Humboldt Bay. It was found that the direction of incident waves and current, yaw misalignment, and the length of mooring line sections were among the primary sensitivities.

17 WIND ENERGY↗
DOE OSTI2022

Providing Levelized Cost and Waiting Time Inputs for HDV Hydrogen Refueling Station Planning: A Case Study of U.S. I-75 Corridor

Widespread use of diesel fuels in freight transportation leads to greenhouse gas (GHG) emissions that play an important role in air pollution. The air pollution, as well as the energy crisis, drives the transition from diesel fuel to cleaner and more energy-efficient fuels such as hydrogen fuels. With such a transition, the strategic planning and optimization of supporting refueling infrastructure along the national highway for heavy-duty vehicles (HDVs) become a necessity. Cost and service level are two essential factors to be considered in hydrogen refueling station location and capacity optimization. The service level in this study is assessed by the delay (waiting time) at fueling stations as well as the fueling demand fulfilled. To this end, this study presents a methodology to provide waiting time (delay) and levelized hydrogen fuel cost inputs under different station configurations (number of dispensers and fill rates) for hydrogen refueling station planning. Determining the station configurations based on the trade-off between the two inputs is further discussed. Particularly, this study points out that the levelized cost and waiting time are affected by hourly demand patterns and estimates the two inputs under different peak hour fueling demand scenarios. The results suggest that, with the same daily demand, the cost, as well as the waiting time, increases obviously with the peak hour demand. In the case study, the cost grows at least 30% when the peak hour visit frequency of the daily total visits increases from 5% (evenly distributed pattern) to 10% (the most common pattern for existing diesel fueling stations along I-75). Accounting for this peak hour effect in hydrogen refueling station planning is recommended. Overall, the waiting time model and cost analysis provide key inputs for optimizing hydrogen refueling station location and configurations based on anticipated refueling demand patterns. The paper is the second in a series that aims to build a comprehensive modeling plan and optimize hydrogen refueling infrastructure along the Interstate 75 (I-75) corridor for HDVs.

Liu, Yuandong↗
DOE OSTI2023

Gramian-Based Characterization of Network Vulnerability to Nodal Impulse Inputs: Preprint

Impulsive inputs applied at influential nodes of a network system may result in undesirable behavior and degrade performance. This paper proposes the notion of vulnerability matrix (VM) to characterize the effect of impulse inputs on a network following either discrete-time or continuous-time dynamics. The VM describes the first-order effects of impulse inputs on edge flows and is based on the controllability Gramian. We provide explicit expressions for the elements of the vulnerability matrix for the class of directed line networks in terms of the edge weights. Simulations validate our results and highlight the utility of the proposed metric in capturing the transient effects of nodal impulse inputs on edge flows.

controllability Gramian↗
DOE OSTI2023

Detection of False Data Injection Attacks in Battery Stacks Using Input Noise-Aware Nonlinear State Estimation and Cumulative Sum Algorithms

Grid-scale battery energy storage systems (BESSs) are vulnerable to false data injection attacks (FDIAs), which could be used to disrupt state of charge (SoC) estimation. Inaccurate SoC estimation has negative impacts on system availability, reliability, safety, and the cost of operation. In this article a combination of a Cumulative Sum (CUSUM) algorithm and an improved input noise-aware extended Kalman filter (INAEKF) is proposed for the detection and identification of FDIAs in the voltage and current sensors of a battery stack. The series-connected stack is represented by equivalent circuit models, the SoC is modeled with a charge reservoir model and the states are estimated using the INAEKF. Further, the root mean squared error of the states’ estimation by the modified INAEKF was found to be superior to the traditional EKF. By employing the INAEKF, this article addresses the research gap that many state estimators make asymmetrical assumptions about the noise corrupting the system. Additionally, the INAEKF estimates the input allowing for the identification of FDIA, which many alternative methods are unable to achieve. The proposed algorithm was able to detect attacks in the voltage and current sensors in 99.16% of test cases, with no false positives. Utilizing the INAEKF compared to the standard EKF allowed for the identification of FDIA in the input of the system in 98.43% of test cases.

25 ENERGY STORAGE↗
DOE OSTI2024

Lyapunov-based nonlinear control of nonautonomous systems with individual input constraints

A control algorithm that can locally stabilize a specific class of multi-input multi-output nonautonomous nonlinear dynamical systems while satisfying individual input constraints is developed. The proposed Lyapunov-based state-feedback control law inherently accounts for the actuator amplitude saturation limits without the need for computationally expensive real-time optimization techniques. In addition to the control law, a formal definition for the local “controllable region” within which the controller can asymptotically drive the system states to the origin and satisfy the input saturation limits is also presented. The nonautonomous nature of the system dynamics implies that the “controllable region” continuously evolves with time. Therefore, a sufficient condition to maintain the system states within the “controllable region” is proposed in this work to make practical implementation feasible. The effectiveness of the controller is tested for a specific control problem arising in tokamaks, which are toroidal devices that use strong magnetic fields to confine a plasma (hot ionized gas). Here, the primary emphasis of tokamak research is to regulate the plasma properties around predetermined values to achieve stable plasma confinement. Nonlinear simulations show that the proposed controller can achieve the desired plasma control objectives in a DIII-D tokamak scenario.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Pilgrim Hot Springs: GEOPHIRES Inputs and Outputs for Direct-Use Geothermal District Heating and Cooling

This dataset includes files for a techno-economic analysis conducted using the GEOPHIRES simulator to examine the feasibility of expanding a larger district heating site in a remote location: Pilgrim Hot Springs, Alaska. Files included here are GEOPHIRES inputs and outputs for five different scenarios with varying demand, cycle, and system design characteristics to analyze. Also included is the link to the GEOPHIRES GitHub, as well as a link to the dataset that contains the energy modelling used to determine the heating demand for the district. For a list of the differences between scenarios, see the included "Input Overview.txt" file. Fields included in the input files are: subsurface technical parameters, surface technical parameters, financial parameters, capital and O&M parameters, as well as simulation parameters. The output files are case reports that summarize all equipment, reservoir characteristics, costs, and heating profiles.

15 GEOTHERMAL ENERGY↗
DOE OSTI2025

Robustness of Deep Learning Classification to Adversarial Input on GPUs: Asynchronous Parallel Accumulation Is a Source of Vulnerability

The ability of machine learning (ML) classification models to resist small, targeted input perturbations—known as adversarial attacks—is a key measure of their safety and reliability. We show that floating-point non associativity (FPNA) coupled with asynchronous parallel programming on GPUs is sufficient to result in misclassification, without any perturbation to the input. Additionally, we show that this misclassification is particularly significant for inputs close to the decision boundary and that standard adversarial robustness results may be overestimated up to 4.6 when not considering machine-level details. We first study a linear classifier, before focusing on standard Graph Neural Network (GNN) architectures and datasets used in robustness assessments. We develop a novel black-box attack using Bayesian optimization to discover external workloads that can change the instruction scheduling which bias the output of reductions on GPUs and reliably lead to misclassification. Motivated by these results, we present a new learnable permutation (LP) gradient-based approach to learning floating-point operation orderings that lead to misclassifications. The LP approach provides a worst-case estimate in a computationally efficient manner, avoiding the need to run identical experiments tens of thousands of times over a potentially large set of possible GPU states or architectures. Finally, using instrumentation-based testing, we investigate parallel reduction ordering across different GPU architectures under external background workloads, when utilizing multi-GPU virtualization, and when applying power capping. Our results demonstrate that parallel reduction ordering varies significantly across architectures under the first two conditions, substantially increasing the search space required to fully test the effects of this parallel scheduler-based vulnerability. These results and the methods developed here can help to include machine-level considerations into adversarial robustness assessments, which can make a difference in safety and mission critical applications.

Shanmugavelu, Sanjif [Maxeler Technologies, a Groq↗
DOE OSTI2025

An Analysis of Input Parameters for Film-Based Flash X-Ray Radiography

Flash X-ray radiography (flash) is a commonly used diagnostic technique in dynamic experiments. An analysis of the effects of input parameters on resulting metrics of image quality can aid the experimentalist in configuring the X-ray input parameters to produce the highest quality radiograph for a given experiment. Here, a flash X-ray test bed with HS800 film and a LANEX Medium F intensifier screen was used with an L3 450 kVp pulser and Scandiflash X-ray tube for this study. Input parameters including charge voltage, source filtering, and film-pack assembly were investigated for their impact on contrast-to-noise ratio (CNR), contrast, and contrast transfer function (CTF). Using VIDAR’s NDT Pro industrial film digitizer, scanner parameters such as optical density range, pixel spacing, scan mode, and digital bit-depth were also examined for their impact on image quality metrics. The highest CNR values were found with two LANEX intensifiers and no filtering. Charge voltage had no direct impact on CNR values. LANEX screen count and filtering resulted both in direct effects on CNR and interaction effects with each other and CNR value. Uncertainty bounds for CNR comparisons and repeatability of CTF evaluations are also discussed. Finally, the film results are compared with a previous study using other detector types, specifically Carestream INDUSTREX Flex GP, Flex HR, Flex XL Blue, and HPX-DR 3543.

dynamic radiography↗
DOE OSTI2020

Controls on the 36 Cl/Cl input ratio of paleo-groundwater in arid environments: New evidence from 81 Kr/Kr data

In this study, measurements of the long-lived 81 Kr and 36 Cl radioisotopes in groundwater from the Negev Desert (Israel) were used to assess the 36 Cl/Cl input ratios and Cl – contents for paleorecharge into the Nubian Sandstone Aquifer (NSA). The reconstructed Cl – content of the recharge flux was on the order of 300–400 mg/L. An initial 36 Cl/Cl ratio of 50 × 10 –15 was assessed for the groundwater replenishment in the Negev Desert since the late Pleistocene, in agreement with the 36 Cl/Cl ratios in recent local rainwater. This is despite possible changes in the climatic conditions and the 36 Cl production rates in the atmosphere over this timeframe. This similarity in values is explained by the major role played by the erosion and weathering of near-surface materials in the desert environment that dominate the hydrochemistry of rains, floods, and the consequent groundwater recharge. Spatial variation in the reconstructed initial 36 Cl/Cl ratio is accounted for by the differences in the mineral aerosol sources for specific recharge areas of the NSA. Accordingly, regional variations in the 36 Cl/Cl input in groundwater reservoirs surrounding the Mediterranean Sea indicate various processes that govern the 36 Cl/Cl system. Finally, the results of this study highlight the great advantage of integrating 81 Kr age information in evaluating the initial 36 Cl/Cl and Cl – input, which is essential for the calibration of 36 Cl radioisotope as an available long-term dating tool for a given basin.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Soil Carbon Stocks Not Linked to Aboveground Litter Input and Chemistry of Old-Growth Forest and Adjacent Prairie

The long-standing assumption that aboveground plant litter inputs have a substantial influence on soil organic carbon storage (SOC) and dynamics has been challenged by a new paradigm for SOC formation and persistence. We tested the importance of plant litter chemistry on SOC storage, distribution, composition, and age by comparing two highly contrasting ecosystems: an old-growth coast redwood (Sequoia sempervirens) forest, with highly aromatic litter, and an adjacent coastal prairie, with more easily decomposed litter. We hypothesized that if plant litter chemistry was the primary driver, redwood would store more and older SOC that was less microbially processed than prairie. Total soil carbon stocks to 110 cm depth were higher in prairie (35 kg C m —2 ) than redwood (28 kg C m —2 ). Radiocarbon values indicated shorter SOC residence times in redwood than prairie throughout the profile. Higher amounts of pyrogenic carbon and a higher degree of microbial processing of SOC appear to be instrumental for soil carbon storage and persistence in prairie, while differences in fine-root carbon inputs likely contribute to younger SOC in redwood. We conclude that at these sites fire residues, root inputs, and soil properties influence soil carbon dynamics to a greater degree than the properties of aboveground litter.

13C-NMR spectroscopy↗