Search NASA⌕ Search

SEARCH · Search NASA

Results for “instance selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Patient radiation dose audits for fluoroscopically guided interventional procedures

Purpose: Quality management for any use of medical x-ray imaging should include monitoring of radiation dose. Fluoroscopically guided interventional (FGI) procedures are inherently clinically variable and have the potential for inducing deterministic injuries in patients. The use of a conventional diagnostic reference level is not appropriate for FGI procedures. A similar but more detailed quality process for management of radiation dose in FGI procedures is described. Methods: A method that takes into account both the inherent variability of FGI procedures and the risk of deterministic injuries from these procedures is suggested. The substantial radiation dose level (SRDL) is an absolute action level (with regard to patient follow-up) below which skin injury is highly unlikely and above which skin injury is possible. The quality process for FGI procedures collects data from all instances of a given procedure from a number of facilities into an advisory data set (ADS). An individual facility collects a facility data set (FDS) comprised of all instances of the same procedure at that facility. The individual FDS is then compared to the multifacility ADS with regard to the overall shape of the dose distributions and the percent of instances in both the ADS and the FDS that exceed the SRDL. Results: Samples of an ADS and FDS for percutaneous coronary intervention, using the dose metric of reference air kerma (K{sub a,r}) (i.e., the cumulative air kerma at the reference point), are used to illustrate the proposed quality process for FGI procedures. Investigation is warranted whenever the FDS is noticeably different from the ADS for the specific FGI procedure and particularly in two circumstances: (1) When the facility's local median K{sub a,r} exceeds the 75th percentile of the ADS and (2) when the percent of instances where K{sub a,r} exceeds the facility-selected SRDL is greater for the FDS than for the ADS. Conclusions: Analysis of the two data sets (ADS and FDS) and of the percent of instances that exceed the SRDL provides a means for the facility to better manage radiation dose (and therefore both deterministic and stochastic radiation risk) to the patient during FGI procedures.

60 APPLIED LIFE SCIENCES↗

WE-G-BRD-06: Volumetric Cine MRI (VC-MRI) Estimated Based On Prior Knowledge for On-Board Target Localization

Purpose: To develop a technique to generate on-board VC-MRI using patient prior 4D-MRI, motion modeling and on-board 2D-cine MRI for real-time 3D target verification of liver and lung radiotherapy. Methods: The end-expiration phase images of a 4D-MRI acquired during patient simulation are used as patient prior images. Principal component analysis (PCA) is used to extract 3 major respiratory deformation patterns from the Deformation Field Maps (DFMs) generated between end-expiration phase and all other phases. On-board 2D-cine MRI images are acquired in the axial view. The on-board VC-MRI at any instant is considered as a deformation of the prior MRI at the end-expiration phase. The DFM is represented as a linear combination of the 3 major deformation patterns. The coefficients of the deformation patterns are solved by matching the corresponding 2D slice of the estimated VC-MRI with the acquired single 2D-cine MRI. The method was evaluated using both XCAT (a computerized patient model) simulation of lung cancer patients and MRI data from a real liver cancer patient. The 3D-MRI at every phase except end-expiration phase was used to simulate the ground-truth on-board VC-MRI at different instances, and the center-tumor slice was selected to simulate the on-board 2D-cine images. Results: Image subtraction of ground truth with estimated on-board VC-MRI shows fewer differences than image subtraction of ground truth with prior image. Excellent agreement between profiles was achieved. The normalized cross correlation coefficients between the estimated and ground-truth in the axial, coronal and sagittal views for each time step were >= 0.982, 0.905, 0.961 for XCAT data and >= 0.998, 0.911, 0.9541 for patient data. For XCAT data, the maximum-Volume-Percent-Difference between ground-truth and estimated tumor volumes was 1.6% and the maximum-Center-of-Mass-Shift was 0.9 mm. Conclusion: Preliminary studies demonstrated the feasibility to estimate real-time VC-MRI for on-board target localization before or during radiotherapy treatments. National Institutes of Health Grant No. R01-CA184173; Varian Medical System.

60 APPLIED LIFE SCIENCES↗

The mechanism for acetate formation in electrochemical CO (2) reduction on Cu: selectivity with potential, pH, and nanostructuring

Nanostructured Cu catalysts have increased the selectivities and geometric activities for high value C–C coupled (C 2 ) products (ethylene, ethanol, and acetate) in the electrochemical CO (2) reduction reaction (CO (2) RR). The selectivity among the high-value C 2 products is also altered, where for instance the yield of acetate increases with alkalinity and is dependent on the catalyst morphology. The reaction mechanisms behind the selectivity towards acetate vs. other C 2 products remain controversial. In this work, we elucidate the reaction mechanism for acetate formation by using ab initio simulations, a coupled kinetic-transport model, and loading dependent experiments. We find that trends in acetate selectivity can be rationalized from variations in electrolyte pH and the local mass transport properties of the catalyst and not from changes in Cu's intrinsic activity. The selectivity mechanism originates from the transport of ketene, a stable (closed shell) intermediate, away from the catalyst surface into solution where it reacts to form acetate. While this type of mechanism has not yet been discussed in the CO (2) RR, variants of it may explain similar selectivity fluctuations observed for other stable intermediates like CO and acetaldehyde. Our proposed mechanism suggests that acetate selectivity increases with increasing pH, decreasing catalyst roughness and significantly varies with the applied potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical device having electrolyte including disiloxane

One example of the disiloxanes include a backbone with a first silicon and a second silicon. The first silicon is linked to a first substituent selected from a group consisting of: a first side chain that includes a cyclic carbonate moiety; a first side chain that includes a poly(alkylene oxide) moiety; and a first cross link links the disiloxane to a second siloxane and that includes a poly(alkylene oxide) moiety. In some instance, the second silicon is linked to a second substituent selected from a group consisting of: a second side chain that includes a cyclic carbonate moiety, and a second side chain that includes a poly(alkylene oxide) moiety.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dumb-bell galaxies in southern clusters: Catalog and preliminary statistical results

The dominant galaxy of a rich cluster is often an object whose formation and evolution is closely connected to the dynamics of the cluster itself. Hoessel (1980) and Schneider et al. (1983) estimate that 50 percent of the dominant galaxies are either of the dumb-bell type or have companions at projected distances less than 20 kpc, which is far in excess of the number expected from chance projection (see also Rood and Leir 1979). Presently there is no complete sample of these objects, with the exception of the listing of dumb-bell galaxies in BM type I and I-II clusters in the Abell statistical sample of Rood and Leir (1979). Recent dynamical studies of dumb-bell galaxies in clusters (Valentijn and Casertano, 1988) still suffer from inhomogeneity of the sample. The fact that it is a mixture of optically and radio selected objects may have introduced an unknown biases, for instance if the probability of radio emission is enhanced by the presence of close companions (Stocke, 1978, Heckman et al. 1985, Vettolani and Gregorini 1988) a bias could be present in their velocity distribution. However, this situation is bound to improve: a new sample of Abell clusters in the Southern Hemisphere has been constructed (Abell et al., 1988 hereafter ACO), which has several advantages over the original northern catalog. The plate material (IIIaJ plates) is of better quality and reaches fainter magnitudes. This makes it possible to classify the cluster types with a higher degree of accuracy, as well as to fainter magnitudes. The authors therefore decided to reconsider the whole problem constructing a new sample of dumb-bell galaxies homogeneously selected from the ACO survey. Details of the classification criteria are given.

Vettolani, G.↗

Enhancement of the Extraction of Uranium from Seawater

Due to the limited uranium resources available for recovery through mining and ore processing and to the environmental problems associated with these operations, the future of nuclear power depends, to a large extent, on the feasibility of recovery of uranium from the ocean. While the amounts of uranium in the ocean are sufficient to fulfill the nuclear industry for many thousands of years, recovery of uranium from the ocean is hampered by its low concentration (3.3 parts per billion) and the presence of many other solutes in seawater at comparable or much higher concentrations. Thus, the only hope for economically viable recovery of uranium from the ocean lies in the development of adsorbents with high capacity and high selectivity for uranium as present in the seawater environment (pH 8.1, U(VI) oxidation state, anionic carbonate complexes). Moreover, it is quite unlikely that economically viable recovery of uranium could be achieved if the adsorbent could be used only once. Thus it is essential to develop adsorbents that can be used through multiple cycles of uranium adsorption followed by elution of the uranium to regenerate the adsorbent without significant degradation of their capacity and selectivity for uranium. Adsorbents used in the large majority of studies aimed at recovery of uranium from seawater are based on the use of radiation grafting to produce polymeric supports, in particular polyethylene, with attached amidoxime groups. This configuration has been concluded to offer the best candidate for use in recovery based on studies which were performed in the early 1980’s. Substantial progress has been made in improving the amidoxime-based adsorbents. The basic approach undertaken by the authors of the proposal, on the other hand, has been to test ligands which have not been included in the scoping studies of the 1980’s or have been developed since then. So far, 18 such ligands have been tested, of which three, including B2MP (an organic phosphate), DAOx (an organic oxalate), and Br-PADAP (an azo compound) have been selected for further investigation. In addition, Winged Nylon 6 has been identified as a promising polymeric support in view of its large surface area and high chemical stability. Furthermore, improved grafting techniques intended to achieve high grafting density under “green chemistry” conditions, i.e., in aqueous media, have been developed. These techniques include the use of surfactants to enhance the solubility of ligands in water and the use of a homopolymerization inhibitor to promote grafting rather than homopolymerization. Furthermore, unlike amidoxime-based adsorbents, which require a chemical treatment step following the radiation grafting to convert a nitrile group to amidoxime, the adsorbents developed by the authors do not require an additional step after grafting. Highly effective regeneration has been demonstrated for the phosphate-grafted polymeric adsorbent over at least 21 adsorption/elution cycles without significant loss of capacity. The currently proposed study is intended to build upon the progress made so far in developing alternative systems for removal of uranium from seawater. It will focus on the following objectives: Continued searches will be conducted for high-capacity, high-selectivity ligands based on systematic characterization of structural features favorable to uranium adsorption. (For instance, phosphates have been found to be much more effective than the corresponding phosphonates). At the same time, development and testing of the three ligands selected so far will continue, focusing on issues such as high grafting densities and effective regeneration. Testing will be conducted in non-spiked sweater (3.3 µg/L U) and lightly spiked seawater (up to 10 µg/L U). The authors have recently been able to refurbish an ICP-MS spectrometer for this purpose. Improved grafting techniques will be developed and refined for specific ligands. These techniques will include the use of surfactants to allow grafting of ligands with low solubility in water, the use of homopolymerization inhibitors, modifying the chemical structure of ligands to introduce C=C bonds, investigating possible modification of the surface of the polymeric support, and mechanistic analysis of the effects of grafting conditions, in particular accumulated dose and dose rate. Improvements in the characterization of adsorbents before and after contact with seawater will be implemented using techniques such as XPS, SEM-EDS, and zeta potential measurements to investigate the mechanism of uranium adsorption. Effective techniques of multi-cycle regeneration of promising adsorbents without degradation of their performance will be developed and refined through testing of mild, preferably near-neutral eluant solutions. The kinetics of adsorption and desorption of uranium will be investigated. This study is of great operational value and it will also greatly contribute to improved understanding of adsorption/desorption mechanism on promising adsorbents.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Observing the three-dimensional dynamics of supported metal complexes

Dynamics are intricately linked with activity and selectivity when it comes to catalysis, as noted for instance in the enzymatic principles of induced fit and allostery, and yet the range of motions heterogeneous catalytic sites are able to undergo is poorly understood. Solid-state nuclear magnetic resonance (NMR) spectroscopy is perhaps the only tool capable of probing the rapid conformational dynamics found in heterogeneous catalysts but has historically been restricted by its low sensitivity, limiting the detail with which structures can be resolved. In this work, we apply solid-state NMR and dynamic nuclear polarization, in combination with density functional theory modeling, to reveal the high-resolution structure and motional freedom of a scandium supported complex in three dimensions. The results are contrasted with the study of the analogous homoleptic complex in the crystalline state, highlighting the impacts that surface structure may have on the dynamics of supported complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

daft [SWR-17-53]

Daft is a Haskell library that implements the key constructs of relational algebra via static structural typing. Its DataCube typeclass supports selection, projection, aggregation, disaggregation, natural joins, semijoins, and antijoins. Instances of DataCube include both map- and function-based representations. An additional abstract data type provides Vinyl-style, keyed relational tables for which an embedded domain-specific language compactly represents relational operations. Utility types and functions support serialization to tab-separated-value data files, JSON arrays, MongoDB documents, and PostgreSQL tables, including automatic detection and verification of the schema for the input data.

Bush, BrianW.↗

Using expert systems to implement a semantic data model of a large mass storage system

The successful development of large volume data storage systems will depend not only on the ability of the designers to store data, but on the ability to manage such data once it is in the system. The hypothesis is that mass storage data management can only be implemented successfully based on highly intelligent meta data management services. There now exists a proposed mass store system standard proposed by the IEEE that addresses many of the issues related to the storage of large volumes of data, however, the model does not consider a major technical issue, namely the high level management of stored data. However, if the model were expanded to include the semantics and pragmatics of the data domain using a Semantic Data Model (SDM) concept, the result would be data that is expressive of the Intelligent Information Fusion (IIF) concept and also organized and classified in context to its use and purpose. The results are presented of a demonstration prototype SDM implemented using the expert system development tool NEXPERT OBJECT. In the prototype, a simple instance of a SDM was created to support a hypothetical application for the Earth Observing System, Data Information System (EOSDIS). The massive amounts of data that EOSDIS will manage requires the definition and design of a powerful information management system in order to support even the most basic needs of the project. The application domain is characterized by a semantic like network that represents the data content and the relationships between the data based on user views and the more generalized domain architectural view of the information world. The data in the domain are represented by objects that define classes, types and instances of the data. In addition, data properties are selectively inherited between parent and daughter relationships in the domain. Based on the SDM a simple information system design is developed from the low level data storage media, through record management and meta data management to the user interface.

Roelofs, Larry H.↗

Generative model selection using a scalable and size-independent complex network classifier

Real networks exhibit nontrivial topological features, such as heavy-tailed degree distribution, high clustering, and small-worldness. Researchers have developed several generative models for synthesizing artificial networks that are structurally similar to real networks. An important research problem is to identify the generative model that best fits to a target network. In this paper, we investigate this problem and our goal is to select the model that is able to generate graphs similar to a given network instance. By the means of generating synthetic networks with seven outstanding generative models, we have utilized machine learning methods to develop a decision tree for model selection. Our proposed method, which is named “Generative Model Selection for Complex Networks,” outperforms existing methods with respect to accuracy, scalability, and size-independence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlling Heterogeneous Catalysis with Organic Monolayers on Metal Oxides

A key theme of heterogeneous catalysis research is achieving control of the environment surrounding the active site to precisely steer the reactivity toward desired reaction products. One method toward this goal has been the use of organic ligands or self-assembled monolayers (SAMs) on metal nanoparticles. Metal-bound SAMs are typically employed to improve catalyst selectivity but often decrease the reaction rate as a result of site blocking from the ligands. Recently, the use of metal oxide-bound organic modifiers such as organophosphonic acid (PA) SAMs has shown promise as an additional method for tuning reactions on metal oxide surfaces as well as modifying oxide-supported metal catalysts. In this Account, we summarize recent approaches to enhance catalyst performance with oxide-bound monolayers. These approaches include (1) modification of metal oxide catalysts to tune surface reactions, (2) formation of SAMs on the oxide component of supported metal catalysts to modify sites at the metal–support interface, and (3) enhancement of catalyst performance (e.g., stability) through modification of sites remote from the active sites. Further, both the headgroups and organic tail groups of PA SAMs or other ligands can influence reactions on metal oxide surfaces. Binding of the headgroup can selectively poison certain active sites, altering the selectivity in a manner analogous to metal-bound ligands (at the expense of active site quantity). Moreover, tail groups can be functionalized to interact favorably with reactants and intermediates, for instance through dipole–dipole interactions. On supported metal catalysts like Pt/Al 2 O 3 , PA SAMs can selectively form on the oxide support. This selective deposition allows for modification of the metal–support interface with minimal blockage of metal sites. PA headgroups were shown to provide tunable acid sites at the interface, dramatically improving hydrodeoxygenation rates of various alcohols. Additionally, organic tail functionality was used to activate or stabilize specific reactants at the interface, such as with the use of amine-functionalized PAs to stabilize chemisorption of CO 2 during the reverse water gas shift reaction. PAs have also been found to affect the electronic properties of bulk metal sites through long-range electron withdrawal via the oxide, providing an additional avenue to tune catalytic behavior. Finally, organic modifiers were shown to enhance catalytic performance without directly modifying the active site. For instance, in biphasic liquid environments the modification of catalyst particles with hydrophobic or hydrophilic SAMs shifts the selectivity of multipath reactions on the basis of the hydrophobicities of different intermediates and products. As another “long-range” effect, the deposition of ligands on oxide supports improved catalyst stability through both improved resistance to sintering and suppression of active site poisoning. The recent contributions discussed in this Account demonstrate the versatility and significant potential for the approach of modifying catalysts with oxide-bound organic monolayers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Error modeling for surrogates of dynamical systems using machine learning: Machine-learning-based error model for surrogates of dynamical systems

A machine learning–based framework for modeling the error introduced by surrogate models of parameterized dynamical systems is proposed. The framework entails the use of high-dimensional regression techniques (eg, random forests, and LASSO) to map a large set of inexpensively computed “error indicators” (ie, features) produced by the surrogate model at a given time instance to a prediction of the surrogate-model error in a quantity of interest (QoI). This eliminates the need for the user to hand-select a small number of informative features. The methodology requires a training set of parameter instances at which the time-dependent surrogate-model error is computed by simulating both the high-fidelity and surrogate models. Using these training data, the method first determines regression-model locality (via classification or clustering) and subsequently constructs a “local” regression model to predict the time-instantaneous error within each identified region of feature space. We consider 2 uses for the resulting error model: (1) as a correction to the surrogate-model QoI prediction at each time instance and (2) as a way to statistically model arbitrary functions of the time-dependent surrogate-model error (eg, time-integrated errors). We then apply the proposed framework to model errors in reduced-order models of nonlinear oil-water subsurface flow simulations, with time-varying well-control (bottom-hole pressure) parameters. The reduced-order models used in this work entail application of trajectory piecewise linearization in conjunction with proper orthogonal decomposition. Moreover, when the first use of the method is considered, numerical experiments demonstrate consistent improvement in accuracy in the time-instantaneous QoI prediction relative to the original surrogate model, across a large number of test cases. When the second use is considered, results show that the proposed method provides accurate statistical predictions of the time- and well-averaged errors.

97 MATHEMATICS AND COMPUTING↗

Tailoring nanopore formation in atomic layer deposited ultrathin films [Nanopore formation in atomic layer deposited ultrathin films]

Selectivity is a critical attribute of catalysts used in manufacturing of essential and fine chemicals. An excellent way to induce selectivity in catalysts is by using ultrathin films with tailored nanoporosity. For instance, nanopores can be created in atomic layer deposition (ALD) ultrathin over-coatings on supported metal nanoparticles by subjecting the coatings to high temperature annealing. These nanopores expose the active surface of the underlying metal nanoparticles. The dimensions of these nanopores can be tuned to impart shape selectivity: only reactants or products with a specific size or shape can fit inside the pore. In this work, the authors explore the underlying mechanism driving nanopore formation in ALD films. Ultrathin films of ALD TiO 2 (similar to 2.5 nm thick) and ALD Al 2 O 3 (similar to 4.9 nm thick) were deposited on nonporous gamma-Al 2 O 3 nanoparticles. The pore formation and evolution were monitored in situ during thermal annealing using small-angle x-ray scattering (SAXS), and the crystallinity was monitored by in situ x-ray diffraction. A correlation between the nanopore formation and amorphous to crystalline phase transitions in the ALD layers was observed. The authors hypothesize that the pores form through the relaxation of stress induced by densification of the ALD films during the phase transitions. In conclusion, the authors developed a mathematical model to evaluate this hypothesis and found remarkable agreement between the model and the SAXS measurements.

36 MATERIALS SCIENCE↗

Benchmark of numerical modeling approaches on the systematic performance evaluation of wave energy converters

Different numerical modeling methods have been developed and applied to evaluate a variety of performance indicators of wave energy converters (WECs), including the power performance, structural loads, levelized cost of energy, etc. Based on the modeling fidelity, the commonly used numerical modeling approaches can be classified as linear modeling, weakly nonlinear modeling and fully nonlinear modeling approaches. Each method differs in accuracy and computational efficiency, making them suitable for different stages of WEC design. However, the selection of modeling approach could significantly impact evaluation outcomes. For instance, simplified linear models may underestimate structural loads or overestimate energy production in some operational conditions, potentially leading to less cost-effective designs. Given the widespread utilization of these models, it is essential to understand the uncertainties brought by them in performance evaluations. This work is dedicated to benchmarking different linear-potential-flow-based numerical models for evaluating the systematic performance of WECs. Three representative numerical modeling approaches are considered in this work, including linear frequency-domain modeling, statistically linearized spectral-domain modeling and Cummins equation-based nonlinear time-domain modeling. A generic point absorber WEC is considered as the research reference in this work, and different sea sites are taken into account. The numerical models are utilized to predict critical performance indicators, including power performance, the annual energy production, the capacity factor, the levelized cost of energy and the PTO fatigue loads. By comparing the results, this work identifies the uncertainties associated with different modeling approaches in evaluating WEC performance.

Fatigue↗

A Split DNA Scaffold for a Green Fluorescent Silver Cluster

Silver molecules are chromophores with diverse spectra and rich photophysics, and DNA strands act as ligands that develop specific molecular silver species. For instance, C 4 AC 4 T*C 3 GT 4 selectively yields a Ag 10 6+ fluorophore with λ ex /λ em = 490/550 nm. This single-stranded DNA coordinates and protects the cluster, and its integrity was challenged by breaking the phosphodiester backbone at the innocuous T*. The resulting C 4 AC 4 T and C 3 GT 4 fragments also develop the same Ag 10 6+ fluorophore but only when all three components (two fragments + Ag) are present. This C 4 AC 4 T/C 3 GT 4 /Ag 10 6+ complex is favored by higher DNA concentrations and preferentially forms when hybridization forces C 4 AC 4 T and C 3 GT 4 onto a shared DNA duplex. The C 4 AC 4 T/C 3 GT 4 assembly reverses when the cluster photodegrades, which suggests that the cluster is labile. C 4 AC 4 T forms an alternate cluster at low temperatures, but C 3 GT 4 recovers the λ = 490 nm fluorophore at higher temperatures. Thus, the reciprocal interactions between the host DNA strands and the cluster adduct combine to create a highly specific, split-DNA fluorescent Ag cluster capable of sensing target DNA sequences with high specificity and on–off contrast.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quadrupolar magnetic excitations in an isotropic spin-1 antiferromagnet

The microscopic origins of emergent behaviours in condensed matter systems are encoded in their excitations. In ordinary magnetic materials, single spin-flips give rise to collective dipolar magnetic excitations called magnons. Likewise, multiple spin-flips can give rise to multipolar magnetic excitations in magnetic materials with spin S ≥ 1. Unfortunately, since most experimental probes are governed by dipolar selection rules, collective multipolar excitations have generally remained elusive. For instance, only dipolar magnetic excitations have been observed in isotropic S = 1 Haldane spin systems. Here, we unveil a hidden quadrupolar constituent of the spin dynamics in antiferromagnetic S = 1 Haldane chain material Y 2 BaNiO 5 using Ni L 3 -edge resonant inelastic x-ray scattering. Our results demonstrate that pure quadrupolar magnetic excitations can be probed without direct interactions with dipolar excitations or anisotropic perturbations. Originating from on-site double spin-flip processes, the quadrupolar magnetic excitations in Y 2 BaNiO 5 show a remarkable dual nature of collective dispersion. While one component propagates as non-interacting entities, the other behaves as a bound quadrupolar magnetic wave. This result highlights the rich and largely unexplored physics of higher-order magnetic excitations.

36 MATERIALS SCIENCE↗

Harnessing the periplasm of bacterial cells to develop biocatalysts for the biosynthesis of highly pure chemicals

ABSTRACT Although biocatalytic transformation has shown great promise in chemical synthesis, there remain significant challenges in controlling high selectivity without the formation of undesirable by-products. For instance, few attempts to construct biocatalysts for de novo synthesis of pure flavin mononucleotide (FMN) have been successful, due to riboflavin (RF) accumulating in the cytoplasm and being secreted with FMN. To address this problem, we show here a novel biosynthesis strategy, compartmentalizing the final FMN biosynthesis step in the periplasm of an engineered Escherichia coli strain. This construct is able to overproduce FMN with high specificity (92.4% of total excreted flavins). Such a biosynthesis approach allows isolation of the final biosynthesis step from the cytoplasm to eliminate undesirable byproducts, providing a new route to develop biocatalysts for the synthesis of highpurity chemicals. IMPORTANCE The periplasm of Gram-negative bacterial hosts is engineered to compartmentalize the final biosynthesis step from the cytoplasm. This strategy is promising for the overproduction of high-value products with high specificity. We demonstrate the successful implementation of this strategy in microbial production of highly pure FMN.

Yang, Yun↗