Phase-field modeling of interdiffusion between dissimilar Fe-Cr-Ni alloys during non-isothermal hot isostatic pressing
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Isotopic fractionation associated with diffusion in crystals is the most reliable means of understanding the origin of mineral zoning in igneous and metamorphic rocks. We have experimentally determined the relative diffusivities of iron isotopes in olivine as a function of crystallographic orientation, composition, and temperature. For two isotopes i and j of an element, the isotope effect for diffusion is parameterized as D i /D j = (m j /m i ) β , where β is a dimensionless parameter, and D and m stand for diffusivity and mass, respectively. A series of single crystal diffusion couple experiments were conducted at an oxygen fugacity of QFM – 1.5 at temperatures of 1200, 1300, and 1400 °C. Here, for the Fo 83.4 -Fo 88.8 composition pair, β Fe is isotropic and a value of 0.16 ± 0.09 can be used to describe diffusion along all major crystallographic axes in olivine. Based on our experiments and previously reported coupled Mg-Fe isotopic data, we also estimate β Mg = 0.09 ± 0.05 for this range of olivine composition. For the Fo 88.8 -Fo100 composition pair, β Fe becomes anisotropic with β Fe [100] = 0.11 ± 0.03, β Fe [010 ] = 0.14 ± 0.03 (both within error of the value measured for the Fo83.4-Fo88.8 pair), and β Fe [001] = 0.03 ± 0.03. For Fo# between 83.4 and 100, β Fe [100] and β Fe [010] are thus independent of composition. The reason why βFe [001] transitions from ~0.16 to ~0.03 close to the Mg-endmember is unclear. Over the temperature range studied, a dependence of βFe on temperature was not resolved. General analytical expressions are introduced to calculate isotopic fractionation as a function of distance, time, β, and the concentration contrast between the diffusing media for spherical, cylindrical, and planar geometries.
Abstract not provided
Abstract not provided
Explore the source record for details and available documents.
Not Available
Not Available
Diffusion couples between Al-AA6111 and Mg-AZ31 have been used to perform a comprehensive review of the IMC phases that develop in this system, including; their growth kinetics, texture, residual stresses, and mechanical properties. The new observations made have been compared to data in the literature with the aim of providing an in-depth understanding of the detrimental effects of interfacial reaction in aluminum–magnesium dissimilar welding. Three Al–Mg binary IMC phases were identified, γ-Al{sub 12}Mg{sub 17} and β-Al{sub 3}Mg{sub 2}, as well as ε-Al{sub 30}Mg{sub 23}, which has not been previously reported in inter-diffusion studies. The β phase had the highest growth rate and became the dominant constituent of the IMC layer at longer reaction times. The ε-phase only appeared after extended heat treatment, via transformation at the Al{sub 12}Mg{sub 17}/Al{sub 3}Mg{sub 2} interface. Intrinsic diffusion coefficients of Al and Mg, calculated in the Al{sub 3}Mg{sub 2} phase, confirmed that Al is the faster diffusing species (by an order of magnitude) during IMC growth. Indentation techniques showed that all the IMC phases had extremely low toughness (1/2 ). FIB-assisted ring core milling revealed that both the β-Al{sub 3}Mg{sub 2} and γ-Al{sub 12}Mg{sub 17} phases contained large residual stresses. Their in-situ fracture toughness was consequently found to be asymmetric with lower values parallel to the joint interface. Greater tensile residual stress was measured in the β-Al{sub 3}Mg{sub 2} phase, which, combined with a lower toughness and more rapid growth kinetics, explains why it is generally the ‘weak link’ in Al–Mg dissimilar joints.
Power electronics packages typically comprise a dielectric substrate bonded to a metal layer and attached to heat sinks using a low-thermal-conductivity solder. These multiple layers increase the effective thermal resistance of the package and are responsible for package failures under cyclic thermal loads. Bonding the aluminum nitride dielectric layer (AlN) directly to a low coefficient of thermal expansion (CTE) aluminum silicon carbide (AlSiC) cold plate using copper-aluminum (Cu-Al) transient liquid phase (TLP) bonding has been shown to improve the mechanical reliability of the power electronic packages while making the package more compact by bringing the cooling solutions closer to the devices. This study aims to characterize the Cu-Al bonds formed during the TLP bonding of AlSiC with three different power electronics substrates: pure aluminum nitride (AlN), aluminum (DBA), and copper (DBC). The material compositions and microstructures of the bonds were analyzed using scanning electron microscopy (SEM), x-ray spectroscopy (EDS), confocal scanning acoustic microscopy (C-SAM), and x-ray diffraction (XRD). ..alpha..-Al solid compound was identified as the dominant phase in AlN-AlSiC and Al-AlSiC, with a notable presence of SiC particles. In contrast, three intermetallic phases - ..theta..-CuAl2, ..eta..-CuAl, and ..gamma..'- Cu9Al4 - were observed in the Cu-AlSiC bond. A computational solid-state diffusion model was developed to predict the intermetallic compounds (IMCs) formed during Cu-Al TLP bonding in each system, which supported the observation that an initial Cu volume fraction of 20 % in the material layers produced a final bond composition of >95 % Al with minimal IMC growth. However, increased Cu concentrations produced higher concentration gradients, leading to increased growth of IMCs, Kirkendall voids, and interstitial cracks.
Explore the source record for details and available documents.
Free-standing InAs nanowires can be grown on GaAs (111)B substrates by several epitaxial growth techniques. Despite what should be expected from the general accepted Vapor-Liquid-Solid growth model.
Diffusion in thin film layers, especially in metal thin films, is caused reduction of the layers' quality, particularly reduction of the adhesion of layers. We have investigated the influence of deposition temperature on diffusion of atoms in Ag/Ni multilayers. For this purpose, silver and nickel layers were deposited in a vacuum by electron gun method at different temperatures and then Rutherford backscattering (RBS) analysis was used for studying the influence of increasing temperature on diffusion of the layers. Finally, laser damage threshold test was used for adhesion comparison of the layers.
Spark plasma sintering (SPS) is a powder metallurgy technique that employs the use of fast sintering kinetics to produce final consolidated components in a matter of minutes. In order to use blended powders in SPS to obtain fully alloyed parts, diffusion during sintering must be understood. An investigation into the effects of current on the diffusion of copper and nickel was performed using SPS. Bulk specimens were used to generate diffusion couples in SPS in alternating orientations with respect to the direction of the current. Control samples were produced using a horizontal insertion vacuum furnace. Experiments were performed at temperatures between 850°C and 1000°C for 3 h. Concentration profiles were obtained by the use of both energy-dispersive spectroscopy and a Monte Carlo simulated correction curve. Diffusion coefficients and activation energies were calculated for samples produced by SPS and annealing without current. It was shown that, at temperatures near 0.9 T{sub m}, the application of current in SPS inhibits diffusion between copper and nickel due to the re-orientation of electrons caused by the loss of ferromagnetism in nickel. Activation energy for diffusion is, however, decreased due to the temperature gradients arising from the difference in resistivity between the two species.
During the growth of CH{sub 3}NH{sub 3}PbI{sub 3−x}Cl{sub x} (MAPbI{sub 3−x}Cl{sub x}) perovskite films by the two-step inter-diffusion method, the presence of a trace amount of oxygen gas is critical to their physical properties and photovoltaic performance. As the oxygen concentration increases, poor film morphologies and incomplete surface coverage are observed. Moreover, by XRD, Raman scattering, and photoluminescence measurements, we find that MAPbI{sub 3−x}Cl{sub x} grains become more distorted and the electron-hole recombination rate dramatically increases. Higher oxygen concentration triggers a sharp decrease in the current density and the fill factor of corresponding solar cells, which degrades device performance, on average, from 14.3% to 4.4%. This work proves the importance of controlling the oxygen atmosphere in the fabrication of high-performance perovskite solar cells.