Search NASA⌕ Search

SEARCH · Search NASA

Results for “intermediate phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Initial Reactions at the Electrodes of the FFC-Cambridge Process in Molten CaCl{sub 2} to Produce Ti

The CaTiO{sub 3} phase is the intermediate phase at the cathode in the preparation of titanium metal through the direct electrochemical deoxidization of titania in molten CaCl{sub 2}. The formation mechanism of CaTiO{sub 3} in the cathode and the releasing of Cl{sub 2} from the anode were studied during deoxidation of TiO{sub 2} by FFC Cambridge process. Experiments were conducted, where a preformed TiO{sub 2} cylindrical pellet was dipped into molten CaCl{sub 2} at 900 °C under high-purity Ar to evaluate the formation of CaTiO{sub 3} from the hydrolysis of molten CaCl{sub 2}. Partial electrolysis experiments were also used to confirm the formation of CaTiO{sub 3} in molten CaCl{sub 2}, particularly short-time electrolysis (1, 5, 10, 20, and 30 minutes). In addition, Cl{sup −} was observed to discharge at the anode. The results show that the behaviors of both electrodes are closely related to current–time curve. After the turning point on the current–time curve, Cl{sub 2} will no longer be released, maybe no CaTiO{sub 3} will be formed.

36 MATERIALS SCIENCE↗

Investigation of phase evolution of CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) by in situ synchrotron high-temperature powder diffraction

In situ synchrotron X-ray powder diffraction was used to study the high-temperature phase evolution of CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) precursors prepared via solid-state and sol–gel methods. After the precursors are heated to 1225 °C, the CCTO phase is the main phase observed in the calcined powder, with the presence of some minor impurities. Comparing the two precursors, we found that the onset temperature for the CCTO phase formation is 800 °C in the sol–gel precursor, lower than that in the solid-state precursor (875 °C). Intermediate phases were only observed in the sol–gel precursor. Both precursors are able to be calcined to sub-micrometric sized powders. Based on the synchrotron data along with differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA), the phase formation sequence and mechanism during calcination are proposed in this study. -- Graphical abstract: The in situ synchrotron HT-XRD patterns of CCTO sol–gel and solid-state precursor. Highlights: • Phase formation sequence/mechanism in two CCTO precursors has been established. • Formation temperature of CCTO via sol–gel method is lower than solid-state method. • Intermediate phases are only observed in the sol–gel precursor. • Both precursors are able to be calcined into sub-micrometric sized powders.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent experimental explorations of non-classical nucleation

Nucleation, the early stage of crystallization, is a key step in producing functional materials, but nucleation processes have yet to be understood in detail. Recent advanced characterization techniques, especially atomic force microscopy, liquid-cell transmission electron microscopy (TEM) and cryo-TEM, enable scientists to observe previously inaccessible nucleation details at the nanoscale. In this review, we summarize newly suggested non-classical nucleation models with respect to mechanistic understanding from experimental views, which highlight multi-step nucleation mechanisms. Different intermediated phases such as clusters at the pre-nucleation stage, liquid-like precursors, amorphous phases and even oligomers have been revealed, which play vital roles in nucleation and structure control. Moreover, these intermediated phases practically contribute in general to the structural variances of materials for nanoscience and nanotechnology. Overall, these studies ultimately enable us to control nucleation processes for materials synthesis.

Jin, Biao↗

Snapshots of a solid-state transformation: coexistence of three phases trapped in one crystal

Crystal-to-crystal transformations have been crucial in the understanding of solid-state processes, since these may be studied in detail by means of single crystal X-ray diffraction (SCXRD) techniques. The description of the mechanisms and potential intermediates of those processes remains very challenging. In fact, solid-state transient states have rarely been observed, at least to a sufficient level of detail. We have investigated the process of guest extrusion from the non-porous molecular material [Fe(bpp)(H 2 L)](ClO 4 ) 2 ·1.5C 3 H 6 O (bpp = 2,6-bis(pyrazol-3-yl)pyridine; H 2 L = 2,6-bis(5-(2-methoxyphenyl)-pyrazol-3-yl)pyridine; C 3 H 6 O = acetone), which occurs through ordered diffusion of acetone in a crystal-to-crystal manner, leading to dramatic structural changes. The slow kinetics of the transition allows thermal trapping of the system at various intermediate stages. The transiting single crystal can be then examined at these points through synchrotron SCXRD, offering a window upon the mechanism of the transformation at the molecular scale. These experiments have unveiled the development of an ordered intermediate phase, distinct from the initial and the final states, coexisting as the process advances with either of these two phases or, at a certain moment with both of them. The new intermediate phase has been structurally characterized in full detail by SCXRD, providing insights into the mechanism of this diffusion triggered solid-state phenomenon. Lastly, the process has been also followed by calorimetry, optical microscopy, local Raman spectroscopy and powder X-ray diffraction. The discovery and description of an intermediate ordered state in a molecular solid-state transformation is of great interest and will help to understand the mechanistic details and reaction pathways underlying these transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transformation in multiferroic Bi{sub 5}Ti{sub 3}FeO{sub 15} ceramics by temperature-dependent ellipsometric and Raman spectra: An interband electronic transition evidence

Thermal evolution and an intermediate phase between ferroelectric orthorhombic and paraelectric tetragonal phase of multiferroic Bi{sub 5}Ti{sub 3}FeO{sub 15} ceramic have been investigated by temperature-dependent spectroscopic ellipsometry and Raman scattering. Dielectric functions and interband transitions extracted from the standard critical-point model show two dramatic anomalies in the temperature range of 200–873 K. It was found that the anomalous temperature dependence of electronic transition energies and Raman mode frequencies around 800 K can be ascribed to intermediate phase transformation. Moreover, the disappearance of electronic transition around 3 eV at 590 K is associated with the conductive property.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Antisolvent processing of lead halide perovskite thin films studied by in situ X-ray diffraction

Here, whe conversion mechanism from the precursor ink to the perovskite film using antisolvent-induced crystallization has been studied using in situ X-ray diffraction during blade coating and antisolvent deposition. We study various solvent systems forming methylammonium lead iodide perovskite. We find that it is critical to add the antisolvent before the formation of a crystalline intermediate phase. Compared to thermal crystallization, the antisolvent-induced crystallization alters the conversion route. Instead of heterogeneous nucleation and conversion through a crystalline intermediate phase, antisolvent-assisted annealing leads to a rapid direct crystallization, resulting in highly regular smooth films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Topological phase diagram of generalized Su-Schrieffer-Heeger models with interactions

We investigate interacting Su-Schrieffer-Heeger (SSH) chains with two- and three-site unit cells using density matrix renormalization group (DMRG) simulations. By selecting appropriate filling fractions and sweeping across interaction strength 𝐽 𝑧 and dimerization 𝛿, we map out their phase diagrams and identify transition lines via entanglement entropy and magnetization measurements. In the two-site model, we observe the emergence of an interaction-induced antiferromagnetic intermediate phase between the topologically trivial and nontrivial regimes, as well as a critical region at negative 𝐽 𝑧 with suppressed magnetization and finite-size scaling of entanglement entropy. In contrast, the three-site model lacks an intermediate phase and exhibits asymmetric edge localization and antiferromagnetic ordering in both positive and negative 𝐽 𝑧 regimes. We further examine the response of edge states to Ising perturbations. In the two-site model, zero-energy edge modes are topologically protected and remain robust up to a finite interaction strength. However, in the three-site model, where the edge states reside at finite energy, this protection breaks down. Despite this, the edge-localized nature of these states survives in the form of polarized modes whose spatial profiles reflect the noninteracting limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ X-ray diffraction study of the δ to α' isothermal martensitic transformation kinetics in a Pu–Ga alloy

The sequence of phase formation and the isothermal kinetics of the δ to α' phase transformation in a Pu–1.9 at.% Ga alloy are investigated with in situ X-ray diffraction at the Advanced Photon Source. It has been proposed that the formation of a γ' intermediate phase may be responsible for the unusual double-C curve kinetics reported for this isothermal martensitic transformation. While a γ' intermediate phase was not observed at either -120 °C or -155 °C, an unexplained shoulder on the δ (1 1 1) peak was detected at -155 °C. The isothermal kinetics of the δ → α' transformation appear to fit a Johnson–Mehl–Avrami–Kolmogorov equation, but the exponent is not described by existing JMAK theory. The double-C curve kinetics of the δ to α' transformation remain unresolved in plutonium science, and understanding this behavior is key to predicting phase stability in aging Pu–Ga alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Status Update on the NCRP Scientific Committee SC 5-1 Report: Decision Making for Late-Phase Recovery from Nuclear or Radiological Incidents - 13450

In August 2008, the U.S. Department of Homeland Security (DHS) issued its final Protective Action Guide (PAG) for radiological dispersal device (RDD) and improvised nuclear device (IND) incidents. This document specifies protective actions for public health during the early and intermediate phases and cleanup guidance for the late phase of RDD or IND incidents, and it discusses approaches to implementing the necessary actions. However, while the PAG provides specific guidance for the early and intermediate phases, it prescribes no equivalent guidance for the late-phase cleanup actions. Instead, the PAG offers a general description of a complex process using a site-specific optimization approach. This approach does not predetermine cleanup levels but approaches the problem from the factors that would bear on the final agreed-on cleanup levels. Based on this approach, the decision-making process involves multifaceted considerations including public health, the environment, and the economy, as well as socio-political factors. In an effort to fully define the process and approach to be used in optimizing late-phase recovery and site restoration following an RDD or IND incident, DHS has tasked the NCRP with preparing a comprehensive report addressing all aspects of the optimization process. Preparation of the NCRP report is a three-year (2010-2013) project assigned to a scientific committee, the Scientific Committee (SC) 5-1; the report was initially titled, Approach to Optimizing Decision Making for Late- Phase Recovery from Nuclear or Radiological Terrorism Incidents. Members of SC 5-1 represent a broad range of expertise, including homeland security, health physics, risk and decision analysis, economics, environmental remediation and radioactive waste management, and communication. In the wake of the Fukushima nuclear accident of 2011, and guided by a recent process led by the White House through a Principal Level Exercise (PLE), the optimization approach has since been expanded to include off-site contamination from major nuclear power plant accidents as well as other nuclear or radiological incidents. The expanded application under the current guidance has thus led to a broadened scope of the report, which is reflected in its new title, Decision Making for Late-Phase Recovery from Nuclear or Radiological Incidents. The NCRP report, which is due for publication in 2013, will substantiate the current DHS guidance by clarifying and elaborating on the processes required for the development and implementation of procedures for optimizing decision making for late-phase recovery, enabling the establishment of cleanup goals on a site-specific basis. The report will contain a series of topics addressing important issues related to the long-term recovery from nuclear or radiological incidents. Special topics relevant to supporting the optimization of the decision-making process will include cost-benefit analysis, radioactive waste management, risk communication, stakeholder interaction, risk assessment, and decontamination approaches and techniques. The committee also evaluated past nuclear and radiological incidents for their relevance to the report, including the emerging issues associated with the Fukushima nuclear accident. Thus, due to the commonality of the late-phase issues (such as the potential widespread contamination following an event), the majority of the information pertaining to the response in the late-phase decision-making period, including site-specific optimization framework and approach, could be used or adapted for use in case of similar situations that are not due to terrorism, such as those that would be caused by major nuclear facility accidents or radiological incidents. To ensure that the report and the NCRP recommendations are current and relevant to the effective implementation of federal guidance, SC 5-1 has actively coordinated with the agencies of interest and other relevant stakeholders throughout the duration of the project. The resulting report will be an important resource to guide those involved in late-phase recovery efforts following a nuclear or radiological incident. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Fluorination and reduction of CaCrO 3 by topochemical methods

Topochemical reactions between CaCrO 3 and polyvinylidene difluoride yield the new fluorinated phase CaCrO 2.5 F 0.5 , which was characterized by powder synchrotron X-ray diffraction, X-ray photoemission spectroscopy, and magnetic susceptibility measurements. The reaction proceeds via reduced oxide intermediates, CaCrO 2.67 and CaCrO 2.5 , in which CrO 6 octahedral and CrO 4 tetrahedral layers are stacked in a different manner along the c axis of CaCrO 3 . These two intermediate phases can be selectively synthesized by the carbothermal reduction with g-C 3 N 4. Both CaCrO 3 and CaCrO 2.5 F 0.5 adopt the same orthorhombic space group, Pbnm ; however, the fluorinated phase has decreased Cr–O–Cr bond angles as compared to the parent compound in both the ab plane and along the c -direction, which indicates an increased orthorhombic distortion due to the fluorination. Overall, while the oxygen vacancies are ordered in both intermediate phases, CaCrO 2.67 and CaCrO 2.5 , a site preference for fluorine in the oxyfluoride phase cannot be confirmed. CaCrO 3 and CaCrO 2.5 F 0.5 undergo antiferromagnetic phase transitions involving spin canting, where the fluorination causes the transition temperature to increase from 90 K to 110 K, as a result of the competition between the increased octahedral tilting and the enhancement of superexchange interactions involving Cr 3+ ions in the CaCrO 2.5 F 0.5 structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Imitation of spin density wave order in Cu 3 Nb 2 O 8

Spin density waves, based on modulated local moments, are usually associated with metallic materials, but have recently been reported in insulators which display coupled magnetic and structural order parameters. Here, we discuss one such example, the multiferroic Cu 3 Nb 2 O 8 , which is reported to undergo two magnetic phase transitions, first to an unknown antiferromagnetic phase at $T_N$ ≈ 26.5 K , and then to a helicoidal structure coupled to an electric polarization below $T_2$ ≈ 24 K which breaks the crystallographic inversion symmetry. By analogy with other complex oxides, one might naturally expect this intermediate phase to be a spin density wave phase. We apply spherical polarimetry to confirm the low-temperature magnetic structure, yet only observe a single magnetic phase transition to helicoidal order. We argue that the reported unknown phase actually supports an imitation spin density wave which originates from a decoupling of the components of the magnetic order parameter, as allowed by symmetry and driven by thermal fluctuations. This provides a mechanism for the magnetic, but not nuclear, structure to break inversion symmetry thereby creating an intermediate phase in the proximity of $T_N$ which imitates a spin density wave. As the temperature is reduced, this intermediate structure destabilizes the crystal such that a structural chirality is induced, as reflected by the emergence of the electric polarization, and the imitation spin density wave relaxes into a generic helicoid. This scenario in which critical fluctuations allow the magnetic structure to break inversion symmetry while the crystal structure remains centrosymmetric might be relevant to other complex multiferroics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamic imaging of metastable reaction pathways in lithiated cobalt oxide electrodes

Understanding how lithium-ion batteries function down to the atomic level during charge and discharge cycling can provide valuable guidance to optimize structure-property relationships and to design and understand new electrode materials. Lithium insertion and reactions with the electrodes during charge and discharge cycling can occur via metastable structures with complex ordering and related non-equilibrium phenomena. Remarkably, these processes remain still poorly understood despite their significance in the operation of lithium battery systems in critical technologies. In this communication, we present the dynamics of lithium insertion into Co3O4 and the evolution of metastable phases as probed by in-situ transmission electron microscopy, in concert with first principles density functional theory calculations. We show that the initial lithium intercalation reaction occurs with the formation of several metastable and intermediate phases, followed by a sequence of conversion reactions that perturb and expand the cubic-close-packed oxygen array, ultimately generating an end-product of finely dispersed cobalt metal clusters within a Li2O matrix. The calculated non-equilibrium lithiation pathways corroborate with the experimental lithiation voltages, and explain the significant hysteresis that occurs during electrochemical cycling. The data provide new insights into the complexity of solid state lithium electrochemistry in metal oxides that are relevant to advancing lithium battery technology.

conversion reaction electrode↗

In Situ Transmission Electron Microscopy Explores a New Nanoscale Pathway for Direct Gypsum Formation in Aqueous Solution

In the modern construction industry, large gypsum (CaSO 4 ·2H 2 O) boards are manufactured through a two-step procedure, which features the heating of fine gypsum powders to form the intermediate plaster of Paris (bassanite, CaSO 4 ·0.5H 2 O) followed by hydration of the intermediate phase to form the final formed product. Here, we explore a novel pathway toward the fabrication of gypsum microneedles that bypasses formation of the intermediate bassanite phase. Using in situ liquid transmission electron microscopy, the dynamic behavior of fine gypsum powders in a calcium sulfate solution is investigated at the nanoscale and in real time. An oriented-attachment mechanism is found to dominate the direct transformation of gypsum nanoparticles to gypsum microneedles, where no intermediate phases are involved. Our experimental results advance the fundamental understanding of the dynamic interactions between gypsum and water. The proposed nanoscale pathway for gypsum evolution could potentially revolutionize the construction industry rooted in gypsum board manufacturing by promising a time- and energy-efficient mass production procedure. Finally, in addition, this work can inspire research efforts associated with geology, archeology, and biology, where historical significance is frequently deduced from gypsum-related discoveries.

36 MATERIALS SCIENCE↗

Asymmetric Reaction Pathways of Conversion-Type Electrodes for Lithium-Ion Batteries

Metal oxides have been actively explored as promising conversion-type electrode materials for lithium ion batteries due to high deliverable capacity but still notorious for poor cyclability, capacity fading, voltage hysteresis, etc. Yet, the fundamental reason for the undesirable properties of metal oxides behind the repetitive conversion process is still obscure. In this work, we take advantage of synchrotron X-ray techniques as well as transmission electron microscopy to monitor the structural changes during both conversion (lithiation) and reconversion (delithiation) reactions. Difference in diffusion rates of lithium and metal plays a decisive role in determining the reaction pathway. We find lithium accommodation and extraction occur via different reaction routes: lithiation follows a kinetically driven way while delithiation adopts a route close to the thermodynamic ground state path. Thermodynamic structural evolution features the formation of an intermediate phase of Li-Metal (M)-O, suggesting lithium removal accompanies with the Li/M ionic exchange and rearrangement of oxygen framework. The slow diffusion of metal ions and the high kinetic and energy barrier for dissociating the intermediate phase are mainly responsible for uncompleted reconversion reaction, evidenced by remaining Li-M-O phase at the end of charge. Imperfect reconversion reaction eventually limits the utilization of lithium ions over the repeated cycling. Furthermore, this work sheds light on structural changes occurring at metal oxides during both conversion and reconversion processes, which is strongly linked with the performances of conversion-type materials in applications.

25 ENERGY STORAGE↗

Frustrated mixed-spin ladders: Evidence for a bond-order wave phase between rung-singlet and Haldane phases

In frustrated spin ladders, the interplay of frustration and correlations leads to the familiar Haldane (H) and rung-singlet (RS) phases. The nature of the transition between these two phases is still under debate. In this paper we tackle this issue using tools of quantum information theory. We consider frustrated mixed-spin-(1, 1/2) ladders with antiferromagnetic leg, rung and diagonal couplings, and calculate various quantities, such as the entanglement entropy (EE), the Schmidt gap, and the level degeneracy of the entanglement spectrum (ES). We use two numerical techniques, the infinite time-evolving block decimation (iTEBD) and the density matrix renormalization group (DMRG). We demonstrate that there exists an intermediate phase in which the ES levels do not exhibit the characteristic degeneracies of the H and RS phases. To understand the underlying physics in this phase, here we investigate short-range spin correlations along legs, rungs and diagonals and show that in this intermediate phase long-wavelength modulations occur, akin to bond-order waves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Methylammonium Chloride on Wide-Bandgap Halide Perovskites Films for Solar Cells

Wide-bandgap perovskites are of paramount importance as the photoactive layer of the top cell in high-efficiency tandem solar cells. Comparably high Br contents are required to widen the perovskite bandgap. However, the increase in Br content causes heterogeneous halide distribution and photoinstability. Here, in this study, the positive effect of the additive methylammonium chloride (MACl) on the optical and electronic properties of Br-rich perovskite, deposited using N-methyl-2-pyrrolidone (NMP) as co-solvent and the gas quenching method, is investigated. Simultaneous in situ grazing-incidence wide-angle X-ray scattering and photoluminescence spectroscopy are used to track the evolution of the structural and optoelectronic properties of the perovskites with different amounts of Br and MACl during the spin-coating and thermal annealing steps. The formation mechanism is elucidated in the presence of MACl. It is observed that chloride ions inhibit the intermediate phases, favoring the formation of a perovskite phase with higher crystallinity. Nano X-ray fluorescence mapping recognizes Br-richer and poorer nanometric domains, whose average sizes reduce for samples with MACl. In conclusion, it is demonstrated that adding MACl affects the formation of wide-bandgap perovskites via destabilization of the intermediate phases and acts on the homogenization of the halide distribution, leading to improved solar cell performances.

14 SOLAR ENERGY↗

NUMERICALLY PREDICTED INDIRECT SIGNATURES OF TERRESTRIAL PLANET FORMATION

The intermediate phases of planet formation are not directly observable due to lack of emission from planetesimals. Planet formation is, however, a dynamically active process resulting in collisions between the evolving planetesimals and the production of dust. Thus, indirect observation of planet formation may indeed be possible in the near future. In this paper we present synthetic observations based on numerical N-body simulations of the intermediate phase of planet formation including a state-of-the-art collision model, EDACM, which allows multiple collision outcomes, such as accretion, erosion, and bouncing events. We show that the formation of planetary embryos may be indirectly observable by a fully functioning ALMA telescope if the surface area involved in planetesimal evolution is sufficiently large and/or the amount of dust produced in the collisions is sufficiently high in mass.

79 ASTRONOMY AND ASTROPHYSICS↗