Search NASA⌕ Search

SEARCH · Search NASA

Results for “intersection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Qualitative responses of a vortex core to tip blowing and intersecting airfoils

The qualitative responses of a trailing vortex core to change in its convective velocity produced by injection of air into the vortex core and by the flow field of a lifting surface in the path of the core are discussed. Flow pictures of the vortex core and vorticity measurements in the core show that an axial momentum injection of approximately 35% of the total wing drag alters the vortex structure and behavior quite drastically by effectively inducing a more rapid dispersion of the vorticity in the core. The data indicate that the phenomenon is governed by the rate of injection of the momentum rather than the mass flow rate. There also seems to be an optimum rate of injection beyond which increased injection does not bring about equally significant changes in the vortex core. Flow patterns of the region of interaction between the flow field of a lifting surface and the vortex core show two modes of vortex response; (1) the vortex core bends, following the streamline shape until it intercepts the wake of the wing where it is abruptly dispersed, or (2) the vortex core may be sliced into two similar vortices when the vortex hits the leading edge of the wing.

Kantha, H. L.↗
NASA NTRS1972

Earthquake epicenters and fault intersections in central and southern California

The author has identifed the following significant results. ERTS-1 imagery provided evidence for the existence of short transverse fault segments lodged between faults of the San Andreas system in the Coast Ranges, California. They indicate that an early episode of transverse shear has affected the Coast Ranges prior to the establishment of the present San Andreas fault. The fault has been offset by transverse faults of the Transverse Ranges. It appears feasible to identify from ERTS-1 imagery geomorphic criteria of recent fault movements. Plots of historic earthquakes in the Coast Ranges and western Transverse Ranges show clusters in areas where structures are complicated by interaction of tow active fault systems. A fault lineament apparently not previously mapped was identified in the Uinta Mountains, Utah. Part of the lineament show evidence of recent faulting which corresponds to a moderate earthquake cluster.

Abdel-Gawad, M.↗
NASA NTRS1973

Spallation and fracture resulting from reflected and intersecting stress waves.

Discussion of the effects of stress waves produced in solid by explosions or high-velocity impacts. These waves rebound from free surfaces in the form of tensile waves that are capable of causing internal fractures or spallation of the material. The high-speed framing camera is shown to be an important tool for observing the stress waves and fracture in transparent targets, and its photographs provide valuable information on the mechanics of fracture.

Kinslow, R.↗
NASA NTRS1974

Aerodynamic heat transfer to RSI tile surfaces and gap intersections

Review of the results of aerothermal heating tests of a simulated reusable surface insulation (RSI) tile array, performed on the sidewall of a Mach-10 hypersonic tunnel. In particular, the heating characteristics of the tile array, such as they result from heating inside the tile-expansion-space providing gaps between individual tiles, are investigated. The results include the finding that heating on the upstream face of a tile is strongly affected by the interacting longitudinal gap flow.

Dunavant, J. C.↗
NASA NTRS1976

Digital signal processing and control and estimation theory -- Points of tangency, area of intersection, and parallel directions

A number of current research directions in the fields of digital signal processing and modern control and estimation theory were studied. Topics such as stability theory, linear prediction and parameter identification, system analysis and implementation, two-dimensional filtering, decentralized control and estimation, image processing, and nonlinear system theory were examined in order to uncover some of the basic similarities and differences in the goals, techniques, and philosophy of the two disciplines. An extensive bibliography is included.

Willsky, A. S.↗
NASA NTRS1984

An intersection algorithm for moving parts

The problem of deciding whether moving mechanical parts will collide during motion arises frequently in computer-aided design of machinery and in robotics. In machinery design, the problem becomes acute when there are various complex curved mechanical parts that will follow planned trajectories. There is a need to know at an early stage in the design process whether there will be collisions between parts necessitating changes in part shapes, trajectories, or in the overall design. This paper describes a collision detection algorithm that is guaranteed to detect a collision if one will occur, and it also computes the earliest point of contact.

Esterling, D. M.↗
NASA NTRS1987

Kinematics at the intersection of the Garlock and Death Valley fault zones, California: Integration of TM data and field studies. LANDSAT TM investigation proposal TM-019

Processing and interpretation of Thematic Mapper (TM) data, extensive field work, and processing of SPOT data were continued. Results of these analyses led to the testing and rejecting of several of the geologic/tectonic hypotheses concerning the continuation of the Garlock Fault Zone (GFZ). It was determined that the Death Valley Fault Zone (DVFZ) is the major through-going feature, extending at least 60 km SW of the Avawatz Mountains. Two 5 km wide fault zones were identified and characterized in the Soda and Bristol Mountains, forming a continuous zone of NW trending faulting. Geophysical measurements indicate a buried connection between the Avawatz and the Soda Mountains Fault Zone. Future work will involve continued field work and mapping at key locations, further analyses of TM data, and conclusion of the project.

Abrams, Michael↗
NASA NTRS1988

Control of supersonic intersection flowfields through filleting and sweep

The problem of supersonic flow control using fillets and sweep for a wing/body junction has been investigated numerically using a three-dimensional Navier-Stokes code which employs the MacCormack time-split finite-volume technique. An elliptic grid generation technique with direct control over spacing has been incorporated for constructing the grid at a filleted wing/body junction. The computed results for pressure distribution, particle paths, and limiting streamlines on the flat plate and fin surface for a swept fin show a decrease in the peak pressure on the fin leading edge and in the extent of the separated flow region. Moreover, the results for the filleted juncture clearly show that the flow streamline patterns lose much of their vortical character with proper filleting. It is demonstrated that fillets with a radius of 3.5 times the fin leading edge diameter are required to weaken the usual necklace vortex interaction.

Lakshmanan, B.↗
NASA NTRS1989

Experimental and theoretical study of artificial plasma layers produced by two intersecting beams in a chamber

The work done on the Bragg scattering of electromagnetic waves by microwave produced plasma layers is reported. Also summarized is the work accomplished on the propagation of high power microwave pulses in an air breakdown environment. Ongoing work on the theoretical model and numerical results of pulse propagation in air is also presented as are the results of studying the decay of plasma density and temperature.

Kuo, S. P.↗
NASA NTRS1987

Heat transfer in 3D flow regions generated by intersecting surfaces

The objective is to validate code capabilities to model and predict the critical physics associated with heat transfer in highly 3-D flows. Various aspects of this study are presented in viewgraph form and include the following: LeRC 3-D viscous codes; the 3-D compressible flow tunnel; RVC3D laminar horseshoe vortex calculation; the 3-D heat transfer code validation experiment; and measurements in 3-D compressible flow tunnel.

Simoneau, Robert J.↗
NASA NTRS1992

New optimality criteria methods - Forcing uniqueness of the adjoint strains by corner-rounding at constraint intersections

In new, iterative continuum-based optimality criteria (COC) methods, the strain in the adjoint structure becomes non-unique if the number of active local constraints is greater than the number of design variables for an element. This brief note discusses the use of smooth envelope functions (SEFs) in overcoming economically computational problems caused by the above non-uniqueness.

Rozvany, G. I. N.↗
NASA NTRS1993

Study of supersonic intersection flowfield at modified wing-body junctions

The problem of supersonic flow control using fillets and sweep for a wing-body junction has been investigated numerically using a three-dimensional Navier-Stokes code, which employs the MacCormack's time-split finite volume technique. An elliptic grid generation technique with direct control over spacing has been developed for constructing the grid at a filleted wing-body junction. The computed results for pressure distribution, particle paths, and limiting streamlines on the flat plate and fin surface for a swept fin show a decrease in the peak pressure on the fin leading edge and in the extent of the separated flow region. Moreover, the results for filleted juncture clearly show that the flow streamline patterns lose much of their vortical character with proper filleting. It has been demonstrated that fillets with a radius of three-and-one-half times the fin leading-edge diameter are required to weaken the vorticity in the horseshoe vortex by a factor of three for the Mach number and Reynolds number considered in the present study.

Lakshmanan, B.↗