SEARCH · Search NASA

Results for “interval”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Numerical Simulations in Support of a Long-Term Test of Gas Production From Hydrate Accumulations on the Alaska North Slope: Water Production and Associated Design and Management Issues

Here, we investigated numerical simulation strategies for a long-term test of depressurization-induced gas production from the B1 Sand of Unit B at the Hydrate-01 Stratigraphic Test Well. The main objective of this study was to estimate fluid production rates (with emphasis on water production) under a variety of conditions and production scenarios and contribute new insights to the design and management of the field test. In the first part of the study, we investigated the system response to a three-step depressurization process using two limiting sets of flow properties─the expected maximum and minimum intrinsic and effective permeabilities─for the very heterogeneous reservoir. In the second part, we investigated the effect of the production interval length and placement within the formation relative to the boundaries of the hydrate-bearing unit. The best performing well configuration was used in the third part of the study, which used the most representative subsurface flow properties to investigate the effect of the depressurization strategy on the production performance. The best overall performance (largest gas production with modest water production and a strong response at the observation wells) was obtained with a 10 m-long well situated 3 m below the top of the formation and a three-step depressurization scheme at 15-day intervals to a terminal bottomhole pressure of 2.8 MPa. The overall production performance was enhanced by a faster rate of depressurization. Estimated water production rates in all cases were limited and easily manageable. None of the tested well configurations or depressurization strategies significantly reduced water production without also severely reducing gas production. In all the investigated cases, 95% of the long-term fraction of produced water was replenished by inflows from the boundaries and could not be reduced. These substantial water inflows are an unavoidable feature of HU-B and cannot be easily mitigated by a hydraulic control.

02 PETROLEUM↗

DOE OSTI2026

X-ray and γ-ray beam interstellar communication and implications for SETI

The possibility of detecting artificial signals transmitted by alien civilizations via collimated X-ray or gamma-ray beams is investigated. The prospect of using such beams for human communication within the solar system and beyond is also discussed. Detector responses were simulated for input signals and analyzed using relative entropy. For simplicity, all signals were assumed to use on-off keying (OOK) modulation. “Real” signals were generated by taking digital files and sequentially feeding their raw binary data to the detector simulator, the resulting normalized information content of the detector signals was plotted and compared to random noise signals. Since jpeg files contain compressed information, these served as a proxy for artificial alien signals. This showed that there is a clear difference in measured information content between natural and artificial signals, even with relatively poor time resolution in the detector causing the signals to be smeared (dead-time/rise-time intervals many times longer than the duration between signal pulses). It was found that so long as the signal lasts for at least several rise-time/dead-time intervals, the distinction between random and artificial signals is obvious. A space-telescope with high time resolution for searching for such signals is briefly described and its basic requirements are outlined.

43 PARTICLE ACCELERATORS↗

DOE OSTI2025

Alteration history of aluminum-rich rocks at Jezero crater, Mars

Aluminum-rich clay minerals are detected across the ancient surface of Mars and record intervals of intense alteration by liquid water. On Earth, these clay minerals can form from hydrothermal alteration or rainfall-driven chemical weathering over thousands to millions of years, but how they formed on Mars remains a mystery. The Perseverance rover discovered light-toned, cobble-sized, aluminum-rich (30-45 wt% Al 2 O 3 ) “float” rocks (rock fragments), with some exhibiting spectral signatures of kaolinite, an aluminum-rich clay mineral. These rocks now enable an investigation into the ancient kaolinite-bearing terrains of Mars. To interpret their formation, we use data from the SuperCam and Mastcam-Z instruments onboard the rover to compare the chemistry and reflectance spectra of the float rocks with deeply weathered paleosols and hydrothermal kaolin deposits from Earth’s geological record. Aluminum and titanium enrichments coupled with depletion of iron and magnesium are unlike hydrothermal deposits and instead comparable to bleached horizons of paleosols that formed under high rainfall during past greenhouse climates on Earth. These rocks therefore likely represent some of the wettest intervals of Mars’ history.

58 GEOSCIENCES↗

DOE OSTI2025

Detection of Isotopes in Urban Source Search Low-Count Gamma Spectra Using Hopfield Neural Networks

Source search campaigns involve measurements of background gamma-ray spectra with a mobile detector-spectrometer traveling along arbitrarily chosen trajectories over a wide screening area. Radiation counts are typically measured with a tellurium-doped sodium iodide [NaI(Tl)] scintillator detector-spectrometer in short acquisition intervals, usually 1 s. The objective is to detect orphan isotopes with half-lives shorter than those of the isotopes in the natural background. In principle, radioisotopes can be identified by their unique gamma emission spectrum. However, detecting orphan isotopes in search data is challenging because low counts measured in short acquisition intervals result in incomplete spectral lines. In this study, we investigate the performance of a Hopfield neural network (HNN) that implements an auto-associative memory for the detection of isotopes of interest in an urban search campaign. The HNN is trained on one example of gamma spectra with well-resolved spectral lines of each isotope of interest. During testing, the auto-associative memory implementation of the HNN processes low-count gamma spectra with partially complete isotopic lines by matching incoming measurements to the closest one of its memory-stored patterns. The testing database consisted of almost 10 000 1-s gamma spectra, including measurements of orphan isotopes 137 Cs, 241 Am, and 131 I, obtained during two urban search surveys with a NaI(Tl) detector. The performance of the HNN detection algorithm was evaluated using precision, recall, and F1 scores, and benchmarked with a multiple linear regression (MLR) identification algorithm. In conclusion, the test results demonstrate that HNN outperforms MLR in the detection of all the isotopes of interest.

Auto associative memory↗

DOE OSTI2026

Reviving sub-keV warm dark matter: a UVLF-based analysis

Thermal warm dark matter (WDM) particles with m WDM ≤ 1 keV are ruled out at more than 4σ by multiple observational probes, owing to the strong suppression of small-scale structure induced by early-time free-streaming. Recently, it was highlighted that a small admixture of ∼ 1% (f CDM ∼ 0.01) cold dark matter (CDM) endowed with a blue-tilted isocurvature spectrum could offset the WDM-induced suppression and relax the WDM mass bound by a factor of 𝒪(10). If viable, this “warm + cold-isocurvature” scenario would allow sub-keV WDM particles to constitute nearly the full dark matter abundance while potentially alleviating some small-scale tensions. In this work, we test this mechanism by constraining the WDM mass mWDM while marginalizing over CDM isocurvature parameters. We combine ultraviolet luminosity function measurements from the Hubble Space Telescope and James Webb Space Telescope over redshift 4 ≤ z ≤ 11 with CMB, BAO, and SNe data. For a pure WDM model, our joint analysis yields a lower bound m WDM > 1.8 keV (95% credible intervals). When CDM isocurvature is introduced at f CDM = 0.01, the limit relaxes to m WDM > 0.27 keV (95% credible intervals), reflecting a shallow degeneracy in which blue-tilted isocurvature fluctuations partially compensate for WDM suppression. These results provide new constraints on thermal WDM in the presence of CDM isocurvature fluctuations and quantify the extent to which such fluctuations can mask the small-scale signatures of light relics.

cosmological parameters from CMBR↗

DOE OSTI2025

Thermal stress in degraded forests in the Brazilian Amazon Arc of Deforestation

Understanding thermal stress in tropical forests has taken on new urgency in light of accelerating climate change and expansion of deforestation and forest degradation. Degraded tropical forests in particular may be approaching critical temperature thresholds even more rapidly than intact forests, with implications for tree survival and ecosystem recovery. We investigate thermal stress in degraded tropical forests within the Brazilian Amazon Arc of Deforestation. Using land surface temperature data from the ECOsystem Spaceborne Thermal Radiometer Experiment on the international Space Station (ECOSTRESS), we compared canopy temperatures of intact, selectively logged, and burned forests in Feliz Natal, Mato Grosso, Brazil. Upper canopy temperatures in previously burned forests were 4.1% higher (mean = 36.5 °C) and 50.9% more variable compared to intact and logged forests, which showed remarkably similar temperature distributions (means of 34.9 °C and 35.1 °C, respectively). Modeled leaf temperature distributions based on canopy temperature measurements from one of the warmest days in a 2 year dry season record indicated that 87% of leaves in the warmest burned forest patches exceeded the temperature threshold where respiration surpasses photosynthesis, compared to approximately 72%–74% in intact and logged forests, respectively, in the same time period. After controlling for environmental factors, burned forests were predicted to be 2.6 °C warmer on average [1.39 °C–3.96 °C, 95% credible interval] than intact forests across a 5–40 m canopy height range. Burned forests showed modest thermal recovery over time, with temperatures decreasing by approximately 1.2 °C over a 30 year recovery period. In contrast, logged forests showed minimal thermal differences from intact forests (−0.353 on average, [−1.125–0.274, 95% credible interval]) and negligible change (0.15 °C) over the same timeframe. While the absolute probabilities of exceeding damaging thermal thresholds remain low across all forest types under current climate conditions, the probability of leaves exceeding temperatures that cause permanent leaf damage was ten times higher in burned forests, with implications for the future of burned forest regeneration in water-limited regions of the Amazon basin. In particular, the combination of higher mean temperatures, greater temperature variability, and more frequent exposure to damaging thermal thresholds implies that burned tropical forests will experience substantially higher mortality rates and slower biomass recovery compared to intact and selectively logged forests, especially in water-limited regions where trees cannot rely on evaporative cooling to moderate canopy temperatures.

Brazilian Amazon Arc of Deforestation↗

DOE OSTI2026

Conformalized-KANs: Uncertainty Quantification with Coverage Guarantees for Kolmogorov-Arnold Networks (KANs) in Scientific Machine Learning

This paper explores uncertainty quantification (UQ) methods in the context of Kolmogorov–Arnold Networks (KANs). We apply an ensemble approach to KANs to obtain a heuristic measure of UQ, enhancing interpretability and robustness in modeling complex functions. Building on this, we introduce Conformalized-KANs, which integrate conformal prediction, a distribution-free UQ technique, with KAN ensembles to generate calibrated prediction intervals with guaranteed coverage.} Extensive numerical experiments are conducted to evaluate the effectiveness of these methods, focusing particularly on the robustness and accuracy of the prediction intervals under various hyperparameter settings. We show that the conformal KAN predictions can be applied to recent extensions of KANs, including Finite Basis KANs (FBKANs) and multifideilty KANs (MFKANs). The results demonstrate the potential of our approaches to significantly improve the reliability and applicability of KANs in scientific machine learning.

• Artificial intelligence (AI) / machine learning ↗

DOE OSTI2024

Nuclear suppression of coherent J / ψ photoproduction in heavy-ion ultraperipheral collisions and leading twist nuclear shadowing

We determine the nuclear suppression factor S Pb ( x ) , where x = M J / ψ 2 / W γ p 2 with M J / ψ the J / ψ mass and W γ p the photon-nucleon energy, for the cross section of coherent J / ψ photoproduction in heavy-ion ultraperipheral collisions at the Large Hadron Collider and Relativistic Heavy Ion Collider by performing the χ 2 fit to all available data on the cross section d σ A A → J / ψ A A / d y as a function of the J / ψ rapidity y and the photoproduction cross section σ γ A → J / ψ A ( W γ p ) as a function of W γ p . We find that while the d σ A A → J / ψ A A / d y data alone constrain S Pb ( x ) for x ≥ 10 − 3 , the combined d σ A A → J / ψ A A / d y and σ γ A → J / ψ A ( W γ p ) data allow us to determine S Pb ( x ) in the wide interval 10 − 5 < x < 0.05 . In particular, the data favor S Pb ( x ) , which decreases with a decrease of x in the 10 − 4 < x < 0.01 interval and can be both decreasing or constant for x < 10 − 4 . Identifying S Pb ( x ) with the ratio of the gluon distributions in Pb and the proton R g ( x , Q 0 2 ) = g A ( x , Q 0 2 ) / [ A g p ( x , Q 0 2 ) ] , we demonstrate that the leading twist approximation for nuclear shadowing provides a good description of all the data on d σ A A → J / ψ A A / d y and σ γ A → J / ψ A ( W γ p ) as well as on the experimental values for S Pb ( x ) derived from σ γ A → J / ψ A ( W γ p ) . We also show that modern nuclear parton distributions reasonably reproduce S Pb ( x ) as well. Published by the American Physical Society 2024

Guzey, V. (ORCID:0000000223938507)↗

DOE OSTI2025

Particle production as a function of charged-particle flattenicity in 𝑝⁢𝑝 collisions at $\sqrt{s}$ = 13 TeV

This paper reports the first measurement of the transverse momentum (𝑝 T ) spectra of primary charged pions, kaons, (anti)protons, and unidentified particles as a function of the charged-particle flattenicity in pp collisions at $\sqrt{s}$ =13 TeV. Flattenicity is a novel event shape observable that is measured in the pseudorapidity intervals covered by the V0 detector, 2.8 < 𝜂 < 5.1 and −3.7 < 𝜂 < −1.7. According to QCD-inspired phenomenological models, it shows sensitivity to multiparton interactions and is less affected by biases toward larger 𝑝 T due to local multiplicity fluctuations in the V0 acceptance than multiplicity. The analysis is performed in minimum-bias (MB) as well as in high-multiplicity events up to 𝑝 T = 20 GeV/⁢𝑐. The event selection requires at least one charged particle produced in the pseudorapidity interval |𝜂| < 1. The measured 𝑝 T distributions, average 𝑝 T , kaon-to-pion and proton-to-pion particle ratios, presented in this paper, are compared to model calculations using pythia 8 based on color strings and EPOS LHC. The modification of the 𝑝 T -spectral shapes in low-flattenicity events that have large event activity with respect to those measured in MB events develops a pronounced peak at intermediate 𝑝 T (2 < 𝑝 T < 8 GeV/𝑐), and approaches the vicinity of unity at higher 𝑝 T . The results are qualitatively described by pythia, and they show different behavior than those measured as a function of charged-particle multiplicity based on the V0M estimator.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Combination of Searches for Higgs Boson Pair Production in pp Collisions at $\sqrt{s}$ = 13 TeV with the ATLAS Detector

This Letter presents results from a combination of searches for Higgs boson pair production using 126–140 fb−1 of proton-proton collision data at √𝑠 =13 TeV recorded with the ATLAS detector. At 95% confidence level (CL), the upper limit on the production rate is 2.9 times the standard model (SM) prediction, with an expected limit of 2.4 assuming no Higgs boson pair production. Constraints on the Higgs boson self-coupling modifier 𝜅 𝜆 = 𝜆 𝐻⁡𝐻⁡𝐻 /𝜆$^{SM}_{𝐻⁡𝐻⁡𝐻}$, and the quartic 𝐻⁡𝐻⁡𝑉⁢𝑉 coupling modifier 𝜅 2⁢𝑉 = 𝑔 𝐻⁡𝐻⁡𝑉⁢𝑉⁡ /𝑔$^{SM}_{𝐻⁡𝐻⁡𝑉⁢𝑉}$, are derived individually, fixing the other parameter to its SM value. The observed 95% CL intervals are −1.2<𝜅 𝜆 < 7.2 and 0.6<𝜅 2⁢𝑉 < 1.5, respectively, while the expected intervals are −1.6<𝜅 𝜆 < 7.2 and 0.4<𝜅 2⁢𝑉 < 1.6 in the SM case. Constraints obtained for several interaction parameters within Higgs effective field theory are the strongest to date, offering insights into potential deviations from SM predictions.

Hadron colliders↗

DOE OSTI2025

Model-agnostic likelihood for the reinterpretation of the 𝐵 + → 𝐾 + ⁢$𝑣\bar{𝑣}$ measurement at Belle II

We recently measured the branching fraction of the 𝐵 + → 𝐾 + ⁢$𝑣\bar{𝑣}$ decay using 362 fb −1 of on-resonance 𝑒 + ⁢𝑒 − collision data under the assumption of Standard Model kinematics, providing the first evidence for this decay. To facilitate future reinterpretations and maximize the scientific impact of this measurement, we publicly release the full analysis likelihood along with all necessary material required for reinterpretation under arbitrary theoretical models sensitive to this measurement. In this work, we demonstrate how the measurement can be reinterpreted within the framework of the weak effective theory. Using a kinematic reweighting technique in combination with the published likelihood, we derive marginal posterior distributions for the Wilson coefficients, construct credible intervals, and assess the goodness of fit to the Belle II data. For the weak effective theory Wilson coefficients, the posterior mode of the magnitudes |𝐶 VL +𝐶 VR |, |𝐶 SL +𝐶 SR |, and |𝐶 TL | corresponds to the point (11.3, 0.0, 8.2). The respective 95% credible intervals are [1.9, 16.2], [0.0, 15.4], and [0.0, 11.2].

bottom quark↗

DOE OSTI2026

Uncovering hidden bias in neutron diffraction residual strain measurements

When calculating residual strain via neutron or X-ray diffraction, uncertainties propagated from the peak fit are often inadequate to describe the true scatter of measurements about a singular strain state, such as one that should describe a macroscopic continuum. Because diffraction is inherently a selective process, orientation-dependent scatter arises from the sub-sampling of strong microstructure and strain gradients. This paper investigates the appropriateness of propagated uncertainties with reference to their original intention, i.e. noise about a mean value. Thirty-six unique orientations of strain measurements are taken at multiple locations within an additive friction-stir deposition component with fine-scale gradients (∼200 µm) of plastic strain, texture and residual elastic strain. Multiple strain and stress calculation pathways are compared: direct substitution of three measurements into Hooke's law, direct inversion of any six unique orientations into the strain state tensor and thirty-six measurement least-squares estimation. For the last two cases, the appropriateness of the uncertainty interval is statistically evaluated on the basis of a physical constraint: common agreement under the strain transformation law. For this sample, the direct inversion of six measurements retains a conservative estimate of the uncertainty. However, propagated uncertainties in the least-squares solution greatly underestimate the true experimental scatter. A simple pathway to estimate appropriate uncertainty intervals is suggested. These results demonstrate that the interpretation of uncertainty in residual strain is strongly dependent on intrinsic sample-dependent effects, and that oversampling orientations and statistical analysis can give more accurate results with realistic uncertainties.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Descriptor: High Temporal Resolution Meteorological Data at Oak Ridge Reservation (ORR-HiResMet)

Access to continuous, quality assessed meteorological data is critical for understanding the climatology and atmospheric dynamics of a region. Research facilities like Oak Ridge National Laboratory (ORNL) rely on such data to assess site-specific climatology, model potential emissions, establish safety baselines, and prepare for emergency scenarios. To meet these needs, on-site towers at ORNL collect meteorological data at 15-minute and hourly intervals. However, data measurements from meteorological towers are affected by sensor sensitivity, degradation, lightning strikes, power fluctuations, glitching, and sensor failures, all of which can affect data quality. To address these challenges, we conducted a comprehensive quality assessment and processing of five years of meteorological data collected from ORNL at 15-minute intervals, including measurements of temperature, pressure, humidity, wind, and solar radiation. The time series of each variable was pre-processed and gap-filled using established meteorological data collection and cleaning techniques, i.e., the time series were subjected to structural standardization, data integrity testing, automated and manual outlier detection, and gap-filling. The data product and highly generalizable processing workflow developed in Python Jupyter notebooks are publicly accessible online. As a key contribution of this study, the evaluated 5-year data will be used to train atmospheric dispersion models that simulate dispersion dynamics across the complex ridge-and-valley topography of the Oak Ridge Reservation in East Tennessee.

Steckler, Morgan R. [Oak Ridge National Laboratory↗

DOE OSTI2025

Strategies for the in-orbit gain tracking using the modulated X-ray sources for the Resolve microcalorimeter spectrometer on the X-ray Imaging and Spectroscopy Mission

Accurate and precise correction of the gain drift is the key to achieve the required energy resolution of the Resolve microcalorimeter spectrometer on the X-ray Imaging and Spectroscopy Mission (XRISM). Therefore, Resolve is equipped with highly configurable X-ray sources called the modulated X-ray source (MXS). The pulsed nature allows us to separate calibration and astrophysical X-rays by time interval selections. However, undesirable characteristics of the MXS, such as the afterglow X-rays, restrict the allowed configuration range. Moreover, the nonlinear and discontinuous behaviors of the calibration line count rate make the determination of the optimal setting highly complex. The MXS count rate model has been established using measurements in the spacecraft thermal vacuum test with the flight detector and MXS. A trade-off study using the model enables us to choose a few settings for the continuous use of the MXS optimized for different ranges of target gain tracking intervals. An alternative approach, where the MXS is used only intermittently, has also been developed and implemented. This new mode enables us to reconstruct the drift without having most of the undesirable effects in science data. This also forms the basis of the gain tracking under the current Resolve configuration with the closed gate valve.

Astronomy and AstroPhysics↗

DOE OSTI2024

Day-to-day reliability of basal heart rate and short-term and ultra short-term heart rate variability assessment by the Equivital eq02+ LifeMonitor in US Army soldiers

Introduction The present study determined the (1) day-to-day reliability of basal heart rate (HR) and HR variability (HRV) measured by the Equivital eq02+ LifeMonitor and (2) agreement of ultra short-term HRV compared with short-term HRV. Methods Twenty-three active-duty US Army Soldiers (5 females, 18 males) completed two experimental visits separated by >48 hours with restrictions consistent with basal monitoring (eg, exercise, dietary), with measurements after supine rest at minutes 20–21 (ultra short-term) and minutes 20–25 (short-term). HRV was assessed as the SD of R–R intervals (SDNN) and the square root of the mean squared differences between consecutive R–R intervals (RMSSD). Results The day-to-day reliability (intraclass correlation coefficient (ICC)) using linear-mixed model approach was good for HR (0.849, 95% CI: 0.689 to 0.933) and RMSSD (ICC: 0.823, 95% CI: 0.623 to 0.920). SDNN had moderate day-to-day reliability with greater variation (ICC: 0.689, 95% CI: 0.428 to 0.858). The reliability of RMSSD was slightly improved when considering the effect of respiration (ICC: 0.821, 95% CI: 0.672 to 0.944). There was no bias for HR measured for 1 min versus 5 min (p=0.511). For 1 min measurements versus 5 min, there was a very modest mean bias of −4 ms for SDNN and −1 ms for RMSSD (p≤0.023). Conclusion When preceded by a 20 min stabilisation period using restrictions consistent with basal monitoring and measuring respiration, military personnel can rely on the eq02+ for basal HR and RMSSD monitoring but should be more cautious using SDNN. These data also support using ultra short-term measurements when following these procedures.

General & Internal Medicine↗

DOE OSTI2024

Can the angular scale of cosmic homogeneity be used as a cosmological test?

Abstract In standard cosmology, the cosmic homogeneity scale is the transition scale above which the patterns arising from non-uniformities – such as groups and clusters of galaxies, voids, and filaments – become indistinguishable from a random distribution of sources. Recently, different groups have investigated the feasibility of using such a scale as a cosmological test and arrived at different conclusions. In this paper, we complement and extend these studies by exploring the evolution of the spatial ( $$R_{\textrm{H}}$$ R H ) and angular ( $$\theta _{\textrm{H}}$$ θ H ) homogeneity scales with redshift, assuming a spatially flat, $$\varLambda $$ Λ -Cold Dark Matter universe and linear cosmological perturbation theory. We confirm previous results concerning the non-monotonicity of $$R_{\textrm{H}}$$ R H with the matter density parameter $$\varOmega _{\textrm{m0}}$$ Ω m0 but also show that it exhibits a monotonical behavior with the Hubble constant $$H_{0}$$ H 0 within a large redshift interval. More importantly, we find that, for $$z \gtrsim 0.6$$ z ≳ 0.6 , $$\theta _{\textrm{H}}$$ θ H presents a monotonical behavior with $$\varOmega _{\textrm{m0}}$$ Ω m0 , as well as for $$H_0$$ H 0 the entire redshift interval analyzed. We find also that the angular homogeneity scale is sensitive to $$H_{0}$$ H 0 , especially at higher redshifts. Using the currently available $$\theta _{\textrm{H}}$$ θ H measurements, we illustrate the constraints on the $$\varOmega _{\textrm{m0}}$$ Ω m0 – $$H_{0}$$ H 0 plane through a MCMC analysis and show the feasibility of using the angular homogeneity scale as a new, model-independent way to constrain cosmological parameters.

Physics↗

DOE OSTI2024

Multiplicity dependence of charged-particle intra-jet properties in pp collisions at $\sqrt{s}$ = 13 TeV

The first measurement of the multiplicity dependence of intra-jet properties of leading charged-particle jets in proton–proton (pp) collisions is reported. The mean charged particle multiplicity and jet fragmentation distributions are measured in minimum-bias and high-multiplicity pp collisions at center-of-mass energy $\sqrt{s}$ = 13 TeV using the ALICE detector. Jets are reconstructed from charged particles produced in the midrapidity region (|η| < 0.9) using the sequential recombination anti-k T algorithm with jet resolution parameters R = 0.2, 0.3, and 0.4 for the trans verse momentum (p T ) interval 5–110 GeV/c. The high multiplicity events are selected by the forward V0 scintilla tor detectors. The mean charged-particle multiplicity inside the leading jet cone rises monotonically with increasing jet p T in qualitative agreement with previous measurements at lower energies. The distributions of jet fragmentation function variables z ch and ξ ch are measured for different jet-p T intervals. Jet-p T independent fragmentation of leading jets is observed for wider jets except at high- and low-z ch values. The observed “hump-backed plateau” structure in the ξ ch distribution indicates suppression of low-p T particles. In high-multiplicity events, an enhancement of the fragmen tation probability of low-z ch particles accompanied by a suppression of high-zch particles is observed compared to minimum-bias events. This behavior becomes more promi nent for low-p T jets with larger jet radius. The results are compared with predictions of QCD-inspired event generators, PYTHIA 8 with Monash 2013 tune and EPOS LHC. It is found that PYTHIA 8 qualitatively reproduces the jet modification in high-multiplicity events except at high jet p T . These measurements provide important constraints to models of jet fragmentation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2026

Data for Promoter Deletion in the Soybean Compact Mutant Leads to Overexpression of a Gene with Homology to the C20-Gibberellin 2-Oxidase Family

Height is a critical component of plant architecture, significantly affecting crop yield. The genetic basis of this trait in soybean remains unclear. In this study, we report the characterization of the Compact mutant of soybean, which has short internodes. The candidate gene was mapped to chromosome 17, and the interval containing the causative mutation was further delineated using biparental mapping. Whole-genome sequencing of the mutant revealed an 8.7 kb deletion in the promoter of the Glyma.17g145200 gene, which encodes a member of the class III gibberellin (GA) 2-oxidases. The mutation has a dominant effect, likely via increased expression of the GA 2-oxidase transcript observed in green tissue, as a result of the deletion in the promoter of Glyma.17g145200. We further demonstrate that levels of GA precursors are altered in the Compact mutant, supporting a role in GA metabolism, and that the mutant phenotype can be rescued with exogenous GA3. We also determined that overexpression of Glyma.17g145200 in Arabidopsis results in dwarfed plants. Thus, gain of promoter activity in the Compact mutant leads to a short internode phenotype in soybean through altered metabolism of gibberellin precursors. These results provide an example of how structural variation can control an important crop trait and a role for Glyma.17g145200 in soybean architecture, with potential implications for increasing crop yield.

Biomass Analytics↗