Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Challenges of Investigating Redox Reactions in Room Temperature Ionic Liquids [Slides]

The goal of this project is to understand the effects of the morphology and chemical properties of ionic liquids (IL) on the heterogeneous electron transfer processes of simple inorganic ions. This project will seek to understand the fundamental chemical and physical phenomena in ionic liquids through electrochemical, and material characterization techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionene polymers. III

Dicationic crosslinking agents isolation and characterization and formation of polymers with ionic crosslinks

Keyzer, H.↗

Experimental observation of electrochemical rate limitations affecting sodium ion-electron recombination at electrodes of the alkali metal thermoelectric converter at T about 1200 K

This paper considers a model of the internal impedances of thin porous Mo and W alkali metal thermoelectric converter (AMTEC), in which the kinetic parameters associated with the reaction of the beta-double-prime alumina solid electrolite (BASE)/porous metal/gas three-phase boundary can be evaluated. Impedance data in the frequency range 0.01-100,000 Hz were collected over a range of AMTEC cell operating voltages for small-area thin porous Mo and W electrodes, yielding apparent charge transfer resistances at a series of cell potentials/currents. The ohmic resistance in the AMTEC cell could be broken down and characterized with three parameters: the BASE ionic resistance, the electrode film sheet resistance, and the contact/lead resistance, all of which could be calculated or measured independently and used to calculate power curves in good agreement with observed power curves. It is shown that these calculations can be used to predict the properties of electrodes with optimized parameters or to detect enhanced transport modes.

Williams, R. M.↗

Advances in Molten Oxide Electrolysis for the Production of Oxygen and Metals from Lunar Regolith

As part of an In-Situ Resource Utilization infrastructure to sustain long term-human presence on the lunar surface, the production of oxygen and metals by electrolysis of lunar regolith has been the subject of major scrutiny. There is a reasonably large body of literature characterizing the candidate solvent electrolytes, including ionic liquids, molten salts, fluxed oxides, and pure molten regolith itself. In the light of this information and in consideration of available electrolytic technologies, the authors have determined that direct molten oxide electrolysis at temperatures of approx 1600 C is the most promising avenue for further development. Results from ongoing studies as well as those of previous workers will be presented. Topics include materials selection and testing, electrode stability, gas capture and analysis, and cell operation during feeding and tapping.

Sadoway, Donald R.↗

Local Multimodal Electro-Chemical-Structural Characterization of Solid-Electrolyte Grain Boundaries

Typical models of polycrystalline ionic materials treat the grain boundary properties as single valued, without consideration of the full range of values that define the macroscopically measured average. Here a unique experimental platform suitable for local multimodal characterization of individual grain boundaries in bicrystal fibers is reported. A variation of three orders of magnitude in the grain boundary conductivity of ceria is observed, as measured across six individual bicrystals by both alternating current impedance spectroscopy and direct current (D.C.) linear sweep voltammetry. Nonlinear behavior of the D.C. measurements is consistent with resistance due to a space charge effect. Time-of-flight secondary ion beam spectroscopy reveals a correlation between grain boundary resistance and the concentration of impurities Si, Al, and Ca segregated at the grain boundaries, although the bulk concentrations of these impurities are negligible. Electron backscatter diffraction analysis of the crystal orientations suggests a correlation between the misorientation across the grain boundaries and grain boundary resistance. These correlations point towards a grain boundary resistance that arises from impurity-generated space charge effects and variations in impurity concentration and hence resistivity driven by the energetics of impurity segregation to grain boundaries of differing surface energies.

36 MATERIALS SCIENCE↗

Chemical and Electrochemical Characterization of Hot–Pressed Li 6 PS 5 Cl Solid State Electrolyte: Operating Pressure–Invariant High Ionic Conductivity

Sulfide solid state electrolytes (SSE) are among the most promising materials in the effort to replace liquid electrolytes, largely due to their comparable ionic conductivities. Among the sulfide SSEs, Argyrodites (Li 6 PS 5 X, X=Cl, Br, I) further stand out due to their high theoretical ionic conductivity (~1×10 –2 S cm –1 ) and interfacial stability against reactive metal anodes such as lithium. Generally, solid state electrolyte pellets are pressed from powder feedstock at room temperature, however, pellets fabricated by cold pressing consistently result in low bulk density and high porosity, facilitating interfacial degradation reactions and allowing dendrites to propagate through the pores and grain boundaries. Here, we demonstrate the mechanical and electrochemical implications of hot-pressing standalone LPSCl SSE pellets with near-theoretical ionic conductivity, superior cycling performance, and enhanced mechanical stability. X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and x-ray diffraction spectroscopy (XRD) analysis reveal no chemical changes to the Argyrodite surface after hot pressing up to 250°C. Furthermore, we use electrochemical impedance spectroscopy (EIS) to understand mechanical stability of Argyrodite SSE pellets as a function of externally applied pressure, demonstrating for the first time pressed standalone Argyrodite pellets with near-theoretical conductivities at external pressures below 14 MPa.

25 ENERGY STORAGE↗

Anion exchange membranes based on (3-acrylamidopropyl) trimethylammonium chloride (APTA) and phenyl Acrylate: Impact of crosslinker and crosslinker content on physiochemical properties and transport behavior of acetate and formate

CO 2 reduction cells are innovative devices that convert CO 2 into valuable chemicals, such as formate (OFm - ) and acetate (OAc - ), at the cathode. One of the key challenges in these devices is the development of ion exchange membranes that enable the transport of charge carriers between electrodes while minimizing the transfer of CO 2 reduction products. This study focuses on the preparation and characterization of crosslinked anion exchange membranes (AEMs) made of phenyl acrylate (PA) and (3-acrylamidopropyl) trimethylammonium chloride (APTA), crosslinked with either poly(ethylene glycol) diacrylate (PEGDA) or N,N’-methylenebisacrylamide (MBAA). Here, the membranes are characterized to understand their physiochemical properties and corresponding transport behavior through characterization of water volume fraction, mechanical properties, ionic conductivity, ion exchange capacity, water contact angle, glass transition temperature as well as their permeability and solubility to formate and acetate. MBAA crosslinked membranes exhibit higher Young’s modulus and lower strain at break compared to PEGDA-crosslinked membranes, which is attributed to their shorter chain length. Within a series of membranes of varied comonomer content, for either PEGDA or MBAA as crosslinker, permeabilities generally follow free volume theory (increasing permeability with increasing water content where water content increases with decreasing crosslinker content). Interestingly, for membranes with different crosslinkers but analogous water volume fraction significant differences (∼2 orders of magnitude) in permeability are observed which we attribute to differences in chain mobility as characterized through the glass transition temperature.

25 ENERGY STORAGE↗

Absence of moment fragmentation in the mixed B -site pyrochlore Nd 2 GaSbO 7

Nd-based pyrochlore oxides of the form Nd 2 GaSbO 7 have garnered a significant amount of interest owing to the moment fragmentation physics observed in Nd 2 GaSbO 7 and speculated in Nd 2 GaSbO 7 . Notably this phenomenon is not ubiquitous in this family, as it is absent in Nd 2 GaSbO 7 , which features a smaller ionic radius on the B site. Here, we explore the necessary conditions for moment fragmentation in the Nd pyrochlore family through a detailed study of the mixed B-site pyrochlore Nd 2 GaSbO 7 . Furthermore, the B site of this system is characterized by significant disorder and an extremely small average ionic radius. Similarly to Nd 2 GaSbO 7 , we find no evidence for moment fragmentation through our bulk characterization and neutron scattering experiments, indicating that chemical pressure (and not necessarily the B-site disorder) plays a key role in the presence or absence of this phenomenon in this material family. Surprisingly, the presence of significant B-site disorder in Nd 2 GaSbO 7 does not generate a spin-glass ground state and instead the same all-in-all-out magnetic order identified in other Nd pyrochlores is found here.

36 MATERIALS SCIENCE↗

Evaluation of chromatographic resins for high efficacy separation of radium from chemical analogues

The separation of Radium (Ra) from interfering chemical analogues is of major importance for both the accurate measurement of Ra-226 in environmental samples and the preparation of radium targets destined for medical isotope production. The adsorption behavior of Ra, Barium (Ba), and Strontium (Sr) was investigated on multiple crown-ether-based proprietary extraction chromatographic resins developed by TrisKem Int. Among these, the TK101 resin, characterized by a novel room-temperature ionic liquid (RTIL) dual extractant–solvent system, demonstrated enhanced affinity and selectivity, particularly at low acid concentrations, achieving a D w of 3477 ± 73 for Ra in 0.04 M HNO₃, whereas the maximum Ra D w obtained with the traditional Sr resin in 8 M HNO 3 was only 12.33 ± 0.4. In 0.04 M HNO 3 , a Ra distribution ratio (D w ) of 776 was achieved within 1 min, indicating rapid uptake kinetics. The adsorption capacities were estimated at 19.6 ± 0.1 mg/g for Ba and 12.0 ± 0.2 mg/g for Sr. However, competing alkali metals significantly reduced alkaline earth metal uptake, indicating that the TK101 resin is best suited for radium purification following a preconcentration step to minimize matrix effects in high salinity samples. Dynamic column studies confirmed the strong chromatographic performance of the TK101 resin, with no significant Ba or Sr breakthrough in the Ra fraction and a Ra recovery of 87 ± 2.8%. These results demonstrate the potential of the TK101 resin for selective radium separation in analytical and radiochemical applications.

and nuclear chemistry↗

Effect of microphase separation on the limiting current density in hybrid organic-inorganic copolymer electrolytes

Hybrid organic-inorganic block copolymer electrolytes are of interest to enable batteries containing lithium metal anodes. The conductive block is a standard polymer electrolyte of poly(ethylene oxide) and the mechanically rigid block is an inorganic poly(acryloisobutyl polyhedral oligomeric silsesquioxane) polymer. Here, in this paper, we compare a poly(acryloisobutyl polyhedral oligomeric silsesquioxane)-b-poly(ethylene oxide)-b-poly(acryloisobutyl polyhedral oligomeric silsesquioxane) (POSS-PEO-POSS) triblock copolymer and a poly(ethylene oxide)-b- poly(acryloisobutyl polyhedral oligomeric silsesquioxane) (PEO-POSS) diblock copolymer mixed with lithium bis(trifluoromethanesulfonyl)imide salt. We have experimentally measured the limiting current density in lithium symmetric cells containing hybrid organic-inorganic electrolytes at 90 °C. The cells were polarized at a large range of applied current density. The diblock copolymer electrolyte exhibited a clear plateau in cell potential at all current densities below the limiting current density. At low applied current density, the triblock copolymer electrolyte also exhibited a clear plateau in cell potential. At currents approaching the limiting current density, the triblock copolymer electrolyte exhibited an underdamped potential profile. The cell potential did not reach a plateau at current densities above the limiting current in both systems. The diblock and triblock copolymer electrolytes were fully characterized using electrochemical methods to determine the ionic conductivity, cation current fraction, salt diffusion coefficient, and open circuit voltage as a function of salt concentration. Cell potential and salt concentration as functions of position in the cell at various current densities were calculated using Newman's concentrated solution theory. The theoretical limiting current density was calculated to be the current density at which salt is depleted at the cathode. We see quantitative agreement between experimental measurements and theoretical predictions for the limiting current density in the diblock copolymer electrolyte which has an ordered structure at all salt concentrations, while the experimental limiting current density is lower than the theoretical prediction for the triblock copolymer electrolyte, which exhibits a disordered morphology at high salt concentrations.

25 ENERGY STORAGE↗

Disentangling Acid‐Base Chemistry through Blue Shifting Hydrogen Bond Contributions

The blue shifting of vibrational frequencies in hydrogen bonded molecules, as observed in aqueous environments, has been attributed to local partial charge transfer from solvation. Here, in this study, we extrapolate the blue shift model to the stronger ionic interactions between hydrogen bond acceptors associated with protonation through augmented pH levels and competitive interactions with counter ion pairing. The chemical model we utilize in this work is the aqueous pyridine‐pyridinium equilibrium to characterize the blue shifts observed in the pyridinium chloride ionic system. The observed agreement between observed experimental and calculated spectral shifts shows that the blue shifting model can be extrapolated to stronger interactions and accurately describe the nature of the hydrogen bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing the Structural Evolution of Green Rust Synthesized in Ionic Liquids by In Situ Molecular Imaging

Abstract Ionic liquids are green solvents that have wide applications in material synthesis, catalysis, and separation. A model switchable ionic liquid (SWIL) consisting of 1,8‐diazabicycloundec‐7‐ene (DBU) and 1‐hexanol with carbon dioxide (CO 2 ) as the trigger gas is chosen to synthesize nanocrystalline green rust. Under anoxic conditions, by adding iron (II) acetate (Fe(C 2 H 3 O 2 ) 2 ) and methanol to the degassed SWIL, a nanoparticulate green rust with carbonate (nano‐GR) is synthesized. More importantly, the molecular structural change of the ionic liquid resulting in green rust crystallines is first characterized using in situ liquid using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) coupled with the system for analysis at the liquid vacuum interface (SALVI), a vacuum compatible microfluidic reactor in this work. Dimers and ionic clusters consisting ferric and ferrous ions are identified in liquid ToF‐SIMS spectra. Spectral principal component analysis is used to confirm that these ion pairs including dimers and cluster ions are different from nonionic liquids. The results show that liquid ToF‐SIMS can be a useful tool to study complex liquids at the molecular level providing insights into predicative synthesis of nanomaterials using environmentally friendly green solvents and giving unique visualization of the evolving material interface due to nucleation.

Shen, Yanjie↗

Argyrodite-type advanced lithium conductors and transport mechanisms beyond paddle-wheel effect

Abstract Development of next-generation solid-state Li-ion batteries requires not only electrolytes with high room-temperature (RT) ionic conductivities but also a fundamental understanding of the ionic transport in solids. In spite of considerable work, only a few lithium conductors are known with the highest RT ionic conductivities ~ 0.01 S/cm and the lowest activation energies ~0.2 eV. New design strategy and novel ionic conduction mechanism are needed to expand the pool of high-performance lithium conductors as well as achieve even higher RT ionic conductivities. Here, we theoretically show that lithium conductors with RT ionic conductivity over 0.1 S/cm and low activation energies ~ 0.1 eV can be achieved by incorporating cluster-dynamics into an argyrodite structure. The extraordinary superionic metrics are supported by conduction mechanism characterized as a relay between local and long-range ionic diffusions, as well as correlational dynamics beyond the paddle-wheel effect.

25 ENERGY STORAGE↗

Effects of Dimethylamino Functional Group Substitution on the Physical, Structural and Radiolytic Properties of Pyridinium Ionic Liquids

A diverse range of 4-dimethylaminopyridinium (DMAP) bis(trifluoromethylsulfonyl)-amide ionic liquids with specific functionalities (alkyl, alkoxy, hydroxyalkyl and benzyl) were designed, characterized and compared with their pyridinium analogs in terms of their physical and radiolytic properties. The influence of the dimethylamino group on ionic liquid structure was investigated by X-ray diffraction and molecular dynamics simulations. The influence of the electron-donating ability of the dimethylamino-substituted cation is evident in the differences in the electronic density of states between the DMAP and pyridinium ILs. This leads to substantial changes in the radical transients observed in pulse radiolysis of the neat ILs. It was found that the DMAP salts were higher melting, more viscous and less conducting than their pyridinium analogs. However, the DMAP salts exhibited higher thermal stabilities and could therefore be useful for high-temperature applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mixed Ionic Electronic Conducting Quaternary Perovskites: Materials by Design for Solar Thermochemical Hydrogen

The innovative research conducted by Arizona State University and Princeton University in the project "Mixed Ionic-Electronic Conducting Quaternary Perovskites: Materials by Design for Solar Thermochemical Hydrogen" marks a significant stride forward in thermochemical water splitting. Through an intricate blend of computational design and experimental validation, the project delved into the promising potential of Mixed Ionic Electronic Conducting (MIEC) perovskites. These complex materials, characterized by their unique redox-active nature and adaptability in stoichiometry, present a promising frontier for efficient solar thermochemical hydrogen production. Firstly, the research enhanced the science by utilizing state-of-the-art computational methodologies to unravel the nuanced chemical potentials of MIEC perovskites. By simulating various off-stoichiometric scenarios and redox conditions, the team was able to predict material behaviors under diverse environmental conditions, a feat unachievable through conventional experimental methodologies alone. This approach not only fast-tracks the material screening process, significantly reducing the time from laboratory re-search to practical application, but also uncovers trends and correlations that are pivotal for future materials innovation. Regarding technical effectiveness, the project stands out in its economic feasibility. Traditional methods of materials discovery are often marred by high costs and extensive timeframes, owing to the iterative nature of experimental processes. However, by employing theoretical computations and validating these findings with targeted experiments, the project introduced a cost-effective paradigm for materials discovery and the first ever prediction, synthesis, and preliminary validation of a material solely from computational and theoretical considerations. This synergy between computation and experimentation expedites the discovery of optimal materials conducive to high-efficiency solar-to-hydrogen conversion processes. Furthermore, the public stands to benefit substantially from this research. The success of MIEC perovskites in solar thermochemical applications heralds a shift towards lower cost and lower electricity input for clean hydrogen production, hence potentially impacting climate and energy resilience. By improving the efficiency of solar-to-hydrogen conversions, the research paves the way for reduced dependency on fossil fuels, addressing the urgent global need for accessible and renewable energy sources. Moreover, the project's advancements contribute to scientific literacy in renewable energy technologies, empowering society through knowledge and spurring future innovations. In essence, this research project demonstrates significant progress in the realm of advanced water splitting through solar thermochemistry. Through its groundbreaking approaches in computational materials science and its implications for real-world applications, it holds the promise of a cleaner, more energy-resilient future.

08 HYDROGEN↗

Photoinduced correlations in stochastic dynamics of a solid-state ionic conductor

Photoexcitation by ultrashort laser pulses plays a crucial role in controlling reaction pathways, creating nonequilibrium material properties, and probing complex molecular dynamics. The photoresponse following a laser pulse is generally nonidentical between exposures due to spatiotemporal fluctuations or the stochastic nature of dynamical pathways. However, most ultrafast pump-probe experiments struggle to distinguish intrinsic sample fluctuations from extrinsic apparatus noise, often missing deviations from the averaged response. Leveraging the stability and high photon flux of time-resolved X-ray micro-diffraction at a synchrotron, we characterized stochastic photoinduced dynamics in a solid-state ionic conductor. By analyzing temporal evolutions of the lattice parameter of a single grain, we found that shot-to-shot fluctuations are not independent. Instead, correlations exist between nonequilibrium lattice trajectories following adjacent shots, with a characteristic correlation length of approximately 1500 shots, corresponding to an energy barrier of 0.4 ± 0.1 eV, close to the activation energy of lithium-ion diffusion.

36 MATERIALS SCIENCE↗