Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic liquid crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Characterization of rhenium oxide films and their application to liquid crystal cells

Rhenium trioxide exhibits high electronic conductivity, while its open cubic crystal structure allows an appreciable hydrogen intercalation, generating disordered solid phases, with protonic conductivity. Rhenium oxide thin films have been obtained by thermal evaporation of ReO{sub 3} powders on different substrates, maintained at different temperatures, and also by reactive magnetron sputtering of a Re metallic target. A comparative investigation has been carried out on these films, by using micro-Raman spectroscopy and x-ray diffraction. Two basic types of solid phases appear to grow in the films: a red metallic H{sub x}ReO{sub 3} compound, with distorted perovskite structures, like in the bulk material, and ordered HReO{sub 4} crystals based on tetrahedral perrhenate ions. Because of its conduction properties, the electrical and electro-optical behaviors of ReO{sub 3} films deposited on standard indium tin oxide/glass substrate have been tested inside asymmetric nematic liquid crystal cells, showing an appreciable capability of rectification of their electro-optical response, in similar way to tungsten trioxide.

36 MATERIALS SCIENCE↗

Fluoroalkyl-functional imidazoles and imidazolium–based ionic liquids prepared via thiol-ene/yne click chemistry

A fluorinated thiol was systematically investigated against a diverse set of –ene- and –yne-bearing imidazole and imidazolium substrates in the pursuit of new cation-fluorinated, omniphobic (hydrophobic and oleophobic) ionic liquids for aerospace applications. Compounds were prepared using UV-initiated click chemistry at quantitative conversion and purified with relative ease. Seven ionic liquids were synthesized and have isolated yields ranging from 74% to >99%. Five of the new cation-fluorinated ionic liquids are hydrophobic and two are liquids at room temperature. In addition to hydrophobicity, the seven ionic liquids’ solubilities were qualitatively examined across a wide spectrum of conventional organic solvents. Of note, the majority of the prepared ionic liquids are insoluble in water and hexanes yet soluble in methanol, acetone, acetonitrile, and dichloromethane. In addition to intriguing solubility properties, the ionic liquids in this study have high densities without the incorporation of heavy atoms, ranging from 1.596 to 1.924 g cm –3 . The fluorinated salts also show good short-term thermal stability in air, with decomposition temperatures ranging from 215 °C to 320 °C. Other relevant characterization methods include spectroscopy, thermal analysis, and physical property measurements where appropriate. The X-ray crystal structure of a divalent, cation-fluorinated ionic liquid from this study was also obtained and shows unique fluorous domains in the extended structure, providing valuable insight into the materials’ physical properties. Furthermore, this work highlights a family of compounds moving towards omniphobic ionic liquids yielding potential possibilities for future applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning metal–carboxylate coordination in crystalline metal–organic frameworks through surfactant media

Although it has been widely demonstrated that surfactants can efficiently control the size, shape and surface properties of micro/nanocrystals of metal–organic frameworks (MOFs) due to the strong interactions between surfactants and crystal facets of MOFs, the use of surfactants as reaction media to grow MOF single crystals is unprecedented. In addition, compared with ionic liquids, surfactants are much cheaper and can have multifunctional properties such as acidic, basic, neutral, cationic, anionic, or even block. These factors strongly motivate us to develop a new synthetic strategy: growing crystalline MOFs in surfactants. In this report, eight new two-dimensional (2D) or three-dimensional (3D) MOFs have been successfully synthesized in an industrially-abundant and environmentally-friendly surfactant: polyethylene glycol-200 (PEG-200). Eight different coordination modes of carboxylates, ranging from monodentate η{sup 1} mode to tetra-donor coordination µ{sub 3}-η{sup 1}:η{sup 2}:η{sup 1} mode, have been founded in our research. The magnetic properties of Co-based MOFs were investigated and MOF NTU-Z6b showed a phase transition with a Curie temperature (T{sub c}) at 5 K. Our strategy of growing crystalline MOFs in surfactant could offer exciting opportunities for preparing novel MOFs with diverse structures and interesting properties. - Graphical abstract: Surfactants have been used as reaction media to grow MOF single crystals for the first time. Eight new two-dimensional or three-dimensional MOFs were successfully synthesized in surfactant polyethylene glycol-200 (PEG-200). Coordination modes of carboxylates up to eight were founded. Our strategy of growing crystalline MOFs in surfactant could offer exciting opportunities for preparing novel MOFs with diverse structures and interesting properties. Display Omitted - Highlights: • Surfactant-thermal synthesis of crystalline metal–organic frameworks. • Eight new 2-D or 3-D metal–organic frameworks. • Eight different metal–carboxylate coordination modes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of ionic liquids on cation dynamics in amorphous polyethylene oxide electrolytes

We perform extensive molecular dynamics simulations of a poly(ethylene oxide)-based polymer electrolyte material containing lithium bis(trifluoromethanesulfonyl)imide salt for a wide temperature regime above and below the experimental crystallization temperature with and without N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide ionic liquid (IL). The impact of the IL-concentration on the cation dynamics is studied. The increase of the cation mobility upon addition of IL is significant but temperature-independent. This can be related to distinct variations of the underlying transport properties as expressed within the previously introduced transport model of polymer electrolytes. Even for the largest IL concentration the transport model perfectly predicts the non-trivial time-dependence of the cationic mean square displacement for all temperatures. Finally, we compare our numerical and theoretical findings with the results of recent nuclear magnetic resonance experiments. In this way we can exclusively relate the strong experimentally observed dependence of the low-temperature Li-diffusivity on the IL concentration to the impact of IL on crystallization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of hollow mesoporous NiO hexagonal microspheres via hydrothermal process in ionic liquid

Highlights: Black-Right-Pointing-Pointer Ni(OH){sub 2} precursors were synthesized in ionic liquid and water solution by hydrothermal method. Black-Right-Pointing-Pointer NiO hollow microspheres were prepared by thermal treatment of Ni(OH){sub 2} precursors. Black-Right-Pointing-Pointer NiO hollow microspheres were self-assembled by mesoporous cubic and hexagonal nanocrystals with high specific surface area. Black-Right-Pointing-Pointer The mesoporous structure is stable at 773 K. Black-Right-Pointing-Pointer The ionic liquid absorbed on the O-terminate surface of the crystals to form hydrogen bond and played key roles in determining the final shape of the NiO novel microstructure. -- Abstract: The novel NiO hexagonal hollow microspheres have been successfully prepared by annealing Ni(OH){sub 2}, which was synthesized via an ionic liquid-assisted hydrothermal method. The samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), N{sub 2} adsorption-desorption and Fourier transform infrared spectrometer (FTIR). The results show that the hollow NiO microstructures are self-organized by mesoporous cubic and hexagonal nanocrystals. The mesoporous structure possessed good thermal stability and high specific surface area (ca. 83 m{sup 2}/g). The ionic liquid 1-butyl-3methylimidazolium tetrafluoroborate ([Bmim][BF{sub 4}]) was found to play a key role in controlling the morphology of NiO microstructures during the hydrothermal process. The special hollow mesoporous architectures will have potential applications in many fields, such as catalysts, absorbents, sensors, drug-delivery carriers, acoustic insulators and supercapacitors.

36 MATERIALS SCIENCE↗

In situ polymerized succinonitrile-based solid polymer electrolytes for lithium ion batteries

Novel solid polymer electrolytes based on succinonitrile (SN) plastic crystal electrolyte (SN-PCE) and polymerized ionic liquid (PIL) has been successfully synthesized via an in-situ method. The fabricated electrolyte (PIL-SN-PCE) is uniformly inlayed into the supporting matrix of polyimide, which effectively ameliorates the mechanical properties of the electrolyte. PIL can effectively enhance the thermal stability of electrolytes up to 300 °C and mitigate the parasitic reactions between the electrolytes and the electrodes. PIL-SN-PCE exhibits a remarkable oxidation ability up to 5.4 V vs Li/Li + and a high room temperature ionic conductivity of 6.54 × 10 -4 S cm -1 . Furthermore, in-situ formed interface in PIL-SN-PCE guarantee an excellent compatibility with different electrodes, which can effectively improve the cycle stability and rate performances of both half-cells and full cells. Finally, PIL-SN-PCE is considered as a promising electrolyte for high energy density lithium-ion batteries.

25 ENERGY STORAGE↗

Overcoming the phase separation within high-entropy metal carbide by poly(ionic liquid)s

High-entropy crystalline materials are attracting more attention. In principle, high-entropy metal carbides (HMCs) that contain five or more metal ions, possess more negative free energy value during catalysis. But its preparation is challenging because of the immiscibility of multi metal cations in a single carbide solid solution. Here, a rational strategy for preparing HMC is proposed via a coordination-assisted crystallization process in the presence of Br-based poly(ionic liquids). Through this method, Mo 0.2 W 0.2 V 0.2 Cr 0.2 Nb 0.2 C nanoparticles, with a single cubic phase structure, incorporated on porous carbon, are obtained (HMC@NC). By combination of well dispersed small particle size (~4 nm), high surface area (~270 m 2 g –1 ), and high-entropy phase, HMC@NC can function as a promising catalyst for the dehydrogenation of ethylbenzene. Here, unexpected activity (EB conv.: 73%) and thermal stability (>100 h on steam) at 450 °C are observed. Such a facile synthetic strategy may inspire the fabrication of other types of HMCs for more specific tasks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the Interactions of Seawater Ions with Amidoxime through X-Ray Crystallography

Insoluble polymer substrates functionalized with the amidoxime (R-C(NH 2 )=NOH) functional group have been demonstrated as a technically feasible platform for extracting uranium from seawater, a potential source of extremely abundant uranium for use as nuclear fuel. While it is possible to isolate macroscopic amounts of uranium from the ocean with a positive energy return on investment using these materials, both the economic and energetic costs are many times greater than those of terrestrial uranium mining. Currently, the major contribution to this cost is the production of the sorbent itself, so being able to recycle the sorbent even a small number of times will have a huge impact on lowering the cost of their use. However, amidoxime resins show capacity fading when stripped by strong acids, presently limiting their recyclability. Both alternative extractants and alternative elution chemistries are under development with promising results but are yet at too early a stage to make predictions about their ultimate success. Given the potentially huge impact of a successful recycling process on the viability of seawater extraction of uranium, there is a strong need to pursue additional routes to elution chemistry. During the course of this project, we studied the interactions of amidoxime-containing small molecules with the abundant metal ions in seawater, including Li, Na, K, Mg, Ca, Fe, Cu, and V, to understand the interactions of [UO 2 ] 2+ with amidoxime. By using small molecules with multiple adjacent functional groups, we crystallized the resulting metal complexes and used single crystal X-ray diffraction (SCXRD) as our primary tool for structural characterization. We also investigated the use of solutions of hydroxylammonium salts in weak acids as eluents for stripping and recycling amidoxime-based sorbents. The replacement of strong acids, which react with and destroy the amidoxime functional groups, with weak acids based on hydroxylammonium, a reagent that is actually used to make the amidoxime groups, is expected to avoid capacity loss on recycling and possibly even regenerate functionality that was lost due to exposure to the marine environment.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Comparing two tetraalkylammonium ionic liquids. II. Phase transitions

Phase transitions of the ionic liquids n-butyl-trimethylammonium bis(trifluoromethanesulfonyl)imide, [N{sub 1114}][NTf{sub 2}], and methyl-tributylammonium bis(trifluoromethanesulfonyl)imide, [N{sub 1444}][NTf{sub 2}], were investigated by differential scanning calorimetry (DSC), X-ray diffraction (XRD) measurements, and Raman spectroscopy. XRD and Raman spectra were obtained as a function of temperature at atmospheric pressure, and also under high pressure at room temperature using a diamond anvil cell (DAC). [N{sub 1444}][NTf{sub 2}] experiences glass transition at low temperature, whereas [N{sub 1114}][NTf{sub 2}] crystallizes or not depending on the cooling rate. Both the ionic liquids exhibit glass transition under high pressure. XRD and low-frequency Raman spectra provide a consistent physical picture of structural ordering-disordering accompanying the thermal events of crystallization, glass transition, cold crystallization, pre-melting, and melting. Raman spectra in the high-frequency range of some specific cation and anion normal modes reveal conformational changes of the molecular structures along phase transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave-assisted synthesis and characterization of hierarchically structured calcium fluoride

Graphical abstract: CaF{sub 2} with different morphologies and hierarchical structure such as dendrites, spherical and cube was prepared under microwave-assisted condition by a simple solvothermal synthesis route using CaCl{sub 2} and [BMIM]BF{sub 4} as initial reagents, respectively. It was found that the species of precursor was of vital importance for the formation of CaF{sub 2} crystals. That is, precursors itself also acted as structure directing agent. The outstanding features of the approach to obtain hierarchical structure CaF{sub 2} were its simplicity, effectiveness and ease of assembly. On the basis of the experimental results, a possible growth mechanism of the CaF{sub 2} crystals was proposed. Display Omitted Highlights: ► CaF{sub 2} with hierarchical structure was synthesized under microwave-assisted conditions. ► Characteristic morphologies with cube, dendrite, hierarchical sphere, etc. were observed. ► Thin cubes assembled into a spherical structure. ► Ionic liquid of [BMIM]BF{sub 4} was fluorine source. ► Possible growth mechanisms of CaF{sub 2} crystals were discussed. -- Abstract: CaF{sub 2} with different morphologies and hierarchical structures was prepared under microwave-assisted condition by a simple hydrothermal route using CaCl{sub 2} and ionic liquid [BMIM]BF{sub 4} as initial reagents, respectively. It was found that both the precursor and pH values played an important role in the formation of CaF{sub 2} crystals with different morphologies. The results suggested that the CaF{sub 2} with cube and spherical structures was obtained at different pH values (4, 8, 11), while the CaF{sub 2} with dendrite shape was formed through an oriented self-assembly growth using (NH{sub 4}){sub 2}HPO{sub 4} as a structure directing agent. Scanning electron microscope observation showed that the as-prepared CaF{sub 2} was of three-dimensional eight-horn-shaped dendritic structure. The influence of the pH values for the reaction solution and precursors has been discussed in detail. On the basis of the experimental results, possible growth mechanisms of the CaF{sub 2} microcrystals were proposed.

36 MATERIALS SCIENCE↗

Synthesis and ionic liquid gating of hexagonal WO{sub 3} thin films

Via thin film deposition techniques, the meta-stable in bulk crystal hexagonal phase of tungsten oxide (hex-WO{sub 3}) is stabilized as a thin film. The hex-WO{sub 3} structure is potentially promising for numerous applications and is related to the structure for superconducting compounds found in WO{sub 3}. Utilizing ionic liquid gating, carriers were electrostatically induced in the films and an insulator-to-metal transition is observed. These results show that ionic liquid gating is a viable technique to alter the electrical transport properties of WO{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid Membrane-based Ionic Liquid Absorption Cycle for Water Heating, Dehumidification, and Cooling

To meet the growing energy consumption and mitigate climate concerns, novel energy efficient technologies need to be developed. Water heating, dehumidification and space cooling form a significant percentage (~24%) of a typical U.S. household energy consumption and a total of 2.6 quad of primary energy consumption. In this paper, we present a novel system for combined water heating, dehumidification, and space cooling. The three processes can be achieved by one device using a novel semi-open absorption based system combined with evaporative cooling. The absorption based system absorbs water vapor from its ambient. The latent heat of absorption, released into the absorbent, is transferred into the process water that cools the absorbent. The water absorbed is later released in the desorber through heating, and the water vapor generated in the desorber is condensed and its heat of phase change is transferred to the process water in the condenser. The condensed water vapor can either be drained if dehumidification is desired or be used in an evaporative cooling process for space cooling. The major innovations that enable such an absorption-based device are demonstrated in this study through an experimental test setup. First, a membrane based absorption system in a compact and scalable platform is used to alleviate the liquid entrainment issue encountered in the conventional packed bed absorbers. Second, architecture reconfigurations, like novel fluid circuits and semi-open absorption system are deployed to enhance performance and lower system cost. Finally, an ionic liquid is implemented to minimize corrosion and eliminate crystallization risks, a major concern with conventional salts. The water heating and dehumidification component of the device are experimentally evaluated and the device is characterized for various system parameters. A water heating COP of 1.4 is achieved in this first generation prototype. These innovations pave the way for a compact, efficient, and low cost absorption based system for residential scale applications.

CHUGH, Devesh↗

Kinetic study of the hydrogen charging reaction on the graphite e in aqueous solution and in room temperature ionic liquid (RTIL)

Electrochemical impedance spectroscopy and other electrochemical methods were used to study the kinetics of hydrogen entry into porous, isotropic graphite and a single crystal graphite surfaces upon cathodic hydrogen charging and to calculate the hydrogen adsorption efficiencies. This model was first applied to graphite in an aqueous, alkaline solution, then in a room-temperature ionic liquid (RTIL), and, ultimately will be applied to FliNaK molten salt systems in future work. The results demonstrate that our model accurately describes the entry of hydrogen into graphite in harsh environments, which are important for the development of molten salt reactors (MSRs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Dynamics and Evolution of Bismuth Electrodes during Electrochemical Reduction of CO 2 in Imidazolium-Based Ionic Liquid Solutions

Real-time changes in the composition and structure of bismuth electrodes used for catalytic conversion of CO2 into CO were examined via X-ray absorption spectroscopy (including XANES and EXAFS), electrochemical quartz crystal microbalance (EQCM), and in situ X-ray reflectivity (XR). Measurements were performed with bismuth electrodes immersed in acetonitrile (MeCN) solutions containing a 1-butyl-3-methylimidazolium ([BMIM]+) ionic liquid promoter or electrochemically inactive tetrabutylammonium supporting electrolytes (TBAPF6 and TBAOTf). Altogether, these measurements show that bismuth electrodes are originally a mixture of bismuth oxides (including Bi2O3) and metallic bismuth (Bi0) and that the reduction of oxidized bismuth species to Bi0 is fully achieved under potentials at which CO2 activation takes place. Furthermore, EQCM measurements conducted during cyclic voltammetry revealed that a bismuth-coated quartz crystal exhibits significant shifts in resistance (ΔR) prior to the onset of CO2 reduction near -1.75 V vs Ag/AgCl and pronounced hysteresis in frequency (Δf) and ΔR, which suggests significant changes in roughness or viscosity at the Bi/[BMIM]+ solution interface. In situ XR performed on rhombohedral Bi (001) oriented films indicates that extensive restructuring of the bismuth film cathodes takes place upon polarization to potentials more negative than -1.6 V vs Ag/AgCl, which is characterized by a decrease of the Bi (001) Bragg peak intensity of ≥50% in [BMIM]OTf solutions in the presence and absence of CO2. Over 90% of the reflectivity is recovered during the anodic half-scan, suggesting that the structural changes are mostly reversible. In contrast, such a phenomenon is not observed for thin Bi (001) oriented films in solutions of tetrabutylammonium salts that do not promote CO2 reduction. Overall, these results highlight that Bi electrodes undergo significant potential-dependent chemical and structural transformations in the presence of [BMIM]+-based electrolytes, including the reduction of bismuth oxide to bismuth metal and changes in roughness and near-surface viscosity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The factors during protein crystallization: A review

Many factors have effects on crystallization. The major influencing factors during protein crystallization are summarized in this paper. Recommendations are made about the basic process of crystallization and the analysis of the thermodynamic effects on crystallization, and the dynamics factors effecting crystallization during an equilibrium process are discussed. The advantages of ionic liquid in various chemical processes, especially in the field of biochemistry, are emphasized, and some tentative conclusions are made about future short-term trends.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synergistic Effects of Mixing Sulfone and Ionic Liquid as Safe Electrolytes for Lithium Sulfur Batteries

Here we report a strategy of mixing both the ionic liquid and sulfone with synergistic effects of reducing viscosity, increasing ionic conductivity, reducing the polysulfide dissolution, and improving the safety. The mixtures of the ionic liquids and sulfones also show distinctly different physicochemical properties, including the thermal properties and crystallization behavior. Using these electrolytes, lithium sulfur batteries assembled with lithium and mesoporous carbon composites show a reversible specific capacity of 1265 mAh g-1 (second cycle) by using 40% 1.0 M LiTFSI in MPPY∙TFSI with 60% 1.0 M LiTFSI in MIPS in the first cycle. This capacity is slightly lower than what was obtained in the pure 1.0 M LiTFSI in the sulfone electrolytes; however, it exhibits an excellent cycling stability and remains as high as 655 mAh g-1 even after 50 cycles. Our strategy provides a method to alleviate the polysulfide dissolution and redox shuttle phenomenon, with an improved ionic conductivity at the same time.

electrochemistry↗

Iron hydroxyl phosphate microspheres: Microwave-solvothermal ionic liquid synthesis, morphology control, and photoluminescent properties

A variety of iron hydroxyl phosphate (NH{sub 4}Fe{sub 2}(PO{sub 4}){sub 2}OH.2H{sub 2}O) nanostructures such as solid microspheres, microspheres with the core in the hollow shell, and double-shelled hollow microspheres were synthesized by a simple one-step microwave-solvothermal ionic liquid method. The effects of the experimental parameters on the morphology and crystal phase of the resultant materials were investigated. Structural dependent photoluminescence was observed from the double-shelled hollow microspheres and the underlying mechanisms were discussed. - Graphical abstract: A variety of iron hydroxyl phosphate (NH{sub 4}Fe{sub 2}(PO{sub 4}){sub 2}OH.2H{sub 2}O) nanostructures were synthesized by a simple one-step microwave-solvothermal ionic liquid method. Structural dependent photoluminescence was observed from the double-shelled hollow microspheres.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ionic Liquid Gating of SrTiO 3 Lamellas Fabricated with a Focused Ion Beam

Here, in this work, we combine two previously incompatible techniques for defining electronic devices: shaping three-dimensional crystals by focused ion beam (FIB), and two-dimensional electrostatic accumulation of charge carriers. The principal challenge for this integration is nanometer-scale surface damage inherent to any FIB-based fabrication. We address this by using a sacrificial protective layer to preserve a selected pristine surface. The test case presented here is accumulation of 2D carriers by ionic liquid gating at the surface of a micron-scale SrTiO 3 lamella. Preservation of surface quality is reflected in superconductivity of the accumulated carriers. This technique opens new avenues for realizing electrostatic charge tuning in materials that are not available as large or exfoliatable single crystals, and for patterning the geometry of the accumulated carriers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗