Search NASA⌕ Search

SEARCH · Search NASA

Results for “isotherm modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

A Modeling Investigation of Thermal and Strain Induced Recovery and Nonlinear Hardening in Potential Based Viscoplasticity

Specific forms for both the Gibb's and the complementary dissipation potentials were chosen such that a complete potential based multiaxial, isothermal, viscoplastic model was obtained. This model in general possesses three internal state variables (two scalars associated with dislocation density and one tensor associated with dislocation motion) both thermal and dynamic recovery mechanisms, and nonlinear kinematic hardening. This general model, although possessing associated flow and evolutionary laws, is shown to emulate three distinct classes of theories found in the literature, by modification of the driving threshold function F. A parametric study was performed on a specialized nondimensional multiaxial form containing only a single tensorial internal state variable (i.e., internal stress). The study was conducted with the idea of examining the impact of including a strain-induced recovery mechanism and the compliance operator, derived from the Gibb's potential, on the uniaxial and multiaxial response. One important finding was that inclusion of strain recovery provided the needed flexibility in modeling stress-strain and creep response of metals at low homologous temperatures, without adversely affecting the high temperature response. Furthermore, for nonproportional loading paths, the inclusion of the compliance operator had a significant influence on the multiaxial response, but had no influence on either uniaxial or proportional load histories.

Arnold, S. M.↗
NASA NTRS1979

On the simulation of the oceanic general circulation

Two global ocean simulations based on the physics of a highly viscous ocean are discussed, one having realistic atmospheric functions for calculating the thermal forcing of the ocean. The velocity field of this model compares reasonably well with the relatively small amount of real data available. Temperature and heat budget components of the model reproduce best the equatorial band of heating. A simulation based upon the physics of a weakly viscous ocean is described, which produces the correct pattern of isotherms. This model has not yet been run to thermal equilibrium. The Gulf Stream and eddies and their influence on the oceanic and atmospheric heat budgets are discussed in the terms of their importance in coupled ocean-atmosphere models.

Mintz, Y.↗
NASA NTRS1991

Statistics of gravitational lenses - The uncertainties

The assumptions in the analysis of gravitational lensing statistics are examined. Special emphasis is given to the uncertainties in the theoretical predictions. It is shown that a simple redshift cutoff model, which may result from galaxy evolution, can significantly reduce the lensing probability and explain the large mean separation of images in observed gravitational lenses. This effect may affect the constraint on the contribution of the cosmological constant to producing a flat universe from the number counts of the observed lenses. For the Omega(0) = 1 (filled beam) model, the lensing probability of early-type galaxies with finite core radii is reduced roughly by a factor of 2 for high-redshift quasars as compared with the corresponding singular isothermal sphere model. The finite core radius effect is about 20 percent for a lambda-dominated flat universe. It is also shown that the most recent galaxy luminosity function gives lensing probabilities that are smaller than previously estimated roughly by a factor of 3.

Mao, Shude↗
NASA NTRS1996

Modelling the Soft X-Ray and EUV Emission in Classical Novae: EUVE and ROSAT Observations of V1974 Cygni

We have conducted an extensive analysis of the observability of Classical Novae with the EUVE Lex/B and Al/Ti/C detectors. Predicted count rates have been computed using optically thin, isothermal plasma models for solar and metal-rich compositions, and hot ONeMg white dwarf model atmospheres. We find EUVE to be quite sensitive to both the EUV and soft X-ray emission emitted by the underlying hot white dwarf during novae outbursts, except for the coolest temperatures with very high intervening hydrogen column density. These results are used to interpret the emission detected during the EUVE all-sky survey of Nova Cygni 1992 (approx. = V1974 Cyg), 279-290 days after visual maximum. We find the best fit to the observed emission from V1974 Cyg arises from a hot ONeMg white dwarf with surface temperature approx. 4 x l0(exp 5) K and a mas of approx. 1.2 solar mass, and derive an interstellar hydrogen column density of approx. 3 x 10(exp 21)/sq cm. Virtually all this emission arises from supersoft X-rays rather than the EUV. We also report the detection of V1974 Cyg with the EUVE Deep Survey detector at 549 days after visual maximum. This observation is compatible with the above properties, indicating that the mechanism responsible for the soft X-ray emission, connected with the underlying white dwarf, had not yet entirely turned off. We also present analysis of a ROSAT PSPC observation which is contemporaneous with the EUVE survey observations; this independently confirms the high column density we derived from the EUVE survey observation. Light curves for the EUVE and ROSAT observations are presented. Statistical tests for variability show that all of these observations are indeed highly variable over various time scales. The EUVE survey data shows one day variations, the EUVE DS data show approx. 30 minute fluctuations, while the ROSAT data vary rapidly on time scales of seconds. The EUVE data shows no periodic variability on any time scale. The implications of the rapid variability are briefly discussed.

Stringfellow, Guy S.↗
NASA NTRS1978

Concerning isothermal self-similar blast waves. I - One-dimensional flow and its stability. II - Two-dimensional flow and its stability

One-dimensional self-similar isothermal flow behind a blast wave propagating in a medium whose density varies with distance is investigated for the cases of one-dimensional and two-dimensional flow. The isothermal flow model is adopted as an alternative to adiabatic models of self-similar flow, which neglect heat flux. The topology of the one-dimensional flow solutions, the singularities, and the influence of boundary conditions are discussed; the instability of the isothermal blast waves against nonself-similar perturbations is also considered. The number of critical points in the two-dimensional solutions is found to vary from the number in the one-dimensional problem.

Lerche, I.↗
NASA NTRS1976

Infrared thermal models for Saturn's ring

Infrared (10 and 20 microns) thermal emission data for Saturn's rings are discussed in terms of simple isothermal radiative transfer models of finite optical thickness. Recent brightness temperature measurements, corresponding to essentially maximum ring tilt, indicate that optical single scattering albedos less than 0.75 are required to provide sufficient heating of the ring material. Reconciliation with analyses of the optical scattering properties of the ring requires the backscattering efficiency to be even higher than for a macroscopic sphere. Historical brightness temperature measurements are used to show that no unique isothermal ring model exists. Instead, a temperature gradient perpendicular to the ring plane appears to be present.

Price, M. J.↗
NASA NTRS1999

Third and Final Shuttle Mission of the Isothermal Dendritic Growth Experiment Conducted: Highest Supercooling Ever Recorded Achieved

Dendrites describe the treelike crystal morphology commonly assumed in metals and alloys that freeze from supercooled or supersaturated melts. There remains a high level of engineering interest in dendritic solidification because the size, shape, and orientation of the dendrites determine the final microstructure of a material. It is the microstructure that then determines the physical properties of cast or welded products. Although it is well known that dendritic growth is controlled by the transport of latent heat from the moving solid-liquid interface, an accurate and predictive model has not yet been developed. The effects of gravity-induced convection on the transfer of heat from the interface have prevented adequate testing, under terrestrial conditions, of solidification models. The Isothermal Dendritic Growth Experiment (IDGE) constituted a series of three microgravity experiments flown aboard the Space Shuttle Columbia. The apparatus was used to grow and record dendrite solidification in the absence of gravity-induced convective heat transfer, thereby producing a wealth of benchmark-quality data for testing solidification models and theories.

Glicksman, Martin E.↗
NASA NTRS1998

Models of Plumes: Their Flow, Their Geometric Spreading, and Their Mixing with Interplume Flow

There are two types of plume flow models: (1) 1D models using ad hoc spreading functions, f(r); (2) MagnetoHydroDynamics (MHD) models. 1D models can be multifluid, time dependent, and incorporate very general descriptions of the energetics. They confirm empirical results that plume flow is slow relative to requirements for high speed wind. But, no published 1 D model incorporates the rapid local spreading at the base (fl(r)) which has an important effect on mass flux. The one published MHD model is isothermal, but confirms that if b=8*pi*p/absolute value(B)2<<l then the field is nearly potential below -70,000 km. Building on the MHD result, we apply a two scale approximation to calculate fl(r). We also compute the global spreading (fg(r)) out to 5.0 RSUN imposed by coronal hole geometry. Global MHD models provide a potent method of calculating fg(r). Unambiguous plume signatures have not yet been found in the solar wind. This is probably due to strong mixing of plume and interplume flows near the Sun. We describe a physical source for strong mixing due to the observed flows being unstable to shear instabilities that lead to rapid disruption.

Suess, Steven T.↗
NASA NTRS1988

A viscoplastic theory applied to copper

A phenomenologically based viscoplastic model is derived for copper. The model is thermodynamically constrained by the condition of material dissipativity. Two internal state variables are considered. The back stress accounts for strain-induced anisotropy, or kinematic hardening. The drag stress accounts for isotropic hardening. Static and dynamic recovery terms are not coupled in either evolutionary equation. The evolution of drag stress depends on static recovery, while the evolution of back stress depends on dynamic recovery. The material constants are determined from isothermal data. Model predictions are compared with experimental data for thermomechanical test conditions. They are in good agreement at the hot end of the loading cycle, but the model overpredicts the stress response at the cold end of the cycle.

Freed, Alan D.↗
NASA NTRS1979

Soft X-ray structure of the Coma cluster of galaxies

Results are reported for an observation of the Coma cluster with an imaging X-ray telescope system aboard a sounding rocket. A two-dimensional X-ray map of the cluster in the energy range from 0.15 to 2.0 keV is presented. The radial distribution, granularity, and ellipticity of the X-ray surface brightness are investigated, and the spectrum and flux within the field of view are analyzed. These properties are then examined quantitatively by comparing the observations with models through the use of a chi-squared test. It is found that: (1) no single galaxy contributes more than a few percent of the total X-ray flux of the Coma cluster; (2) the X-ray source is diffuse but granular on a scale of several arcmin, particularly in the central region; (3) the centroid of the X-ray source is at a local intensity minimum; and (4) the data are most consistent with an isothermal hydrostatic model.

Gorentstein, P.↗
NASA NTRS1965

Mechanical behavior of SBR-glass bead composites

Mechanical properties of stryene-butadiene rubber glass bead composites, and theoretical model on isothermal volume dilatation and stress-strain relationship in filler concentration

STRESS-STRAIN DISTRIBUTION↗
NASA NTRS1975

Studies of cluster X-ray sources, energy spectra for the Perseus, Virgo, and Coma clusters

Final Uhuru X-ray differential-energy spectra are presented for the Perseus, Virgo, and Coma clusters. Power-law and isothermal bremsstrahlung model spectra with low-energy cutoffs are given, and the energy-dependent Gaunt factor is calculated for the bremsstrahlung. The spectra, which are best fits to the Uhuru data between 2 and 10 keV, are compared with previous observations of these sources in the energy range from 0.1 to 100 keV. The problem of parameter estimation is discussed, error bars with 68% confidence are given for the independently determined slope and cutoff parameters, and the 68% confidence limits are plotted for the fitted spectral functions. The data for Perseus above 20 keV marginally favor the bremsstrahlung fit, those for Virgo between 0.25 and 1.0 keV clearly favor that curve, and those for Coma indicate a low-energy turnover or cutoff. Implications of such a cutoff are briefly discussed.

Kellogg, E.↗
NASA NTRS1978

The occultation of Epsilon Geminorum by Mars as observed at Princeton

Results are reported for two-color (red and blue) high-speed photometric observations of the April 8, 1976, occultation of Epsilon Gem by Mars. The observing system is briefly described, fits to an isothermal atmospheric model of the event are presented, and the blue data are used to derive temperature profiles of the Martian atmosphere in the manner of Wasserman and Veverka (1973). The results are compared with those of Elliot et al. (1977), which were obtained from the NASA Kuiper Airborne Observatory.

Groth, E. J.↗
NASA NTRS1978

Infrared excesses in early-type stars - Gamma Cassiopeiae

Spectrophotometry of the classical Be star Gamma Cas (1-4 microns, with about 2% spectral resolution) is presented. These data, together with existing broad-band observations, are accurately described by simple isothermal LTE models for the IR excess which differ from most previously published work in three ways: (1) hydrogenic bound-free emission is included; (2) the attenuation of the star by the shell is included; and (3) no assumption is made that the shell contribution is negligible in some bandpass. It is demonstrated that the bulk of the IR excess consists of hydrogenic bound-free and free-free emission from a shell of hot ionized hydrogen gas, although a small thermal component cannot be ruled out. The bound-free emission is strong, and the Balmer, Paschen, and Brackett discontinuities are correctly represented by the shell model with physical parameters as follows: a shell temperature of approximately 18,000 K, an optical depth (at 1 micron) of about 0.5, an electron density of approximately 1 trillion per cu cm, and a size of about 2 trillion cm. Phantom shells (i.e., ones which do not alter the observed spectrum of the underlying star) are discussed.

Scargle, J. D.↗
NASA NTRS1978

Soft X-ray structure of the Perseus cluster of galaxies

A 0.5-1.5-keV X-ray image of the Perseus cluster of galaxies was obtained with a focusing telescope system aboard a sounding rocket. The source consists of a region of diffuse emission plus a superposed central source in the vicinity of NGC 1275 smaller than 4 arcmin in diameter that accounts for one-quarter of the total intensity within a radius of 25 arcmin. The results for the diffuse source are consistent with the isothermal-hydrostatic picture in which the hot gas has a core radius of 17 arcmin and is approximately symmetric about NGC 1275. Several isothermal-hydrostatic models are considered which relate the size and temperature of the diffuse X-ray source with the core radius of the galaxies and their velocity dispersion. Fixing the velocity dispersion at values measured by Chincarini and Rood (1971) requires the core radius of the galaxies to be 28 + or - 9 arcmin, which is larger than present measurements. Conversely, fixing the core radius of the galaxies at 8 arcmin requires a smaller velocity dispersion or a condition in which the velocity distribution is anisotropic. Upper limits on the intrinsic X-ray absorption of the central source place the bulk of its X-ray emission beyond the nuclear region of NGC 1275.

Gorenstein, P.↗
NASA NTRS1982

Theoretical quasar emission-line ratios. V - Balmer continuum emission

Isothermal, isobaric models of quasar emission line regions are presented which include an improved treatment of radiative transfer in the bound-free continua, based on a generalization of frequency-integrated line transfer techniques and on the use of a probabilistic radiative transfer equation which explicitly distinguishes between the flux divergence coefficient and the photon escape probability. It is found that Balmer continuum emission can be obtained without compromising observed line ratios. It is also established that optically thin or thick Balmer continuum emission models with blended Fe II line are consistent with 4000-2000 A 'blue bump' observations, and that the improved radiative transfer treatment makes order-of-magnitude corrections to level populations and local cooling rates calculated with past techniques.

Puetter, R. C.↗
NASA NTRS1982

The resolution of P Cygni's stellar wind

The 6 cm radio emission from P Cygni's stellar wind has been resolved using the Very Large Array. The wind is apparently spherically symmetric, and the radial surface brightness distribution agrees with that predicted by the constant velocity, isothermal wind model. The wind temperature is directly determined from the observations to be within 2000 K of 18,000, which is consistent with an effective temperature of 20,000 K for P Cygni. The technique makes it possible to study the adiabatic cooling of the wind, which should be important for most early-type stars but which cannot be recognized through its effects on the radio spectrum. To avoid systematically underestimating fluxes, it is essential to fit models directly to the (u-v) data when observing stellar winds with the VLA.

White, R. L.↗